Thierry Reding [Tue, 15 Oct 2019 12:57:42 +0000 (14:57 +0200)]
drm/tegra: sor: Use DP link training helpers
Make use of the DP link training helpers to implement full and fast link
training. While at it, refactor some of the code and remove various code
sequences that are not necessary.
This helper chooses an appropriate configuration, according to the
bitrate requirements of the video mode and the capabilities of the
DisplayPort sink.
Thierry Reding [Thu, 3 Dec 2015 12:07:43 +0000 (13:07 +0100)]
drm/tegra: dp: Read fast training capability from link
While probing the DisplayPort link, query the fast training capability.
If supported, drivers can use the fast link training sequence instead of
the more involved full link training sequence.
Thierry Reding [Thu, 3 Dec 2015 11:45:45 +0000 (12:45 +0100)]
drm/tegra: dp: Turn link capabilities into booleans
Rather than storing capabilities as flags in an integer, use a separate
boolean per capability. This simplifies the code that checks for these
capabilities.
Thierry Reding [Thu, 27 Jun 2019 10:24:41 +0000 (12:24 +0200)]
drm/tegra: dpaux: Parameterize CMH, DRVZ and DRVI
The CMH, DRVZ and DRVI values vary depending on the SoC generation. Move
them into SoC specific structures so that DT compatible string matching
can be used to select the right parameters and write them to hardware at
the right time.
Thierry Reding [Mon, 24 Jun 2019 11:30:24 +0000 (13:30 +0200)]
drm/tegra: dpaux: Fix crash if VDD supply is absent
In order to properly make the VDD supply optional, all accesses to the
regulator need to be ignored, because the regulator core doesn't treat
NULL special.
Thierry Reding [Mon, 3 Aug 2015 12:08:34 +0000 (14:08 +0200)]
drm/tegra: dpaux: Support monitor hotplugging
The dpaux driver has a quirk built-in that will delay initialization of
the display driver for a short while, trying to detect an eDP panel. The
reason for this quirk is that the panel may not report as connected
until after the display driver has initialized, at which point the fbdev
emulation will have fallen back to 1024x768 as default resolution, which
will likely not be the eDP panel's native resolution.
With upcoming DisplayPort support, the code needs to be able to cope
with hotpluggable monitors as well. Waiting for a panel to show up is no
longer going to work because the monitor may not be attached on boot. If
the output runs in DisplayPort mode, skip waiting for the panel to show
up.
Thierry Reding [Fri, 8 Jun 2018 13:00:05 +0000 (15:00 +0200)]
drm/tegra: gem: Use sg_alloc_table_from_pages()
Instead of manually creating the SG table for a discontiguous buffer,
use the existing sg_alloc_table_from_pages(). Note that this is not safe
to be used with the ARM DMA/IOMMU integration code because that will not
ensure that the whole buffer is mapped contiguously. Depending on the
size of the individual entries the mapping may end up containing holes
to ensure alignment.
However, we only ever use these buffers with explicit IOMMU API usage
and know how to avoid these holes.
Thierry Reding [Mon, 4 Jun 2018 15:36:50 +0000 (17:36 +0200)]
drm/tegra: gem: Rename paddr -> iova
The address can refer to either physical memory or IO virtual memory.
If referring to IO virtual memory, there will always be an associated
physical memory address. Rename this variable to "iova" to clarify in
all cases that this is the IO virtual memory, which in the absence of
an IOMMU is identical to the physical address.
drm/tegra: Inherit device DMA parameters from host1x
The display controllers and VIC don't have any limitations on the
DMA segment size. Inherit the DMA parameters from the parent device,
which also doesn't have any such limitations.
Thierry Reding [Mon, 18 Jun 2018 12:01:51 +0000 (14:01 +0200)]
gpu: host1x: Request channels for clients, not devices
A struct device doesn't carry much information that a channel might be
interested in, but the client very much does. Request channels for the
clients rather than their parent devices and store a pointer to them
in order to have that information available when needed.
It's technically not required to explicitly initialize the fields that
will be zero by default, but it's easier to read these structures if
they are all initialized uniformly.
Commit Fixes: b9f8b09ce256 ("drm/tegra: Setup shared IOMMU domain after
initialization") changed the initialization order of the IOMMU related
bits but didn't update the cleanup path accordingly. This asymmetry can
cause failures during error recovery.
Thierry Reding [Wed, 20 Feb 2019 09:03:46 +0000 (10:03 +0100)]
drm/tegra: sor: Move register programming out of ->init()
The hardware is not guaranteed to be enabled during execution of the
tegra_sor_init() function, which can lead to a crash on some Tegra SoCs.
Fix this by moving all register programming into code that is guaranteed
to only be executed when the hardware is enabled.
Thierry Reding [Mon, 21 Oct 2019 14:34:37 +0000 (16:34 +0200)]
drm/tegra: Move drm_dp_link helpers to Tegra DRM
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. After
all other drivers have been converted not to use these helpers anymore,
move these helpers into the last remaining user: Tegra DRM.
If at some point these helpers are deemed more widely useful, they can
be moved out into the DRM DP helpers again.
Thierry Reding [Mon, 21 Oct 2019 14:34:36 +0000 (16:34 +0200)]
drm/rockchip: Avoid drm_dp_link helpers
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.
Thierry Reding [Mon, 21 Oct 2019 14:34:35 +0000 (16:34 +0200)]
drm/msm: edp: Avoid drm_dp_link helpers
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.
Thierry Reding [Mon, 21 Oct 2019 14:34:33 +0000 (16:34 +0200)]
drm/bridge: tc358767: Avoid drm_dp_link helpers
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.
v4: use bulk DPCD writes if possible (Daniel Vetter)
Thierry Reding [Mon, 21 Oct 2019 14:34:31 +0000 (16:34 +0200)]
drm/dp: Add helper to get post-cursor adjustments
If the transmitter supports pre-emphasis post cursor2 the sink will
request adjustments in a similar way to how it requests adjustments to
the voltage swing and pre-emphasis settings.
Add a helper to extract these adjustments on a per-lane basis from the
DPCD link status.
Thierry Reding [Mon, 21 Oct 2019 14:34:30 +0000 (16:34 +0200)]
drm/dp: Do not busy-loop during link training
Use microsecond sleeps for the clock recovery and channel equalization
delays during link training. The duration of these delays can be from
100 us up to 16 ms. It is rude to busy-loop for that amount of time.
While at it, also convert to standard coding style by putting the
opening braces in a function definition on a new line. Also switch to
using an unsigned int for the AUX read interval to match the data type
of the parameters to usleep_range().
v2: use correct multiplier for training delays (Philipp Zabel)
v3: clarify data type change in commit message
Thierry Reding [Mon, 21 Oct 2019 14:34:26 +0000 (16:34 +0200)]
drm/dp: Remove a gratuituous blank line
It's idiomatic to check the return value of a function call immediately
after the function call, without any blank lines in between, to make it
more obvious that the two lines belong together.
Daniel Vetter [Tue, 22 Oct 2019 15:25:30 +0000 (17:25 +0200)]
drm/todo: Add levels
Should help new people pick suitable tasks.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Sean Paul <sean@poorly.run> Reviewed-by: Sean Paul <sean@poorly.run> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022152530.22038-2-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 22 Oct 2019 16:37:17 +0000 (18:37 +0200)]
drm/doc: Drop misleading comment on drm_mode_config_cleanup
This is not something we'll fix, because failing to clean up stuff (or
doing it in the wrong order) is a driver bug. The offending FIXME goes
all the way back to the original modeset merge.
including a comment blaming drivers on this. Right thing to do is most
likely drm_atomic_helper_shutdown plus making sure that
drm_mode_config_cleanup is not called too early (i.e. not in driver
unload, but only in the final drm_device release callback).
Mihail Atanassov [Mon, 21 Oct 2019 15:01:56 +0000 (15:01 +0000)]
MAINTAINERS: Add Mihail to Komeda DRM driver
I'll be the main point of contact.
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Sean Paul <sean@poorly.run> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021150123.19570-1-mihail.atanassov@arm.com
Wambui Karuga [Sat, 19 Oct 2019 07:18:40 +0000 (10:18 +0300)]
drm: remove unnecessary return variable
Remove unnecessary variable `ret` in drm_dp_atomic_find_vcpi_slots()
only used to hold the function return value and have the function
return the value directly.
Issue found by coccinelle:
@@
local idexpression ret;
expression e;
@@
Kangjie Lu [Fri, 18 Oct 2019 04:41:50 +0000 (23:41 -0500)]
drm/gma500: fix memory disclosures due to uninitialized bytes
"clock" may be copied to "best_clock". Initializing best_clock
is not sufficient. The fix initializes clock as well to avoid
memory disclosures and informaiton leaks.
Kangjie Lu [Fri, 18 Oct 2019 04:29:53 +0000 (23:29 -0500)]
gma/gma500: fix a memory disclosure bug due to uninitialized bytes
`best_clock` is an object that may be sent out. Object `clock`
contains uninitialized bytes that are copied to `best_clock`,
which leads to memory disclosure and information leak.
- drm-next backmerge for HDR DP changes
https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html
Driver Changes:
- Add DC3CO sleep state for Tigerlake (Anshuman)
- Tigerlake BCS engine support engine relative MMIO (Daniele)
- Simplify the Tigerlake LRC register list for !RCS (Daniele)
- Read SAGV block time from PCODE on Tigerlake (James)
- Add 12 missing Tigerlake workarounds (Mika)
- Enable DDI/Port G for Tigerlake (Khaled)
- Avoid hang in tsg,vfe units by keeping l3 clocks ICL+(Mika)
- Fix Bugzilla #111966: Favor last VBT child device (Ville)
- Fix blue/black screen on boot due to broken gamma (Swati)
- Add support of BT.2020 Colorimetry to DP MSA (Gwan-gyeong)
- Attach colorspace property to DP connector (Gwan-gyeong)
- Attach HDR metadata property to DP connector (Gwan-gyeong)
- Base intel_memory_region support prep for local memory (Matt A)
- Introduce Jasper Lake PCH (Matt R)
- Support multiple GPUs in PMU (Tvrtko)
- Fix MST oops due to MSA changes (Ville)
- Refuse modes with hdisplay==4096 on pre-HSW DP (Ville)
- Correct the PCH type in irq postinstall for JSP (Vivek)
- Save Master transcoder in slave's crtc_state for Transcoder Port Sync (Manasi)
- Enable TRANSCODER PORT SYNC for tiled displays across separate ports (Manasi)
- HW state readout for transcoder port sync config (Manasi)
- Enable master-slaves in trans port sync (Manasi)
- In port sync mode disable slaves first then master (Manasi)
- Fix port checks for MST support on gen >= 11 (Lucas)
- Flush submission tasklet before waiting/retiring (Chris)
- Flush tasklet submission before sleeping on i915_request_wait (Chris)
- Object pin reference counting fixes (Chris, Matt A)
- Clear semaphore immediately upon ELSP promotion (Chris)
- Child device size remains unchanged through VBT 229 (Matt R)
- Restore dropped 'interruptible' flag on retiring requests (Chris)
- Treat a busy timeline as 'active' while waiting (Chris)
- Clean up struct_mutex from perf (Chris)
- Update locking around execlists->active (Chris)
- Mark up expected execlist state during reset (Chris)
- Remove cursor use of properties for coordinates (Maarten)
- Only mark incomplete requests as -EIO on cancelling (Chris)
- Add an rcu_barrier option to i915_drop_caches (Chris)
- Replace perf global wakeref tracking with engine-pm (Chris)
- Prevent merging requests with conflicting flags (Chris)
- Allow for CS OA configs to be created lazily (Lionel)
- Implement active wait for noa configurations (Lionel)
- Execute OA configuration from command stream (Lionel)
- Prefer using the pinned_ctx for emitting delays on config (Chris)
- Port C's hotplug interrupt is associated with TC1 bits (Vivek, Matt R)
- Extend program of VSC Header and DB for Colorimetry Format (Gwan-gyeong)
- Fine-tune timeslicing of contexts (Chris)
- Do initial mocs configuration directly (Chris)
- Fix uninitialized variable on PMU error path (Tvrtko)
- Don't disable interrupts independently of the locking (Sebastian)
- Eliminate struct_mutext from GVT (Chris)
- Move perf types to their own header (Lionel)
- Drop list of perf streams (always size 1) (Lionel)
- Store the perf associated engine of a stream (Lionel)
- Make array hw_engine_mask static (Colin)
- Prefer shortest path to RPM/perf/GT instead of dev_priv (Chris, Tvrtko)
- Virtual request submission fixes (Chris)
- Selftest/CI improvements (Chris)
- Fix Kconfig indentation (Krzysztof)
- Give engine->kernel_context distinct timeline lock classes (Chris)
- Fix null pointer deref on selftest error path (Colin)
- Select DPLL's via mask (Matt R)
- Introduce and use intel_atomic_crtc_state_for_each_plane_state (Maarten)
- Use intel_plane_state in prepare and cleanup plane_fb (Maarten)
- Remove begin/finish_crtc_commit (Maarten)
- Move SAGV block time to dev_priv (James)
- Avoid polluting the i915_oa_config with error pointers (Chris)
- Squelch display kerneldoc warnings (Chris)
- Assert tasklet is locked for process_csb() (Chris)
- Switch to using DP_MSA_MISC_* defines (Ville)
- Stop using drm_atomic_helper_check_planes() (Ville)
- Make .modeset_calc_cdclk() mandatory (Ville)
- Use drm_rect_translate_to()/drm_rect_init() (Ville)
- Refactor timestamping constants update (Ville)
- Switch intel_legacy_cursor_update() to intel_ types (Ville)
- Prepare the connector/encoder mask readout for hw vs. uapi state split (Ville)
- Prepare the mode readout for hw vs. uapi state split (Ville)
- Move swizzle_bit under i915_ggtt (Chris)
- Improve microcontrollers documentation (Daniele)
- Move the cursor rotation handling into intel_cursor_check_surface() (Ville)
- Cleanups to pipe code (Ville)
- Shrink eDRAM ways/sets arrays for code size (Ville)
- Cleanups to HDCP2 timeout code (Ville)
- Restore full symmetry in i915_driver_modeset_probe/remove (Janusz)
- Simplify setting of ddi_io_power_domain (Lucas)
- Add pipe id/name to pipe mismatch logs (Lucas)
- Prettify MST debug message (Lucas)
- Extract GT ring management to separate files (Andi)
Andi Shyti [Sun, 20 Oct 2019 18:41:39 +0000 (19:41 +0100)]
drm/i915: Extract GT ring management
Although the ring management is much smaller compared to the other GT
power management functions, continue the theme of extracting it out of
the huge intel_pm.c for maintenance.
Linus Torvalds [Sun, 20 Oct 2019 16:36:57 +0000 (12:36 -0400)]
Merge tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- fix a bashism of setlocalversion
- do not use the too new --sort option of tar
* tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: substituting --sort in archive creation
scripts: setlocalversion: fix a bashism
kbuild: update comment about KBUILD_ALLDIRS
Linus Torvalds [Sun, 20 Oct 2019 10:31:14 +0000 (06:31 -0400)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Prevent a NULL pointer dereference in the X2APIC code in case of a
CPU hotplug failure.
- Prevent boot failures on HP superdome machines by invalidating the
level2 kernel pagetable entries outside of the kernel area as
invalid so BIOS reserved space won't be touched unintentionally.
Also ensure that memory holes are rounded up to the next PMD
boundary correctly.
- Enable X2APIC support on Hyper-V to prevent boot failures.
- Set the paravirt name when running on Hyper-V for consistency
- Move a function under the appropriate ifdef guard to prevent build
warnings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/acpi: Move get_cmdline_acpi_rsdp() under #ifdef guard
x86/hyperv: Set pv_info.name to "Hyper-V"
x86/apic/x2apic: Fix a NULL pointer deref when handling a dying cpu
x86/hyperv: Make vapic support x2apic mode
x86/boot/64: Round memory hole size up to next PMD page
x86/boot/64: Make level2_kernel_pgt pages invalid outside kernel area
Linus Torvalds [Sun, 20 Oct 2019 10:27:54 +0000 (06:27 -0400)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A small set of irq chip driver fixes and updates:
- Update the SIFIVE PLIC interrupt driver to use the fasteoi handler
to address the shortcomings of the existing flow handling which was
prone to lose interrupts
- Use the proper limit for GIC interrupt line numbers
- Add retrigger support for the recently merged Anapurna Labs Fabric
interrupt controller to make it complete
- Enable the ATMEL AIC5 interrupt controller driver on the new
SAM9X60 SoC"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Switch to fasteoi flow
irqchip/gic-v3: Fix GIC_LINE_NR accessor
irqchip/atmel-aic5: Add support for sam9x60 irqchip
irqchip/al-fic: Add support for irq retrigger
Linus Torvalds [Sun, 20 Oct 2019 10:25:12 +0000 (06:25 -0400)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull hrtimer fixlet from Thomas Gleixner:
"A single commit annotating the lockcless access to timer->base with
READ_ONCE() and adding the WRITE_ONCE() counterparts for completeness"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Annotate lockless access to timer->base
The current logic just reapplies the same configuration already stored
into stream->oa_config instead of the newly selected one.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 7831e9a965ea ("drm/i915/perf: Allow dynamic reconfiguration of the OA stream") Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191019214647.27866-1-lionel.g.landwerlin@intel.com
Pull networking fixes from David Miller:
"I was battling a cold after some recent trips, so quite a bit piled up
meanwhile, sorry about that.
Highlights:
1) Fix fd leak in various bpf selftests, from Brian Vazquez.
2) Fix crash in xsk when device doesn't support some methods, from
Magnus Karlsson.
3) Fix various leaks and use-after-free in rxrpc, from David Howells.
4) Fix several SKB leaks due to confusion of who owns an SKB and who
should release it in the llc code. From Eric Biggers.
5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.
6) Jumbo packets don't work after resume on r8169, as the BIOS resets
the chip into non-jumbo mode during suspend. From Heiner Kallweit.
7) Corrupt L2 header during MPLS push, from Davide Caratti.
8) Prevent possible infinite loop in tc_ctl_action, from Eric
Dumazet.
9) Get register bits right in bcmgenet driver, based upon chip
version. From Florian Fainelli.
10) Fix mutex problems in microchip DSA driver, from Marek Vasut.
11) Cure race between route lookup and invalidation in ipv4, from Wei
Wang.
12) Fix performance regression due to false sharing in 'net'
structure, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
net: reorder 'struct net' fields to avoid false sharing
net: dsa: fix switch tree list
net: ethernet: dwmac-sun8i: show message only when switching to promisc
net: aquantia: add an error handling in aq_nic_set_multicast_list
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
macb: propagate errors when getting optional clocks
xen/netback: fix error path of xenvif_connect_data()
net: hns3: fix mis-counting IRQ vector numbers issue
net: usb: lan78xx: Connect PHY before registering MAC
vsock/virtio: discard packets if credit is not respected
vsock/virtio: send a credit update when buffer size is changed
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
net: ensure correct skb->tstamp in various fragmenters
net: bcmgenet: reset 40nm EPHY on energy detect
net: bcmgenet: soft reset 40nm EPHYs before MAC init
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
net: bcmgenet: don't set phydev->link from MAC
net: Update address for MediaTek ethernet driver in MAINTAINERS
ipv4: fix race condition between route lookup and invalidation
...
Eric Dumazet [Fri, 18 Oct 2019 22:20:05 +0000 (15:20 -0700)]
net: reorder 'struct net' fields to avoid false sharing
Intel test robot reported a ~7% regression on TCP_CRR tests
that they bisected to the cited commit.
Indeed, every time a new TCP socket is created or deleted,
the atomic counter net->count is touched (via get_net(net)
and put_net(net) calls)
So cpus might have to reload a contended cache line in
net_hash_mix(net) calls.
We need to reorder 'struct net' fields to move @hash_mix
in a read mostly cache line.
We move in the first cache line fields that can be
dirtied often.
We probably will have to address in a followup patch
the __randomize_layout that was added in linux-4.13,
since this might break our placement choices.
Fixes: 355b98553789 ("netns: provide pure entropy for net_hash_mix()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 18 Oct 2019 21:02:46 +0000 (17:02 -0400)]
net: dsa: fix switch tree list
If there are multiple switch trees on the device, only the last one
will be listed, because the arguments of list_add_tail are swapped.
Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation") Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mans Rullgard [Fri, 18 Oct 2019 16:56:58 +0000 (17:56 +0100)]
net: ethernet: dwmac-sun8i: show message only when switching to promisc
Printing the info message every time more than the max number of mac
addresses are requested generates unnecessary log spam. Showing it only
when the hw is not already in promiscous mode is equally informative
without being annoying.
Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chenwandun [Fri, 18 Oct 2019 10:20:37 +0000 (18:20 +0800)]
net: aquantia: add an error handling in aq_nic_set_multicast_list
add an error handling in aq_nic_set_multicast_list, it may not
work when hw_multicast_list_set error; and at the same time
it will remove gcc Wunused-but-set-variable warning.
Signed-off-by: Chenwandun <chenwandun@huawei.com> Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: netem: fix further issues with packet corruption
This set is fixing two more issues with the netem packet corruption.
First patch (which was previously posted) avoids NULL pointer dereference
if the first frame gets freed due to allocation or checksum failure.
v2 improves the clarity of the code a little as requested by Cong.
Second patch ensures we don't return SUCCESS if the frame was in fact
dropped. Thanks to this commit message for patch 1 no longer needs the
"this will still break with a single-frame failure" disclaimer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Oct 2019 16:16:58 +0000 (09:16 -0700)]
net: netem: correct the parent's backlog when corrupted packet was dropped
If packet corruption failed we jump to finish_segs and return
NET_XMIT_SUCCESS. Seeing success will make the parent qdisc
increment its backlog, that's incorrect - we need to return
NET_XMIT_DROP.
Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Oct 2019 16:16:57 +0000 (09:16 -0700)]
net: netem: fix error path for corrupted GSO frames
To corrupt a GSO frame we first perform segmentation. We then
proceed using the first segment instead of the full GSO skb and
requeue the rest of the segments as separate packets.
If there are any issues with processing the first segment we
still want to process the rest, therefore we jump to the
finish_segs label.
Commit 177b8007463c ("net: netem: fix backlog accounting for
corrupted GSO frames") started using the pointer to the first
segment in the "rest of segments processing", but as mentioned
above the first segment may had already been freed at this point.
Backlog corrections for parent qdiscs have to be adjusted.
Fixes: 177b8007463c ("net: netem: fix backlog accounting for corrupted GSO frames") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Tretter [Fri, 18 Oct 2019 14:11:43 +0000 (16:11 +0200)]
macb: propagate errors when getting optional clocks
The tx_clk, rx_clk, and tsu_clk are optional. Currently the macb driver
marks clock as not available if it receives an error when trying to get
a clock. This is wrong, because a clock controller might return
-EPROBE_DEFER if a clock is not available, but will eventually become
available.
In these cases, the driver would probe successfully but will never be
able to adjust the clocks, because the clocks were not available during
probe, but became available later.
For example, the clock controller for the ZynqMP is implemented in the
PMU firmware and the clocks are only available after the firmware driver
has been probed.
Use devm_clk_get_optional() in instead of devm_clk_get() to get the
optional clock and propagate all errors to the calling function.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Juergen Gross [Fri, 18 Oct 2019 07:45:49 +0000 (09:45 +0200)]
xen/netback: fix error path of xenvif_connect_data()
xenvif_connect_data() calls module_put() in case of error. This is
wrong as there is no related module_get().
Remove the superfluous module_put().
Fixes: 279f438e36c0a7 ("xen-netback: Don't destroy the netdev until the vif is shut down") Cc: <stable@vger.kernel.org> # 3.12 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the num_msi_left means the vector numbers of NIC,
but if the PF supported RoCE, it contains the vector numbers
of NIC and RoCE(Not expected).
This may cause interrupts lost in some case, because of the
NIC module used the vector resources which belongs to RoCE.
This patch adds a new variable num_nic_msi to store the vector
numbers of NIC, and adjust the default TQP numbers and rss_size
according to the value of num_nic_msi.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 19 Oct 2019 10:53:59 +0000 (06:53 -0400)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Rather a lot of fixes, almost all affecting mm/"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
scripts/gdb: fix debugging modules on s390
kernel/events/uprobes.c: only do FOLL_SPLIT_PMD for uprobe register
mm/thp: allow dropping THP from page cache
mm/vmscan.c: support removing arbitrary sized pages from mapping
mm/thp: fix node page state in split_huge_page_to_list()
proc/meminfo: fix output alignment
mm/init-mm.c: include <linux/mman.h> for vm_committed_as_batch
mm/filemap.c: include <linux/ramfs.h> for generic_file_vm_ops definition
mm: include <linux/huge_mm.h> for is_vma_temporary_stack
zram: fix race between backing_dev_show and backing_dev_store
mm/memcontrol: update lruvec counters in mem_cgroup_move_account
ocfs2: fix panic due to ocfs2_wq is null
hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()
mm: memblock: do not enforce current limit for memblock_phys* family
mm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size
mm/gup: fix a misnamed "write" argument, and a related bug
mm/gup_benchmark: add a missing "w" to getopt string
ocfs2: fix error handling in ocfs2_setattr()
mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release
mm/memunmap: don't access uninitialized memmap in memunmap_pages()
...