Junio C Hamano [Sat, 19 May 2007 07:39:31 +0000 (00:39 -0700)]
Teach "delta" attribute to pack-objects.
This teaches pack-objects to use .gitattributes mechanism so
that the user can specify certain blobs are not worth spending
CPU cycles to attempt deltification.
The name of the attrbute is "delta", and when it is set to
false, like this:
== .gitattributes ==
*.jpg -delta
they are always stored in the plain-compressed base object
representation.
Junio C Hamano [Sat, 19 May 2007 07:19:23 +0000 (00:19 -0700)]
pack-objects: pass fullname down to add_object_entry()
Instead of giving a hash for grouping, pass fullname to add_object_entry().
I want to add "do not try deltifying this object" bit to object_entry based on
the settings in .gitattributes, and hashing the name down too early would
interfere with that plan.
Shawn O. Pearce [Mon, 21 May 2007 07:20:25 +0000 (03:20 -0400)]
Teach git-describe how to run name-rev
Often users want to know not which tagged version a commit came
after, but which tagged version a commit is contained within.
This latter task is the job of git-name-rev, but most users are
looking to git-describe to do the job.
Junio suggested we make `git describe --contains` run the correct
tool, `git name-rev`, and that's exactly what we do here. The output
of name-rev was adjusted slightly through the new --name-only option,
allowing describe to execv into name-rev and maintain its current
output format.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 21 May 2007 06:51:06 +0000 (23:51 -0700)]
git-apply: Fix removal of new trailing blank lines.
The earlier code removed one newline too many from the hunk that
adds new lines at the end of the file. Also the way the code
counted the added blank lines was somewhat roundabout; I think
the way updated code does it is more direct and easier to
follow:
* We keep track of the number of blank lines added;
* While processing each line, we notice if it adds a blank
line, and increment the counter, or reset it to zero
otherwise;
* When actually we apply the data, we remove the empty lines we
counted earlier if we are applying it at the end of the
file.
Petr Baudis [Sat, 19 May 2007 00:13:29 +0000 (02:13 +0200)]
git-rev-list: Add regexp tuning options
This patch introduces --extended-regexp and --regexp-ignore-case options to
tune what kind of patterns the pattern-limiting options (--grep, --author,
...) accept.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 21 May 2007 02:58:03 +0000 (19:58 -0700)]
Merge branch 'maint'
* maint:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
Junio C Hamano [Mon, 21 May 2007 02:57:00 +0000 (19:57 -0700)]
Merge branch 'maint-1.5.1' into maint
* maint-1.5.1:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
Junio C Hamano [Sun, 20 May 2007 09:18:43 +0000 (02:18 -0700)]
Merge branch 'np/pack'
* np/pack:
deprecate the new loose object header format
make "repack -f" imply "pack-objects --no-reuse-object"
allow for undeltified objects not to be reused
Eric Wong [Sat, 19 May 2007 10:59:02 +0000 (03:59 -0700)]
git-svn: don't minimize-url when doing an init that tracks multiple paths
I didn't have a chance to test the off-by-default minimize-url
stuff enough before, but it's quite broken for people passing
the --trunk/-T, --tags/-t, --branches/-b switches to "init" or
"clone" commands.
Additionally, follow-parent functionality seems broken when we're
not connected to the root of the repository.
Default behavior for "traditional" git-svn users who only track
one directory (without needing follow-parent) should be
reasonable, as those users started using things before
minimize-url functionality existed.
Behavior for users more used to the git-svnimport-like command
line will also benefit from a more-flexible command-line than
svnimport given the assumption they're working with
non-restrictive read permissions on the repository.
I hope to properly fix these bugs when I get a chance to in the
next week or so, but I would like to get this stopgap measure of
reverting to the old behavior as soon as possible.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Sat, 19 May 2007 09:58:37 +0000 (02:58 -0700)]
git-svn: avoid crashing svnserve when creating new directories
When sorting directory names by depth (slash ("/") count) and
closing the deepest directories first (as the protocol
requires), we failed to put the root baton (with an empty string
as its key "") after top-level directories (which did not have
any slashes).
This resulted in svnserve being in a situation it couldn't
handle and caused a segmentation fault on the remote server.
This bug did not affect users of DAV and filesystem repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Confirmed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <junkio@cox.net>
Johan Herland [Wed, 16 May 2007 00:31:40 +0000 (02:31 +0200)]
user-manual: Add section on ignoring files
The todo list at the end of the user manual says that something must be
said about .gitignore. Also, there seems to be a lack of documentation
on how to choose between the various types of ignore files (.gitignore
vs. .git/info/exclude, etc.).
This patch adds a section on ignoring files which try to introduce how
to tell git about ignored files, and how the different strategies
complement eachother.
The syntax of exclude patterns is explained in a simplified manner, with
a reference to git-ls-files(1) which already contains a more thorough
explanation.
J. Bruce Fields [Tue, 15 May 2007 04:30:58 +0000 (00:30 -0400)]
user-manual: discourage shared repository
I don't really want to look like we're encouraging the shared repository
thing. Take down some of the argument for using purely
single-developer-owned repositories and collaborating using patches and
pulls instead.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
J. Bruce Fields [Fri, 18 May 2007 04:51:42 +0000 (00:51 -0400)]
tutorial: revise index introduction
The embarassing history of this tutorial is that I started it without
really understanding the index well, so I avoided mentioning it.
And we all got the idea that "index" was a word to avoid using around
newbies, but it was reluctantly mentioned that *something* had to be
said. The result is a little awkward: the discussion of the index never
actually uses that word, and isn't well-integrated into the surrounding
material.
Let's just go ahead and use the word "index" from the very start, and
try to demonstrate its use with a minimum of lecturing.
Also, remove discussion of using git-commit with explicit filenames.
We're already a bit slow here to get people to their first commit, and
I'm not convinced this is really so important.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Junio C Hamano [Sat, 19 May 2007 00:13:47 +0000 (17:13 -0700)]
Merge branch 'maint' of git://linux-nfs.org/~bfields/git into maint
* 'maint' of git://linux-nfs.org/~bfields/git:
user-manual: reorganize public git repo discussion
user-manual: listing commits reachable from some refs not others
user-manual: introduce git
user-manual: add a "counting commits" example
user-manual: move howto/using-topic-branches into manual
user-manual: move howto/make-dist.txt into user manual
Documentation: remove howto's now incorporated into manual
user-manual: move quick-start to an appendix
glossary: expand and clarify some definitions, prune cross-references
user-manual: revise birdseye-view chapter
Add a birdview-on-the-source-code section to the user manual
Petr Baudis [Fri, 18 May 2007 23:21:53 +0000 (01:21 +0200)]
Documentation: git-rev-list's "patterns"
git-rev-list(1) talks about patterns as values for the
--grep, --committed etc. parameters, without going into detail.
This patch mentions that these patterns are actually regexps.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Fri, 18 May 2007 12:33:32 +0000 (13:33 +0100)]
Fix crlf attribute handling to match documentation
gitattributes.txt says, of the crlf attribute:
Set::
Setting the `crlf` attribute on a path is meant to mark
the path as a "text" file. 'core.autocrlf' conversion
takes place without guessing the content type by
inspection.
That is to say that the crlf attribute does not force the file to have
CRLF line endings, instead it removes the autocrlf guesswork and forces
the file to be treated as text. Then, whatever line ending is defined
by the autocrlf setting is applied.
However, that is not what convert.c was doing. The conversion to CRLF
was being skipped in crlf_to_worktree() when the following condition was
true:
action == CRLF_GUESS && auto_crlf <= 0
That is to say conversion took place when not in guess mode (crlf attribute
not specified) or core.autocrlf set to true. This was wrong. It meant
that the crlf attribute being on for a given file _forced_ CRLF
conversion, when actually it should force the file to be treated as
text, and converted accordingly. The real test should simply be
auto_crlf <= 0
That is to say, if core.autocrlf is falsei (or input), conversion from
LF to CRLF is never done. When core.autocrlf is true, conversion from
LF to CRLF is done only when in CRLF_GUESS (and the guess is "text"), or
CRLF_TEXT mode.
Similarly for crlf_to_worktree(), if core.autocrlf is false, no conversion
should _ever_ take place. In reality it was only not taking place if
core.autocrlf was false _and_ the crlf attribute was unspecified.
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
René Scharfe [Fri, 18 May 2007 22:09:41 +0000 (00:09 +0200)]
git-archive: convert archive entries like checkouts do
As noted by Johan Herland, git-archive is a kind of checkout and needs
to apply any checkout filters that might be configured.
This patch adds the convenience function convert_sha1_file which returns
a buffer containing the object's contents, after converting, if necessary
(i.e. it's a combination of read_sha1_file and convert_to_working_tree).
Direct calls to read_sha1_file in git-archive are then replaced by calls
to convert_sha1_file.
Since convert_sha1_file expects its path argument to be NUL-terminated --
a convention it inherits from convert_to_working_tree -- the patch also
changes the path handling in archive-tar.c to always NUL-terminate the
string. It used to solely rely on the len field of struct strbuf before.
archive-zip.c already NUL-terminates the path and thus needs no such
change.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Tue, 15 May 2007 04:00:29 +0000 (00:00 -0400)]
user-manual: reorganize public git repo discussion
Helping a couple people set up public repos recently, I wanted to point
them at this piece of the user manual, but found it wasn't as helpful as
it could be:
- It starts with a big explanation of why you'd want a public
repository, not necessary in their case since they already knew
why they wanted that. So, separate that out.
- It skimps on some of the git-daemon details, and puts the http
export information first. Fix that.
Also group all the public repo subsections into a single section, and do
some miscellaneous related editing.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
J. Bruce Fields [Sun, 13 May 2007 05:48:47 +0000 (01:48 -0400)]
user-manual: move howto/using-topic-branches into manual
Move howto/using-topic-branches into the user manual as an example for
the "sharing development" chapter. While we're at it, remove some
discussion that's covered in earlier chapters, modernize somewhat (use
separate-heads setup, remotes, replace "whatchanged" by "log", etc.),
and replace syntax we'd need to explain by syntax we've already covered
(e.g. old..new instead of new ^old).
The result may not really describe what Tony Luck does any more.... Hope
that's not annoying.
Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
J. Bruce Fields [Sun, 13 May 2007 04:14:40 +0000 (00:14 -0400)]
user-manual: move howto/make-dist.txt into user manual
There seems to be a perception that the howto's are bit-rotting a
little. The manual might be a more visible location for some of them,
and make-dist.txt seems like a good candidate to include as an example
in the manual.
For now, incorporate much of it verbatim. Later we may want to update
the example a bit.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
J. Bruce Fields [Sun, 13 May 2007 03:52:24 +0000 (23:52 -0400)]
Documentation: remove howto's now incorporated into manual
These two howto's have both been copied into the manual. I'd rather not
maintain both versions if possible, and I think the user-manual will be
more visible than the howto directory. (Though I wouldn't mind some
duplication if people really like having them here.)
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
J. Bruce Fields [Sun, 13 May 2007 02:55:40 +0000 (22:55 -0400)]
user-manual: move quick-start to an appendix
The quick start interrupts the flow of the manual a bit. Move it to
"appendix A" but add a reference to it in the preface. Also rename the
todo chapter to "appendix B", and revise the preface a little.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
J. Bruce Fields [Sun, 13 May 2007 02:17:03 +0000 (22:17 -0400)]
glossary: expand and clarify some definitions, prune cross-references
Revise and expand some of the definitions in the glossary, based in part
on a recent thread started by a user looking for help with some of the
jargon. I've borrowed some of the language from Linus's email on that
thread. (I'm assuming standing permission to plagiarize Linus's
email....)
Also start making a few changes to mitigate the appearance of
"circularity" mentioned in that thread:
- feel free to use somewhat longer definitions and to explain
some things more than once instead of relying purely on
cross-references
- don't use cross-references when they're redundant: eliminate
self-references and repeated references to the same entry.
Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Petr Baudis [Thu, 17 May 2007 02:30:42 +0000 (04:30 +0200)]
gitweb: Allow arbitrary strings to be dug with pickaxe
Currently, there are rather draconian restrictions on the strings accepted
by the pickaxe search, which degrades its usefulness for digging in code
significantly. This patch remedies mentioned limitation.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Petr Baudis [Thu, 17 May 2007 02:31:12 +0000 (04:31 +0200)]
gitweb: Add support for grep searches
The 'grep' type of search greps the currently selected tree for given
regexp and shows the results in a fancy table with links into blob view.
The number of shown matches is limited to 1000 and the whole feature
can be turned off (grepping linux-2.6.git already makes repo.or.cz a bit
unhappy).
This second revision makes it in documentation explicit that grep accepts
regexps, and makes grep accept extended regexps instead of basic regexps.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Petr Baudis [Thu, 17 May 2007 02:24:19 +0000 (04:24 +0200)]
gitweb: Normalize searchbar font size
Currently, searchbar font was as big as the page heading font, because
font-size was made relative - but to the parent element, which was for some
reason indeed page_header. Since that seems to be illogical to me, I just
moved the div.search outside of div.page_header. I'm no CSS/DOM expert but
no adverse effects were observed by me.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Thu, 17 May 2007 20:54:28 +0000 (22:54 +0200)]
gitweb: Fix error in git_patchset_body for deletion in merge commit
Checking if $diffinfo->{'status'} is equal 'D' is no longer the way to
check if the file was deleted in result. For merge commits
$diffinfo->{'status'} is reference to array of statuses for each
parent. Use the fact that $diffinfo->{'to_id'} is all zeros as sign
that file was deleted in result.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Thu, 17 May 2007 22:01:50 +0000 (18:01 -0400)]
git-gui: Gracefully handle bad TCL_PATH at compile time
Petr Baudis pointed out the main git.git repository's Makefile dies
now if git-gui 0.7.0-rc1 or later is being used and TCL_PATH was not
set to a working tclsh program path. This breaks people who may have
a working build configuration today and suddenly upgrade to the latest
git release.
The tclIndex is required for git-gui to load its associated lib files,
but using the Tcl auto_load procedure to source only the files we need
is a performance optimization. We can emulate the auto_load by just
source'ing every file in that directory, assuming we source class.tcl
first to initialize our crude class system.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jakub Narebski [Wed, 16 May 2007 22:05:55 +0000 (00:05 +0200)]
gitweb: Empty patch for merge means trivial merge, not no differences
Earlier commit 4280cde95fa4e3fb012eb6d0c239a7777baaf60c made gitweb
show "No differences found" message for empty diff, for the HTML
output. But for merge commits, either -c format we use or --cc format,
empty diff doesn't mean no differences, but trivial merge.
Show "Trivial merge" message instead of "No differences found" for
merges.
While at it reword conditional in the code for easier reading.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git notify the user about host resolution/connection attempts.
This is useful both as a progress indicator on slow links, and helps
reassure the user there are no firewall problems.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 16 May 2007 19:43:05 +0000 (12:43 -0700)]
Merge branch 'maint'
* maint:
format-patch: add MIME-Version header when we add content-type.
Fixed link in user-manual
import-tars: Use the "Link indicator" to identify directories
git name-rev writes beyond the end of malloc() with large generations
Documentation/branch: fix small typo in -D example
Jakub Narebski [Tue, 15 May 2007 23:56:10 +0000 (01:56 +0200)]
gitweb: Separate search regexp from search text
Separate search text, which is saved in $searchtext global variable,
and is used in links, as default value for the textfield in search
form, and for pickaxe search, from search regexp, which is saved in
$search_regexp global variable, and is used as parameter to --grep,
--committer or --author options to git-rev-list, and for searching
commit body in gitweb. For now $search_regexp is unconditionallt
equal to quotemeta($searchtext), meaning that we always search for
fixed string.
This fixes bug where 'next page' links for 'search' view didn't work
for searchtext containing quotable characters, like `@'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Tue, 15 May 2007 23:59:55 +0000 (01:59 +0200)]
gitweb: Do not use absolute font sizes
David Kågedal proposed that gitweb should explicitely request
being somewhat smaller than normal, because it has good use for
long lines. However gitweb presents a table with several
columns, so having wider line is OK for it. Therefore explicit
'font-size: small' would make sense. Apparently many people on
the list seem to agree with him.
import-tars: Use the "Link indicator" to identify directories
Earlier, we used the mode to determine if a name was associated with
a directory. This fails, since some tar programs do not set the mode
correctly. However, the link indicator _has_ to be set correctly.
Noticed by Chris Riddoch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johan Herland [Tue, 15 May 2007 12:49:22 +0000 (14:49 +0200)]
Ensure return value from xread() is always stored into an ssize_t
This patch fixes all calls to xread() where the return value is not
stored into an ssize_t. The patch should not have any effect whatsoever,
other than putting better/more appropriate type names on variables.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Johan Herland [Tue, 15 May 2007 12:39:25 +0000 (14:39 +0200)]
Fix signedness on return value from xread()
The return value from xread() is ssize_t.
Paolo Teti <paolo.teti@gmail.com> pointed out that in this case, the
signed return value was assigned to an unsigned type (size_t). This patch
fixes that.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
This allocation is only sufficient if the generation number is
less than 5 digits, in my case generation was 13432. In reality
parent_number can be up to 16 so that also can require two digits,
reducing us to 3 digits before we are at risk of blowing this
allocation.
This patch introduces a decimal_length() which approximates the
number of digits a type may hold, it produces the following:
Type Longest Value Len Est
---- ------------- --- ---
unsigned char 256 3 4
unsigned short 65536 5 6
unsigned long 4294967296 10 11
unsigned long long 18446744073709551616 20 21
char -128 4 4
short -32768 6 6
long -2147483648 11 11
long long -9223372036854775808 20 21
This is then used to size the new_name.
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Optimized cvsexportcommit: calling 'cvs status' once instead of once per touched file.
Runtime is now independent of the number of modified files.
The old implementation executed 'cvs status' for each file touched by the patch
to be applied. The new code calls 'cvs status' only once with all touched files
and parses cvs's output to collect all available status information.
Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Mon, 14 May 2007 13:37:25 +0000 (14:37 +0100)]
Use $Id$ as the ident attribute keyword rather than $ident$ to be consistent with other VCSs
$Id$ is present already in SVN and CVS; it would mean that people
converting their existing repositories won't have to make any changes to
the source files should they want to make use of the ident attribute.
Given that it's a feature that's meant to calm those very people, it
seems obtuse to make them edit every file just to make use of it.
I think that bzr uses $Id$; Mercurial has examples hooks for $Id$;
monotone has $Id$ on its wishlist. I can't think of a good reason not
to stick with the de-facto standard and call ours $Id$ instead of
$ident$.
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 15 May 2007 01:50:01 +0000 (18:50 -0700)]
Merge branch 'maint'
* maint:
Prepare for 1.5.1.5 Release Notes
gitweb: Add a few comments about %feature hash
git-am: Clean up the asciidoc documentation
Documentation: format-patch has no --mbox option
builtin-log.c: Fix typo in comment
Fix git-clone buglet for remote case.
git-applymbox and git-mailinfo refer to a --mbox option of
git-format-patch when talking about their -k options. But there
is no such option. What -k does to the former two commands is
to keep the Subject: lines unmunged, meant to be used on output
generated with format-patch -k.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 14 May 2007 21:24:02 +0000 (14:24 -0700)]
Fix git-clone buglet for remote case.
c2f599e09fd0496413d1744b5b89b9b5c223555d introduced a buglet while
cloning from a remote URL; we forgot to squelch the unnecessary
error message when we try to cd to the given "remote" name,
in order to see if it is a local directory.
After we send I HATE YOU we should probably exit and not happily
continue with I LOVE YOU and further communication.
Most clients will probably just exit and ignore everything we
send after the I HATE YOU and it is not a security problem
either because we don't really care about the user name anyway.
But it is still the right thing to do.
[jc: with a minor fixup to its exit code...]
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Acked-by: "Martin Langhoff" <martin.langhoff@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>