Laurent Pinchart [Wed, 16 Jan 2019 23:59:34 +0000 (01:59 +0200)]
drm: rcar-du: Turn LVDS clock output on/off for DPAD0 output on D3/E3
On the D3 and E3 SoCs the LVDS PLL clock output provides the dot clock
to the DU channels, even when the LVDS outputs are not in use. Enable
and disable the LVDS clock output when enabling or disabling a CRTC
connected to the DPAD0 output.
Laurent Pinchart [Wed, 16 Jan 2019 23:11:37 +0000 (01:11 +0200)]
drm: rcar-du: lvds: Add API to enable/disable clock output
On the D3 and E3 platforms, the LVDS internal PLL supplies the pixel
clock to the DU. This works automatically for LVDS outputs as the LVDS
encoder is enabled through the bridge API, enabling the internal PLL and
clock output. However, when using the DU DPAD output with the LVDS
outputs turned off, the LVDS PLL needs to be controlled manually. Add an
API to do so, to be called by the DU driver.
The drivers/gpu/drm/rcar-du/ directory has to be treated as obj-y
unconditionally, as the LVDS driver could be built-in while the DU
driver is compiled as a module.
Laurent Pinchart [Wed, 16 Jan 2019 22:43:08 +0000 (00:43 +0200)]
drm: rcar-du: lvds: Don't fail probe if output is not connected on D3/E3
On the D3 and E3 SoCs the LVDS encoder has an extended internal PLL and
supplies a clock to the DU. That clock is used not only for the LVDS
outputs but also for the DPAD output. The LVDS encoder thus needs to be
available to the DU even when its output is disabled. Don't fail probe
in that case on D3 and E3.
Laurent Pinchart [Wed, 16 Jan 2019 22:40:49 +0000 (00:40 +0200)]
drm: rcar-du: Simplify encoder registration
Before the driver fully moved to drm_bridge and drm_panel, it was
necessary to parse DT and locate encoder and connector nodes. The
connector node is now unused and can be removed as a parameter to
rcar_du_encoder_init(). As a consequence rcar_du_encoders_init_one() can
be greatly simplified, removing most of the DT parsing.
Julia Lawall [Mon, 14 Jan 2019 16:44:56 +0000 (17:44 +0100)]
drm: rcar-du: add missing of_node_put
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
Add a second of_node_put if no encoder is selected (encoder remains NULL).
The semantic match that finds the first problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Dave Airlie [Mon, 4 Feb 2019 05:37:52 +0000 (15:37 +1000)]
Merge tag 'drm-intel-next-2019-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Make background color and LUT more robust (Matt)
- Icelake display fixes (Ville, Imre)
- Workarounds fixes and reorg (Tvrtko, Talha)
- Enable fastboot by default on VLV and CHV (Hans)
- Add another PCI ID for Coffee Lake (Rodrigo)
Dave Airlie [Mon, 4 Feb 2019 04:42:25 +0000 (14:42 +1000)]
Merge tag 'drm-misc-next-2019-02-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Split out some part of drm_crtc_helper.h into drm_probe_helper.h
- DRIVER_* flags improvements
- New tasks on the TODO-list
- Improvements to the documentation
Driver Changes:
- Continual of drmP.h removal in multiple drivers
- Removal of FBINFO_(FLAG_)DEFAULT in multiple drivers
- sun4i: Addition of the A23 support, multiple fixes for the tiled
formats
- atmel-hlcdc: Fix of clipping and rotation properties
- qxl: various BO-related improvements, prime and generic fbdev emulation
support
- dw-hdmi: Support for HDMI2.0 2160p modes and YUV420 output
- New Sitronix ST7701 panel driver
- New Kingdisplay KD097D04 panel driver
- New LeMaker BL035-RGB-002 panel driver
- New PDA 91-00156-A0 panel driver
Neil Armstrong [Fri, 1 Feb 2019 12:07:49 +0000 (12:07 +0000)]
drm/bridge: dw-hdmi: add support for YUV420 output
In order to support the HDMI2.0 YUV420 display modes, this patch
adds support for the YUV420 TMDS Clock divided by 2 and the controller
passthrough mode.
YUV420 Synopsys PHY support will need some specific configuration table
to support theses modes.
This patch is based on work from Zheng Yang <zhengyang@rock-chips.com> in
the Rockchip Linux 4.4 BSP at [1]
Neil Armstrong [Fri, 1 Feb 2019 12:07:48 +0000 (12:07 +0000)]
drm/meson: add support for HDMI2.0 2160p modes
Now we support the TMDS Clock > 3.4GHz and support the SCDC Control
operation in the DW-HDMI Controller, we can enable support for the
HDMI2.0 3840x2160@60/50 RGB444 display modes.
Neil Armstrong [Fri, 1 Feb 2019 12:07:46 +0000 (12:07 +0000)]
drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support
Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
Scrambling when supported or mandatory.
This patch also adds an helper to setup the control bit to support
the high TMDS Bit Period/TMDS Clock-Period Ratio as required with
TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes.
These changes were based on work done by Huicong Xu <xhc@rock-chips.com>
and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes
on the Rockchip 4.4 BSP kernel at [1]
Dave Airlie [Thu, 31 Jan 2019 23:51:23 +0000 (09:51 +1000)]
Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next
This pull includes the new Arm "komeda" DRM driver. It is currently hosted
in the same repo as the other "mali-dp" driver because it is the next
iteration of the IP.
Dave Airlie [Thu, 31 Jan 2019 23:34:49 +0000 (09:34 +1000)]
Merge tag 'drm-intel-next-2019-01-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Track all runtime-PM wakerefs and other rpm improvements (Chris)
- Fix ILK-IVB primary plane enable delays (Juha-Pekka)
- Differentiate between gtt->mutex and ppgtt->mutex (Chris)
- Prevent concurrent GGTT update and use on Braswell (Chris)
- Fix CNL macros for DDI vswing (Aditya)
- Fix static code analysis warning (RK)
- Only dump GPU state on set-wedged if interesting (Chris)
- Port F detection improvements (Imre)
- userptr mutex lock fixes (Chris)
- Fix on MST allocation by propagating error value at compute_config (Lyude)
- Serialise concurrent calls to set_wedge (Chris)
- Unify reset functionality into i915_reset.c (Chris)
- Switch to kernel fixed size types (Jani)
- Limit the for_each_set_bit to the valid range (Chris)
- Fix wakeref cooie handling (Tvrtko)
- IRQs handling improvements (Chris)
- Selftests improvements (Chris)
- Remove superfluous PANEL_POWER_OFF macro (Jani)
- Global seqno fix (Chris)
- DSI fixes (Hans)
- Refactor out intel_context_init() (Chris)
- Show all active engines on hangcheck (Chris)
- PSR2 fixes and improvements (Jose)
- Do a posting read after irq install on Ice Lake (Daniele)
- Add few more device IDs for Ice Lake (Rodrigo)
- Mark up priority boost on preemption (Chris)
- Add color management LUT validation helper (Matt)
- Split out intel_crt_present to platform specific setup (Jani)
- LVDS and TV clean up and improvements (Jani)
- Simplify CRT VBT check for per-VLV/DDI (Jani)
- De-inline intel_context_init() (Chris)
- Backlight fixes (Maarten)
- Enable fastset for non-boot modesets (Maarten)
- Make HW readout mark CRTC scaler as in use (Maarten)
Dave Airlie [Thu, 31 Jan 2019 04:19:45 +0000 (14:19 +1000)]
Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-next
New stuff for 5.1.
amdgpu:
- DC bandwidth formula updates
- Support for DCC on scanout surfaces
- Support for multiple IH rings on soc15 asics
- Fix xgmi locking
- Add sysfs interface to get pcie usage stats
- Simplify DC i2c/aux code
- Initial support for BACO on vega10/20
- New runtime SMU feature debug interface
- Expand existing sysfs power interfaces to new clock domains
- Handle kexec properly
- Simplify IH programming
- Rework doorbell handling across asics
- Drop old CI DPM implementation
- DC page flipping fixes
- Misc SR-IOV fixes
amdkfd:
- Simplify the interfaces between amdkfd and amdgpu
ttm:
- Add a callback to notify the driver when the lru changes
Drivers shouldn't be using these values, add a TODO so someone removes
them.
Changes in v2:
- Add drm_display_mode.vrefresh removal (Ville)
- Add Sam's R-b and bonus points
Changes in v3:
- Add hsync removal todo item (Daniel)
- Change vrefresh wording to make removal less optional
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Bonus-points-awarded-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190129192637.73296-1-sean@poorly.run
Hans de Goede [Tue, 29 Jan 2019 14:22:37 +0000 (15:22 +0100)]
drm/i915: Enable fastboot by default on VLV and CHV
We really want to have fastboot enabled by default to avoid an ugly
modeset during boot.
Currently we are enabling fastboot by default on gen9+ (Skylake and newer).
The intention is to enable it on older generations after it has seen more
testing on gen9+.
VLV and CHV devices are still being sold in stores today, as such it is
desirable to also enable fastboot by default on these now.
I've extensively tested fastboot=1 support on over 50 different
Bay- and Cherry-Trail devices. Testing DSI and eDP panels as well as
HDMI output (and even DP over Type-C on one device).
All 50 devices work fine with fastboot=1. On 2 devices their DSI panel
turns black as soon as the i915 driver loads when fastboot=0, so having
fastboot enabled is required for these 2 to work properly (for lack of
a better fix).
This restores the workaround that was reverted in c358514ba8da
("Revert "drm/i915/icl: WaEnableFloatBlendOptimization"").
The revert was due to the register write seemingly not sticking,
but the HW team has confirmed that this is because the
register is WO and that the workaround is indeed required.
Here the wa is added with a mask of 0 since the register is WO.
References: https://hsdes.intel.com/resource/1408134172
References: https://bugs.freedesktop.org/show_bug.cgi?id=107338 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Talha Nassar <talha.nassar@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1548983324-15344-4-git-send-email-talha.nassar@intel.com
Tvrtko Ursulin [Fri, 1 Feb 2019 01:08:42 +0000 (17:08 -0800)]
drm/i915: Move workaround infrastructure code up
Top comment in intel_workarounds.c says common code should come first so
lets respect that. Also, by moving the common code together opportunities
to reduce duplication will become more obvious.
Imre Deak [Mon, 28 Jan 2019 11:42:42 +0000 (13:42 +0200)]
drm/i915/icl: Add TypeC ports only if VBT is present
We can't safely probe Type C ports, whether they are a legacy or a
USB/Thunderbolt DP Alternate Type C port. This would require performing
the TypeC connect sequence - as described by the specification - but
that may have unwanted side-effects. These side-effects include at least
- without completeness - timeouts during AUX power well enabling and
subsequent PLL enabling errors.
To safely identify these ports we really need VBT, which has the proper
flag for this (ddi_vbt_port_info::supports_typec_usb, supports_tbt).
Based on the above disable Type C ports if we can't load VBT for some
reason.
v2:
- Notice that we disable TypeC ports completely and simplify accordingly
(Jose).
- Add code comment explaining why we disabled the ports. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190128114242.28666-1-imre.deak@intel.com
Ville Syrjälä [Wed, 30 Jan 2019 18:13:59 +0000 (20:13 +0200)]
drm/i915: Pick the first unused PLL once again
commit 5b0bd14dcc6b ("drm/i915/icl: keep track of unused pll while
looping") inadvertently (I presume) changed the code to pick the
last unused dpll rather than the first unused one like we did before.
While there should most likely be no harm in changing the order
let's change back just to avoid a change in the behaviour. At
least it might reduce the confusion when staring at logs (took
me a while to figure out why DPLL1 being picked over DPLL0
when the latter was most definitely available).
Matt Roper [Wed, 30 Jan 2019 18:10:22 +0000 (10:10 -0800)]
drm/i915: Apply LUT validation checks to platforms more accurately (v3)
Use of the new DRM_COLOR_LUT_NON_DECREASING test was a bit over-zealous;
it doesn't actually need to be applied to the degamma on "bdw-style"
platforms. Likewise, we overlooked the fact that CHV should have that
test applied to the gamma LUT as well as the degamma LUT.
Rather than adding more complicated platform checking to
intel_color_check(), let's just store the appropriate set of LUT
validation flags for each platform in the intel_device_info structure.
v2:
- Shuffle around LUT size tests so that the hardware-specific tests
won't be applied to legacy gamma tables. (Ville)
- Add a debug message so that it will be easier to understand why an
atomic transaction involving incorrectly-sized LUT's got rejected
by the driver.
v3:
- Switch size_t's to int's. (Ville)
Fixes: 85e2d61e4976 ("drm/i915: Validate userspace-provided color management LUT's (v4)")
References: https://lists.freedesktop.org/archives/intel-gfx/2019-January/187634.html Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190130181022.4291-1-matthew.d.roper@intel.com
Matt Roper [Wed, 30 Jan 2019 18:51:20 +0000 (10:51 -0800)]
drm/i915: Force background color to black for gen9+ (v2)
We don't yet allow userspace to control the CRTC background color, but
we should manually program the color to black to ensure the BIOS didn't
leave us with some other color. We should also set the pipe gamma and
pipe CSC bits so that the background color goes through the same color
management transformations that a plane with black pixels would.
v2: Rename register to SKL_BOTTOM_COLOR to more closely follow
bspec naming. (Ville)
Daniel Vetter [Wed, 30 Jan 2019 16:30:05 +0000 (17:30 +0100)]
drm/doc: Drop chapter "KMS Initialization and Cleanup"
It only talks about crtc, brings up intel as an example and I think is
more misleading than useful really. Plus we have lots of discussion
about how your standard kms driver should be initialized/cleaned up,
so maybe better to document this when we have a better idea.
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/savage/savage_state.c:301:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:438:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:559:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:697:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/via/via_dmablit.c:179:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:185:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:187:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:195:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Ville Syrjälä [Fri, 21 Dec 2018 17:14:34 +0000 (19:14 +0200)]
drm/i915: Drop the definite article in front of SAGV
The spec doesn't use a definite article in front of SAGV. The
rules regarding articles and initialisms are super fuzzy, but
at least to my ears it sounds much more natural to not have
the article. Perhaps because I tend to pronounce it as
"sag-vee" instead of spelling out the letters one at a time.
Actually I might still prefer to leave out the article if I
did spell them out.
Ville Syrjälä [Fri, 21 Dec 2018 17:14:33 +0000 (19:14 +0200)]
drm/i915: Pass dev_priv to skl_needs_memory_bw_wa()
skl_needs_memory_bw_wa() doesn't look at the passed in state at all.
Possibly it should, but for now let's make life simpler by just
passing in dev_priv.
Ville Syrjälä [Fri, 21 Dec 2018 17:14:32 +0000 (19:14 +0200)]
drm/i915: Account for minimum ddb allocation restrictions
On icl+ bspec tells us to calculate a separate minimum ddb
allocation from the blocks watermark. Both have to be checked
against the actual ddb allocation, but since we do things the
other way around we'll just calculat the minimum acceptable
ddb allocation by taking the maximum of the two values.
We'll also replace the memcmp() with a full trawl over the
the watermarks so that it'll ignore the min_ddb_alloc
because we can't directly read that out from the hw. I suppose
we could reconstruct it from the other values, but I was
too lazy to do that now.
Ville Syrjälä [Fri, 21 Dec 2018 17:14:31 +0000 (19:14 +0200)]
drm/i915: Fix > vs >= mismatch in watermark/ddb calculations
Bspec says we have to reject the watermark if it's >= the ddb
allocation. Fix the code to reject the == case as it should.
For transition watermarks we can just use >=, for the rest
we'll do +1 when calculating the minimum ddb allocation size.
Ville Syrjälä [Fri, 21 Dec 2018 17:14:30 +0000 (19:14 +0200)]
drm/i915: Fix bits vs. bytes mixup in dbuf block size computation
The spec used to say "8bpp" which someone took to mean 8 bytes per
pixel when in fact it was supposed to be 8 bits per pixel. The
spec has been updated to make it more clear now. Fix the code
to match.
Ville Syrjälä [Fri, 21 Dec 2018 17:14:29 +0000 (19:14 +0200)]
drm/i915: Reinstate an early latency==0 check for skl+
I thought we could remove all the early latency==0 checks
and rely on skl_wm_method{1,2}() checking for it. But
skl_compute_plane_wm() applies a bunch of workarounds to bump
up the latency before calling those guys so clearly it won't
end up doing the right thing. Also not sure if the calculations
based on the method1/2 results are safe agaisnt overflows so
it might not work all that well in any case. Let's put the
early check back.
Ville Syrjälä [Fri, 21 Dec 2018 17:14:28 +0000 (19:14 +0200)]
drm/i915: Don't ignore level 0 lines watermark for glk+
On glk+ the level 0 lines watermark actually matters. Do not ignore it.
And while at it let's change things so that we always program a
consistnet 0 to the register when the lines watermarks is ignored
by the hardware.
Lucas De Marchi [Fri, 25 Jan 2019 22:24:43 +0000 (14:24 -0800)]
drm/i915/icl: remove dpll from clk_sel
We should not pass DPLL_ID_ICL_DPLL0 or DPLL_ID_ICL_DPLL1 to this
function because the path is only taken for non-combophy ports. Let the
warning trigger if improper value is given.
While at it, rename the function to match the register name we are
trying to program.
Lucas De Marchi [Fri, 25 Jan 2019 22:24:41 +0000 (14:24 -0800)]
drm/i915/icl: use tc_port in MG_PLL macros
Fix the TODO leftover in the code by changing the argument in MG_PLL
macros. The MG_PLL ids used to access the register values can be
converted from tc_port rather than port.
All these registers can use the TC port to calculate the right offsets
because they are only available for TC ports. The range (PORT_C onwards)
may not be stable and change from platform to platform. So by using the
TC id directly we avoid having to check for the platform in the "leaf
functions" and thus passing dev_priv around.
The helper functions were also renamed to use "tc" as prefix to make
them more generic.
v2: Improve commit message and fix checkpatch warning (from Paulo)
Chris Wilson [Tue, 29 Jan 2019 20:52:30 +0000 (20:52 +0000)]
drm/i915: Drop fake breadcrumb irq
Missed breadcrumb detection is defunct due to the tight coupling with
dma_fence signaling and the myriad ways we may signal fences from
everywhere but from an interrupt, i.e. we frequently signal a fence
before we even see its interrupt. This means that even if we miss an
interrupt for a fence, it still is signaled before our breadcrumb
hangcheck fires, so simplify the breadcrumb hangchecking by moving it
into the GPU hangcheck and forgo fake interrupts.
Chris Wilson [Tue, 29 Jan 2019 20:52:29 +0000 (20:52 +0000)]
drm/i915: Replace global breadcrumbs with per-context interrupt tracking
A few years ago, see commit 688e6c725816 ("drm/i915: Slaughter the
thundering i915_wait_request herd"), the issue of handling multiple
clients waiting in parallel was brought to our attention. The
requirement was that every client should be woken immediately upon its
request being signaled, without incurring any cpu overhead.
To handle certain fragility of our hw meant that we could not do a
simple check inside the irq handler (some generations required almost
unbounded delays before we could be sure of seqno coherency) and so
request completion checking required delegation.
Before commit 688e6c725816, the solution was simple. Every client
waiting on a request would be woken on every interrupt and each would do
a heavyweight check to see if their request was complete. Commit 688e6c725816 introduced an rbtree so that only the earliest waiter on
the global timeline would woken, and would wake the next and so on.
(Along with various complications to handle requests being reordered
along the global timeline, and also a requirement for kthread to provide
a delegate for fence signaling that had no process context.)
The global rbtree depends on knowing the execution timeline (and global
seqno). Without knowing that order, we must instead check all contexts
queued to the HW to see which may have advanced. We trim that list by
only checking queued contexts that are being waited on, but still we
keep a list of all active contexts and their active signalers that we
inspect from inside the irq handler. By moving the waiters onto the fence
signal list, we can combine the client wakeup with the dma_fence
signaling (a dramatic reduction in complexity, but does require the HW
being coherent, the seqno must be visible from the cpu before the
interrupt is raised - we keep a timer backup just in case).
Having previously fixed all the issues with irq-seqno serialisation (by
inserting delays onto the GPU after each request instead of random delays
on the CPU after each interrupt), we can rely on the seqno state to
perfom direct wakeups from the interrupt handler. This allows us to
preserve our single context switch behaviour of the current routine,
with the only downside that we lose the RT priority sorting of wakeups.
In general, direct wakeup latency of multiple clients is about the same
(about 10% better in most cases) with a reduction in total CPU time spent
in the waiter (about 20-50% depending on gen). Average herd behaviour is
improved, but at the cost of not delegating wakeups on task_prio.
v2: Capture fence signaling state for error state and add comments to
warm even the most cold of hearts.
v3: Check if the request is still active before busywaiting
v4: Reduce the amount of pointer misdirection with list_for_each_safe
and using a local i915_request variable inside the loops
v5: Add a missing pluralisation to a purely informative selftest message.
Chris Wilson [Tue, 29 Jan 2019 20:52:28 +0000 (20:52 +0000)]
drm/i915: Remove the intel_engine_notify tracepoint
The global seqno is defunct and so we have no meaningful indicator of
forward progress for an engine. You need to listen to the request
signaling tracepoints instead.
Ville Syrjälä [Tue, 29 Jan 2019 14:19:13 +0000 (16:19 +0200)]
drm/i915/tv: Bypass the vertical filter if possible
Let's switch the pipe into interlaced mode and switch off
the TV encoder vertical filter if the pipe vdisplay
matches the TV YSIZE exactly.
While I didn't measure it I presume this might reduce
the power consumption a little bit, and the pixel rate
is halved as the pipe will now fetching in interlaced
mode rather than in progressive mode (effectively the
same difference as between IF-ID vs. PF-ID pfit modes
on more modern hardware) so a bit easier on the memory
bandwidth.
Ville Syrjälä [Tue, 29 Jan 2019 14:19:12 +0000 (16:19 +0200)]
drm/i915/tv: Fix adjusted_mode dotclock for interlaced modes
intel_tv_mode_to_mode() assumes the pipe will be in progressive
fetch mode, and thus when programming the pipe into interlaced
mode we have to halve the calculated dotclock to get the correct
field duration.
This becomes more important when we start to program the pipe
into interlaced mode on i965gm as we depend on the timestamps
to get accurate frame counter values. Withot halving the clock
our guesstimated frame counter would tick at twice the expected
speed.
sriov need to restrict max_pfn below AMDGPU_GMC_HOLE.
access the hole results in a range fault interrupt IIRC.
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wentalou [Mon, 14 Jan 2019 08:26:13 +0000 (16:26 +0800)]
drm/amdgpu: csa_vaddr should not larger than AMDGPU_GMC_HOLE_START
After removing unnecessary VM size calculations,
vm_manager.max_pfn would reach 0x10,0000,0000
max_pfn << AMDGPU_GPU_PAGE_SHIFT exceeding AMDGPU_GMC_HOLE_START
would cause GPU reset.
Signed-off-by: wentalou <Wentao.Lou@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Wilson [Tue, 29 Jan 2019 18:54:52 +0000 (18:54 +0000)]
drm/i915/execlists: Suppress preempting self
In order to avoid preempting ourselves, we currently refuse to schedule
the tasklet if we reschedule an inflight context. However, this glosses
over a few issues such as what happens after a CS completion event and
we then preempt the newly executing context with itself, or if something
else causes a tasklet_schedule triggering the same evaluation to
preempt the active context with itself.
However, when we avoid preempting ELSP[0], we still retain the preemption
value as it may match a second preemption request within the same time period
that we need to resolve after the next CS event. However, since we only
store the maximum preemption priority seen, it may not match the
subsequent event and so we should double check whether or not we
actually do need to trigger a preempt-to-idle by comparing the top
priorities from each queue. Later, this gives us a hook for finer
control over deciding whether the preempt-to-idle is justified.
The sequence of events where we end up preempting for no avail is:
1. Queue requests/contexts A, B
2. Priority boost A; no preemption as it is executing, but keep hint
3. After CS switch, B is less than hint, force preempt-to-idle
4. Resubmit B after idling
v2: We can simplify a bunch of tests based on the knowledge that PI will
ensure that earlier requests along the same context will have the highest
priority.
v3: Demonstrate the stale preemption hint with a selftest
Chris Wilson [Tue, 29 Jan 2019 18:54:51 +0000 (18:54 +0000)]
drm/i915: Rename execlists->queue_priority to queue_priority_hint
After noticing that we trigger preemption events for currently executing
requests, as well as requests that complete before the preemption and
attempting to suppress those preemption events, it is wise to not
consider the queue_priority to be authoritative. As we only track the
maximum priority seen between dequeue passes, if the maximum priority
request is no longer available for dequeuing (it completed or is even
executing on another engine), we have no knowledge of the previous
queue_priority as it would require us to keep a full history of enqueued
requests -- but we already have that history in the priolists!
Rename the queue_priority to queue_priority_hint so that we do not
confuse it as being exactly the maximum priority in the queue, but merely
an indication that we have seen a new maximum priority value and as such
we should check whether it should preempt the currently running request.
v2: s/preempt_priority_hint/queue_priority_hint/ as preempt implies it
being only used for the singular task of preemption and not the wider
question of waking up due to a change in the queue.
Chris Wilson [Tue, 29 Jan 2019 18:54:50 +0000 (18:54 +0000)]
drm/i915: Identify active requests
To allow requests to forgo a common execution timeline, one question we
need to be able to answer is "is this request running?". To track
whether a request has started on HW, we can emit a breadcrumb at the
beginning of the request and check its timeline's HWSP to see if the
breadcrumb has advanced past the start of this request. (This is in
contrast to the global timeline where we need only ask if we are on the
global timeline and if the timeline has advanced past the end of the
previous request.)
There is still confusion from a preempted request, which has already
started but relinquished the HW to a high priority request. For the
common case, this discrepancy should be negligible. However, for
identification of hung requests, knowing which one was running at the
time of the hang will be much more important.
Chris Wilson [Tue, 29 Jan 2019 18:54:49 +0000 (18:54 +0000)]
drm/i915/selftests: Apply a subtest filter
In bringup on simulated HW even rudimentary tests are slow, and so many
may fail that we want to be able to filter out the noise to focus on the
specific problem. Even just the tests groups provided for igt is not
specific enough, and we would like to isolate one particular subtest
(and probably subsubtests!). For simplicity, allow the user to provide a
command line parameter such as
to restrict ourselves to only running on subtest. The exact name to use
is given during a normal run, highlighted as an error if it failed,
debug otherwise. The test group is optional, and then all subtests are
compared for an exact match with the filter (most subtests have unique
names). The filter can be negated, e.g. i915.st_filter=!igt_sync and
then all tests but those that match will be run. More than one match can
be supplied separated by a comma, e.g.
i915.st_filter=igt_vma_create,igt_vma_pin1
to only run those specified, or
i915.st_filter=!igt_vma_create,!igt_vma_pin1
to run all but those named. Mixing a blacklist and whitelist will only
execute those subtests matching the whitelist so long as they are
previously excluded in the blacklist.
Daniel Vetter [Tue, 29 Jan 2019 10:42:48 +0000 (11:42 +0100)]
drm/irq: Ditch DRIVER_IRQ_SHARED
This is only used by drm_irq_install(), which is an optional helper.
For legacy pci devices this is required (due to interrupt sharing without
msi/msi-x), and just making this the default exactly matches the behaviour
of all existing drivers using the drm_irq_install() helpers. In case that
ever becomes wrong drivers can roll their own irq handling, as many
drivers already do (for other reasons like needing a threaded interrupt
handler, or having an entire pile of different interrupt sources).
Daniel Vetter [Tue, 29 Jan 2019 10:42:47 +0000 (11:42 +0100)]
drm: Switch DRIVER_ flags to an enum
And move the documenation we alreay have into kerneldoc, plus a bit of
polish while at it.
v2:
- Ditch FIXME from commit message, I've resolved that already before
sending out the first version.
- Put the legacy DRIVER_ flags at the end (Sam).
Daniel Vetter [Tue, 29 Jan 2019 10:42:46 +0000 (11:42 +0100)]
drm/irq: Don't check for DRIVER_HAVE_IRQ in drm_irq_(un)install
If a non-legacy driver calls these it's valid to assume there is
interrupt support. The flag is really only needed for legacy drivers,
which control IRQ enabling/disabling through the DRM_IOCTL_CONTROL
legacy IOCTL.
Also remove all the flag usage from non-legacy drivers.
v2: Review from Emil:
- improve commit message
- I forgot hibmc, fix that
Daniel Vetter [Thu, 24 Jan 2019 16:58:31 +0000 (17:58 +0100)]
drm/<drivers>: Don't set FBINFO_(FLAG_)DEFAULT
Both macros evaluate to 0. At the same time flag is already set to
zero since the struct is kzalloc'd in framebuffer_alloc().
As called by drm_fb_helper_alloc_fbi() in the DRM drivers.
v2: Rebase and improve commit message per Emil's suggestion.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190124165831.16427-27-daniel.vetter@ffwll.ch
Chris Wilson [Mon, 28 Jan 2019 18:18:12 +0000 (18:18 +0000)]
drm/i915: Track active timelines
Now that we pin timelines around use, we have a clearly defined lifetime
and convenient points at which we can track only the active timelines.
This allows us to reduce the list iteration to only consider those
active timelines and not all.
Chris Wilson [Mon, 28 Jan 2019 18:18:11 +0000 (18:18 +0000)]
drm/i915: Track the context's seqno in its own timeline HWSP
Now that we have allocated ourselves a cacheline to store a breadcrumb,
we can emit a write from the GPU into the timeline's HWSP of the
per-context seqno as we complete each request. This drops the mirroring
of the per-engine HWSP and allows each context to operate independently.
We do not need to unwind the per-context timeline, and so requests are
always consistent with the timeline breadcrumb, greatly simplifying the
completion checks as we no longer need to be concerned about the
global_seqno changing mid check.
One complication though is that we have to be wary that the request may
outlive the HWSP and so avoid touching the potentially danging pointer
after we have retired the fence. We also have to guard our access of the
HWSP with RCU, the release of the obj->mm.pages should already be RCU-safe.
At this point, we are emitting both per-context and global seqno and
still using the single per-engine execution timeline for resolving
interrupts.
Chris Wilson [Mon, 28 Jan 2019 18:18:10 +0000 (18:18 +0000)]
drm/i915: Share per-timeline HWSP using a slab suballocator
If we restrict ourselves to only using a cacheline for each timeline's
HWSP (we could go smaller, but want to avoid needless polluting
cachelines on different engines between different contexts), then we can
suballocate a single 4k page into 64 different timeline HWSP. By
treating each fresh allocation as a slab of 64 entries, we can keep it
around for the next 64 allocation attempts until we need to refresh the
slab cache.
John Harrison noted the issue of fragmentation leading to the same worst
case performance of one page per timeline as before, which can be
mitigated by adopting a freelist.
v2: Keep all partially allocated HWSP on a freelist
This is still without migration, so it is possible for the system to end
up with each timeline in its own page, but we ensure that no new
allocation would needless allocate a fresh page!
v3: Throw a selftest at the allocator to try and catch invalid cacheline
reuse.
Chris Wilson [Mon, 28 Jan 2019 18:18:09 +0000 (18:18 +0000)]
drm/i915: Allocate a status page for each timeline
Allocate a page for use as a status page by a group of timelines, as we
only need a dword of storage for each (rounded up to the cacheline for
safety) we can pack multiple timelines into the same page. Each timeline
will then be able to track its own HW seqno.
v2: Reuse the common per-engine HWSP for the solitary ringbuffer
timeline, so that we do not have to emit (using per-gen specialised
vfuncs) the breadcrumb into the distinct timeline HWSP and instead can
keep on using the common MI_STORE_DWORD_INDEX. However, to maintain the
sleight-of-hand for the global/per-context seqno switchover, we will
store both temporarily (and so use a custom offset for the shared timeline
HWSP until the switch over).
v3: Keep things simple and allocate a page for each timeline, page
sharing comes next.
v4: I was caught repeating the same MI_STORE_DWORD_IMM over and over
again in selftests.
v5: And caught red handed copying create timeline + check.
Chris Wilson [Mon, 28 Jan 2019 18:18:08 +0000 (18:18 +0000)]
drm/i915: Enlarge vma->pin_count
Previously we only accommodated having a vma pinned by a small number of
users, with the maximum being pinned for use by the display engine. As
such, we used a small bitfield only large enough to allow the vma to
be pinned twice (for back/front buffers) in each scanout plane. Keeping
the maximum permissible pin_count small allows us to quickly catch a
potential leak. However, as we want to split a 4096B page into 64
different cachelines and pin each cacheline for use by a different
timeline, we will exceed the current maximum permissible vma->pin_count
and so time has come to enlarge it.
Whilst we are here, try to pull together the similar bits:
Address/layout specification:
- bias, mappable, zone_4g: address limit specifiers
- fixed: address override, limits still apply though
- high: not strictly an address limit, but an address direction to search
Search controls:
- nonblock, nonfault, noevict
v2: Rewrite the guideline comment on bit consumption.
Chris Wilson [Mon, 28 Jan 2019 18:18:07 +0000 (18:18 +0000)]
drm/i915: Introduce concept of per-timeline (context) HWSP
Supplement the per-engine HWSP with a per-timeline HWSP. That is a
per-request pointer through which we can check a local seqno,
abstracting away the presumption of a global seqno. In this first step,
we point each request back into the engine's HWSP so everything
continues to work with the global timeline.
v2: s/i915_request_hwsp/hwsp_seqno/ to emphasis that this is the current
HW value and that we are accessing it via i915_request merely as a
convenience.
Eric Huang [Fri, 25 Jan 2019 21:29:25 +0000 (16:29 -0500)]
drm/amd/powerplay: add override pcie parameters for Vega20
It is to solve RDMA performance issue.
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cristian Birsan [Mon, 14 Jan 2019 09:43:28 +0000 (09:43 +0000)]
dt-bindings: display: Add support for PDA 91-00156-A0 panel
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with
backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5).
Adding device tree bindings for this panel.
Eugen Hristev [Mon, 14 Jan 2019 09:43:26 +0000 (09:43 +0000)]
dt-bindings: Add vendor prefix for PDA Precision Design Associates, Inc.
Precision Design Associates, Inc. (PDA) manufactures standard and custom
capacitive touch screens, LCD's embedded controllers and custom embedded
software. They specialize in industrial, rugged and outdoor
applications.
drm/panel: simple: Add support for the LeMaker BL035-RGB-002 3.5" LCD
This adds support for the 3.5" LCD panel from LeMaker, sold for use with
BananaPi boards. It comes with a 24-bit RGB888 parallel interface and
requires an active-low DE signal
Nickey Yang [Tue, 30 Oct 2018 09:15:28 +0000 (10:15 +0100)]
drm/panel: Add Kingdisplay KD097D04 panel driver
Support Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel, it is a MIPI
dual-DSI panel.
v4-resend:
- Thierry noted missing dt-bindings for v4 but forgot that he
already had applied them one kernel release back in
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ebc950fdff6d5f9250cd5a5a348af97f7d8508df
v4:
- address Philipp's comments
- real range for usleep_range and
- poweroff ordering in kingdisplay_panel_prepare
- return value beautification in panel_probe
- update author naming for full name
v3:
- address Thierry's comments
- error handling for init dsi writes in init
- unconditionally remove the panel
- don't use drm_panel_detach
- a bit of variable signednes wiggling
- I did talk to ChromeOS people and the delays really should be as short
as possible, so dropped the 100ms from the delay comments
v2:
- update timing + cmds from chromeos kernel
- new backlight API including switch to devm_of_find_backlight
- fix most of Sean Paul's comments
enable/prepare tracking seems something all panels do
- document origins of the init sequence
- lanes per dsi interface to 4 (two interfaces). Matches how tegra
and pending rockchip dual-dsi handle (dual-)dsi lanes
- spdx header instead of license boilerplate
Jagan Teki [Thu, 24 Jan 2019 21:51:31 +0000 (03:21 +0530)]
drm/panel: Add Sitronix ST7701 panel driver
ST7701 designed for small and medium sizes of TFT LCD display, is
capable of supporting up to 480RGBX864 in resolution. It provides
several system interfaces like MIPI/RGB/SPI.
Currently added support for Techstar TS8550B which is ST7701 based
480x854, 2-lane MIPI DSI LCD panel.
Driver now registering mipi_dsi device, but indeed it can extendable
for RGB if any requirement trigger in future.
drm/amd/display: Don't leak memory when updating streams
[Why]
The flip and full structures were allocated but never freed.
[How]
Free them at the end of the function. There's a small behavioral
change here with the function returning early if the allocation fails
but we wouldn't should be doing anything in that case anyway.
Fixes: c00e0cc0fdc0 ("drm/amd/display: Call into DC once per multiplane flip") Fixes: ea39594e0855 ("drm/amd/display: Perform plane updates only when needed") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Re-enable CRC capture following modeset
[Why]
During any modeset the CRTC stream is removed and a new stream is added.
This new stream doesn't carry over CRC capture state if it was
previously set.
[How]
Re-program the stream for CRC capture. The existing DRM callback can
be re-used here for the most part - the only modification needed is
additional locking now that it's called from within commit tail.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>