Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Three small cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lguest: Read offset of device_cap later
lguest: Read length of device_cap later
x86: Do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
- EBDA/BIOS region boot quirk cleanups (Andy Lutomirski, Ingo Molnar)
- misc cleanups/fixes"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Simplify EBDA-vs-BIOS reservation logic
x86/boot: Clarify what x86_legacy_features.reserve_bios_regions does
x86/boot: Reorganize and clean up the BIOS area reservation code
x86/mm: Do not reference phys addr beyond kernel
x86/mm: Add memory hotplug support for KASLR memory randomization
x86/mm: Enable KASLR for vmalloc memory regions
x86/mm: Enable KASLR for physical mapping memory regions
x86/mm: Implement ASLR for kernel memory regions
x86/mm: Separate variable for trampoline PGD
x86/mm: Add PUD VA support for physical mapping
x86/mm: Update physical mapping variable names
x86/mm: Refactor KASLR entropy functions
x86/KASLR: Fix boot crash with certain memory configurations
x86/boot/64: Add forgotten end of function marker
x86/KASLR: Allow randomization below the load address
x86/KASLR: Extend kernel image physical address randomization to addresses larger than 4G
x86/KASLR: Randomize virtual address separately
x86/KASLR: Clarify identity map interface
x86/boot: Refuse to build with data relocations
x86/KASLR, x86/power: Remove x86 hibernation restrictions
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
x86/mm/cpa: Add missing comment in populate_pdg()
x86/mm/cpa: Fix populate_pgd(): Stop trying to deallocate failed PUDs
x86/syscalls: Add compat_sys_preadv64v2/compat_sys_pwritev64v2
x86/smp: Remove unnecessary initialization of thread_info::cpu
x86/smp: Remove stack_smp_processor_id()
x86/uaccess: Move thread_info::addr_limit to thread_struct
x86/dumpstack: Rename thread_struct::sig_on_uaccess_error to sig_on_uaccess_err
x86/uaccess: Move thread_info::uaccess_err and thread_info::sig_on_uaccess_err to thread_struct
x86/dumpstack: When OOPSing, rewind the stack before do_exit()
x86/mm/64: In vmalloc_fault(), use CR3 instead of current->active_mm
x86/dumpstack/64: Handle faults when printing the "Stack: " part of an OOPS
x86/dumpstack: Try harder to get a call trace on stack overflow
x86/mm: Remove kernel_unmap_pages_in_pgd() and efi_cleanup_page_tables()
x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated
x86/mm/hotplug: Don't remove PGD entries in remove_pagetable()
x86/mm: Use pte_none() to test for empty PTE
x86/mm: Disallow running with 32-bit PTEs to work around erratum
x86/mm: Ignore A/D bits in pte/pmd/pud_none()
x86/mm: Move swap offset/type up in PTE to work around erratum
x86/entry: Inline enter_from_user_mode()
...
Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull NOHZ updates from Ingo Molnar:
- fix system/idle cputime leaked on cputime accounting (all nohz
configs) (Rik van Riel)
- remove the messy, ad-hoc irqtime account on nohz-full and make it
compatible with CONFIG_IRQ_TIME_ACCOUNTING=y instead (Rik van Riel)
- cleanups (Frederic Weisbecker)
- remove unecessary irq disablement in the irqtime code (Rik van Riel)
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Drop local_irq_save/restore from irqtime_account_irq()
sched/cputime: Reorganize vtime native irqtime accounting headers
sched/cputime: Clean up the old vtime gen irqtime accounting completely
sched/cputime: Replace VTIME_GEN irq time code with IRQ_TIME_ACCOUNTING code
sched/cputime: Count actually elapsed irq & softirq time
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- introduce and use task_rcu_dereference()/try_get_task_struct() to fix
and generalize task_struct handling (Oleg Nesterov)
- do various per entity load tracking (PELT) fixes and optimizations
(Peter Zijlstra)
- cputime virt-steal time accounting enhancements/fixes (Wanpeng Li)
- introduce consolidated cputime output file cpuacct.usage_all and
related refactorings (Zhao Lei)
- ... plus misc fixes and enhancements
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Panic on scheduling while atomic bugs if kernel.panic_on_warn is set
sched/cpuacct: Introduce cpuacct.usage_all to show all CPU stats together
sched/cpuacct: Use loop to consolidate code in cpuacct_stats_show()
sched/cpuacct: Merge cpuacct_usage_index and cpuacct_stat_index enums
sched/fair: Rework throttle_count sync
sched/core: Fix sched_getaffinity() return value kerneldoc comment
sched/fair: Reorder cgroup creation code
sched/fair: Apply more PELT fixes
sched/fair: Fix PELT integrity for new tasks
sched/cgroup: Fix cpu_cgroup_fork() handling
sched/fair: Fix PELT integrity for new groups
sched/fair: Fix and optimize the fork() path
sched/cputime: Add steal time support to full dynticks CPU time accounting
sched/cputime: Fix prev steal time accouting during CPU hotplug
KVM: Fix steal clock warp during guest CPU hotplug
sched/debug: Always show 'nr_migrations'
sched/fair: Use task_rcu_dereference()
sched/api: Introduce task_rcu_dereference() and try_get_task_struct()
sched/idle: Optimize the generic idle loop
sched/fair: Fix the wrong throttled clock time for cfs_rq_clock_task()
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"With over 300 commits it's been a busy cycle - with most of the work
concentrated on the tooling side (as it should).
The main kernel side enhancements were:
- Add per event callchain limit: Recently we introduced a sysctl to
tune the max-stack for all events for which callchains were
requested:
Now this patch introduces a way to configure this per event, i.e.
this becomes possible:
$ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a
allowing finer tuning of how much buffer space callchains use.
This uses an u16 from the reserved space at the end, leaving
another u16 for future use.
There has been interest in even finer tuning, namely to control the
max stack for kernel and userspace callchains separately. Further
discussion is needed, we may for instance use the remaining u16 for
that and when it is present, assume that the sample_max_stack
introduced in this patch applies for the kernel, and the u16 left
is used for limiting the userspace callchain (Arnaldo Carvalho de
Melo)
- Rework Intel family name macro usage (this is partially x86 arch
work) (Dave Hansen)
- Refine and fix Intel LBR support (David Carrillo-Cisneros)
- Add support for Intel 'TopDown' events (Andi Kleen)
- Intel uncore PMU driver fixes and enhancements (Kan Liang)
- ... other misc changes.
Here's an incomplete list of the tooling enhancements (but there's
much more, see the shortlog and the git log for details):
- Support cross unwinding, i.e. collecting '--call-graph dwarf'
perf.data files in one machine and then doing analysis in another
machine of a different hardware architecture. This enables, for
instance, to do:
$ perf record -a --call-graph dwarf
on a x86-32 or aarch64 system and then do 'perf report' on it on a
x86_64 workstation (He Kuang)
- Allow reading from a backward ring buffer (one setup via
sys_perf_event_open() with perf_event_attr.write_backward = 1)
(Wang Nan)
- Finish merging initial SDT (Statically Defined Traces) support, see
cset comments for details about how it all works (Masami Hiramatsu)
- Support attaching eBPF programs to tracepoints (Wang Nan)
- Add demangling of symbols in programs written in the Rust language
(David Tolnay)
- Add support for tracepoints in the python binding, including an
example, that sets up and parses sched:sched_switch events,
tools/perf/python/tracepoint.py (Jiri Olsa)
- Introduce --stdio-color to set up the color output mode selection
in 'annotate' and 'report', allowing emit color escape sequences
when redirecting the output of these tools (Arnaldo Carvalho de
Melo)
- Add 'callindent' option to 'perf script -F', to indent the Intel PT
call stack, making this output more ftrace-like (Adrian Hunter,
Andi Kleen)
- Allow dumping the object files generated by llvm when processing
eBPF scriptlet events (Wang Nan)
- Add stackcollapse.py script to help generating flame graphs (Paolo
Bonzini)
- Add --ldlat option to 'perf mem' to specify load latency for loads
event (e.g. cpu/mem-loads/ ) (Jiri Olsa)
- Tooling support for Intel TopDown counters, recently added to the
kernel (Andi Kleen)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
perf tests: Add is_printable_array test
perf tools: Make is_printable_array global
perf script python: Fix string vs byte array resolving
perf probe: Warn unmatched function filter correctly
perf cpu_map: Add more helpers
perf stat: Balance opening and reading events
tools: Copy linux/{hash,poison}.h and check for drift
perf tools: Remove include/linux/list.h from perf's MANIFEST
tools: Copy the bitops files accessed from the kernel and check for drift
Remove: kernel unistd*h files from perf's MANIFEST, not used
perf tools: Remove tools/perf/util/include/linux/const.h
perf tools: Remove tools/perf/util/include/asm/byteorder.h
perf tools: Add missing linux/compiler.h include to perf-sys.h
perf jit: Remove some no-op error handling
perf jit: Add missing curly braces
objtool: Initialize variable to silence old compiler
objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
perf record: Add --tail-synthesize option
perf session: Don't warn about out of order event if write_backward is used
perf tools: Enable overwrite settings
...
Merge branch 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"The biggest change in this cycle was an enhancement by Yazen Ghannam
to reduce the number of MCE error injection related IPIs.
The rest are smaller fixes"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix mce_rdmsrl() warning message
x86/RAS/AMD: Reduce the number of IPIs when prepping error injection
x86/mce/AMD: Increase size of the bank_map type
x86/mce: Do not use bank 1 for APEI generated error logs
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The locking tree was busier in this cycle than the usual pattern - a
couple of major projects happened to coincide.
The main changes are:
- implement the atomic_fetch_{add,sub,and,or,xor}() API natively
across all SMP architectures (Peter Zijlstra)
- add atomic_fetch_{inc/dec}() as well, using the generic primitives
(Davidlohr Bueso)
- optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
Waiman Long)
- optimize smp_cond_load_acquire() on arm64 and implement LSE based
atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
on arm64 (Will Deacon)
- introduce smp_acquire__after_ctrl_dep() and fix various barrier
mis-uses and bugs (Peter Zijlstra)
- after discovering ancient spin_unlock_wait() barrier bugs in its
implementation and usage, strengthen its semantics and update/fix
usage sites (Peter Zijlstra)
Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The biggest change in this cycle were SGI/UV related changes that
clean up and fix UV boot quirks and problems.
There's also various smaller cleanups and refinements"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Reorganize the GUID table to make it easier to read
x86/efi: Remove the unused efi_get_time() function
x86/efi: Update efi_thunk() to use the the arch_efi_call_virt*() macros
x86/uv: Update uv_bios_call() to use efi_call_virt_pointer()
efi: Convert efi_call_virt() to efi_call_virt_pointer()
x86/efi: Remove unused variable 'efi'
efi: Document #define FOO_PROTOCOL_GUID layout
efibc: Report more information in the error messages
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- documentation updates
- miscellaneous fixes
- minor reorganization of code
- torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
rcu: Correctly handle sparse possible cpus
rcu: sysctl: Panic on RCU Stall
rcu: Fix a typo in a comment
rcu: Make call_rcu_tasks() tolerate first call with irqs disabled
rcu: Disable TASKS_RCU for usermode Linux
rcu: No ordering for rcu_assign_pointer() of NULL
rcutorture: Fix error return code in rcu_perf_init()
torture: Inflict default jitter
rcuperf: Don't treat gp_exp mis-setting as a WARN
rcutorture: Drop "-soundhw pcspkr" from x86 boot arguments
rcutorture: Don't specify the cpu type of QEMU on PPC
rcutorture: Make -soundhw a x86 specific option
rcutorture: Use vmlinux as the fallback kernel image
rcutorture/doc: Create initrd using dracut
torture: Stop onoff task if there is only one cpu
torture: Add starvation events to error summary
torture: Break online and offline functions out of torture_onoff()
torture: Forgive lengthy trace dumps and preemption
torture: Remove CONFIG_RCU_TORTURE_TEST_RUNNABLE, simplify code
torture: Simplify code, eliminate RCU_PERF_TEST_RUNNABLE
...
Merge tag 'hwmon-for-linus-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- New drivers for FTS BMC "Teutates", TI INA3221, and Sensirion SHT3x.
- Added support for Microchip MCP9808 and TI TMP461.
- Cleanup and minor fixes in various drivers.
* tag 'hwmon-for-linus-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
Documentation: dtb: xgene: Add hwmon dts binding documentation
hwmon: (ftsteutates) Remove unused including <linux/version.h>
hwmon: (adt7411) set bit 3 in CFG1 register
hwmon: Add driver for FTS BMC chip "Teutates"
hwmon: (sht3x) add humidity heater element control
hwmon: (jc42) Add support for generic JC-42.4 devicetree binding
dt/bindings: Add bindings for JC-42.4 compatible temperature sensors
hwmon: (tmp102) Convert to use regmap, and drop local cache
hwmon: (tmp102) Rework chip configuration
hwmon: (tmp102) Improve handling of initial read delay
hwmon: (lm90) Drop unnecessary else statements
hwmon: (lm90) Use bool for valid flag
hwmon: (lm90) Read limit registers only once
hwmon: (lm90) Simplify read functions
hwmon: (lm90) Use devm_hwmon_device_register_with_groups
hwmon: (lm90) Use devm_add_action for cleanup
hwmon: (lm75) Convert to use regmap
hwmon: (lm75) Add update_interval attribute
hwmon: (lm75) Drop lm75_read_value and lm75_write_value
hwmon: (lm75) Handle cleanup with devm_add_action
...
Merge tag 'renesas-sh-drivers-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas
Pull SH drivers updates from Simon Horman:
"Drop use of SH Drivers on Renesas ARM Based SoCs.
I expect this to be my last pull request for these drivers as it
removes usage of them from Renesas ARM Based SoCs and my
co-maintenance of them.
The drivers are still used by some SH SoCs and listed under SUPERH in
the MAINTAINERS file"
* tag 'renesas-sh-drivers-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
MAINTAINERS: Drop drivers/sh/ for Renesas ARM
drivers: sh: Stop using the legacy clock domain on ARM
Merge tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB driver update for 4.8-rc1. Lots of the normal
stuff in here, musb, gadget, xhci, and other updates and fixes. All
of the details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
cdc-acm: beautify probe()
cdc-wdm: use the common CDC parser
cdc-acm: cleanup error handling
cdc-acm: use the common parser
usbnet: move the CDC parser into USB core
usb: musb: sunxi: Simplify dr_mode handling
usb: musb: sunxi: make unexported symbols static
usb: musb: cppi41: add dma channel tracepoints
usb: musb: cppi41: move struct cppi41_dma_channel to header
usb: musb: cleanup cppi_dma header
usb: musb: gadget: add usb-request tracepoints
usb: musb: host: add urb tracepoints
usb: musb: add tracepoints to dump interrupt events
usb: musb: add tracepoints for register access
usb: musb: dsps: use musb register read/write wrappers instead
usb: musb: switch dev_dbg to tracepoints
usb: musb: add tracepoints support for debugging
usb: quirks: Add no-lpm quirk for Elan
phy: rcar-gen3-usb2: fix mutex_lock calling in interrupt
phy: rockhip-usb: use devm_add_action_or_reset()
...
Merge tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the big Staging and IIO driver update for 4.8-rc1.
We ended up adding more code than removing, again, but it's not all
that bad. Lots of cleanups all over the staging tree, and new IIO
drivers, full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (417 commits)
drivers:iio:accel:mma8452: removed unwanted return statements
drivers:iio:accel:mma8452: added cleanup provision in case of failure.
iio: Add iio.git tree to MAINTAINERS
iio:st_pressure: clean useless static channel initializers
iio:st_pressure:lps22hb: temperature support
iio:st_pressure:lps22hb: open drain support
iio:st_pressure: temperature triggered buffering
iio:st_pressure: document sampling gains
iio:st_pressure: align storagebits on power of 2
iio:st_sensors: align on storagebits boundaries
staging:iio:lis3l02dq drop separate driver
iio: accel: st_accel: Add lis3l02dq support
iio: adc: add missing of_node references to iio_dev
iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
iio: potentiometer: Fix typo in Kconfig
iio: potentiometer: mcp4531: Add device tree binding
iio: potentiometer: mcp4531: Add device tree binding documentation
iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
iio:imu:mpu6050: icm20608 initial support
iio: adc: max1363: Add device tree binding
...
Merge tag 'char-misc-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.8-rc1.
Not a lot of stuff, but it's all over the place, full details are in
the shortlog. All of these have been in linux-next with no reported
issues for a while"
* tag 'char-misc-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (49 commits)
lkdtm: silence warnings about function declarations
lkdtm: hide unused functions
intel_th: pci: Add Kaby Lake PCH-H support
intel_th: Fix a deadlock in modprobing
dsp56k: prevent a harmless underflow
chardev: add missing line break in pr_warn
lkdtm: use struct arrays instead of enums
lkdtm: move jprobe entry points to start of source
lkdtm: reorganize module paramaters
lkdtm: rename globals for clarity
lkdtm: rename "count" to "crash_count"
lkdtm: remove intentional off-by-one array access
lkdtm: split remaining logic bug tests to separate file
lkdtm: split heap corruption tests to separate file
lkdtm: split memory permissions tests to separate file
lkdtm: split usercopy tests to separate file
lkdtm: drop "alloc_size" parameter
lkdtm: add usercopy test for blocking kernel text
extcon: adc-jack: add suspend/resume support
extcon: add missing of_node_put after calling of_parse_phandle
...
Merge tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've got ten patches this time, half of which are related to a
plethora of nasty outcomes when inodes are transitioned from the
unlinked state to the free state. Small file systems are particularly
vulnerable to these problems, and it can manifest as mainly hangs, but
also file system corruption. The patches have been tested for
literally many weeks, with a very gruelling test, so I have a high
level of confidence.
- Andreas Gruenbacher wrote a series of five patches for various
lockups during the transition of inodes from unlinked to free.
The main patch is titled "Fix gfs2_lookup_by_inum lock inversion"
and the other four are support and cleanup patches related to that.
- Ben Marzinski contributed two patches with regard to a recreatable
problem when gfs2 tries to write a page to a file that is being
truncated, resulting in a BUG() in gfs2_remove_from_journal.
Note that Ben had to export vfs function __block_write_full_page to
get this to work properly. It's been posted a long time and he
talked to various VFS people about it, and nobody seemed to mind.
- I contributed 3 patches:
o The first one fixes a memory corruptor: a race in which one
process can overwrite the gl_object pointer set by another
process, causing kernel panic and other symptoms.
o The second patch fixes another race that resulted in a
false-positive BUG_ON. This occurred when resource group
reservations were freed by one process while another process
was trying to grab a new reservation in the same resource
group.
o The third patch fixes a problem with doing journal replay when
the journals are not all the same size"
* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Fix gfs2_replay_incr_blk for multiple journal sizes
GFS2: Check rs_free with rd_rsspin protection
gfs2: writeout truncated pages
fs: export __block_write_full_page
gfs2: Lock holder cleanup
gfs2: Large-filesystem fix for 32-bit systems
gfs2: Get rid of gfs2_ilookup
gfs2: Fix gfs2_lookup_by_inum lock inversion
gfs2: Initialize iopen glock holder for new inodes
GFS2: don't set rgrp gl_object until it's inserted into rgrp tree
Merge tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a long-standing bug in the incremental osdmap handling code
that caused misdirected requests, tagged for stable"
The tag is signed with a brand new key - Sage is on vacation and I
didn't anticipate this"
* tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client:
libceph: apply new_state before new_up_client on incrementals
Andy Lutomirski [Sat, 23 Jul 2016 04:58:08 +0000 (21:58 -0700)]
x86/mm/cpa: Fix populate_pgd(): Stop trying to deallocate failed PUDs
Valdis Kletnieks bisected a boot failure back to this recent commit:
360cb4d15567 ("x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated")
I broke the case where a PUD table got allocated -- populate_pud()
would wander off a pgd_none entry and get lost. I'm not sure how
this survived my testing.
Fix the original issue in a much simpler way. The problem
was that, if we allocated a PUD table, failed to populate it, and
freed it, another CPU could potentially keep using the PGD entry we
installed (either by copying it via vmalloc_fault or by speculatively
caching it). There's a straightforward fix: simply leave the
top-level entry in place if this happens. This can't waste any
significant amount of memory -- there are at most 256 entries like
this systemwide and, as a practical matter, if we hit this failure
path repeatedly, we're likely to reuse the same page anyway.
For context, this is a reversion with this hunk added in:
if (ret < 0) {
+ /*
+ * Leave the PUD page in place in case some other CPU or thread
+ * already found it, but remove any useless entries we just
+ * added to it.
+ */
- unmap_pgd_range(cpa->pgd, addr,
+ unmap_pud_range(pgd_entry, addr,
addr + (cpa->numpages << PAGE_SHIFT));
return ret;
}
This effectively open-codes what the now-deleted unmap_pgd_range()
function used to do except that unmap_pgd_range() used to try to
free the page as well.
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Mike Krinkin <krinkin.m.u@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/21cbc2822aa18aa812c0215f4231dbf5f65afa7f.1469249789.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
1) Fix memory leak in nftables, from Liping Zhang.
2) Need to check result of vlan_insert_tag() in batman-adv otherwise we
risk NULL skb derefs, from Sven Eckelmann.
3) Check for dev_alloc_skb() failures in cfg80211, from Gregory
Greenman.
4) Handle properly when we have ppp_unregister_channel() happening in
parallel with ppp_connect_channel(), from WANG Cong.
5) Fix DCCP deadlock, from Eric Dumazet.
6) Bail out properly in UDP if sk_filter() truncates the packet to be
smaller than even the space that the protocol headers need. From
Michal Kubecek.
7) Similarly for rose, dccp, and sctp, from Willem de Bruijn.
8) Make TCP challenge ACKs less predictable, from Eric Dumazet.
9) Fix infinite loop in bgmac_dma_tx_add() from Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
packet: propagate sock_cmsg_send() error
net/mlx5e: Fix del vxlan port command buffer memset
packet: fix second argument of sock_tx_timestamp()
net: switchdev: change ageing_time type to clock_t
Update maintainer for EHEA driver.
net/mlx4_en: Add resilience in low memory systems
net/mlx4_en: Move filters cleanup to a proper location
sctp: load transport header after sk_filter
net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int
net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata
net: nb8800: Fix SKB leak in nb8800_receive()
et131x: Fix logical vs bitwise check in et131x_tx_timeout()
vlan: use a valid default mtu value for vlan over macsec
net: bgmac: Fix infinite loop in bgmac_dma_tx_add()
mlxsw: spectrum: Prevent invalid ingress buffer mapping
mlxsw: spectrum: Prevent overwrite of DCB capability fields
mlxsw: spectrum: Don't emit errors when PFC is disabled
mlxsw: spectrum: Indicate support for autonegotiation
mlxsw: spectrum: Force link training according to admin state
r8152: add MODULE_VERSION
...
Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This contains a fix for a potential crash/corruption issue and another
where the suid/sgid bits weren't cleared on write"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: verify upper dentry in ovl_remove_and_whiteout()
ovl: Copy up underlying inode's ->i_mode to overlay inode
ovl: handle ATTR_KILL*
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
pps: do not crash when failed to register
tools/vm/slabinfo: fix an unintentional printf
testing/radix-tree: fix a macro expansion bug
radix-tree: fix radix_tree_iter_retry() for tagged iterators.
mm: memcontrol: fix cgroup creation failure after many small jobs
Merge tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of git://people.freedesktop.org/~airlied/linux
Pull intel kabylake drm fixes from Dave Airlie:
"As mentioned Intel has gathered all the Kabylake fixes from -next,
which we've enabled in 4.7 for the first time, these are pretty much
limited in scope to only affects kabylake, which is hw that isn't
shipping yet. So I'm mostly okay with it going in now.
If we don't land this, it might be a good idea to disable kabylake
support in 4.7 before we ship"
* tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of git://people.freedesktop.org/~airlied/linux: (28 commits)
drm/i915/kbl: Introduce the first official DMC for Kabylake.
drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.
drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate
drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance
drm/i195/fbc: Add WaFbcNukeOnHostModify
drm/i915/gen9: Add WaFbcWakeMemOn
drm/i915/gen9: Add WaFbcTurnOffFbcWatermark
drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch
drm/i915/gen9: Add WaEnableChickenDCPR
drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing
drm/i915/kbl: Add WaDisableGafsUnitClkGating
drm/i915/kbl: Add WaForGAMHang
drm/i915: Add WaInsertDummyPushConstP for bxt and kbl
drm/i915/kbl: Add WaDisableDynamicCreditSharing
drm/i915/kbl: Add WaDisableGamClockGating
drm/i915/gen9: Enable must set chicken bits in config0 reg
drm/i915/kbl: Add WaDisableLSQCROPERFforOCL
drm/i915/kbl: Add WaDisableSDEUnitClockGating
drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0
drm/i915/kbl: Add WaEnableGapsTsvCreditFix
...
Merge tag 'drm-fixes-for-v4.7-rc8-intel' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Two i915 regression fixes.
Intel have submitted some Kabylake fixes I'll send separately, since
this is the first kernel with kabylake support and they don't go much
outside that area I think they should be fine"
* tag 'drm-fixes-for-v4.7-rc8-intel' of git://people.freedesktop.org/~airlied/linux:
drm/i915: add missing condition for committing planes on crtc
drm/i915: Treat eDP as always connected, again
* tag 'm68k-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/defconfig: Update defconfigs for v4.7-rc2
m68k: Assorted spelling fixes
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes before final release:
Marvell Armada:
- One to fix a typo in the devicetree specifying memory ranges for
the crypto engine
- Two to deal with marking PCI and device-memory as strongly ordered
to avoid hardware deadlocks, in particular when enabling above
crypto driver.
- Compile fix for PM
Allwinner:
- DT clock fixes to deal with u-boot-enabled framebuffer (simplefb).
- Make R8 (C.H.I.P. SoC) inherit system compatibility from A13 to
make clocks register proper.
Tegra:
- Fix SD card voltage setting on the Tegra3 Beaver dev board
Misc:
- Two maintainers updates for STM32 and STi platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: tegra: beaver: Allow SD card voltage to be changed
MAINTAINERS: update STi maintainer list
MAINTAINERS: update STM32 maintainers list
ARM: mvebu: compile pm code conditionally
ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock
ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists
ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys
ARM: mvebu: map PCI I/O regions strongly ordered
ARM: mvebu: fix HW I/O coherency related deadlocks
ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull key handling fixes from James Morris:
"Quoting David Howells:
Here are three miscellaneous fixes:
(1) Fix a panic in some debugging code in PKCS#7. This can only
happen by explicitly inserting a #define DEBUG into the code.
(2) Fix the calculation of the digest length in the PE file parser.
This causes a failure where there should be a success.
(3) Fix the case where an X.509 cert can be added as an asymmetric key
to a trusted keyring with no trust restriction if no AKID is
supplied.
Bugs (1) and (2) aren't particularly problematic, but (3) allows a
security check to be bypassed. Happily, this is a recent regression
and never made it into a released kernel"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: Fix for erroneous trust of incorrectly signed X.509 certs
pefile: Fix the failure of calculation for digest
PKCS#7: Fix panic when referring to the empty AKID when DEBUG defined
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A few more fixes for the input subsystem:
- restore naming for tsc2005 touchscreens as some userspace match on it
- fix out of bound access in legacy keyboard driver
- fixup in RMI4 driver
Everything is tagged for stable as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: tsc200x - report proper input_dev name
tty/vt/keyboard: fix OOB access in do_compute_shiftstate()
Input: synaptics-rmi4 - fix maximum size check for F12 control register 8
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"This contains a regression fix for a problem that was introduced in
v4.7-rc6.
In 4.7-rc1 we introduced auto-probing for the ACPI DSM (device-
specific-method) format that the platform firmware implements for
nvdimm devices. We initially fixed a regression in probing the QEMU
DSM implementation by making acpi_check_dsm() tolerant of the way QEMU
reports the "0 DSMs supported" condition.
However, that broke HPE platforms since that tolerance caused the
driver to mistakenly match the 1-zero-byte response those platforms
give to "unknown" commands. Instead, we simply make the driver
tolerant of not finding any supported DSMs. This has been tested to
work with both QEMU and HPE platforms.
This commit has appeared in a -next release with no reported issues"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: make DIMM DSMs optional
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Michael Turquette:
"Fix a bug in the at91 clk driver, two compile time warnings in sunxi
clk drivers, and one bug in a sunxi clk driver introduced in the 4.7
merge window"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: at91: fix clk_programmable_set_parent()
clk: sunxi: remove unused variable
clk: sunxi: display: Add per-clock flags
clk: sunxi: tcon-ch1: Do not return a negative error in get_parent
Merge tag 'sound-4.7-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No surprise, just a few small fixes: a couple of changes are seen in
the core part, and both of them are rather for unusual error paths.
The rest are the regular HD-audio fixes and one USB-audio regression
fix"
* tag 'sound-4.7-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix quirks code is not called
ALSA: hda: add AMD Stoney PCI ID with proper driver caps
ALSA: hda - fix use-after-free after module unload
ALSA: pcm: Free chmap at PCM free callback, too
ALSA: ctl: Stop notification after disconnection
ALSA: hda/realtek - add new pin definition in alc225 pin quirk table
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull NVMe fix from Jens Axboe:
"Late addition here, it's basically a revert of a patch that was added
in this merge window, but has proven to cause problems.
This is swapping out the RCU based namespace protection with a good
old mutex instead"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: Remove RCU namespace protection
Dan Carpenter [Wed, 20 Jul 2016 22:45:05 +0000 (15:45 -0700)]
tools/vm/slabinfo: fix an unintentional printf
The curly braces are missing here so we print stuff unintentionally.
Fixes: 9da4714a2d44 ('slub: slabinfo update for cmpxchg handling') Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
radix-tree: fix radix_tree_iter_retry() for tagged iterators.
radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags.
Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot()
leading to crash:
Johannes Weiner [Wed, 20 Jul 2016 22:44:57 +0000 (15:44 -0700)]
mm: memcontrol: fix cgroup creation failure after many small jobs
The memory controller has quite a bit of state that usually outlives the
cgroup and pins its CSS until said state disappears. At the same time
it imposes a 16-bit limit on the CSS ID space to economically store IDs
in the wild. Consequently, when we use cgroups to contain frequent but
small and short-lived jobs that leave behind some page cache, we quickly
run into the 64k limitations of outstanding CSSs. Creating a new cgroup
fails with -ENOSPC while there are only a few, or even no user-visible
cgroups in existence.
Although pinning CSSs past cgroup removal is common, there are only two
instances that actually need an ID after a cgroup is deleted: cache
shadow entries and swapout records.
Cache shadow entries reference the ID weakly and can deal with the CSS
having disappeared when it's looked up later. They pose no hurdle.
Swap-out records do need to pin the css to hierarchically attribute
swapins after the cgroup has been deleted; though the only pages that
remain swapped out after offlining are tmpfs/shmem pages. And those
references are under the user's control, so they are manageable.
This patch introduces a private 16-bit memcg ID and switches swap and
cache shadow entries over to using that. This ID can then be recycled
after offlining when the CSS remains pinned only by objects that don't
specifically need it.
This script demonstrates the problem by faulting one cache page in a new
cgroup and deleting it again:
set -e
mkdir -p pages
for x in `seq 128000`; do
[ $((x % 1000)) -eq 0 ] && echo $x
mkdir /cgroup/foo
echo $$ >/cgroup/foo/cgroup.procs
echo trex >pages/$x
echo $$ >/cgroup/cgroup.procs
rmdir /cgroup/foo
done
When run on an unpatched kernel, we eventually run out of possible IDs
even though there are no visible cgroups:
[root@ham ~]# ./cssidstress.sh
[...]
65000
mkdir: cannot create directory '/cgroup/foo': No space left on device
After this patch, the IDs get released upon cgroup destruction and the
cache and css objects get released once memory reclaim kicks in.
[hannes@cmpxchg.org: init the IDR] Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org Fixes: b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined groups") Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: John Garcia <john.garcia@mesosphere.io> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Nikolay Borisov <kernel@kyup.com> Cc: <stable@vger.kernel.org> [3.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I stumbled over a build error with COMPILE_TEST and CONFIG_OF
disabled:
drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe':
drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node'
The problem is that the newly added GPIO_TEGRA Kconfig symbol
does not have a dependency on CONFIG_OF. However, there is another
problem here as the driver gets enabled unconditionally whenever
COMPILE_TEST is set.
This fixes both problems, by making the symbol user-visible
when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y.
As a side-effect, it is now possible to compile-test a Tegra
kernel with GPIO support disabled, which is harmless.
libceph: apply new_state before new_up_client on incrementals
Currently, osd_weight and osd_state fields are updated in the encoding
order. This is wrong, because an incremental map may look like e.g.
new_up_client: { osd=6, addr=... } # set osd_state and addr
new_state: { osd=6, xorstate=EXISTS } # clear osd_state
Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After
applying new_up_client, osd_state is changed to EXISTS | UP. Carrying
on with the new_state update, we flip EXISTS and leave osd6 in a weird
"!EXISTS but UP" state. A non-existent OSD is considered down by the
mapping code
2087 for (i = 0; i < pg->pg_temp.len; i++) {
2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) {
2089 if (ceph_can_shift_osds(pi))
2090 continue;
2091
2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE;
and so requests get directed to the second OSD in the set instead of
the first, resulting in OSD-side errors like:
[WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680
and hung rbds on the client:
[ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0)
[ 493.566805] rbd: rbd0: result -6 xferred 400000
[ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688
The fix is to decouple application from the decoding and:
- apply new_weight first
- apply new_state before new_up_client
- twiddle osd_state flags if marking in
- clear out some of the state if osd is destroyed
Fixes: http://tracker.ceph.com/issues/14901 Cc: stable@vger.kernel.org # 3.15+: 6dd74e44dc1d: libceph: set 'exists' flag for newly up osd Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Andy Lutomirski [Thu, 21 Jul 2016 21:16:52 +0000 (14:16 -0700)]
x86/boot: Simplify EBDA-vs-BIOS reservation logic
Both the intent and the effect of reserve_bios_regions() is simple:
reserve the range from the apparent BIOS start (suitably filtered)
through 1MB and, if the EBDA start address is sensible, extend that
reservation downward to cover the EBDA as well.
The code is overcomplicated, though, and contains head-scratchers
like:
if (ebda_start < BIOS_START_MIN)
ebda_start = BIOS_START_MAX;
That snipped is trying to say "if ebda_start < BIOS_START_MIN,
ignore it".
Simplify it: reorder the code so that it makes sense. This should
have no functional effect under any circumstances.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/ef89c0c761be20ead8bd9a3275743e6259b6092a.1469135598.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
ovl: verify upper dentry in ovl_remove_and_whiteout()
The upper dentry may become stale before we call ovl_lock_rename_workdir.
For example, someone could (mistakenly or maliciously) manually unlink(2)
it directly from upperdir.
To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir
and and check if it matches the upper dentry.
Essentially, it is the same problem and similar solution as in
commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename").
sock_cmsg_send() can return different error codes and not only
-EINVAL, and we should properly propagate them.
Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bob Peterson [Thu, 21 Jul 2016 18:02:44 +0000 (13:02 -0500)]
GFS2: Fix gfs2_replay_incr_blk for multiple journal sizes
Before this patch, if you used gfs2_jadd to add new journals of a
size smaller than the existing journals, replaying those new journals
would withdraw. That's because function gfs2_replay_incr_blk was
using the number of journal blocks (jd_block) from the superblock's
journal pointer. In other words, "My journal's max size" rather than
"the journal we're replaying's size." This patch changes the function
to use the size of the pertinent journal rather than always using the
journal we happen to be using.
x86/boot: Reorganize and clean up the BIOS area reservation code
So the reserve_ebda_region() code has accumulated a number of
problems over the years that make it really difficult to read
and understand:
- The calculation of 'lowmem' and 'ebda_addr' is an unnecessarily
interleaved mess of first lowmem, then ebda_addr, then lowmem tweaks...
- 'lowmem' here means 'super low mem' - i.e. 16-bit addressable memory. In other
parts of the x86 code 'lowmem' means 32-bit addressable memory... This makes it
super confusing to read.
- It does not help at all that we have various memory range markers, half of which
are 'start of range', half of which are 'end of range' - but this crucial
property is not obvious in the naming at all ... gave me a headache trying to
understand all this.
- Also, the 'ebda_addr' name sucks: it highlights that it's an address (which is
obvious, all values here are addresses!), while it does not highlight that it's
the _start_ of the EBDA region ...
- 'BIOS_LOWMEM_KILOBYTES' says a lot of things, except that this is the only value
that is a pointer to a value, not a memory range address!
- The function name itself is a misnomer: it says 'reserve_ebda_region()' while
its main purpose is to reserve all the firmware ROM typically between 640K and
1MB, while the 'EBDA' part is only a small part of that ...
- Likewise, the paravirt quirk flag name 'ebda_search' is misleading as well: this
too should be about whether to reserve firmware areas in the paravirt case.
- In fact thinking about this as 'end of RAM' is confusing: what this function
*really* wants to reserve is firmware data and code areas! Once the thinking is
inverted from a mixed 'ram' and 'reserved firmware area' notion to a pure
'reserved area' notion everything becomes a lot clearer.
To improve all this rewrite the whole code (without changing the logic):
- Firstly invert the naming from 'lowmem end' to 'BIOS reserved area start'
and propagate this concept through all the variable names and constants.
- Then clean up the name of the function itself by renaming it
to reserve_bios_regions() and renaming the ::ebda_search paravirt
flag to ::reserve_bios_regions.
- Fix up all the comments (fix typos), harmonize and simplify their
formulation and remove comments that become unnecessary due to
the much better naming all around.
Jan Stancek [Thu, 30 Jun 2016 10:23:51 +0000 (12:23 +0200)]
crypto: qat - make qat_asym_algs.o depend on asn1 headers
Parallel build can sporadically fail because asn1 headers may
not be built yet by the time qat_asym_algs.o is compiled:
drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory
#include "qat_rsapubkey-asn1.h"
Cc: stable@vger.kernel.org Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Michael Welling [Wed, 20 Jul 2016 17:02:07 +0000 (10:02 -0700)]
Input: tsc200x - report proper input_dev name
Passes input_id struct to the common probe function for the tsc200x drivers
instead of just the bustype.
This allows for the use of the product variable to set the input_dev->name
variable according to the type of touchscreen used. Note that when we
introduced support for TSC2004 we started calling everything TSC200X, so
let's keep this quirk.
Signed-off-by: Michael Welling <mwelling@ieee.org> Cc: stable@vger.kernel.org Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Mon, 27 Jun 2016 21:12:34 +0000 (14:12 -0700)]
tty/vt/keyboard: fix OOB access in do_compute_shiftstate()
The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS,
which is currently 256, whereas number of keys/buttons in input device (and
therefor in key_down) is much larger - KEY_CNT - 768, and that can cause
out-of-bound access when we do
sym = U(key_maps[0][k]);
with large 'k'.
To fix it we should not attempt iterating beyond smaller of NR_KEYS and
KEY_CNT.
Also while at it let's switch to for_each_set_bit() instead of open-coding
it.
net/mlx5e: Fix del vxlan port command buffer memset
memset the command buffers rather than the pointers to them.
Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Tue, 19 Jul 2016 14:43:26 +0000 (16:43 +0200)]
hwmon: (adt7411) set bit 3 in CFG1 register
According to the datasheet you should only write 1 to this bit. If it is
not set, at least AIN3 will return bad values on newer silicon revisions.
Fixes: d84ca5b345c2 ("hwmon: Add driver for ADT7411 voltage and temperature sensor") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
packet: fix second argument of sock_tx_timestamp()
This patch fixes an issue that a syscall (e.g. sendto syscall) cannot
work correctly. Since the sendto syscall doesn't have msg_control buffer,
the sock_tx_timestamp() in packet_snd() cannot work correctly because
the socks.tsflags is set to 0.
So, this patch sets the socks.tsflags to sk->sk_tsflags as default.
Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Reported-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Duggan [Wed, 20 Jul 2016 00:53:59 +0000 (17:53 -0700)]
Input: synaptics-rmi4 - fix maximum size check for F12 control register 8
According to the RMI4 spec the maximum size of F12 control register 8 is
15 bytes. The current code incorrectly reports an error if control 8 is
greater then 14. Making sensors with a control register 8 with 15 bytes
unusable.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reported-by: Chris Healy <cphealy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Vivien Didelot [Mon, 18 Jul 2016 19:02:06 +0000 (15:02 -0400)]
net: switchdev: change ageing_time type to clock_t
The switchdev value for the SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME
attribute is a clock_t and requires to use helpers such as
clock_t_to_jiffies() to convert to milliseconds.
Change ageing_time type from u32 to clock_t to make it explicit.
Fixes: f55ac58ae64c ("switchdev: add bridge ageing_time attribute") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Douglas Miller [Mon, 18 Jul 2016 17:28:45 +0000 (12:28 -0500)]
Update maintainer for EHEA driver.
Since Thadeu left IBM, EHEA has gone mostly unmaintained, since his email
address doesn't work anymore. I'm stepping up to help maintain this
driver upstream.
I'm adding Thadeu's personal e-mail address in Cc, hoping that we can
get his ack.
CC: Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 Jul 2016 23:44:12 +0000 (16:44 -0700)]
Merge branch 'mlx4-fixes'
Tariq Toukan says:
====================
Safe flow for mlx4_en configuration change
This patchset improves the mlx4_en driver resiliency, especially on
systems with low memory. Upon a configuration change that requires
the allocation of new resources, we first try to allocate, prior to
destroying the current ones. Once it is successfully done,
we release the old resources and attach the new ones. Otherwise, we
stay with a functioning interface having the same old configuration.
This improvement became of greater significance after removing the use
of vmap.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the lost of Ethernet port on low memory system,
when driver frees its resources and fails to allocate new resources.
Issue could happen while changing number of channels, rings size or
changing the timestamp configuration.
This fix is necessary because of removing vmap use in the code.
When vmap was in use driver could allocate non-contiguous memory
and make it contiguous with vmap. Now it could fail to allocate
a large chunk of contiguous memory and lose the port.
Current code tries to allocate new resources and then upon success
frees the old resources.
Fixes: 73898db04301 ('net/mlx4: Avoid wrong virtual mappings') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Tue, 19 Jul 2016 19:32:39 +0000 (12:32 -0700)]
nfit: make DIMM DSMs optional
Commit 4995734e973a "acpi, nfit: fix acpi_check_dsm() vs zero functions
implemented" attempted to fix a QEMU regression by supporting its usage
of a zero-mask as a valid response to a DSM-family probe request.
However, this behavior breaks HP platforms that return a zero-mask by
default causing the probe to misidentify the DSM-family.
Instead, the QEMU regression can be fixed by simply not requiring the DSM
family to be identified.
This effectively reverts commit 4995734e973a, and removes the DSM
requirement from the init path.
Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Fixes: 4995734e973a ("acpi, nfit: fix acpi_check_dsm() vs zero functions implemented") Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com> Tested-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dave Airlie [Tue, 19 Jul 2016 08:00:15 +0000 (18:00 +1000)]
Merge tag 'topic/kbl-4.7-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel into drm-fixes
As promised here's the pile of kbl cherry-picks assembled by Mika&Rodrigo.
It's a bit much, but all well-contained to kbl code and been tested for a
while in drm-intel-next. Still separate in case too much, but in that case
I think we'd need to disable kbl by default again (which would be annoying
too) in 4.7.
* tag 'topic/kbl-4.7-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel: (28 commits)
drm/i915/kbl: Introduce the first official DMC for Kabylake.
drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.
drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate
drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance
drm/i195/fbc: Add WaFbcNukeOnHostModify
drm/i915/gen9: Add WaFbcWakeMemOn
drm/i915/gen9: Add WaFbcTurnOffFbcWatermark
drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch
drm/i915/gen9: Add WaEnableChickenDCPR
drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing
drm/i915/kbl: Add WaDisableGafsUnitClkGating
drm/i915/kbl: Add WaForGAMHang
drm/i915: Add WaInsertDummyPushConstP for bxt and kbl
drm/i915/kbl: Add WaDisableDynamicCreditSharing
drm/i915/kbl: Add WaDisableGamClockGating
drm/i915/gen9: Enable must set chicken bits in config0 reg
drm/i915/kbl: Add WaDisableLSQCROPERFforOCL
drm/i915/kbl: Add WaDisableSDEUnitClockGating
drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0
drm/i915/kbl: Add WaEnableGapsTsvCreditFix
...
Merge tag 'perf-core-for-mingo-20160718' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Properly report when a function wildcard produces no matches in 'perf probe'
(Masami Hiramatsu)
- Balance opening and reading events in 'perf stat', which could cause
it to get stuck trying to close invalid file descriptors (Mark Rutland)
Infrastructure changes:
- Copy more headers from the kernel, this time for headers that
were just including the contents of its kernel counterparts, should
help resolving the problems with linux-next, where some uapi related
patches seem to be breaking tools/object/ build. (Arnaldo Carvalho de Melo)
Some more combing will be done, but at least it is possible to build
perf out of tree, via a detached tarball (make help | grep perf),
without including kernel files in its MANIFEST (Arnaldo Carvalho de Melo)
- Fix smatch found errors that were not causing problems, but are
mistakes nonetheless (Dan Carpenter)
- Fix string vs. byte array resolving in the python script code (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Tue, 19 Jul 2016 06:09:20 +0000 (16:09 +1000)]
Merge tag 'drm-intel-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Two more regression fixes for 4.7.
* tag 'drm-intel-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel:
drm/i915: add missing condition for committing planes on crtc
drm/i915: Treat eDP as always connected, again
Willem de Bruijn [Sat, 16 Jul 2016 21:33:15 +0000 (17:33 -0400)]
sctp: load transport header after sk_filter
Do not cache pointers into the skb linear segment across sk_filter.
The function call can trigger pskb_expand_head.
Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int
In kernel HTB keeps tokens in signed 64-bit in nanoseconds. In netlink
protocol these values are converted into pshed ticks (64ns for now) and
truncated to 32-bit. In struct tc_htb_xstats fields "tokens" and "ctokens"
are declared as unsigned 32-bit but they could be negative thus tool 'tc'
prints them as signed. Big values loose higher bits and/or become negative.
This patch clamps tokens in xstat into range from INT_MIN to INT_MAX.
In this way it's easier to understand what's going on here.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
Boris Brezillon [Mon, 18 Jul 2016 07:49:12 +0000 (09:49 +0200)]
clk: at91: fix clk_programmable_set_parent()
Since commit 1bdf02326b71e ("clk: at91: make use of syscon/regmap
internally"), clk_programmable_set_parent() is always selecting the
first parent (AKA slow_clk), no matter what's passed in the 'index'
parameter.
Fix that by initializing the pckr variable to the index value.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Hans Verkuil <hans.verkuil@cisco.com> Fixes: 1bdf02326b71e ("clk: at91: make use of syscon/regmap internally") Cc: <stable@vger.kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1468828152-18389-1-git-send-email-boris.brezillon@free-electrons.com
Jiri Olsa [Sat, 16 Jul 2016 16:11:18 +0000 (18:11 +0200)]
perf script python: Fix string vs byte array resolving
Jirka reported that python code returns all arrays as strings. This
makes impossible to get all items for byte array tracepoint field
containing 0x00 value item.
Fixing this by scanning full length of the array and returning it as
PyByteArray object in case non printable byte is found.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reported-and-Tested-by: Jiri Pirko <jiri@mellanox.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1468685480-18951-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe: Warn unmatched function filter correctly
Warn unmatched function filter correctly instead of warning
"symbol-loading error", since that can be a filter issue.
From the technical point of view, this adds a filter chech in map__load
and if there is a filter, it returns -2 (filter-out), instead of -1
(error), and perf-probe checks it and change message.
E.g. without this fix:
# perf probe -F rt_sp*
no symbols found in [kernel.kallsyms], maybe install a debug package?
Failed to load symbols in kernel
With this fix:
# perf probe -F rt_sp*
no symbols passed the given filter.
Failed to find symbols matched to "rt_sp*"
Error: Failed to show functions.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146885835596.16106.2293540792775552481.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mark Rutland [Fri, 15 Jul 2016 10:08:11 +0000 (11:08 +0100)]
perf cpu_map: Add more helpers
In some cases it's necessry to figure out the map-local index of a given
Linux logical CPU ID. Add a new helper, cpu_map__idx, to acquire this.
As the logic is largely the same as the existing cpu_map__has, this is
rewritten in terms of the new helper.
At the same time, add the inverse operation, cpu_map__cpu, which yields
the logical CPU id for a map-local index. While this can be performed
manually, wrapping this in a helper can make code more legible.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1468577293-19667-3-git-send-email-mark.rutland@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mark Rutland [Fri, 15 Jul 2016 10:08:10 +0000 (11:08 +0100)]
perf stat: Balance opening and reading events
In create_perf_stat_counter, when a target CPU has not been provided, we
call __perf_evsel__open with empty_cpu_map, and open a single FD per
thread. However, in read_counter we assume that we opened events for the
product of threads and CPUs described in the evsel's cpu_map.
Thus, if an evsel has a cpu_map with more than one entry, we will
attempt to access FDs that we didn't open. This could result in a number
of problems (e.g. blocking while reading from STDIN if the fd memory
happened to be initialised to zero).
This is problematic for systems were a logical CPU PMU covers some
arbitrary subset of CPUs. The cpu_map of any evsel for that PMU will be
initialised based on the cpumask exposed through sysfs, even if the user
requests per-thread events.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1468577293-19667-2-git-send-email-mark.rutland@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 34b48db66e08 ("block: remove artifical max_hw_sectors cap"),
max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON
CX1-JB256-HP keeps timing out with higher max_sectors. Revert it to
the previous value.
tools: Copy linux/{hash,poison}.h and check for drift
We were also using this directly from the kernel sources, the two last
cases, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7o14xvacqcjc5llc7gvjjyl8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Remove include/linux/list.h from perf's MANIFEST
It hasn't been used since we made tools/ self sufficiente wrt list.h.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: d1b39d41ebec ("tools: Make list.h self-sufficient") Link: http://lkml.kernel.org/n/tip-w20ueqlf22kh7ctjqo0zjpig@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools: Copy the bitops files accessed from the kernel and check for drift
copy some more kernel files accessed from tools/, check for drift.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-omz8xdyvvxgjiuqzwj6ecm6j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove: kernel unistd*h files from perf's MANIFEST, not used
No need to copy it to a detached tarball as they aren't used anymore
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-lopmaqi439ke10g1j9cxrxwt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not used anymore, remove one more file referencing kernel sources, i.e.
outside of tools/
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ykfjt3t8l0npxfwmekiwwyu6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not used anymore. This also stops include linux/swab.h directly
from the kernel sources, remove that reference from the MANIFEST.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Add missing linux/compiler.h include to perf-sys.h
It uses the likely/unlikely macros, so need to include
<linux/compiler.h>.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-p0xrhgbkicsii9ohmhhprqpi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dan Carpenter [Fri, 15 Jul 2016 21:08:36 +0000 (00:08 +0300)]
perf jit: Remove some no-op error handling
The 'info.e_machine' struct member is an uint16_t so 'm' is never less
than zero. It looks like this was maybe left over code from earlier
versions so I've just removed it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: kernel-janitors@vger.kernel.org Link: http://lkml.kernel.org/r/20160715210836.GB19522@mwanda Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
drm/i915: add missing condition for committing planes on crtc
The i915 driver checks for color management properties changes as part
of a plane update. Therefore a color management update must imply a
plane update, otherwise we never update the transformation matrixes
and degamma/gamma LUTs.
v2: add comment about moving the commit of color management registers
to an async worker
v3: Commit color management register right after vblank
v4: Move back color management commit condition together with planes
commit
v5: Trigger color management commit through the planes commit (Daniel)
v6: Make plane change update more readable
Fixes: 20a34e78f0d7 (drm/i915: Update color management during vblank evasion.) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
References: https://lkml.org/lkml/2016/7/14/614 Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464183041-8478-1-git-send-email-lionel.g.landwerlin@intel.com
(cherry picked from commit e7852a4b3a4fb6f6c18fdaff934580aa8521599a) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>