The idea is to let kfd init and resume function share the same code path
as much as possible, rather than to have two copies of almost identical
code. That way improves the code readability and maintainability.
Dave Airlie [Thu, 12 Oct 2017 23:52:01 +0000 (00:52 +0100)]
drm/plane: drop num_overlay_planes (v3)
In order to implement plane leasing we need to count things,
just make the code consistent with the counting code currently
used for counting crtcs/encoders/connectors and drop the need
for num_overlay_planes.
v2: don't forget to assign plane_ptr. (keithp)
v3: use correct bounds check, found by igt.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 17 Oct 2017 00:13:47 +0000 (10:13 +1000)]
Merge tag 'tilcdc-4.15' of https://github.com/jsarha/linux into drm-next
tilcdc changes for v4.15
* tag 'tilcdc-4.15' of https://github.com/jsarha/linux:
drm/tilcdc: Remove redundant OF_DETACHED flag setting
drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode()
drm/tilcdc: Use tilcdc_crtc_shutdown() in tilcdc_crtc_destroy()
drm/tilcdc: Remove WARN_ON(!drm_modeset_is_locked(&crtc->mutex)) checks
drm/tilcdc: Turn raster off in crtc reset, if it was on in the HW
drm/tilcdc: switch to drm_*{get,put} helpers
drm/tilcdc: tilcdc_tfp410: make of_device_ids const.
drm/tilcdc: tilcdc_panel: make of_device_ids const.
Dave Airlie [Tue, 17 Oct 2017 00:10:17 +0000 (10:10 +1000)]
Merge tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Quick 4.15 misc pull for the build fix:
Cross-subsystem Changes:
- piles an piles of misc/trivial patches all over, some more from
outreachy applicants
Core Changes:
- build fix for the bridge/of cleanup (Maarten)
- fix vblank count in arm_vblank_event (Ville)
- some kerneldoc typo fixes from Thierry
Driver Changes:
- vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt)
- sun4i: small cleanups and improved code comments all over (Chen-Yu
Tsai)
* tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc: (21 commits)
drm/via: use ARRAY_SIZE
drm/gma500: use ARRAY_SIZE
drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function
drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits
drm/sun4i: backend: Add comment explaining why registers are cleared
drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory
drm/sun4i: backend: Create regmap after access is possible
drm/sun4i: don't add components that are already in the queue
drm/vc4: Fix pitch setup for T-format scanout.
drm/vc4: Move the DSI clock divider workaround closer to the clock call.
drm: Replace kzalloc with kcalloc
drm/tinydrm: Remove explicit .best_encoder assignment
drm/tinydrm: Replace dev_error with DRM_DEV_ERROR
drm/drm_of: Move drm_of_panel_bridge_remove_function into header.
drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()
drm/atomic-helper: Fix typo
drm: Add missing __user annotation to drm_syncobj_array_find()
drm/rockchip: add PINCTRL dependency for LVDS
drm/kirin: Checking for IS_ERR() instead of NULL
driver:gpu: return -ENOMEM on allocation failure.
...
Jérémy Lefaure [Mon, 16 Oct 2017 02:33:56 +0000 (22:33 -0400)]
drm/via: use ARRAY_SIZE
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Jérémy Lefaure [Mon, 16 Oct 2017 02:30:46 +0000 (22:30 -0400)]
drm/gma500: use ARRAY_SIZE
Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is useless to re-invent it.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Chen-Yu Tsai [Sat, 14 Oct 2017 04:02:52 +0000 (12:02 +0800)]
drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function
Initially we configured the PAD_CTRL1 register at probe/bind time.
However it seems the HDMI controller will modify some of the bits
in this register by itself. On the A10 it is particularly annoying
as it toggles the output invert bits, which inverts the colors on
the display output.
The U-boot driver this driver is based on sets this register twice,
though it seems it's only needed for actual display output. Hence
we move it to the mode_set function.
While debugging inverted color from the HDMI output on the A10, I
found that the lowest 3 bits were set. These were cleared on A20
boards that had normal display output. By manually toggling these
bits the mapping of the color components to these bits was found.
While these are not used anywhere, it would be nice to document
them somewhere.
Chen-Yu Tsai [Sat, 14 Oct 2017 04:02:49 +0000 (12:02 +0800)]
drm/sun4i: backend: Add comment explaining why registers are cleared
Many of the backend's layer configuration registers have undefined
default values. This poses a risk as we use regmap_update_bits in
some places, and don't overwrite the whole register.
At probe/bind time we explicitly clear all the control registers
by writing 0 to them. This patch adds a more detailed explanation
on why we're doing this.
Chen-Yu Tsai [Sat, 14 Oct 2017 04:02:48 +0000 (12:02 +0800)]
drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory
Commit 4636ce93d5b2 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()")
adds a new helper, which covers fetching a drm_framebuffer's GEM object
and calculating the buffer address for a given plane.
This patch uses this helper to replace our own open coded version of the
same function.
Chen-Yu Tsai [Sat, 14 Oct 2017 04:02:46 +0000 (12:02 +0800)]
drm/sun4i: don't add components that are already in the queue
Even though the components framework can handle duplicate entries,
the extra entries cause a lot more debug messages to be generated,
which would be confusing to developers not familiar with our driver
and the framework in general.
Instead, we can scan the relatively small queue and check if the
component to be added is already queued up. Since the display
pipelines are symmetrical (not considering the third display
pipeline on the A80), and we add components level by level, when
we get to the second instance at the same level, any shared downstream
components would already be in the queue.
Eric Anholt [Wed, 27 Sep 2017 19:32:09 +0000 (12:32 -0700)]
drm/vc4: Fix pitch setup for T-format scanout.
The documentation said to use src_w here, and I didn't consider that
we actually needed to be using pitch somewhere in our setup. Fixes
scanout on my DSI panel when X11 does initial setup with 1920x1080
HDMI and 800x480 DSI both at 0,0 of the same framebuffer.
Dave Airlie [Fri, 13 Oct 2017 23:39:56 +0000 (09:39 +1000)]
Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next
Most notable addition this time is the support for the GPU performance
counters by Christian. This has been in the making for some time and it
has matured a lot. Since this is adding UAPI, the corresponding WIP
userspace can be found at [1] mesa/libdrm repos. I expect that
Christian sends out the final userspace patches for this once you have
pulled the kernel bits.
Philipp optimized the probe path, so etnaviv gets out of the way for
systems that want to boot real quick.
I've done mostly cleanups, disentangling etnaviv from the IOMMU API,
with some MMUv1 optimizations on the way.
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (36 commits)
drm/etnaviv: remove unnecessary clock stabilization delay
drm/etnaviv: reduce reset delay
drm/etnaviv: remove unused function etnaviv_gem_new
drm/etnaviv: remove stale comment
drm/etnaviv: submit supports performance monitor requests
drm/etnaviv: enable debug registers on demand
drm/etnaviv: need to disable clock gating when doing profiling
drm/etnaviv: add MC perf domain
drm/etnaviv: add TX perf domain
drm/etnaviv: add RA perf domain
drm/etnaviv: add SE perf domain
drm/etnaviv: add PA perf domain
drm/etnaviv: add SH perf domain
drm/etnaviv: add PE perf domain
drm/etnaviv: add HI perf domain
drm/etnaviv: use 'sync points' for performance monitor requests
drm/etnaviv: clear alloced event
drm/etnaviv: add 'sync point' support
drm/etnaviv: add performance monitor request processing
drm/etnaviv: copy pmrs from userspace
...
Since the driver is relying on the atomic helpers, remove the explicit
.best_encoder assignment and let the core call
drm_atomic_helper_best_encoder().
drm/drm_of: Move drm_of_panel_bridge_remove_function into header.
Core drm shouldn't depend on anything in drm-kms-helper, or the drm
module will fail to load.
insmod drm fails with
[ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0)
which is defined in drm_kms_helper.ko
This call was added by commit c70087e8f16f ("drm/drm_of: add
drm_of_panel_bridge_remove function"), and the fix is defining it in the
drm_of.h header, to break the circular dependency.
Thierry Reding [Thu, 12 Oct 2017 14:08:57 +0000 (16:08 +0200)]
drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()
Fix up this reference so that the proper link is generated in the
documentation and so that people don't go chasing after the wrong
function for an embarrassingly long time.
Stephen Boyd [Fri, 13 Oct 2017 07:47:55 +0000 (00:47 -0700)]
drm/tilcdc: Remove redundant OF_DETACHED flag setting
of_fdt_unflatten_tree() already sets the flag on this node to
OF_DETACHED, because of_fdt_unflatten_tree() calls
__unflatten_device_tree() with the detached bool set to true.
Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Jyri Sarha <jsarha@ti.com>
Jyri Sarha [Thu, 12 Oct 2017 09:19:46 +0000 (12:19 +0300)]
drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode()
We need the total frame refresh time to check if we are too close to
vertical sync when updating the two framebuffer DMA registers and risk
a collision. This new method is more accurate that the previous that
based on mode's vrefresh value, which itself is inaccurate or may not
even be initialized.
Reported-by: Kevin Hao <kexin.hao@windriver.com> Fixes: 11abbc9f39e0 ("drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Dave Airlie [Fri, 13 Oct 2017 07:33:07 +0000 (17:33 +1000)]
Merge tag 'omapdrm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for 4.15
* OMAP4 HDMI CEC support
* tag 'omapdrm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
omapdrm: omapdss_hdmi_ops: add lost_hotplug op
omapdrm: hdmi4: hook up the HDMI CEC support
omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support
omapdrm: hdmi4: refcount hdmi_power_on/off_core
omapdrm: hdmi4: move hdmi4_core_powerdown_disable to hdmi_power_on_core()
omapdrm: hdmi4: prepare irq handling for HDMI CEC support
omapdrm: hdmi4: make low-level functions available
omapdrm: hdmi.h: extend hdmi_core_data with CEC fields
omapdrm: encoder-tpd12s015: keep ls_oe_gpio high
Core Changes:
- less surprising atomic iterators (Maarten), fixes an oops introduced
in drm-next
- better gem/fb helper docs (Noralf)
- fix dma-buf rcu races (Christian König)
Driver Changes:
- adv7511: CEC support (Hans Verkuil)
- sun4i update from Chen-Yu to improve hdmi and A31 support
- sii8620: add remote control support (Maceiej Purski)
Note that this contains a topic pull from regmap, needed by the sun4i
changes. Mark Brown sent that out for pulling into drm-misc.
* tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc: (29 commits)
drm/dp: WARN about invalid/unknown link rates and bw codes
drm/msm/mdp5: remove less than 0 comparison for unsigned value
drm/bridge/sii8620: add remote control support
drm/sun4i: hdmi: Add support for A31's HDMI controller
drm/sun4i: hdmi: Add A31 specific DDC register definitions
drm/sun4i: hdmi: Add support for controller hardware variants
dt-bindings: display: sun4i: Add binding for A31 HDMI controller
drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent
drm/sun4i: hdmi: create a regmap for later use
drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
drm/sun4i: tcon: Add support for demuxing TCON output on A31
drm/sun4i: tcon: Add variant callback for TCON output muxing
drm/bridge/synopsys: dsi :remove is_panel_bridge
drm/vc4: remove bridge from driver internal structure
drm/stm: ltdc: remove bridge from driver internal structure
drm/drm_of: add drm_of_panel_bridge_remove function
drm/bridge: make drm_panel_bridge_remove more robust
dma-fence: fix dma_fence_get_rcu_safe v2
dma-buf: make reservation_object_copy_fences rcu save
drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()
...
Arnd Bergmann [Thu, 5 Oct 2017 12:09:39 +0000 (14:09 +0200)]
drm/rockchip: add PINCTRL dependency for LVDS
The new driver fails to build when CONFIG_PINCTRL is disabled:
drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_grf_config':
drivers/gpu/drm/rockchip/rockchip_lvds.c:229:39: error: dereferencing pointer to incomplete type 'struct dev_pin_info'
if (lvds->pins && !IS_ERR(lvds->pins->default_state))
There is a risk of overflowing vblank timestamps in 2038 or 2106 if
someone sets the drm_timestamp_monotonic module parameter to zero.
I found no indication of anyone ever setting the parameter, or
complaining about the default being wrong, after it was introduced
as a way to handle backwards-compatibility with linux prior to c61eef726a78 ("drm: add support for monotonic vblank timestamps"),
so it's probably safer to just remove the parameter completely
and only allowing the default behavior.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arnd Bergmann [Wed, 11 Oct 2017 15:20:12 +0000 (17:20 +0200)]
drm: vblank: use ktime_t instead of timeval
The drm vblank handling uses 'timeval' to store timestamps in either
monotonic or wall-clock time base. In either case, it reads the current
time as a ktime_t in get_drm_timestamp() and converts it from there.
This is a bit suspicious, as users of 'timeval' often suffer from
the time_t overflow in y2038. I have gone through this code and
found that it is unlikely to cause problems here:
- The user space ABI does not use time_t or timeval, but uses
'u32' and 'long' as the types. This means at least that rebuilding
user programs against a new libc with 64-bit time_t does not
change the ABI.
- As of commit c61eef726a78 ("drm: add support for monotonic vblank
timestamps") in linux-3.8, the monotonic timestamp is the default
and can only get reverted to wall-clock through a module-parameter.
- With the default monotonic timestamps, there is no problem at all.
- The drm_wait_vblank_ioctl() interface is alway safe on 64-bit
architectures, on 32-bit it might overflow the 'long' timestamps
in 2038 with wall-clock timestamps.
- The event handling uses 'u32' seconds, which overflow in 2106
on both 32-bit and 64-bit machines, when wall-clock timestamps
are used.
- The effect of overflowing either of the two is only temporary
(during the overflow, and is likely to keep working again
afterwards. It is likely the same problem as observing a
'settimeofday()' call, which was the reason for moving to the
monotonic timestamps in the first place.
Overall, this seems good enough, so my patch removes the use of
'timeval' from the vblank handling altogether and uses ktime_t
consistently, except for the part where we copy the data to user
space structures in the existing format.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Ville Syrjälä [Tue, 10 Oct 2017 13:33:22 +0000 (16:33 +0300)]
drm/vblank: Fix flip event vblank count
On machines where the vblank interrupt fires some time after the start
of vblank (or we just manage to race with the vblank interrupt handler)
we will currently stuff a stale vblank counter value into the flip event,
and thus we'll prematurely complete the flip.
Switch over to drm_crtc_accurate_vblank_count() to make sure we have an
up to date counter value, crucially also remember to add the +1 so that
the delayed vblank interrupt won't complete the flip prematurely.
Hans Verkuil [Thu, 17 Aug 2017 13:19:57 +0000 (15:19 +0200)]
omapdrm: omapdss_hdmi_ops: add lost_hotplug op
The CEC framework needs to know when the hotplug detect signal
disappears, since that means the CEC physical address has to be
invalidated (i.e. set to f.f.f.f).
Add a lost_hotplug op that is called when the HPD signal goes away.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Hans Verkuil [Wed, 2 Aug 2017 08:54:04 +0000 (10:54 +0200)]
omapdrm: hdmi4: move hdmi4_core_powerdown_disable to hdmi_power_on_core()
Call hdmi4_core_powerdown_disable() in hdmi_power_on_core() to
power up the HDMI core (needed for CEC). The same call can now be dropped
in hdmi4_configure().
Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Hans Verkuil [Wed, 2 Aug 2017 08:54:02 +0000 (10:54 +0200)]
omapdrm: hdmi4: make low-level functions available
Three low-level functions in hdmi4.c and hdmi4_core.c are
made available for use by the OMAP4 CEC support.
Renamed the prefix to hdmi4 since these are OMAP4 specific.
These function deal with the HDMI core and are needed to
power it up for use with CEC, even when the HPD is low.
Background: even if the HPD is low it should still be possible
to use CEC. Some displays will set the HPD low when they go into standby or
when they switch to another input, but CEC is still available and able
to wake up/change input for such a display.
This is explicitly allowed by the CEC standard.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Hans Verkuil [Wed, 2 Aug 2017 08:54:00 +0000 (10:54 +0200)]
omapdrm: encoder-tpd12s015: keep ls_oe_gpio high
For OMAP4 CEC support the CEC pin should always be on. So keep
ls_oe_gpio high all the time in order to support CEC.
Background: even if the HPD is low it should still be possible
to use CEC. Some displays will set the HPD low when they go into standby or
when they switch to another input, but CEC is still available and able
to wake up/change input for such a display.
This is explicitly allowed by the CEC standard.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Dave Airlie [Thu, 12 Oct 2017 00:20:03 +0000 (10:20 +1000)]
Merge tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
2nd batch of v4.15 features:
- lib/scatterlist updates, use for userptr allocations (Tvrtko)
- Fixed point wrapper cleanup (Mahesh)
- Gen9+ transition watermarks, watermark optimization and fixes (Mahesh)
- Display IPC (Isochronous Priority Control) support (Mahesh)
- GEM workaround fixes (Oscar)
- GVT: PCI config sanitize series (Changbin)
- GVT: Workload submission error handling series (Fred)
- PSR fixes and refactoring (Rodrigo)
- HWSP based optimizations (Chris)
- Private PAT management (Zhi)
- IRQ handling fixes and refactoring (Ville)
- Module parameter refactoring and variable name clash fix (Michal)
- Execlist refactoring, incomplete request unwinding on reset (Chris)
- GuC scheduling improvements (Michal)
- OA updates (Lionel)
- Coffeelake out of alpha support (Rodrigo)
- seqno fixes (Chris)
- Execlist refactoring (Mika)
- DP and DP MST cleanups (Dhinakaran)
- Cannonlake slice/sublice config (Ben)
- Numerous fixes all around (Everyone)
* tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel: (168 commits)
drm/i915: Update DRIVER_DATE to 20170929
drm/i915: Use memset64() to prefill the GTT page
drm/i915: Also discard second CRC on gen8+ platforms.
drm/i915/psr: Set frames before SU entry for psr2
drm/dp: Add defines for latency in sink
drm/i915: Allow optimized platform checks
drm/i915: Avoid using dev_priv->info.gen directly.
i915: Use %pS printk format for direct addresses
drm/i915/execlists: Notify context-out for lost requests
drm/i915/cnl: Add support slice/subslice/eu configs
drm/i915: Compact device info access by a small re-ordering
drm/i915: Add IS_PLATFORM macro
drm/i915/selftests: Try to recover from a wedged GPU during reset tests
drm/i915/huc: Reorganize HuC authentication
drm/i915: Fix default values of some modparams
drm/i915: Extend I915_PARAMS_FOR_EACH with default member value
drm/i915: Make I915_PARAMS_FOR_EACH macro more flexible
drm/i915: Enable scanline read based on frame timestamps
drm/i915/execlists: Microoptimise execlists_cancel_port_request()
drm/i915: Don't rmw PIPESTAT enable bits
...
Jani Nikula [Mon, 9 Oct 2017 09:29:57 +0000 (12:29 +0300)]
drm/dp: WARN about invalid/unknown link rates and bw codes
Falling back to the lowest value is likely the only thing we can do, but
doing it silently seems like a bad thing to do. Catch it early and make
loud noises.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-1-jani.nikula@intel.com
Maciej Purski [Thu, 24 Aug 2017 08:58:07 +0000 (10:58 +0200)]
drm/bridge/sii8620: add remote control support
MHL specification defines Remote Control Protocol(RCP) to
send input events between MHL devices.
The driver now recognizes RCP messages and reacts to them
by reporting key events to input subsystem, allowing
a user to control a device using TV remote control.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:04 +0000 (11:20 +0800)]
drm/sun4i: hdmi: Add support for controller hardware variants
The HDMI controller found in earlier Allwinner SoCs have slight
differences between the A10, A10s, and the A31:
- Need different initial values for the PLL related registers
- Different behavior of the DDC and TMDS clocks
- Different register layout for the DDC portion
- Separate DDC parent clock on the A31
- Explicit reset control
For the A31, the HDMI TMDS clock has a different value offset for
the divider. The HDMI DDC block is different from the one in the
other SoCs. As far as the DDC clock goes, it has no pre-divider,
as it is clocked from a slower parent clock, not the TMDS clock.
The divider offset from the register value is different. And the
clock control register is at a different offset.
A new variant data structure is created to store pointers to the
above functions, structures, and the different initial values.
Another flag notates whether there is a separate DDC parent clock.
If not, the TMDS clock is passed to the DDC clock create function,
as before.
Regmap fields are used to deal with the different register layout
of the DDC block.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:03 +0000 (11:20 +0800)]
dt-bindings: display: sun4i: Add binding for A31 HDMI controller
The HDMI controller in the A31 SoC is slightly different from the
earlier version. In addition to the TMDS clock and DDC controls,
this version now takes a second DDC clock input.
Add a compatible string for it, and add the DDC clock input to the
list of clocks required.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:02 +0000 (11:20 +0800)]
drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent
On SoCs with two display pipelines, it is possible that the two
pipelines are active at the same time, with potentially incompatible
dot clocks.
Let the HDMI encoder's TMDS clock go through all of its parents when
calculating possible clock rates. This allows usage of the second video
PLL as its parent.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:01 +0000 (11:20 +0800)]
drm/sun4i: hdmi: create a regmap for later use
The HDMI driver is written with readl/writel I/O to the registers.
However, to support the A31 variant, which has a different layout
for the DDC registers, it was recommended to use regfields to have
a cleaner implementation. To use regfields, we need to create an
underlying regmap.
This patch only adds the regmap. It does not convert the existing
driver accesses to use regmap.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:00 +0000 (11:20 +0800)]
drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.
Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.
Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:19:58 +0000 (11:19 +0800)]
drm/sun4i: tcon: Add variant callback for TCON output muxing
Different SoCs have different muxing options and values for the TCON
outputs. Instead of stuffing every possibility in sun4i_tcon_set_mux(),
add a callback pointer to sun4i_tcon_quirks that each TCON variant
can use to provide muxing support.
The current muxing options in sun4i_tcon_set_mux() for sun5i-a13 are
moved to a new sun5i-specific callback function.
Since the new callback replaces what the .has_unknown_mux field in
tcon quirks did in the past, the field is removed.
There is no reason to wait for clock stabilization here, as the clock
framework guarantees that PLL clock sources are stable before clk_enable
returns.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Philipp Zabel [Mon, 9 Oct 2017 10:03:30 +0000 (12:03 +0200)]
drm/etnaviv: reduce reset delay
After reset assertion, we only have to wait for the reset signals to
propagate through the GPU before deasserting the reset again. A few
hundred clock cycles should be more than enough. Replace the msleep(1),
which can actually take about 30 ms on i.MX6Q in some configurations,
with an usleep_range of a few microseconds. If the delay was too short,
the FE would not be idle afterwards, and the reset would be retried.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
We increment the minor driver version so userspace can detect perfmon support.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Some performance register are debug register and they need to
be enabled in order to be functional.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
drm/etnaviv: need to disable clock gating when doing profiling
As done by Vivante kernel driver.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Results in less code as the users do not set every struct member to 0/NULL.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
In order to support performance counters in a sane way we need to provide
a method to sync the GPU with the CPU. The GPU can process multpile command
buffers/events per irq. With the help of a 'sync point' we can trigger an event
and stop the GPU/FE immediately. When the CPU is done with is processing it
simply needs to restart the FE and the GPU will process the command stream.
Changes from v1 -> v2:
- process sync point with a work item to keep irq as fast as possible
Changes from v4 -> v5:
- renamed pmrs_* to sync_point_*
- call event_free(..) in sync_point_worker(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Changes from v1 -> v2:
- renamed submit_perfmon_request() to submit_perfmon_validate()
- extended flags validation
- added comment about offset 0
- moved assigment of cmdbuf->nr_pmrs below the copy_from_user of the pmrs.
Changes from v2 -> v3:
- fixed flags validation
Changes v4 -> v5
- pass cmdbuf->exec_state to etnaviv_pm_req_validate(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Sadly we can not read any registers via command stream so we need
to extend the drm_etnaviv_gem_submit struct with performance monitor
requests. Those requests gets process before or after the actual
submitted command stream.
The Vivante kernel driver has a special ioctl to read all perfmon
registers at once and return it.
Changes from v1 -> v2:
- use a 16 bit value for signals
- fix padding issues
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
drm/etnaviv: add infrastructure to query perf counter
Make it possible that userspace can query all performance domains and
its signals. This information is needed to sample those signals via
submit ioctl.
At the moment no performance domain is available.
Changes from v1 -> v2:
- use a 16 bit value for signals
- fix padding issues
- add id member to domain and signal struct
Changes v4 -> v5
- provide for each pipe an own set of pm domains
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
drm/etnaviv: make it possible to allocate multiple events
This makes it possible to allocate multiple events under the event
spinlock. This change is needed to support 'sync'-points.
Changes v2 -> v3:
- wait for the completion of all events
- use 10sec timeout regardless of the number of events
- removed validation if there are enough free events
- fixed return value evaluation of event_alloc(..) in etnaviv_gpu_submit(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Thu, 28 Sep 2017 13:41:21 +0000 (15:41 +0200)]
drm/etnaviv: rework clock initialization
The reset path wants to initialize the clock control register regardless
of the DYNAMIC_FREQUENCY_SCALING feature, so don't call clock update, but
explicitly load the register.
Also disabling of the debug registers is moved into the reset function,
so we always get to the same state after a GPU reset. This means the
clock update function should not touch the bits already set in the clock
control register, but instead only update the scaling bits.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Thu, 7 Sep 2017 15:06:28 +0000 (17:06 +0200)]
drm/etnaviv: remove IOMMU dependency
Using the IOMMU API to manage the internal GPU MMU has been an
historical accident and it keeps getting in the way, as well as
entangling the driver with the inner workings of the IOMMU
subsystem.
Clean this up by removing the usage of iommu_domain, which is the
last piece linking etnaviv to the IOMMU subsystem.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Thu, 7 Sep 2017 15:06:28 +0000 (17:06 +0200)]
drm/etnaviv: mmu: mark local functions static
And clean up the header file a bit.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Lucas Stach [Thu, 7 Sep 2017 14:52:13 +0000 (16:52 +0200)]
drm/etnaviv: mmu: stop using iommu map/unmap functions
This is a preparation to remove the etnaviv dependency on the IOMMU
subsystem by importing the relevant parts of the iommu map/unamp
functions into the driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Lucas Stach [Thu, 7 Sep 2017 13:41:38 +0000 (15:41 +0200)]
drm/etnaviv: iommuv1: remove map_lock
It wasn't protecting anything, as the single word writes used to
set up or tear down a translation are already inherently atomic,
so the spinlock is pure overhead.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Lucas Stach [Thu, 7 Sep 2017 13:56:01 +0000 (15:56 +0200)]
drm/etnaviv: iommuv1: fold pgtable_write into callers
A function doing a single assignment is not really helping the
code flow.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Lucas Stach [Thu, 7 Sep 2017 13:36:57 +0000 (15:36 +0200)]
drm/etnaviv: iommuv1: fold pagetable alloc and free into caller
Those functions are simple enough to fold them into the calling
function. This also fixes a correctness issue, as the alloc/free
functions didn't specifiy the device the memory was allocated for.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Lucas Stach [Thu, 7 Sep 2017 13:27:00 +0000 (15:27 +0200)]
drm/etnaviv: remove iova_to_phys iommu ops
They are not used in any way, so can go away.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Lucas Stach [Thu, 7 Sep 2017 13:22:22 +0000 (15:22 +0200)]
drm/etnaviv: remove iommu fault handler
The handler has never been used, so it's really just dead code.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
drm/drm_of: add drm_of_panel_bridge_remove function
This function is the pendant of drm_of_find_panel_or_bridge()
to remove a previously allocated panel_bridge.
Given a specific port and endpoint it remove the panel bridge.
Since drm_panel_bridge_remove() will check that bridge parameter
is not NULL and is a real drm_panel_bridge and no a simple bridge
it is safe to call it directly.