Into a first half that determines what operation to do, and a second
half that does it.
Currently the only operation is diffing one or more commits, but a
later patch will add diffing of trees, at which point this refactoring
will pay off.
Signed-off-by: Karl Hasselström <kha@treskal.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After finding a MIME multi-part message boundary line, the handle_body()
function is supposed to first flush any accumulated contents from the
previous part to the output stream. However, the code mistakenly output
the boundary line it found.
The old code that used one global, fixed-length buffer line[] used an
alternate static buffer newline[] for keeping track of this accumulated
contents and flushed newline[] upon seeing the boundary; when 3b6121f
(git-mailinfo: use strbuf's instead of fixed buffers, 2008-07-13)
converted a fixed-length buffer in this program to use strbuf,these two
buffers were converted to "line" and "prev" (the latter of which now has a
much more sensible name) strbufs, but the code mistakenly flushed "line"
(which contains the boundary we have just found), instead of "prev".
This resulted in the first boundary to be output in front of the first
line of the message.
The rewritten implementation of handle_boundary() lost the terminating
newline; this would then result in the second line of the message to be
stuck with the first line.
The is_multipart_boundary() was designed to catch both the internal
boundary and the terminating one (the one with trailing "--"); this also
was broken with the rewrite, and the code in the handle_boundary() to
handle the terminating boundary was never triggered.
[ew:
* removed unrelated line-wrapping changes
* fixed line-wrapping in a few more places
* removed trailing whitespace
* fixed bashism in test
* removed unnecessary httpd startup in test
* changed copyright on tests to 2008 Marcus Griep
* added executable permissions to new tests
]
Signed-off-by: Marcus Griep <marcus@griep.us> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Thu, 7 Aug 2008 23:50:31 +0000 (01:50 +0200)]
filter-branch: be more helpful when an annotated tag changes
Previously, git-filter-branch failed if it attempted to update an
annotated tag. Now we ignore this condition if --tag-name-filter is
given, so that we can later rewrite the tag. If no such option was
provided, we warn the user that he might want to run with
"--tag-name-filter cat" to achieve the intended effect.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Thu, 7 Aug 2008 14:16:03 +0000 (16:16 +0200)]
Documentation: filter-branch: document how to filter all refs
Document the '--' option that can be used to pass rev-list options
(not just arguments), and give an example usage of '-- --all'. Remove
reference to "the new branch name"; filter-branch takes arbitrary
arguments to rev-list since dfd05e3.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 7 Aug 2008 19:06:26 +0000 (14:06 -0500)]
Makefile: add a target which will abort compilation with ancient shells
This adds a make target which can be used to try to execute certain shell
constructs which are required for compiling and running git.
This patch provides a test for the $() notation for command substition
which is used in the Makefile and extensively in the git scripts.
The make target is named in such a way as to be a hint to the user that
SHELL_PATH should be set to an appropriate shell. If the shell command
fails, the user should receive a message similar to the following:
Junio C Hamano [Fri, 8 Aug 2008 20:31:27 +0000 (13:31 -0700)]
GIT-VERSION-GEN: mark the version 'dirty' only if there are modified files
We used to mark the version string with '-dirty' if the cache was not up
to date, but the only thing we want to know is if the binaries are built
from modified source. Refresh the cache to avoid false dirtyness.
Christian Jaeger noticed this issue while building under fakeroot
environment (without -u) that lies about the file ownership data.
"git commit -a" ignores untracked files and follows all tracked
files, regardless of whether they are listed in .gitignore. So
don't use it to motivate gitignore.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Thu, 7 Aug 2008 09:06:16 +0000 (02:06 -0700)]
git-svn: add ability to specify --commit-url for dcommit
This allows one to use public svn:// URLs for fetch and
svn+ssh:// URLs for committing (without using the complicated
rewriteRoot option, reimporting or git-filter-branch).
Using this can also help avoid unnecessary server
authentication/encryption overhead on busy SVN servers.
Along with the new --revision option, this can also be allowed
to override the branch detection in dcommit, too. This is
potentially dangerous and not recommended! (And also purposely
undocumented, but the loaded gun is there in case somebody
wants to make it safe).
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Aug 2008 23:05:25 +0000 (16:05 -0700)]
asciidoc markup fixes
I see quite a few pages on k.org site, e.g.
http://www.kernel.org/pub/software/scm/git/docs/git-rerere.html
(scroll down to find "After this test merge")
are misformatted to lose teletype text '+' that is followed by a comma,
and turns the following paragraph all typeset in teletype.
This patch seems to fix the issue at the site (meaning, with the
particular vintage of asciidoc and docbook toolchain), without breaking
things with the version I have at my primary development machine, but
wider testing is very much appreciated.
Junio C Hamano [Thu, 7 Aug 2008 01:56:23 +0000 (18:56 -0700)]
Merge branch 'lt/config-fsync' into maint
* lt/config-fsync:
Add config option to enable 'fsync()' of object files
Split up default "i18n" and "branch" config parsing into helper routines
Split up default "user" config parsing into helper routine
Split up default "core" config parsing into helper routine
Petr Baudis [Thu, 7 Aug 2008 00:06:30 +0000 (02:06 +0200)]
Fail properly when cloning from invalid HTTP URL
Currently, when cloning from invalid HTTP URL, git clone will possibly
return curl error, then a confusing message about remote HEAD and then
return success and leave an empty repository behind, confusing either
the end-user or the automated service calling it (think repo.or.cz).
This patch changes the error() calls in get_refs_via_curl() to die()s,
akin to the other get_refs_*() functions.
Cc: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 6 Aug 2008 18:43:47 +0000 (11:43 -0700)]
Files given on the command line are relative to $cwd
When running "git commit -F file" and "git tag -F file" from a
subdirectory, we should take it as relative to the directory we started
from, not relative to the top-level directory.
This adds a helper function "parse_options_fix_filename()" to make it more
convenient to fix this class of issues. Ideally, parse_options() should
support a new type of option, "OPT_FILENAME", to do this uniformly, but
this patch is meant to go to 'maint' to fix it minimally.
One thing to note is that value for "commit template file" that comes from
the command line is taken as relative to $cwd just like other parameters,
but when it comes from the configuration varilable 'commit.template', it
is taken as relative to the working tree root as before. I think this
difference actually is sensible (not that I particularly think
commit.template itself is sensible).
Junio C Hamano [Wed, 6 Aug 2008 20:32:18 +0000 (13:32 -0700)]
Merge git://repo.or.cz/git-gui
* git://repo.or.cz/git-gui:
git-gui: Adapt discovery of oguilib to execdir 'libexec/git-core'
git-gui: add a part about format strings in po/README
git-gui: update po/it.po
git-gui: update Japanese translation
git-gui: Update swedish translation.
git-gui: Update git-gui.pot for 0.11 nearing release
git-gui: Update German translation
Junio C Hamano [Wed, 6 Aug 2008 20:32:12 +0000 (13:32 -0700)]
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Update swedish translation.
gitk: Updated German translation
gitk: Fallback to selecting the head commit upon load
gitk: Fixed automatic row selection during load
gitk: Fixed broken exception handling in diff
gitk: On Windows, use a Cygwin-specific flag for kill
gitk: Arrange to kill diff-files & diff-index on quit
gitk: Kill back-end processes on window close
usage pattern by Porcelains properly. For diff-tree to talk sensibly
about commits, it needs to see commits, not just trees; the code was fixed
to take list of commits on the standard input in 1.2.0.
However we left the documentation stale for a long time, until Karl
Hasselström finally noticed it very recently.
Steven Grimm [Tue, 5 Aug 2008 20:08:41 +0000 (13:08 -0700)]
Optimize sha1_object_info for loose objects, not concurrent repacks
When dealing with a repository with lots of loose objects, sha1_object_info
would rescan the packs directory every time an unpacked object was referenced
before finally giving up and looking for the loose object. This caused a lot
of extra unnecessary system calls during git pack-objects; the code was
rereading the entire pack directory once for each loose object file.
This patch looks for a loose object before falling back to rescanning the
pack directory, rather than the other way around.
Signed-off-by: Steven Grimm <koreth@midwinter.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Tue, 5 Aug 2008 18:01:50 +0000 (13:01 -0500)]
Teach fsck and prune that tmp_obj_ file names may not be 14 bytes long
As Shawn pointed out, not all temporary file creation routines can
ensure that the generated temporary file is of a certain length.
e.g. Java's createTempFile(prefix, suffix). So just depend on the
prefix 'tmp_obj_' for detection.
Update prune, and fix the "fix" introduced by a08c53a1 :)
Signed-off-by: Brandon "appendixless" Casey <casey@nrlssc.navy.mil> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lee Marlow [Tue, 5 Aug 2008 05:50:35 +0000 (23:50 -0600)]
bash completion: More completions for 'git stash'
Add branch subcommand to completions and USAGE for git-stash.sh.
Complete stash names for show, apply, drop, pop, and branch.
Add "--index" long option for apply.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lee Marlow [Tue, 5 Aug 2008 05:50:31 +0000 (23:50 -0600)]
bash completion: Add completion for 'git clone'
Add completions for all long options specified in the docs
--local --no-hardlinks --shared --reference
--quiet --no-checkout --bare --mirror --origin
--upload-pack --template= --depth
Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David D. Kilzer [Tue, 5 Aug 2008 07:35:17 +0000 (00:35 -0700)]
Fix race condition in t9119-git-svn-info.sh
Changed the ptouch bash function to use the "Text Last Updated"
date reported by 'svn info' when changing the modified time
(mtime) of the file/symlink/directory in the git working
directory. Previously it used the mtime of the item in the
svn working directory, which caused the race condition.
[ew: swapped argument order of ptouch() to minimize diff]
From: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Tue, 5 Aug 2008 18:27:30 +0000 (11:27 -0700)]
diff.renamelimit is a basic diff configuration
The configuration was added as a core option in 3299c6f (diff: make
default rename detection limit configurable., 2005-11-15), but 9ce392f
(Move diff.renamelimit out of default configuration., 2005-11-21)
separated diff-related stuff out of the core.
Up to that point it was Ok.
When we separated the Porcelain options out of the git_diff_config in 83ad63c (diff: do not use configuration magic at the core-level,
2006-07-08), we should have been more careful.
This mistake made diff-tree plumbing and git-show Porcelain to notice
different set of renames when the user explicitly asked for rename
detection.
Dmitry Potapov [Mon, 4 Aug 2008 15:30:24 +0000 (19:30 +0400)]
correct access right for git-svn-dcommit test
The tests requires anonymous write access. Therefore, "anon-access =
write" is added to conf/svnserve.conf. But because it was added to
the end of the file, it is impossible to guarantee in what section
it will be located. It turned out that on SVN 1.5, it was placed in
the wrong section and as result the test failed.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Tested-by: Brad King <brad.king@kitware.com> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git::DESTROY calls _close_cat_blob and _close_hash_and_insert_object,
which in turn call command_close_bidi_pipe, which calls waitpid, which
alters $?. If this happens during global destruction, it may alter the
program's exit status unexpectedly. Making $? local to the function
solves the problem.
(The problem was discovered due to a failure of test #8 in
t9106-git-svn-commit-diff-clobber.sh.)
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Mon, 4 Aug 2008 20:09:46 +0000 (22:09 +0200)]
git-gui: Adapt discovery of oguilib to execdir 'libexec/git-core'
The new execdir is two levels below the root directory, while
the old execdir 'bin' was only one level below. This commit
adapts the discovery of oguilib that uses relative paths
accordingly. We determine whether we have the extra level in the same
way in which the Makefile defines sharedir, i.e. whether the last
directory part is 'git-core'.
Inspired-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-svn: Abort with an error if 'fetch' parameter is invalid.
Previously, if a config entry looked like this:
svn-remote.svn.fetch=:refs/heads/whatever
git-svn would silently do nothing if you asked it to "git svn fetch", and
give a strange error if asked to "git svn dcommit". What it really wants is
a line that looks like this:
svn-remote.svn.fetch=:refs/remotes/whatever
So we should simply abort if we get the wrong thing.
On the other hand, there's actually no good reason for git-svn to enforce
using the refs/remotes namespace, but the code seems to have hardcoded this
in several places and I'm not brave enough to try to fix it all right now.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone --bare: Add ".git" suffix to the directory name to clone into
We have a tradition that bare repositories live in directories ending
in ".git". To make this more a convention than just a tradition, teach
"git clone --bare" to add a ".git" suffix to the directory name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 3 Aug 2008 13:44:33 +0000 (15:44 +0200)]
git-name-rev: don't use printf without format
printf() without an explicit format string is not a good coding practise,
unless the printed string is guaranteed to not contain percent signs. While
fixing this, we might as well combine the calls to fwrite() and printf().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch enhances the tex funcname by adding support for
chapter and part sectioning commands. It also matches
the starred version of the sectioning commands.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finds classes, records, functions, procedures, and sections. Most lines
need to start at the first column, or else there's no way to differentiate
a procedure's definition from its declaration.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 2 Aug 2008 18:04:22 +0000 (11:04 -0700)]
builtin-name-rev.c: split deeply nested part from the main function
The main function of this command implementation tries to do too many
things. Split out a handling of single input line into a separate
function to reduce nesting level and clutter.
git-add -i ranges expect number-number. But for the supremely lazy, typing in
that second number when selecting "from patch 7 to the end" is wasted effort.
So treat an empty second number in a range as "until the last item".
Signed-off-by: Ciaran McCreesh <ciaran.mccreesh@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit [Mon, 21 Jul 2008 18:15:59 +0000 (20:15 +0200)]
git-submodule: move ill placed shift.
When running git submodule update -i, the "-i" is shifted before recursing
into cmd_init and then again outside of the loop. This causes some /bin/sh
to complain about shifting when there are no arguments left (and would
discard anything written after -i too).
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sort_in_topological_order(): avoid setting a commit flag
We used to set the TOPOSORT flag of commits during the topological
sorting, but we can just as well use the member "indegree" for it:
indegree is now incremented by 1 in the cases where the commit used
to have the TOPOSORT flag.
This is the same behavior as before, since indegree could not be
non-zero when TOPOSORT was unset.
Incidentally, this fixes the bug in show-branch where the 8th column
was not shown: show-branch sorts the commits in topological order,
assuming that all the commit flags are available for show-branch's
private matters.
But this was not true: TOPOSORT was identical to the flag corresponding
to the 8th ref. So the flags for the 8th column were unset by the
topological sorting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Steve Haslam [Fri, 25 Jul 2008 17:51:51 +0000 (18:51 +0100)]
Propagate -u/--upload-pack option of "git clone" to transport.
The -u option to override the remote system's path to git-upload-pack was
being ignored by "git clone"; caused by a missing call to
transport_set_option to set TRANS_OPT_UPLOADPACK. Presumably this crept in
when git-clone was converted from shell to C.
Signed-off-by: Steve Haslam <shaslam@lastminute.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 27 Jul 2008 06:15:51 +0000 (23:15 -0700)]
make sure parsed wildcard refspec ends with slash
A wildcard refspec is internally parsed into a refspec structure with src
and dst strings. Many parts of the code assumed that these do not include
the trailing "/*" when matching the wildcard pattern with an actual ref we
see at the remote. What this meant was that we needed to make sure not
just that the prefix matched, and also that a slash followed the part that
matched.
But a codepath that scans the result from ls-remote and finds matching
refs forgot to check the "matching part must be followed by a slash" rule.
This resulted in "refs/heads/b1" from the remote side to mistakenly match
the source side of "refs/heads/b/*:refs/remotes/b/*" refspec.
Worse, the refspec crafted internally by "git-clone", and a hardcoded
preparsed refspec that is used to implement "git-fetch --tags", violated
this "parsed widcard refspec does not end with slash" rule; simply adding
the "matching part must be followed by a slash" rule then would have
broken codepaths that use these refspecs.
This commit changes the rule to require a trailing slash to parsed
wildcard refspecs. IOW, "refs/heads/b/*:refs/remotes/b/*" is parsed as
src = "refs/heads/b/" and dst = "refs/remotes/b/". This allows us to
simplify the matching logic because we only need to do a prefixcmp() to
notice "refs/heads/b/one" matches and "refs/heads/b1" does not.
Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 28 Jul 2008 06:02:04 +0000 (02:02 -0400)]
init: handle empty "template" parameter
If a user passes "--template=", then our template parameter
is blank. Unfortunately, copy_templates() assumes it has at
least one character, and does all sorts of bad things like
reading from template[-1] and then proceeding to link all of
'/' into the .git directory.
This patch just checks for that condition in copy_templates
and aborts. As a side effect, this means that --template=
now has the meaning "don't copy any templates."
Pierre Habouzit [Thu, 31 Jul 2008 10:22:23 +0000 (12:22 +0200)]
Allow "non-option" revision options in parse_option-enabled commands
Commands which use parse_options() but also call setup_revisions()
must do their parsing in a two step process:
1. first, they parse all options. Anything unknown goes to
parse_revision_opt() (which calls handle_revision_opt), which
may claim the option or say "I don't recognize this"
2. the non-option remainder goes to setup_revisions() to
actually get turned into revisions
Some revision options are "non-options" in that they must be
parsed in order with their revision counterparts in
setup_revisions(). For example, "--all" functions as a
pseudo-option expanding to all refs, and "--no-walk" affects refs
after it on the command line, but not before. The revision option
parser in step 1 recognizes such options and sets them aside for
later parsing by setup_revisions().
However, the return value used from handle_revision_opt indicated
"I didn't recognize this", which was wrong. It did, and it took
appropriate action (even though that action was just deferring it
for later parsing). Thus it should return "yes, I recognized
this."
Previously, these pseudo-options generated an error when used with
parse_options parsers (currently just blame and shortlog). With
this patch, they should work fine, enabling things like "git
shortlog --all".
Signed-off-by: Jeff King <peff@peff.net> Acked-By: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 31 Jul 2008 07:36:09 +0000 (03:36 -0400)]
Compact commit template message
We recently let the user know explicitly that an empty
commit message will abort the commit. However, this adds yet
another line to the template; let's rephrase and re-wrap so
that this fits back on two lines.
This patch also makes the "fatal: empty commit message?"
warning a bit less scary, since this is now a "feature"
instead of an error. However, we retain the non-zero exit
status to indicate to callers that nothing was committed.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>