Branden Bonaby [Thu, 3 Oct 2019 21:01:49 +0000 (17:01 -0400)]
drivers: hv: vmbus: Introduce latency testing
Introduce user specified latency in the packet reception path
By exposing the test parameters as part of the debugfs channel
attributes. We will control the testing state via these attributes.
Wei Hu [Wed, 18 Sep 2019 06:03:20 +0000 (06:03 +0000)]
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
Without deferred IO support, hyperv_fb driver informs the host to refresh
the entire guest frame buffer at fixed rate, e.g. at 20Hz, no matter there
is screen update or not. This patch supports deferred IO for screens in
graphics mode and also enables the frame buffer on-demand refresh. The
highest refresh rate is still set at 20Hz.
Currently Hyper-V only takes a physical address from guest as the starting
address of frame buffer. This implies the guest must allocate contiguous
physical memory for frame buffer. In addition, Hyper-V Gen 2 VMs only
accept address from MMIO region as frame buffer address. Due to these
limitations on Hyper-V host, we keep a shadow copy of frame buffer
in the guest. This means one more copy of the dirty rectangle inside
guest when doing the on-demand refresh. This can be optimized in the
future with help from host. For now the host performance gain from deferred
IO outweighs the shadow copy impact in the guest.
Signed-off-by: Wei Hu <weh@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Hu [Thu, 5 Sep 2019 09:11:53 +0000 (09:11 +0000)]
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
Beginning from Windows 10 RS5+, VM screen resolution is obtained from host.
The "video=hyperv_fb" boot time option is not needed, but still can be
used to overwrite what the host specifies. The VM resolution on the host
could be set by executing the powershell "set-vmvideo" command.
Signed-off-by: Iouri Tarassov <iourit@microsoft.com> Signed-off-by: Wei Hu <weh@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Dexuan Cui [Wed, 11 Sep 2019 23:35:16 +0000 (23:35 +0000)]
scsi: storvsc: Add the support of hibernation
When we're in storvsc_suspend(), we're sure the SCSI layer has quiesced the
scsi device by scsi_bus_suspend() -> ... -> scsi_device_quiesce(), so the
low level SCSI adapter driver only needs to suspend/resume its own state.
Signed-off-by: Dexuan Cui <decui@microsoft.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Parri [Tue, 15 Oct 2019 11:46:46 +0000 (13:46 +0200)]
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
Currently, Linux guests negotiate the VMBus version with Hyper-V
and use the highest available VMBus version they can connect to.
This has some drawbacks: by using the highest available version,
certain code paths are never executed and can not be tested when
the guest runs on the newest host.
Add the module parameter "max_version", to upper-bound the VMBus
versions guests can negotiate.
Suggested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Hyper-V has added VMBus protocol versions 5.1 and 5.2 in recent release
versions. Allow Linux guests to negotiate these new protocol versions
on versions of Hyper-V that support them. While on this, also allow
guests to negotiate the VMBus protocol version 4.1 (which was missing).
Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Parri [Tue, 15 Oct 2019 11:46:44 +0000 (13:46 +0200)]
Drivers: hv: vmbus: Introduce table of VMBus protocol versions
The technique used to get the next VMBus version seems increasisly
clumsy as the number of VMBus versions increases. Performance is
not a concern since this is only done once during system boot; it's
just that we'll end up with more lines of code than is really needed.
As an alternative, introduce a table with the version numbers listed
in order (from the most recent to the oldest). vmbus_connect() loops
through the versions listed in the table until it gets an accepted
connection or gets to the end of the table (invalid version).
Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Torvalds [Sun, 3 Nov 2019 16:25:25 +0000 (08:25 -0800)]
Merge tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"The USB sub-maintainers woke up this past week and sent a bunch of
tiny fixes. Here are a lot of small patches that that resolve a bunch
of reported issues in the USB core, drivers, serial drivers, gadget
drivers, and of course, xhci :)
All of these have been in linux-next with no reported issues"
* tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host
usb: cdns3: gadget: reset EP_CLAIMED flag while unloading
USB: serial: whiteheat: fix line-speed endianness
USB: serial: whiteheat: fix potential slab corruption
USB: gadget: Reject endpoints with 0 maxpacket value
UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")
usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
usbip: Fix free of unallocated memory in vhci tx
usbip: tools: Fix read_usb_vudc_device() error path handling
usb: xhci: fix __le32/__le64 accessors in debugfs code
usb: xhci: fix Immediate Data Transfer endianness
xhci: Fix use-after-free regression in xhci clear hub TT implementation
USB: ldusb: fix control-message timeout
USB: ldusb: use unsigned size format specifiers
USB: ldusb: fix ring-buffer locking
USB: Skip endpoints with 0 maxpacket length
usb: cdns3: gadget: Don't manage pullups
usb: dwc3: remove the call trace of USBx_GFLADJ
usb: gadget: configfs: fix concurrent issue between composite APIs
...
Linus Torvalds [Sat, 2 Nov 2019 18:28:59 +0000 (11:28 -0700)]
Merge tag 'hwmon-for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix read timeout problem in ina3221 driver
- Fix wrong bitmask in nct7904 driver
* tag 'hwmon-for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ina3221) Fix read timeout issue
hwmon: (nct7904) Fix the incorrect value of vsen_mask & tcpu_mask & temp_mode in nct7904_data struct.
Linus Torvalds [Sat, 2 Nov 2019 18:23:09 +0000 (11:23 -0700)]
Merge tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"It turned out that relying solely on drivers storing all the PWM state
in hardware was a little premature and causes a number of subtle (and
some not so subtle) regressions. Revert the offending patch for now"
* tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
Revert "pwm: Let pwm_get_state() return the last implemented state"
Linus Torvalds [Sat, 2 Nov 2019 18:15:52 +0000 (11:15 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4]
and one core change in sd that fixes an I/O failure on DIF type 3
devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: stop timer in shutdown path
scsi: sd: define variable dif as unsigned int instead of bool
scsi: target: cxgbit: Fix cxgbit_fw4_ack()
scsi: qla2xxx: Fix partial flash write of MBI
scsi: qla2xxx: Initialized mailbox to prevent driver load failure
scsi: lpfc: Honor module parameter lpfc_use_adisc
scsi: ufs-bsg: Wake the device before sending raw upiu commands
scsi: lpfc: Check queue pointer before use
scsi: qla2xxx: fixup incorrect usage of host_byte
Linus Torvalds [Sat, 2 Nov 2019 18:08:19 +0000 (11:08 -0700)]
Merge tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Our recent cleanup of EEH led to an oops on bare metal machines when
the cxl (CAPI) driver creates virtual devices for an attached FPGA
accelerator.
The "secure virtual machine" support we added in v5.4 had a bug if the
kernel was relocated (moved during boot), in those cases the signature
of the kernel text wouldn't verify and the Ultravisor would refuse to
run the VM.
A recent change to disable interrupts before calling
arch_cpu_idle_dead() caused a WARN_ON() in our bare metal CPU offline
code to always trigger.
The KUAP (SMAP) support we added for 32-bit Book3S had a bug if the
address range crossed a segment (256MB) boundary which could lead to
spurious faults.
Thanks to: Christophe Leroy, Frederic Barrat, Michael Anderson,
Nicholas Piggin, Sam Bobroff, Thiago Jung Bauermann"
* tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Fix CPU idle to be called with IRQs disabled
powerpc/prom_init: Undo relocation before entering secure mode
powerpc/powernv/eeh: Fix oops when probing cxl devices
powerpc/32s: fix allow/prevent_user_access() when crossing segment boundaries.
Linus Torvalds [Sat, 2 Nov 2019 18:00:26 +0000 (11:00 -0700)]
Merge tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix cpu idle time accounting
- Fix stack unwinder case when both pt_regs and sp are specified
- Fix information leak via cmm timeout proc handler
* tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/idle: fix cpu idle time calculation
s390/unwind: fix mixing regs and sp
s390/cmm: fix information leak in cmm_timeout_handler()
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
Linus Torvalds [Sat, 2 Nov 2019 00:37:44 +0000 (17:37 -0700)]
Merge tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"This contains two delegation fixes (with the RCU lock leak fix marked
for stable), and three patches to fix destroying the the sunrpc back
channel.
Stable bugfixes:
- Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
Other fixes:
- The TCP back channel mustn't disappear while requests are
outstanding
- The RDMA back channel mustn't disappear while requests are
outstanding
- Destroy the back channel when we destroy the host transport
- Don't allow a cached open with a revoked delegation"
* tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
NFSv4: Don't allow a cached open with a revoked delegation
SUNRPC: Destroy the back channel when we destroy the host transport
SUNRPC: The RDMA back channel mustn't disappear while requests are outstanding
SUNRPC: The TCP back channel mustn't disappear while requests are outstanding
Linus Torvalds [Sat, 2 Nov 2019 00:33:12 +0000 (17:33 -0700)]
Merge tag 'for-linus-20191101' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two small nvme fixes, one is a fabrics connection fix, the other one
a cleanup made possible by that fix (Anton, via Keith)
- Fix requeue handling in umb ubd (Anton)
- Fix spin_lock_irq() nesting in blk-iocost (Dan)
- Three small io_uring fixes:
- Install io_uring fd after done with ctx (me)
- Clear ->result before every poll issue (me)
- Fix leak of shadow request on error (Pavel)
* tag 'for-linus-20191101' of git://git.kernel.dk/linux-block:
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
Linus Torvalds [Sat, 2 Nov 2019 00:20:53 +0000 (17:20 -0700)]
Merge tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"One fix for PCIe users:
- Fix legacy PCI I/O port access emulation
One set of cleanups:
- Resolve most of the warnings generated by sparse across arch/riscv.
No functional changes
And one MAINTAINERS update:
- Update Palmer's E-mail address"
* tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Change to my personal email address
RISC-V: Add PCIe I/O BAR memory mapping
riscv: for C functions called only from assembly, mark with __visible
riscv: fp: add missing __user pointer annotations
riscv: add missing header file includes
riscv: mark some code and data as file-static
riscv: init: merge split string literals in preprocessor directive
riscv: add prototypes for assembly language functions from head.S
Jakub Kicinski [Fri, 1 Nov 2019 03:07:00 +0000 (20:07 -0700)]
net: fix installing orphaned programs
When netdevice with offloaded BPF programs is destroyed
the programs are orphaned and removed from the program
IDA - their IDs get released (the programs may remain
accessible via existing open file descriptors and pinned
files). After IDs are released they are set to 0.
This confuses dev_change_xdp_fd() because it compares
the __dev_xdp_query() result where 0 means no program
with prog->aux->id where 0 means orphaned.
dev_change_xdp_fd() would have incorrectly returned success
even though it had not installed the program.
Since drivers already catch this case via bpf_offload_dev_match()
let them handle this case. The error message drivers produce in
this case ("program loaded for a different device") is in fact
correct as the orphaned program must had to be loaded for a
different device.
Fixes: c14a9f633d9e ("net: Don't call XDP_SETUP_PROG when nothing is changed") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 1 Nov 2019 03:06:59 +0000 (20:06 -0700)]
net: cls_bpf: fix NULL deref on offload filter removal
Commit 401192113730 ("net: sched: refactor block offloads counter
usage") missed the fact that either new prog or old prog may be
NULL.
Fixes: 401192113730 ("net: sched: refactor block offloads counter usage") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 1 Nov 2019 03:06:58 +0000 (20:06 -0700)]
selftests: bpf: Skip write only files in debugfs
DebugFS for netdevsim now contains some "action trigger" files
which are write only. Don't try to capture the contents of those.
Note that we can't use os.access() because the script requires
root.
Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.
Fixes: d6a61f80b871 ("soreuseport: test mixed v4/v6 sockets") Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Cc: Craig Gallek <cgallek@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 31 Oct 2019 23:10:21 +0000 (00:10 +0100)]
r8169: fix wrong PHY ID issue with RTL8168dp
As reported in [0] at least one RTL8168dp version has problems
establishing a link. This chip version has an integrated RTL8211b PHY,
however the chip seems to report a wrong PHY ID, resulting in a wrong
PHY driver (for Generic Realtek PHY) being loaded.
Work around this issue by adding a hook to r8168dp_2_mdio_read()
for returning the correct PHY ID.
Fixes: 242cd9b5866a ("r8169: use phy_resume/phy_suspend") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 31 Oct 2019 22:54:05 +0000 (15:54 -0700)]
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.
Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 31 Oct 2019 22:42:26 +0000 (15:42 -0700)]
net: phylink: Fix phylink_dbg() macro
The phylink_dbg() macro does not follow dynamic debug or defined(DEBUG)
and as a result, it spams the kernel log since a PR_DEBUG level is
currently used. Fix it to be defined appropriately whether
CONFIG_DYNAMIC_DEBUG or defined(DEBUG) are set.
Fixes: 17091180b152 ("net: phylink: Add phylink_{printk, err, warn, info, dbg} macros") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yangchun Fu [Fri, 1 Nov 2019 17:09:56 +0000 (10:09 -0700)]
gve: Fixes DMA synchronization.
Synces the DMA buffer properly in order for CPU and device to see
the most up-to-data data.
Signed-off-by: Yangchun Fu <yangchun@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 1 Nov 2019 17:32:19 +0000 (10:32 -0700)]
inet: stop leaking jiffies on the wire
Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.
RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.
Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.
Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.
Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Thiemo Nagel <tnagel@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 1 Nov 2019 21:50:27 +0000 (14:50 -0700)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-11-01
This series contains updates to e1000, igb, igc, ixgbe, i40e and driver
documentation.
Lyude Paul fixes an issue where a fatal read error occurs when the
device is unplugged from the machine. So change the read error into a
warn while the device is still present.
Manfred Rudigier found that the i350 device was not apart of the "Media
Auto Sense" feature, yet the device supports it. So add the missing
i350 device to the check and fix an issue where the media auto sense
would flip/flop when no cable was connected to the port causing spurious
kernel log messages.
I fixed an issue where the fix to resolve receive buffer starvation was
applied in more than one place in the driver, one being the incorrect
location in the i40e driver.
Wenwen Wang fixes a potential memory leak in e1000 where allocated
memory is not properly cleaned up in one of the error paths.
Jonathan Neuschäfer cleans up the driver documentation to be consistent
and remove the footnote reference, since the footnote no longer exists in
the documentation.
Igor Pylypiv cleans up a duplicate clearing of a bit, no need to clear
it twice.
v2: Fixed alignment issue in patch 3 of the series based on community
feedback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Pylypiv [Fri, 4 Oct 2019 06:53:57 +0000 (23:53 -0700)]
ixgbe: Remove duplicate clear_bit() call
__IXGBE_RX_BUILD_SKB_ENABLED bit is already cleared.
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
These asterisks were once references to a line that said:
"* Other names and brands may be claimed as the property of others."
But now, they serve no purpose; they can only irritate the reader.
Fixes: de3edab4276c ("e1000: update README for e1000") Fixes: a3fb65680f65 ("e100.txt: Cleanup license info in kernel doc") Fixes: da8c01c4502a ("e1000e.txt: Add e1000e documentation") Fixes: f12a84a9f650 ("Documentation: fm10k: Add kernel documentation") Fixes: b55c52b1938c ("igb.txt: Add igb documentation") Fixes: c4e9b56e2442 ("igbvf.txt: Add igbvf Documentation") Fixes: d7064f4c192c ("Documentation/networking/: Update Intel wired LAN driver documentation") Fixes: c4b8c01112a1 ("ixgbevf.txt: Update ixgbevf documentation") Fixes: 1e06edcc2f22 ("Documentation: i40e: Prepare documentation for RST conversion") Fixes: 105bf2fe6b32 ("i40evf: add driver to kernel build system") Fixes: 1fae869bcf3d ("Documentation: ice: Prepare documentation for RST conversion") Fixes: df69ba43217d ("ionic: Add basic framework for IONIC Network device driver") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Wenwen Wang [Mon, 12 Aug 2019 05:59:21 +0000 (00:59 -0500)]
e1000: fix memory leaks
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jeff Kirsher [Mon, 7 Oct 2019 22:07:24 +0000 (15:07 -0700)]
i40e: Fix receive buffer starvation for AF_XDP
Magnus's fix to resolve a potential receive buffer starvation for AF_XDP
got applied to both the i40e_xsk_umem_enable/disable() functions, when it
should have only been applied to the "enable". So clean up the undesired
code in the disable function.
CC: Magnus Karlsson <magnus.karlsson@intel.com> Fixes: 1f459bdc2007 ("i40e: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Manfred Rudigier [Thu, 15 Aug 2019 20:55:20 +0000 (13:55 -0700)]
igb: Fix constant media auto sense switching when no cable is connected
At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.
If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.
The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Fri, 1 Nov 2019 18:49:54 +0000 (11:49 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix two scheduler topology bugs/oversights on Juno r0 2+4 big.LITTLE
systems"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/topology: Allow sched_asym_cpucapacity to be disabled
sched/topology: Don't try to build empty sched domains
Linus Torvalds [Fri, 1 Nov 2019 18:40:47 +0000 (11:40 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes: an ABI fix for a reserved field, AMD IBS fixes, an Intel
uncore PMU driver fix and a header typo fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/headers: Fix spelling s/EACCESS/EACCES/, s/privilidge/privilege/
perf/x86/uncore: Fix event group support
perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h)
perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity
perf/core: Start rejecting the syscall with attr.__reserved_2 set
Linus Torvalds [Fri, 1 Nov 2019 18:32:50 +0000 (11:32 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Various fixes all over the map: prevent boot crashes on HyperV,
classify UEFI randomness as bootloader randomness, fix EFI boot for
the Raspberry Pi2, fix efi_test permissions, etc"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/efi_test: Lock down /dev/efi_test and require CAP_SYS_ADMIN
x86, efi: Never relocate kernel below lowest acceptable address
efi: libstub/arm: Account for firmware reserved memory at the base of RAM
efi/random: Treat EFI_RNG_PROTOCOL output as bootloader randomness
efi/tpm: Return -EINVAL when determining tpm final events log size fails
efi: Make CONFIG_EFI_RCI2_TABLE selectable on x86 only
David S. Miller [Fri, 1 Nov 2019 17:36:46 +0000 (10:36 -0700)]
Merge tag 'wireless-drivers-2019-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.4
Third set of fixes for 5.4. Most of them are for iwlwifi but important
fixes also for rtlwifi and mt76, the overflow fix for rtlwifi being
most important.
iwlwifi
* fix merge damage on earlier patch
* various fixes to device id handling
* fix scan config command handling which caused firmware asserts
rtlwifi
* fix overflow on P2P IE handling
* don't deliver too small frames to mac80211
mt76
* disable PCIE_ASPM
* fix buffer DMA unmap on certain cases
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 1 Nov 2019 17:03:46 +0000 (10:03 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"These are almost exclusively related to CPU errata in CPUs from
Broadcom and Qualcomm where the workarounds were either not being
enabled when they should have been or enabled when they shouldn't have
been.
The only "interesting" fix is ensuring that writeable, shared mappings
are initially mapped as clean since we inadvertently broke the logic
back in v4.14 and then noticed the problem via code inspection the
other day.
The only critical issue we have outstanding is a sporadic NULL
dereference in the scheduler, which doesn't appear to be
arm64-specific and PeterZ is tearing his hair out over it at the
moment.
Summary:
- Enable CPU errata workarounds for Broadcom Brahma-B53
- Enable CPU errata workarounds for Qualcomm Hydra/Kryo CPUs
- Fix initial dirty status of writeable, shared mappings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: apply ARM64_ERRATUM_843419 workaround for Brahma-B53 core
arm64: Brahma-B53 is SSB and spectre v2 safe
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core
arm64: cpufeature: Enable Qualcomm Falkor errata 1009 for Kryo
arm64: cpufeature: Enable Qualcomm Falkor/Kryo errata 1003
arm64: Ensure VM_WRITE|VM_SHARED ptes are clean by default
Linus Torvalds [Fri, 1 Nov 2019 16:54:38 +0000 (09:54 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"generic:
- fix memory leak on failure to create VM
x86:
- fix MMU corner case with AMD nested paging disabled"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active
kvm: call kvm_arch_destroy_vm if vm creation fails
kvm: Allocate memslots and buses before calling kvm_arch_init_vm
Linus Torvalds [Fri, 1 Nov 2019 16:41:08 +0000 (09:41 -0700)]
Merge tag 'drm-fixes-2019-11-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the regular drm fixes pull request for 5.4-rc6. It's a bit
larger than I'd like but then last week was quieter than usual.
The main fixes are amdgpu, and the two bigger area are navi fixes
which are the newest GPU range so still getting actively fixed up, but
also a bunch of clang stack alignment fixes (as amdgpu uses double in
some places).
Otherwise it's all fairly run of the mill fixes, i915, panfrost,
etnaviv, v3d and radeon, along with a core scheduler fix.
Summary:
amdgpu:
- clang alignment fixes
- Updated golden settings
- navi: gpuvm, sdma and display fixes
- Freesync fix
- Gamma fix for DCN
- DP dongle detection fix
- vega10: Fix for undervolting
* tag 'drm-fixes-2019-11-01' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amdgpu: enable -msse2 for GCC 7.1+ users
drm/amdgpu: fix stack alignment ABI mismatch for GCC 7.1+
drm/amdgpu: fix stack alignment ABI mismatch for Clang
drm/radeon: Fix EEH during kexec
drm/amdgpu/gmc10: properly set BANK_SELECT and FRAGMENT_SIZE
drm/amdgpu/powerplay/vega10: allow undervolting in p7
dc.c:use kzalloc without test
drm/amd/display: setting the DIG_MODE to the correct value.
drm/amd/display: Passive DP->HDMI dongle detection fix
drm/amd/display: add 50us buffer as WA for pstate switch in active
drm/amd/display: Allow inverted gamma
drm/amd/display: do not synchronize "drr" displays
drm/amdgpu: If amdgpu_ib_schedule fails return back the error.
drm/sched: Set error to s_fence if HW job submission failed.
drm/amdgpu/gfx10: update gfx golden settings for navi12
drm/amdgpu/gfx10: update gfx golden settings for navi14
drm/amdgpu/gfx10: update gfx golden settings
drm/amd/display: Change Navi14's DWB flag to 1
drm/amdgpu/sdma5: do not execute 0-sized IBs (v2)
drm/amdgpu: Fix SDMA hang when performing VKexample test
...
Linus Torvalds [Fri, 1 Nov 2019 16:30:48 +0000 (09:30 -0700)]
Merge tag 'pm-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced (mostly theoretical) issue that the requests
to confine the maximum CPU frequency coming from the platform firmware
may not be taken into account if multiple CPUs are covered by one
cpufreq policy on a system with ACPI"
* tag 'pm-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Add QoS requests for all CPUs
Linus Torvalds [Fri, 1 Nov 2019 16:21:48 +0000 (09:21 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A number of bug fixes and a regression fix:
- Various issues from static analysis in hfi1, uverbs, hns, and cxgb4
- Fix for deadlock in a case when the new auto RDMA module loading is
used
- Missing _irq notation in a prior -rc patch found by lockdep
- Fix a locking and lifetime issue in siw
- Minor functional bug fixes in cxgb4, mlx5, qedr
- Fix a regression where vlan interfaces no longer worked with RDMA
CM in some cases"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Prevent memory leaks of eq->buf_list
RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure case
RDMA/mlx5: Use irq xarray locking for mkey_table
IB/core: Avoid deadlock during netlink message handling
RDMA/nldev: Skip counter if port doesn't match
RDMA/uverbs: Prevent potential underflow
IB/core: Use rdma_read_gid_l2_fields to compare GID L2 fields
RDMA/qedr: Fix reported firmware version
RDMA/siw: free siw_base_qp in kref release routine
RDMA/iwcm: move iw_rem_ref() calls out of spinlock
iw_cxgb4: fix ECN check on the passive accept
IB/hfi1: Use a common pad buffer for 9B and 16B packets
IB/hfi1: Avoid excessive retry for TID RDMA READ request
RDMA/mlx5: Clear old rate limit when closing QP
Linus Torvalds [Fri, 1 Nov 2019 16:18:00 +0000 (09:18 -0700)]
Merge tag 'sound-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A couple of regression fixes and a fix for mutex deadlock at
hog-unplug, as well as other device-specific fixes:
- A commit to avoid the spurious unsolicited interrupt on HD-audio
bus caused a stall at shutdown, so it's reverted now.
- The recent support of AMD/Nvidia audio component binding caused a
mutex deadlock; fixed by splitting to another mutex
- The device hot-unplug and the ALSA timer close combo may lead to
another mutex deadlock; fixed by moving put_device() calls
- Usual device-specific small quirks for HD- and USB-audio drivers
- An old error check fix in FireWire driver"
* tag 'sound-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Fix mutex deadlock at releasing card
ALSA: hda - Fix mutex deadlock in HDMI codec driver
Revert "ALSA: hda: Flush interrupts on disabling"
ALSA: bebob: Fix prototype of helper function to return negative value
ALSA: hda/realtek - Fix 2 front mics of codec 0x623
ALSA: hda/realtek - Add support for ALC623
ALSA: usb-audio: Add DSD support for Gustard U16/X26 USB Interface
Trond Myklebust [Thu, 31 Oct 2019 22:40:33 +0000 (18:40 -0400)]
NFS: Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
A typo in nfs4_refresh_delegation_stateid() means we're leaking an
RCU lock, and always returning a value of 'false'. As the function
description states, we were always supposed to return 'true' if a
matching delegation was found.
Fixes: 12f275cdd163 ("NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Florian Fainelli [Thu, 31 Oct 2019 21:47:25 +0000 (14:47 -0700)]
arm64: apply ARM64_ERRATUM_843419 workaround for Brahma-B53 core
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_843419 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_843419 into an erratum list and use
cpucap_multi_entry_cap_matches to match our entries.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Will Deacon <will@kernel.org>
Doug Berger [Thu, 31 Oct 2019 21:47:23 +0000 (14:47 -0700)]
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_845719 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_845719 into an erratum list.
Dave Airlie [Fri, 1 Nov 2019 01:09:42 +0000 (11:09 +1000)]
Merge tag 'drm-misc-fixes-2019-10-30-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- three fixes for panfrost, one to silence a warning, one to fix
runtime_pm and one to prevent bogus pointer dereferences
- one fix for a memleak in v3d
Dave Airlie [Fri, 1 Nov 2019 01:08:24 +0000 (11:08 +1000)]
Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes
One memory corruption fix in the MMUv2 GPU coredump code, a deadlock
fix also in the coredump code and reintroduction of a helpful message,
which got dropped by accident in this cycle.
Manfred Rudigier [Thu, 15 Aug 2019 20:55:19 +0000 (13:55 -0700)]
igb: Enable media autosense for the i350.
This patch enables the hardware feature "Media Auto Sense" also on the
i350. It works in the same way as on the 82850 devices. Hardware designs
using dual PHYs (fiber/copper) can enable this feature by setting the MAS
enable bits in the NVM_COMPAT register (0x03) in the EEPROM.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Lyude Paul [Thu, 22 Aug 2019 18:33:18 +0000 (14:33 -0400)]
igb/igc: Don't warn on fatal read failures when the device is removed
Fatal read errors are worth warning about, unless of course the device
was just unplugged from the machine - something that's a rather normal
occurrence when the igb/igc adapter is located on a Thunderbolt dock. So,
let's only WARN() if there's a fatal read error while the device is
still present.
This fixes the following WARN splat that's been appearing whenever I
unplug my Caldigit TS3 Thunderbolt dock from my laptop:
Eric Dumazet [Wed, 30 Oct 2019 17:05:46 +0000 (10:05 -0700)]
tcp: increase tcp_max_syn_backlog max value
tcp_max_syn_backlog default value depends on memory size
and TCP ehash size. Before this patch, the max value
was 2048 [1], which is considered too small nowadays.
Increase it to 4096 to match the recent SOMAXCONN change.
[1] This is with TCP ehash size being capped to 524288 buckets.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Yue Cao <ycao009@ucr.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 30 Oct 2019 16:36:20 +0000 (09:36 -0700)]
net: increase SOMAXCONN to 4096
SOMAXCONN is /proc/sys/net/core/somaxconn default value.
It has been defined as 128 more than 20 years ago.
Since it caps the listen() backlog values, the very small value has
caused numerous problems over the years, and many people had
to raise it on their hosts after beeing hit by problems.
Google has been using 1024 for at least 15 years, and we increased
this to 4096 after TCP listener rework has been completed, more than
4 years ago. We got no complain of this change breaking any
legacy application.
Many applications indeed setup a TCP listener with listen(fd, -1);
meaning they let the system select the backlog.
Raising SOMAXCONN lowers chance of the port being unavailable under
even small SYNFLOOD attack, and reduces possibilities of side channel
vulnerabilities.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Yue Cao <ycao009@ucr.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 31 Oct 2019 16:20:30 +0000 (18:20 +0200)]
netdevsim: Fix use-after-free during device dismantle
Commit da58f90f11f5 ("netdevsim: Add devlink-trap support") added
delayed work to netdevsim that periodically iterates over the registered
netdevsim ports and reports various packet traps via devlink.
While the delayed work takes the 'port_list_lock' mutex to protect
against concurrent addition / deletion of ports, during device creation
/ dismantle ports are added / deleted without this lock, which can
result in a use-after-free [1].
Fix this by making sure that the ports list is always modified under the
lock.
[1]
[ 59.205543] ==================================================================
[ 59.207748] BUG: KASAN: use-after-free in nsim_dev_trap_report_work+0xa67/0xad0
[ 59.210247] Read of size 8 at addr ffff8883cbdd3398 by task kworker/3:1/38
[ 59.212584]
[ 59.213148] CPU: 3 PID: 38 Comm: kworker/3:1 Not tainted 5.4.0-rc3-custom-16119-ge6abb5f0261e #2013
[ 59.215896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[ 59.218384] Workqueue: events nsim_dev_trap_report_work
[ 59.219428] Call Trace:
[ 59.219924] dump_stack+0xa9/0x10e
[ 59.220623] print_address_description.constprop.4+0x21/0x340
[ 59.221976] ? vprintk_func+0x66/0x240
[ 59.222752] __kasan_report.cold.8+0x78/0x91
[ 59.223602] ? nsim_dev_trap_report_work+0xa67/0xad0
[ 59.224603] kasan_report+0xe/0x20
[ 59.225296] nsim_dev_trap_report_work+0xa67/0xad0
[ 59.226435] ? rcu_read_lock_sched_held+0xaf/0xe0
[ 59.227512] ? trace_event_raw_event_rcu_quiescent_state_report+0x360/0x360
[ 59.228851] process_one_work+0x98f/0x1760
[ 59.229684] ? pwq_dec_nr_in_flight+0x330/0x330
[ 59.230656] worker_thread+0x91/0xc40
[ 59.231587] ? process_one_work+0x1760/0x1760
[ 59.232451] kthread+0x34a/0x410
[ 59.233104] ? __kthread_queue_delayed_work+0x240/0x240
[ 59.234141] ret_from_fork+0x3a/0x50
[ 59.234982]
[ 59.235371] Allocated by task 187:
[ 59.236189] save_stack+0x19/0x80
[ 59.236853] __kasan_kmalloc.constprop.5+0xc1/0xd0
[ 59.237822] kmem_cache_alloc_trace+0x14c/0x380
[ 59.238769] __nsim_dev_port_add+0xaf/0x5c0
[ 59.239627] nsim_dev_probe+0x4fc/0x1140
[ 59.240550] really_probe+0x264/0xc00
[ 59.241418] driver_probe_device+0x208/0x2e0
[ 59.242255] __device_attach_driver+0x215/0x2d0
[ 59.243150] bus_for_each_drv+0x154/0x1d0
[ 59.243944] __device_attach+0x1ba/0x2b0
[ 59.244923] bus_probe_device+0x1dd/0x290
[ 59.245805] device_add+0xbac/0x1550
[ 59.246528] new_device_store+0x1f4/0x400
[ 59.247306] bus_attr_store+0x7b/0xa0
[ 59.248047] sysfs_kf_write+0x10f/0x170
[ 59.248941] kernfs_fop_write+0x283/0x430
[ 59.249843] __vfs_write+0x81/0x100
[ 59.250546] vfs_write+0x1ce/0x510
[ 59.251190] ksys_write+0x104/0x200
[ 59.251873] do_syscall_64+0xa4/0x4e0
[ 59.252642] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 59.253837]
[ 59.254203] Freed by task 187:
[ 59.254811] save_stack+0x19/0x80
[ 59.255463] __kasan_slab_free+0x125/0x170
[ 59.256265] kfree+0x100/0x440
[ 59.256870] nsim_dev_remove+0x98/0x100
[ 59.257651] nsim_bus_remove+0x16/0x20
[ 59.258382] device_release_driver_internal+0x20b/0x4d0
[ 59.259588] bus_remove_device+0x2e9/0x5a0
[ 59.260551] device_del+0x410/0xad0
[ 59.263777] device_unregister+0x26/0xc0
[ 59.264616] nsim_bus_dev_del+0x16/0x60
[ 59.265381] del_device_store+0x2d6/0x3c0
[ 59.266295] bus_attr_store+0x7b/0xa0
[ 59.267192] sysfs_kf_write+0x10f/0x170
[ 59.267960] kernfs_fop_write+0x283/0x430
[ 59.268800] __vfs_write+0x81/0x100
[ 59.269551] vfs_write+0x1ce/0x510
[ 59.270252] ksys_write+0x104/0x200
[ 59.270910] do_syscall_64+0xa4/0x4e0
[ 59.271680] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 59.272812]
[ 59.273211] The buggy address belongs to the object at ffff8883cbdd3200
[ 59.273211] which belongs to the cache kmalloc-512 of size 512
[ 59.275838] The buggy address is located 408 bytes inside of
[ 59.275838] 512-byte region [ffff8883cbdd3200, ffff8883cbdd3400)
[ 59.278151] The buggy address belongs to the page:
[ 59.279215] page:ffffea000f2f7400 refcount:1 mapcount:0 mapping:ffff8883ecc0ce00 index:0x0 compound_mapcount: 0
[ 59.281449] flags: 0x200000000010200(slab|head)
[ 59.282356] raw: 0200000000010200ffffea000f2f3a08ffffea000f2fd608ffff8883ecc0ce00
[ 59.283949] raw: 0000000000000000000000000015001500000001ffffffff0000000000000000
[ 59.285608] page dumped because: kasan: bad access detected
[ 59.286981]
[ 59.287337] Memory state around the buggy address:
[ 59.288310] ffff8883cbdd3280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.289763] ffff8883cbdd3300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.291452] >ffff8883cbdd3380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.292945] ^
[ 59.293815] ffff8883cbdd3400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 59.295220] ffff8883cbdd3480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 59.296872] ==================================================================
Fixes: da58f90f11f5 ("netdevsim: Add devlink-trap support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: syzbot+9ed8f68ab30761f3678e@syzkaller.appspotmail.com Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 31 Oct 2019 12:13:46 +0000 (12:13 +0000)]
rxrpc: Fix handling of last subpacket of jumbo packet
When rxrpc_recvmsg_data() sets the return value to 1 because it's drained
all the data for the last packet, it checks the last-packet flag on the
whole packet - but this is wrong, since the last-packet flag is only set on
the final subpacket of the last jumbo packet. This means that a call that
receives its last packet in a jumbo packet won't complete properly.
Fix this by having rxrpc_locate_data() determine the last-packet state of
the subpacket it's looking at and passing that back to the caller rather
than having the caller look in the packet header. The caller then needs to
cache this in the rxrpc_call struct as rxrpc_locate_data() isn't then
called again for this packet.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Fixes: e2de6c404898 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 31 Oct 2019 18:43:36 +0000 (11:43 -0700)]
Merge tag 'mac80211-for-net-2019-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just two fixes:
* HT operation is not allowed on channel 14 (Japan only)
* netlink policy for nexthop attribute was wrong
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Felipe Balbi [Thu, 31 Oct 2019 09:07:13 +0000 (11:07 +0200)]
usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
When disabling an endpoint which has cancelled requests, we should
make sure to giveback requests that are currently pending in the
cancelled list, otherwise we may fall into a situation where command
completion interrupt fires after endpoint has been disabled, therefore
causing a splat.
We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish(). IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.
Heiko Carstens [Mon, 28 Oct 2019 10:03:27 +0000 (11:03 +0100)]
s390/idle: fix cpu idle time calculation
The idle time reported in /proc/stat sometimes incorrectly contains
huge values on s390. This is caused by a bug in arch_cpu_idle_time().
The kernel tries to figure out when a different cpu entered idle by
accessing its per-cpu data structure. There is an ordering problem: if
the remote cpu has an idle_enter value which is not zero, and an
idle_exit value which is zero, it is assumed it is idle since
"now". The "now" timestamp however is taken before the idle_enter
value is read.
Which in turn means that "now" can be smaller than idle_enter of the
remote cpu. Unconditionally subtracting idle_enter from "now" can thus
lead to a negative value (aka large unsigned value).
Fix this by moving the get_tod_clock() invocation out of the
loop. While at it also make the code a bit more readable.
A similar bug also exists for show_idle_time(). Fix this is as well.
unwind_for_each_frame stops after the first frame if regs->gprs[15] <=
sp.
The reason is that in case regs are specified, the first frame should be
regs->psw.addr and the second frame should be sp->gprs[8]. However,
currently the second frame is regs->gprs[15], which confuses
outside_of_stack().
Fix by introducing a flag to distinguish this special case from
unwinding the interrupt handler, for which the current behavior is
appropriate.
Paolo Bonzini [Sun, 27 Oct 2019 15:23:23 +0000 (16:23 +0100)]
KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active
VMX already does so if the host has SMEP, in order to support the combination of
CR0.WP=1 and CR4.SMEP=1. However, it is perfectly safe to always do so, and in
fact VMX already ends up running with EFER.NXE=1 on old processors that lack the
"load EFER" controls, because it may help avoiding a slow MSR write. Removing
all the conditionals simplifies the code.
SVM does not have similar code, but it should since recent AMD processors do
support SMEP. So this patch also makes the code for the two vendors more similar
while fixing NPT=0, CR0.WP=1 and CR4.SMEP=1 on AMD processors.
Cc: stable@vger.kernel.org Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Fri, 25 Oct 2019 11:34:58 +0000 (13:34 +0200)]
kvm: call kvm_arch_destroy_vm if vm creation fails
In kvm_create_vm(), if we've successfully called kvm_arch_init_vm(), but
then fail later in the function, we need to call kvm_arch_destroy_vm()
so that it can do any necessary cleanup (like freeing memory).
Fixes: 44a95dae1d229a ("KVM: x86: Detect and Initialize AVIC support") Signed-off-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Junaid Shahid <junaids@google.com>
[Remove dependency on "kvm: Don't clear reference count on
kvm_create_vm() error path" which was not committed. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
efi/efi_test: Lock down /dev/efi_test and require CAP_SYS_ADMIN
The driver exposes EFI runtime services to user-space through an IOCTL
interface, calling the EFI services function pointers directly without
using the efivar API.
Disallow access to the /dev/efi_test character device when the kernel is
locked down to prevent arbitrary user-space to call EFI runtime services.
Also require CAP_SYS_ADMIN to open the chardev to prevent unprivileged
users to call the EFI runtime services, instead of just relying on the
chardev file mode bits for this.
The main user of this driver is the fwts [0] tool that already checks if
the effective user ID is 0 and fails otherwise. So this change shouldn't
cause any regression to this tool.
Kairui Song [Tue, 29 Oct 2019 17:37:54 +0000 (18:37 +0100)]
x86, efi: Never relocate kernel below lowest acceptable address
Currently, kernel fails to boot on some HyperV VMs when using EFI.
And it's a potential issue on all x86 platforms.
It's caused by broken kernel relocation on EFI systems, when below three
conditions are met:
1. Kernel image is not loaded to the default address (LOAD_PHYSICAL_ADDR)
by the loader.
2. There isn't enough room to contain the kernel, starting from the
default load address (eg. something else occupied part the region).
3. In the memmap provided by EFI firmware, there is a memory region
starts below LOAD_PHYSICAL_ADDR, and suitable for containing the
kernel.
EFI stub will perform a kernel relocation when condition 1 is met. But
due to condition 2, EFI stub can't relocate kernel to the preferred
address, so it fallback to ask EFI firmware to alloc lowest usable memory
region, got the low region mentioned in condition 3, and relocated
kernel there.
It's incorrect to relocate the kernel below LOAD_PHYSICAL_ADDR. This
is the lowest acceptable kernel relocation address.
The first thing goes wrong is in arch/x86/boot/compressed/head_64.S.
Kernel decompression will force use LOAD_PHYSICAL_ADDR as the output
address if kernel is located below it. Then the relocation before
decompression, which move kernel to the end of the decompression buffer,
will overwrite other memory region, as there is no enough memory there.
To fix it, just don't let EFI stub relocate the kernel to any address
lower than lowest acceptable address.
[ ardb: introduce efi_low_alloc_above() to reduce the scope of the change ]
Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191029173755.27149-6-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ard Biesheuvel [Tue, 29 Oct 2019 17:37:53 +0000 (18:37 +0100)]
efi: libstub/arm: Account for firmware reserved memory at the base of RAM
The EFI stubloader for ARM starts out by allocating a 32 MB window
at the base of RAM, in order to ensure that the decompressor (which
blindly copies the uncompressed kernel into that window) does not
overwrite other allocations that are made while running in the context
of the EFI firmware.
In some cases, (e.g., U-Boot running on the Raspberry Pi 2), this is
causing boot failures because this initial allocation conflicts with
a page of reserved memory at the base of RAM that contains the SMP spin
tables and other pieces of firmware data and which was put there by
the bootloader under the assumption that the TEXT_OFFSET window right
below the kernel is only used partially during early boot, and will be
left alone once the memory reservations are processed and taken into
account.
So let's permit reserved memory regions to exist in the region starting
at the base of RAM, and ending at TEXT_OFFSET - 5 * PAGE_SIZE, which is
the window below the kernel that is not touched by the early boot code.
efi/random: Treat EFI_RNG_PROTOCOL output as bootloader randomness
Commit 428826f5358c ("fdt: add support for rng-seed") introduced
add_bootloader_randomness(), permitting randomness provided by the
bootloader or firmware to be credited as entropy. However, the fact
that the UEFI support code was already wired into the RNG subsystem
via a call to add_device_randomness() was overlooked, and so it was
not converted at the same time.
Note that this UEFI (v2.4 or newer) feature is currently only
implemented for EFI stub booting on ARM, and further note that
CONFIG_RANDOM_TRUST_BOOTLOADER must be enabled, and this should be
done only if there indeed is sufficient trust in the bootloader
_and_ its source of randomness.
Jerry Snitselaar [Tue, 29 Oct 2019 17:37:51 +0000 (18:37 +0100)]
efi/tpm: Return -EINVAL when determining tpm final events log size fails
Currently nothing checks the return value of efi_tpm_eventlog_init(),
but in case that changes in the future make sure an error is
returned when it fails to determine the tpm final events log
size.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: e658c82be556 ("efi/tpm: Only set 'efi_tpm_final_log_size' after ...") Link: https://lkml.kernel.org/r/20191029173755.27149-3-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Narendra K [Tue, 29 Oct 2019 17:37:50 +0000 (18:37 +0100)]
efi: Make CONFIG_EFI_RCI2_TABLE selectable on x86 only
For the EFI_RCI2_TABLE Kconfig option, 'make oldconfig' asks the user
for input on platforms where the option may not be applicable. This patch
modifies the Kconfig option to ask the user for input only when CONFIG_X86
or CONFIG_COMPILE_TEST is set to y.
Haiyang Zhang [Wed, 30 Oct 2019 15:32:13 +0000 (15:32 +0000)]
hv_netvsc: Fix error handling in netvsc_attach()
If rndis_filter_open() fails, we need to remove the rndis device created
in earlier steps, before returning an error code. Otherwise, the retry of
netvsc_attach() from its callers will fail and hang.
Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Wed, 30 Oct 2019 15:32:11 +0000 (15:32 +0000)]
hv_netvsc: Fix error handling in netvsc_set_features()
When an error is returned by rndis_filter_set_offload_params(), we should
still assign the unaffected features to ndev->features. Otherwise, these
features will be missing.
Fixes: d6792a5a0747 ("hv_netvsc: Add handler for LRO setting change") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vishal Kulkarni [Wed, 30 Oct 2019 14:47:57 +0000 (20:17 +0530)]
cxgb4: fix panic when attaching to ULD fail
Release resources when attaching to ULD fail. Otherwise, data
mismatch is seen between LLD and ULD later on, which lead to
kernel panic when accessing resources that should not even
exist in the first place.
Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 10890 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: e68b6e50fa35 ("udp: enable busy polling for all sockets") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Wed, 30 Oct 2019 21:42:57 +0000 (22:42 +0100)]
ALSA: timer: Fix mutex deadlock at releasing card
When a card is disconnected while in use, the system waits until all
opened files are closed then releases the card. This is done via
put_device() of the card device in each device release code.
The recently reported mutex deadlock bug happens in this code path;
snd_timer_close() for the timer device deals with the global
register_mutex and it calls put_device() there. When this timer
device is the last one, the card gets freed and it eventually calls
snd_timer_free(), which has again the protection with the global
register_mutex -- boom.
Basically put_device() call itself is race-free, so a relative simple
workaround is to move this put_device() call out of the mutex. For
achieving that, in this patch, snd_timer_close_locked() got a new
argument to store the card device pointer in return, and each caller
invokes put_device() with the returned object after the mutex unlock.
Jens Axboe [Wed, 30 Oct 2019 19:53:09 +0000 (13:53 -0600)]
io_uring: ensure we clear io_kiocb->result before each issue
We use io_kiocb->result == -EAGAIN as a way to know if we need to
re-submit a polled request, as -EAGAIN reporting happens out-of-line
for IO submission failures. This field is cleared when we originally
allocate the request, but it isn't reset when we retry the submission
from async context. This can cause issues where we think something
needs a re-issue, but we're really just reading stale data.
Reset ->result whenever we re-prep a request for polled submission.
Cc: stable@vger.kernel.org Fixes: 9e645e1105ca ("io_uring: add support for sqe links") Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sven Schnelle [Wed, 30 Oct 2019 08:17:18 +0000 (09:17 +0100)]
parisc: fix frame pointer in ftrace_regs_caller()
The current code in ftrace_regs_caller() doesn't assign
%r3 to contain the address of the current frame. This
is hidden if the kernel is compiled with FRAME_POINTER,
but without it just crashes because it tries to dereference
an arbitrary address. Fix this by always setting %r3 to the
current stack frame.
Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 30 Oct 2019 09:04:22 +0000 (11:04 +0200)]
mlxsw: core: Unpublish devlink parameters during reload
The devlink parameter "acl_region_rehash_interval" is a runtime
parameter whose value is stored in a dynamically allocated memory. While
reloading the driver, this memory is freed and then allocated again. A
use-after-free might happen if during this time frame someone tries to
retrieve its value.
Since commit 070c63f20f6c ("net: devlink: allow to change namespaces
during reload") the use-after-free can be reliably triggered when
reloading the driver into a namespace, as after freeing the memory (via
reload_down() callback) all the parameters are notified.
Fix this by unpublishing and then re-publishing the parameters during
reload.
Fixes: 98bbf70c1c41 ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param") Fixes: 7c62cfb8c574 ("devlink: publish params only after driver init is done") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qed: Optimize execution time for nvm attributes configuration.
Current implementation for nvm_attr configuration instructs the management
FW to load/unload the nvm-cfg image for each user-provided attribute in
the input file. This consumes lot of cycles even for few tens of
attributes.
This patch updates the implementation to perform load/commit of the config
for every 50 attributes. After loading the nvm-image, MFW expects that
config should be committed in a predefined timer value (5 sec), hence it's
not possible to write large number of attributes in a single load/commit
window. Hence performing the commits in chunks.
Fixes: 0dabbe1bb3a4 ("qed: Add driver API for flashing the config attributes.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Wed, 30 Oct 2019 08:15:12 +0000 (08:15 +0000)]
vxlan: fix unexpected failure of vxlan_changelink()
After commit 0ce1822c2a08 ("vxlan: add adjacent link to limit depth
level"), vxlan_changelink() could fail because of
netdev_adjacent_change_prepare().
netdev_adjacent_change_prepare() returns -EEXIST when old lower device
and new lower device are same.
(old lower device is "dst->remote_dev" and new lower device is "lowerdev")
So, before calling it, lowerdev should be NULL if these devices are same.
Test command1:
ip link add dummy0 type dummy
ip link add vxlan0 type vxlan dev dummy0 dstport 4789 vni 1
ip link set vxlan0 type vxlan ttl 5
RTNETLINK answers: File exists
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Trond Myklebust [Thu, 17 Oct 2019 13:02:21 +0000 (09:02 -0400)]
SUNRPC: Destroy the back channel when we destroy the host transport
When we're destroying the host transport mechanism, we should ensure
that we do not leak memory by failing to release any back channel
slots that might still exist.
Reported-by: Neil Brown <neilb@suse.de> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Trond Myklebust [Thu, 17 Oct 2019 13:02:20 +0000 (09:02 -0400)]
SUNRPC: The RDMA back channel mustn't disappear while requests are outstanding
If there are RDMA back channel requests being processed by the
server threads, then we should hold a reference to the transport
to ensure it doesn't get freed from underneath us.
Reported-by: Neil Brown <neilb@suse.de> Fixes: 63cae47005af ("xprtrdma: Handle incoming backward direction RPC calls") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Trond Myklebust [Thu, 17 Oct 2019 13:02:19 +0000 (09:02 -0400)]
SUNRPC: The TCP back channel mustn't disappear while requests are outstanding
If there are TCP back channel requests being processed by the
server threads, then we should hold a reference to the transport
to ensure it doesn't get freed from underneath us.
Reported-by: Neil Brown <neilb@suse.de> Fixes: 2ea24497a1b3 ("SUNRPC: RPC callbacks may be split across several..") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Nick Desaulniers [Wed, 16 Oct 2019 23:02:09 +0000 (16:02 -0700)]
drm/amdgpu: enable -msse2 for GCC 7.1+ users
A final attempt at enabling sse2 for GCC users.
Orininally attempted in:
commit 10117450735c ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines")
Reverted due to "reported instability" in:
commit 193392ed9f69 ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"")
Re-added just for Clang in:
commit 0f0727d971f6 ("drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines")
The original report didn't have enough information to know if the GPF
was due to misalignment, but I suspect that it was. (The missing
information was the disassembly of the function at the bottom of the
trace, to see if the instruction pointer pointed to an instruction with
16B alignment memory operand requirements. The stack trace does show
the stack was only 8B but not 16B aligned though, which makes this a
strong possibility).
Now that the stack misalignment issue has been fixed for users of GCC
7.1+, reattempt adding -msse2. This matches Clang.
It will likely never be safe to enable this for pre-GCC 7.1 AND use a
16B aligned stack in these translation units.
This is only a functional change for GCC 7.1+ users, and should be boot
tested.
Nick Desaulniers [Wed, 16 Oct 2019 23:02:08 +0000 (16:02 -0700)]
drm/amdgpu: fix stack alignment ABI mismatch for GCC 7.1+
GCC earlier than 7.1 errors when compiling code that makes use of
`double`s and sets a stack alignment outside of the range of [2^4-2^12]:
$ cat foo.c
double foo(double x, double y) {
return x + y;
}
$ gcc-4.9 -mpreferred-stack-boundary=3 foo.c
error: -mpreferred-stack-boundary=3 is not between 4 and 12
This is likely why the AMDGPU driver was ever compiled with a different
stack alignment (and thus different ABI) than the rest of the x86
kernel. The kernel uses 8B stack alignment, while the driver was using
16B stack alignment in a few places.
Since GCC 7.1+ doesn't error, fix the ABI mismatch for users of newer
versions of GCC.
There was discussion about whether to mark the driver broken or not for
users of GCC earlier than 7.1, but since the driver currently is
working, don't explicitly break the driver for them here.
Relying on differing stack alignment is unspecified behavior, and
brittle, and may break in the future.
This patch is no functional change for GCC users earlier than 7.1. It's
been compile tested on GCC 4.9 and 8.3 to check the correct flags. It
should be boot tested when built with GCC 7.1+.
-mincoming-stack-boundary= or -mstackrealign may help keep this code
building for pre-GCC 7.1 users.
The version check for GCC is broken into two conditionals, both because
cc-ifversion is currently GCC specific, and it simplifies a subsequent
patch.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>