Paul Mackerras [Mon, 30 Jan 2017 10:21:53 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Enable radix guest support
This adds a few last pieces of the support for radix guests:
* Implement the backends for the KVM_PPC_CONFIGURE_V3_MMU and
KVM_PPC_GET_RMMU_INFO ioctls for radix guests
* On POWER9, allow secondary threads to be on/off-lined while guests
are running.
* Set up LPCR and the partition table entry for radix guests.
* Don't allocate the rmap array in the kvm_memory_slot structure
on radix.
* Don't try to initialize the HPT for radix guests, since they don't
have an HPT.
* Take out the code that prevents the HV KVM module from
initializing on radix hosts.
At this stage, we only support radix guests if the host is running
in radix mode, and only support HPT guests if the host is running in
HPT mode. Thus a guest cannot switch from one mode to the other,
which enables some simplifications.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:52 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Invalidate ERAT on guest entry/exit for POWER9 DD1
On POWER9 DD1, we need to invalidate the ERAT (effective to real
address translation cache) when changing the PIDR register, which
we do as part of guest entry and exit.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:51 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Allow guest exit path to have MMU on
If we allow LPCR[AIL] to be set for radix guests, then interrupts from
the guest to the host can be delivered by the hardware with relocation
on, and thus the code path starting at kvmppc_interrupt_hv can be
executed in virtual mode (MMU on) for radix guests (previously it was
only ever executed in real mode).
Most of the code is indifferent to whether the MMU is on or off, but
the calls to OPAL that use the real-mode OPAL entry code need to
be switched to use the virtual-mode code instead. The affected
calls are the calls to the OPAL XICS emulation functions in
kvmppc_read_one_intr() and related functions. We test the MSR[IR]
bit to detect whether we are in real or virtual mode, and call the
opal_rm_* or opal_* function as appropriate.
The other place that depends on the MMU being off is the optimization
where the guest exit code jumps to the external interrupt vector or
hypervisor doorbell interrupt vector, or returns to its caller (which
is __kvmppc_vcore_entry). If the MMU is on and we are returning to
the caller, then we don't need to use an rfid instruction since the
MMU is already on; a simple blr suffices. If there is an external
or hypervisor doorbell interrupt to handle, we branch to the
relocation-on version of the interrupt vector.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:50 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Invalidate TLB on radix guest vcpu movement
With radix, the guest can do TLB invalidations itself using the tlbie
(global) and tlbiel (local) TLB invalidation instructions. Linux guests
use local TLB invalidations for translations that have only ever been
accessed on one vcpu. However, that doesn't mean that the translations
have only been accessed on one physical cpu (pcpu) since vcpus can move
around from one pcpu to another. Thus a tlbiel might leave behind stale
TLB entries on a pcpu where the vcpu previously ran, and if that task
then moves back to that previous pcpu, it could see those stale TLB
entries and thus access memory incorrectly. The usual symptom of this
is random segfaults in userspace programs in the guest.
To cope with this, we detect when a vcpu is about to start executing on
a thread in a core that is a different core from the last time it
executed. If that is the case, then we mark the core as needing a
TLB flush and then send an interrupt to any thread in the core that is
currently running a vcpu from the same guest. This will get those vcpus
out of the guest, and the first one to re-enter the guest will do the
TLB flush. The reason for interrupting the vcpus executing on the old
core is to cope with the following scenario:
CPU 0 CPU 1 CPU 4
(core 0) (core 0) (core 1)
VCPU 0 runs task X VCPU 1 runs
core 0 TLB gets
entries from task X
VCPU 0 moves to CPU 4
VCPU 0 runs task X
Unmap pages of task X
tlbiel
(still VCPU 1) task X moves to VCPU 1
task X runs
task X sees stale TLB
entries
That is, as soon as the VCPU starts executing on the new core, it
could unmap and tlbiel some page table entries, and then the task
could migrate to one of the VCPUs running on the old core and
potentially see stale TLB entries.
Since the TLB is shared between all the threads in a core, we only
use the bit of kvm->arch.need_tlb_flush corresponding to the first
thread in the core. To ensure that we don't have a window where we
can miss a flush, this moves the clearing of the bit from before the
actual flush to after it. This way, two threads might both do the
flush, but we prevent the situation where one thread can enter the
guest before the flush is finished.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:49 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Make HPT-specific hypercalls return error in radix mode
If the guest is in radix mode, then it doesn't have a hashed page
table (HPT), so all of the hypercalls that manipulate the HPT can't
work and should return an error. This adds checks to make them
return H_FUNCTION ("function not supported").
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds code to keep track of dirty pages when requested (that is,
when memslot->dirty_bitmap is non-NULL) for radix guests. We use the
dirty bits in the PTEs in the second-level (partition-scoped) page
tables, together with a bitmap of pages that were dirty when their
PTE was invalidated (e.g., when the page was paged out). This bitmap
is stored in the first half of the memslot->dirty_bitmap area, and
kvm_vm_ioctl_get_dirty_log_hv() now uses the second half for the
bitmap that gets returned to userspace.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:47 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: MMU notifier callbacks for radix guests
This adapts our implementations of the MMU notifier callbacks
(unmap_hva, unmap_hva_range, age_hva, test_age_hva, set_spte_hva)
to call radix functions when the guest is using radix. These
implementations are much simpler than for HPT guests because we
have only one PTE to deal with, so we don't need to traverse
rmap chains.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:46 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Page table construction and page faults for radix guests
This adds the code to construct the second-level ("partition-scoped" in
architecturese) page tables for guests using the radix MMU. Apart from
the PGD level, which is allocated when the guest is created, the rest
of the tree is all constructed in response to hypervisor page faults.
As well as hypervisor page faults for missing pages, we also get faults
for reference/change (RC) bits needing to be set, as well as various
other error conditions. For now, we only set the R or C bit in the
guest page table if the same bit is set in the host PTE for the
backing page.
This code can take advantage of the guest being backed with either
transparent or ordinary 2MB huge pages, and insert 2MB page entries
into the guest page tables. There is no support for 1GB huge pages
yet.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds code to branch around the parts that radix guests don't
need - clearing and loading the SLB with the guest SLB contents,
saving the guest SLB contents on exit, and restoring the host SLB
contents.
Since the host is now using radix, we need to save and restore the
host value for the PID register.
On hypervisor data/instruction storage interrupts, we don't do the
guest HPT lookup on radix, but just save the guest physical address
for the fault (from the ASDR register) in the vcpu struct.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:44 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Add basic infrastructure for radix guests
This adds a field in struct kvm_arch and an inline helper to
indicate whether a guest is a radix guest or not, plus a new file
to contain the radix MMU code, which currently contains just a
translate function which knows how to traverse the guest page
tables to translate an address.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:43 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Use ASDR for HPT guests on POWER9
POWER9 adds a register called ASDR (Access Segment Descriptor
Register), which is set by hypervisor data/instruction storage
interrupts to contain the segment descriptor for the address
being accessed, assuming the guest is using HPT translation.
(For radix guests, it contains the guest real address of the
access.)
Thus, for HPT guests on POWER9, we can use this register rather
than looking up the SLB with the slbfee. instruction.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:42 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Set process table for HPT guests on POWER9
This adds the implementation of the KVM_PPC_CONFIGURE_V3_MMU ioctl
for HPT guests on POWER9. With this, we can return 1 for the
KVM_CAP_PPC_MMU_HASH_V3 capability.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:41 +0000 (21:21 +1100)]
KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU
This adds two capabilities and two ioctls to allow userspace to
find out about and configure the POWER9 MMU in a guest. The two
capabilities tell userspace whether KVM can support a guest using
the radix MMU, or using the hashed page table (HPT) MMU with a
process table and segment tables. (Note that the MMUs in the
POWER9 processor cores do not use the process and segment tables
when in HPT mode, but the nest MMU does).
The KVM_PPC_CONFIGURE_V3_MMU ioctl allows userspace to specify
whether a guest will use the radix MMU or the HPT MMU, and to
specify the size and location (in guest space) of the process
table.
The KVM_PPC_GET_RMMU_INFO ioctl gives userspace information about
the radix MMU. It returns a list of supported radix tree geometries
(base page size and number of bits indexed at each level of the
radix tree) and the encoding used to specify the various page
sizes for the TLB invalidate entry instruction.
Initially, both capabilities return 0 and the ioctls return -EINVAL,
until the necessary infrastructure for them to operate correctly
is added.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:40 +0000 (21:21 +1100)]
powerpc/64: Allow for relocation-on interrupts from guest to host
With host and guest both using radix translation, it is feasible
for the host to take interrupts that come from the guest with
relocation on, and that is in fact what the POWER9 hardware will
do when LPCR[AIL] = 3. All such interrupts use HSRR0/1 not SRR0/1
except for system call with LEV=1 (hcall).
Therefore this adds the KVM tests to the _HV variants of the
relocation-on interrupt handlers, and adds the KVM test to the
relocation-on system call entry point.
We also instantiate the relocation-on versions of the hypervisor
data storage and instruction interrupt handlers, since these can
occur with relocation on in radix guests.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:39 +0000 (21:21 +1100)]
powerpc/64: Make type of partition table flush depend on partition type
When changing a partition table entry on POWER9, we do a particular
form of the tlbie instruction which flushes all TLBs and caches of
the partition table for a given logical partition ID (LPID).
This instruction has a field in the instruction word, labelled R
(radix), which should be 1 if the partition was previously a radix
partition and 0 if it was a HPT partition. This implements that
logic.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:37 +0000 (21:21 +1100)]
powerpc/64: More definitions for POWER9
This adds definitions for bits in the DSISR register which are used
by POWER9 for various translation-related exception conditions, and
for some more bits in the partition table entry that will be needed
by KVM.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:36 +0000 (21:21 +1100)]
powerpc/64: Enable use of radix MMU under hypervisor on POWER9
To use radix as a guest, we first need to tell the hypervisor via
the ibm,client-architecture call first that we support POWER9 and
architecture v3.00, and that we can do either radix or hash and
that we would like to choose later using an hcall (the
H_REGISTER_PROC_TBL hcall).
Then we need to check whether the hypervisor agreed to us using
radix. We need to do this very early on in the kernel boot process
before any of the MMU initialization is done. If the hypervisor
doesn't agree, we can't use radix and therefore clear the radix
MMU feature bit.
Later, when we have set up our process table, which points to the
radix tree for each process, we need to install that using the
H_REGISTER_PROC_TBL hcall.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:35 +0000 (21:21 +1100)]
powerpc/pseries: Fixes for the "ibm,architecture-vec-5" options
This fixes the byte index values for some of the option bits in
the "ibm,architectur-vec-5" property. The "platform facilities options"
bits are in byte 17 not byte 14, so the upper 8 bits of their
definitions need to be 0x11 not 0x0E. The "sub processor support" option
is in byte 21 not byte 15.
Note none of these options are actually looked up in
"ibm,architecture-vec-5" at this time, so there is no bug.
When checking whether option bits are set, we should check that
the offset of the byte being checked is less than the vector
length that we got from the hypervisor.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 30 Jan 2017 10:21:34 +0000 (21:21 +1100)]
powerpc/64: Don't try to use radix MMU under a hypervisor
Currently, if the kernel is running on a POWER9 processor under a
hypervisor, it will try to use the radix MMU even though it doesn't have
the necessary code to use radix under a hypervisor (it doesn't negotiate
use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The
result is that the guest kernel will crash when it tries to turn on the
MMU.
This fixes it by looking for the /chosen/ibm,architecture-vec-5
property, and if it exists, clears the radix MMU feature bit, before we
decide whether to initialize for radix or HPT. This property is created
by the hypervisor as a result of the guest calling the
ibm,client-architecture-support method to indicate its capabilities, so
it will indicate whether the hypervisor agreed to us using radix.
Systems without a hypervisor may have this property also (for example,
skiboot creates it), so we check the HV bit in the MSR to see whether we
are running as a guest or not. If we are in hypervisor mode, then we can
do whatever we like including using the radix MMU.
The reason for using this property is that in future, when we have
support for using radix under a hypervisor, we will need to check this
property to see whether the hypervisor agreed to us using radix.
Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 27 Jan 2017 04:00:34 +0000 (14:00 +1000)]
KVM: PPC: Book3S: 64-bit CONFIG_RELOCATABLE support for interrupts
64-bit Book3S exception handlers must find the dynamic kernel base
to add to the target address when branching beyond __end_interrupts,
in order to support kernel running at non-0 physical address.
Support this in KVM by branching with CTR, similarly to regular
interrupt handlers. The guest CTR saved in HSTATE_SCRATCH1 and
restored after the branch.
Without this, the host kernel hangs and crashes randomly when it is
running at a non-0 address and a KVM guest is started.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use remove_pagetable() and friends for radix vmemmap removal.
We do not require the special-case handling of vmemmap done in the x86
versions of these functions. This is because vmemmap_free() has already
freed the mapped pages, and calls us with an aligned address range.
So, add a few failsafe WARNs, but otherwise the code to remove physical
mappings is already sufficient for vmemmap.
Reza Arbab [Mon, 16 Jan 2017 19:07:45 +0000 (13:07 -0600)]
powerpc/mm: add radix__remove_section_mapping()
Tear down and free the four-level page tables of physical mappings
during memory hotremove.
Borrow the basic structure of remove_pagetable() and friends from the
identically-named x86 functions. Reduce the frequency of tlb flushes and
page_table_lock spinlocks by only doing them in the outermost function.
There was some question as to whether the locking is needed at all.
Leave it for now, but we could consider dropping it.
Memory must be offline to be removed, thus not in use. So there
shouldn't be the sort of concurrent page walking activity here that
might prompt us to use RCU.
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reza Arbab [Mon, 16 Jan 2017 19:07:43 +0000 (13:07 -0600)]
powerpc/mm: refactor radix physical page mapping
Move the page mapping code in radix_init_pgtable() into a separate
function that will also be used for memory hotplug.
The current goto loop progressively decreases its mapping size as it
covers the tail of a range whose end is unaligned. Change this to a for
loop which can do the same for both ends of the range.
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv: Add support for direct mapped LPC on POWER9
Use the new non-PCI ISA bridge support to expose the POWER9
LPC bus as direct mapped via the ISA IO port range. This
enables direct access via drivers such as 8250
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Documentation:powerpc: Add device-tree bindings for power-mgt
Document the device-tree bindings defining the the properties under
the @power-mgt node in the device tree that describe the idle states
for Linux running on baremetal POWER servers.
These bindings are documented separately instead of using the the
common idle state bindings since the idle-states on POWER servers
are exposed as property arrays where as the common idle state bindings
expect idle-states to be described as nodes.
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
cpuidle:powernv: Add helper function to populate powernv idle states.
In the current code for powernv_add_idle_states, there is a lot of code
duplication while initializing an idle state in powernv_states table.
Add an inline helper function to populate the powernv_states[] table
for a given idle state. Invoke this for populating the "Nap",
"Fastsleep" and the stop states in powernv_add_idle_states.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powernv:stop: Rename pnv_arch300_idle_init to pnv_power9_idle_init
Balbir pointed out that the name of the function pnv_arch300_idle_init
was inconsistent with the names of the variables and functions
pertaining to POWER9 features in book3s_idle.S.
This patch renames pnv_arch300_idle_init to pnv_power9_idle_init.
This patch does not change any behaviour.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently all the low-power idle states are expected to wake up
at reset vector 0x100. Which is why the macro IDLE_STATE_ENTER_SEQ
that puts the CPU to an idle state and never returns.
On ISA v3.0, when the ESL and EC bits in the PSSCR are zero, the CPU
is expected to wake up at the next instruction of the idle
instruction.
This patch adds a new macro named IDLE_STATE_ENTER_SEQ_NORET for the
no-return variant and reuses the name IDLE_STATE_ENTER_SEQ
for a variant that allows resuming operation at the instruction next
to the idle-instruction.
Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Alistair Popple [Tue, 10 Jan 2017 04:41:44 +0000 (15:41 +1100)]
powerpc/powernv: Use OPAL call for TCE kill on NVLink2
Add detection of NPU2 PHBs. NPU2/NVLink2 has a different register
layout for the TCE kill register therefore TCE invalidation should be
done via the OPAL call rather than using the register directly as it
is for PHB3 and NVLink1. This changes TCE invalidation to use the OPAL
call in the case of a NPU2 PHB model.
Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Alistair Popple [Wed, 14 Dec 2016 02:36:51 +0000 (13:36 +1100)]
powerpc/powernv: Initialise nest mmu
POWER9 contains an off core mmu called the nest mmu (NMMU). This is
used by other hardware units on the chip to translate virtual
addresses into real addresses. The unit attempting an address
translation provides the majority of the context required for the
translation request except for the base address of the partition table
(ie. the PTCR) which needs to be programmed into the NMMU.
This patch adds a call to OPAL to set the PTCR for the nest mmu in
opal_init().
Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reza Arbab [Wed, 16 Nov 2016 16:45:03 +0000 (10:45 -0600)]
powerpc/mm: Allow memory hotplug into an offline node
Relax the check preventing us from hotplugging into an offline node.
This limitation was added in commit 482ec7c403d2 ("[PATCH] powerpc numa:
Support sparse online node map") to prevent adding resources to an
uninitialized node.
These days, there is no harm in doing so. The addition will actually
cause the node to be initialized and onlined; add_memory_resource()
calls hotadd_new_pgdat() (if necessary) and node_set_online().
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are chances that multiple CPUs can call crash_fadump() simultaneously
and would start duplicating same info to vmcoreinfo ELF note section. This
causes makedumpfile to fail during kdump capture. One example is,
triggering dumprestart from HMC which sends system reset to all the CPUs at
once.
makedumpfile --dump-dmesg /proc/vmcore
read_vmcoreinfo_basic_info: Invalid data in /tmp/vmcoreinfoyjgxlL: CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971
makedumpfile Failed.
Running makedumpfile --dump-dmesg /proc/vmcore failed (1).
powerpc/mm/hash: Properly mask the ESID bits when building proto VSID
The proto VSID is built using both the MMU context id and effective
segment ID (ESID). We should not have overlapping bits between those.
That could result in us having a VSID collision. With the current code
we missed masking the top bits of the ESID. This implies for kernel
address we ended up using the top 4 bits of the ESID as part of the
proto VSID, which is wrong.
The current code use the top 4 context values (0x7fffc - 0x7ffff) for
the kernel. With those context IDs used for the kernel, we don't run
into VSID collisions because we get the same proto VSID irrespective of
whether we mask the ESID bits or not. eg:
Nicholas Piggin [Wed, 21 Dec 2016 18:29:26 +0000 (04:29 +1000)]
KVM: PPC: Book3S: Move 64-bit KVM interrupt handler out from alt section
A subsequent patch to make KVM handlers relocation-safe makes them
unusable from within alt section "else" cases (due to the way fixed
addresses are taken from within fixed section head code).
Stop open-coding the KVM handlers, and add them both as normal. A more
optimal fix may be to allow some level of alternate feature patching in
the exception macros themselves, but for now this will do.
The TRAMP_KVM handlers must be moved to the "virt" fixed section area
(name is arbitrary) in order to be closer to .text and avoid the dreaded
"relocation truncated to fit" error.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Fri, 13 Jan 2017 17:10:01 +0000 (22:40 +0530)]
powerpc/bpf: Flush the entire JIT buffer
With bpf_jit_binary_alloc(), we allocate at a page granularity and fill
the rest of the space with illegal instructions to mitigate BPF spraying
attacks, while having the actual JIT'ed BPF program at a random location
within the allocated space. Under this scenario, it would be better to
flush the entire allocated buffer rather than just the part containing
the actual program. We already flush the buffer from start to the end of
the BPF program. Extend this to include the illegal instructions after
the BPF program.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Borkmann [Fri, 13 Jan 2017 17:10:00 +0000 (22:40 +0530)]
powerpc/bpf: Remove redundant check for non-null image
We have a check earlier to ensure we don't proceed if image is NULL. As
such, the redundant check can be removed.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
[Added similar changes for classic BPF JIT] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
cxl: Prevent read/write to AFU config space while AFU not configured
During EEH recovery, we deconfigure all AFUs whilst leaving the
corresponding vPHB and virtual PCI device in place.
If something attempts to interact with the AFU's PCI config space (e.g.
running lspci) after the AFU has been deconfigured and before it's
reconfigured, cxl_pcie_{read,write}_config() will read invalid values from
the deconfigured struct cxl_afu and proceed to Oops when they try to
dereference pointers that have been set to NULL during deconfiguration.
Add a rwsem to struct cxl_afu so we can prevent interaction with config
space while the AFU is deconfigured.
Vaibhav Jain [Wed, 4 Jan 2017 06:18:52 +0000 (11:48 +0530)]
cxl: Force psl data-cache flush during device shutdown
This change adds a force psl data cache flush during device shutdown
callback. This should reduce a possibility of psl holding a dirty
cache line while the CAPP is being reinitialized, which may result in
a UE [load/store] machine check error.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Markus Elfring [Sat, 21 Jan 2017 15:10:50 +0000 (16:10 +0100)]
powerpc/mm: Return directly after a failed __copy_from_user() in sys_subpage_prot()
This function already has multiple exit points, so there's no harm
adding another. Although it looks odd to return directly in a function
which takes a lock, we've actually just dropped the mmap_sem in this
code, so there's really no reason to go via a label. And it means we can
drop the unhelpfully named out2 label.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Markus Elfring [Sat, 21 Jan 2017 14:30:15 +0000 (15:30 +0100)]
powerpc/sstep: Return directly after a failed address_ok() in emulate_step()
Setting err and going to ldst_done just returns 0, without using err, so
just return 0 directly. We already do that for other call sites in this
function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Mon, 23 Jan 2017 22:49:54 +0000 (09:49 +1100)]
powerpc/kernel: Fix unbalanced refcount on RTAS device node
The RTAS device-tree node's refcount has been increased by one in
the function call of_find_node_by_name(), but it's missed to be
decreased by one in the error path. It leads to unbalanced refcount
on RTAS device-tree node.
This fixes above issue by decreasing RTAS device-tree node's refcount
in error path.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Thu, 3 Nov 2016 05:15:42 +0000 (16:15 +1100)]
powerpc/64: Use optimized checksum routines on little-endian
Currently we have optimized hand-coded assembly checksum routines for
big-endian 64-bit systems, but for little-endian we use the generic C
routines. This modifies the optimized routines to work for
little-endian. With this, we no longer need to enable
CONFIG_GENERIC_CSUM. This also fixes a couple of comments in
checksum_64.S so they accurately reflect what the associated instruction
does.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Use the more common __BIG_ENDIAN__] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Thu, 3 Nov 2016 05:10:55 +0000 (16:10 +1100)]
powerpc/64: Fix checksum folding in csum_tcpudp_nofold and ip_fast_csum_nofold
These functions compute an IP checksum by computing a 64-bit sum and
folding it to 32 bits (the "nofold" in their names refers to folding
down to 16 bits). However, doing (u32) (s + (s >> 32)) is not
sufficient to fold a 64-bit sum to 32 bits correctly. The addition
can produce a carry out from bit 31, which needs to be added in to
the sum to produce the correct result.
To fix this, we copy the from64to32() function from lib/checksum.c
and use that.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Joel Stanley [Fri, 13 Jan 2017 03:53:49 +0000 (14:23 +1030)]
powerpc/powernv: Report size of OPAL memcons log
The OPAL memory console is reported to be size zero, as we do not
initialise the struct attr with any size information due to the size
being variable. This leads users to think that the console is empty.
Instead report the maximum size.
Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/mm/4k: don't allocate larger pmd page table for 4k
We now support THP with both 64k and 4K page size configuration
for radix. (hash only support THP with 64K page size). Hence we
will have CONFIG_TRANSPARENT_HUGEPAGE enabled for both PPC_64K
and PPC_4K config. Since we only need large pmd page table
with hash configuration (to store the slot information
in the second half of the table) restrict the large pmd page table
to THP and 64K configs.
Linus Torvalds [Sun, 22 Jan 2017 20:47:48 +0000 (12:47 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"Restore the retrigger callbacks in the IO APIC irq chips. That
addresses a long standing regression which got introduced with the
rewrite of the x86 irq subsystem two years ago and went unnoticed so
far"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Restore IO-APIC irq_chip retrigger callback
Linus Torvalds [Sun, 22 Jan 2017 20:40:09 +0000 (12:40 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost fixes from Michael Tsirkin:
"Random fixes and cleanups that accumulated over the time"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: virtio: constify virtio_config_ops structures
virtio/s390: add missing \n to end of dev_err message
virtio/s390: support READ_STATUS command for virtio-ccw
tools/virtio/ringtest: tweaks for s390
tools/virtio/ringtest: fix run-on-all.sh for offline cpus
virtio_console: fix a crash in config_work_handler
vhost/scsi: silence uninitialized variable warning
vhost: scsi: constify target_core_fabric_ops structures
Linus Torvalds [Sun, 22 Jan 2017 20:36:47 +0000 (12:36 -0800)]
Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui:
- fix a regression that thermal zone dynamically allocated sysfs
attributes are freed before they're removed, which is introduced in
4.10-rc1 (Jacob von Chorus)
- fix a boot warning because deprecated hwmon API is used (Fabio
Estevam)
- a couple of fixes for rockchip thermal driver (Brian Norris, Caesar
Wang)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: rockchip: fixes the conversion table
thermal: core: move tz->device.groups cleanup to thermal_release
thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()
thermal: rockchip: handle set_trips without the trip points
thermal: rockchip: optimize the conversion table
thermal: rockchip: fixes invalid temperature case
thermal: rockchip: don't pass table structs by value
thermal: rockchip: improve conversion error messages
Linus Torvalds [Sun, 22 Jan 2017 03:01:06 +0000 (19:01 -0800)]
Merge tag 'usb-4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few small USB fixes for 4.10-rc5.
Most of these are gadget/dwc2 fixes for reported issues, all of these
have been in linux-next for a while. The last one is a single xhci
WARN_ON removal to handle an issue that the dwc3 driver is hitting in
the 4.10-rc tree. The warning is harmless and needs to be removed, and
a "real" fix that is more complex will show up in 4.11-rc1 for this
device.
That last patch hasn't been in linux-next yet due to the weekend
timing, but it's a "simple" WARN_ON() removal so what could go wrong?
:)"
Famous last words.
* tag 'usb-4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: remove WARN_ON if dma mask is not set for platform devices
usb: dwc2: host: fix Wmaybe-uninitialized warning
usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value
usb: gadget: udc: atmel: remove memory leak
usb: dwc3: exynos fix axius clock error path to do cleanup
usb: dwc2: Avoid suspending if we're in gadget mode
usb: dwc2: use u32 for DT binding parameters
usb: gadget: f_fs: Fix iterations on endpoints.
usb: dwc2: gadget: Fix DMA memory freeing
usb: gadget: composite: Fix function used to free memory
Linus Torvalds [Sun, 22 Jan 2017 02:53:06 +0000 (18:53 -0800)]
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"Two fixes:
- a regression fix for the multiple-pmem-namespace-per-region support
added in 4.9. Even if an existing environment is not using that
feature the act of creating and a destroying a single namespace
with the ndctl utility will lead to the proliferation of extra
unwanted namespace devices.
- a fix for the error code returned from the pmem driver when the
memcpy_mcsafe() routine returns -EFAULT. Btrfs seems to be the only
block I/O consumer that tries to parse the meaning of the error
code when it is non-zero.
Neither of these fixes are critical, the namespace leak is awkward in
that it can cause device naming to change and complicates debugging
namespace initialization issues. The error code fix is included out of
caution for what other consumers might be expecting -EIO for block I/O
errors"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, namespace: fix pmem namespace leak, delete when size set to zero
pmem: return EIO on read_pmem() failure
Linus Torvalds [Sun, 22 Jan 2017 02:46:45 +0000 (18:46 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for Samsung Exynos524x SoCs where recent IOMMU patches have
caused some of these clocks to turn off when they were always left on
before"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk/samsung: exynos542x: mark some clocks as critical
Linus Torvalds [Sun, 22 Jan 2017 02:07:40 +0000 (18:07 -0800)]
Merge tag 'arc-4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- more intc updates [Yuriv]
- fix module build when unwinder is turned off
- IO Coherency Programming model updates
- other miscellaneous
* tag 'arc-4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: Revert "ARC: mm: IOC: Don't enable IOC by default"
ARC: mm: split arc_cache_init to allow __init reaping of bulk
ARCv2: IOC: Use actual memory size to setup aperture size
ARCv2: IOC: Adhere to progamming model guidelines to avoid DMA corruption
ARCv2: IOC: refactor the IOC and SLC operations into own functions
ARC: module: Fix !CONFIG_ARC_DW2_UNWIND builds
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
ARCv2: IRQ: Call entry/exit functions for chained handlers in MCIP
ARC: IRQ: Use hwirq instead of virq in mask/unmask
ARC: mmu: clarify the MMUv3 programming model
Linus Torvalds [Sun, 22 Jan 2017 01:58:45 +0000 (17:58 -0800)]
Merge tag 'powerpc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two fixes for fallout from the hugetlb changes we merged this cycle.
Ten other fixes, four only affect Power9, and the rest are a bit of a
mixture though nothing terrible.
Thanks to: Aneesh Kumar K.V, Anton Blanchard, Benjamin Herrenschmidt,
Dave Martin, Gavin Shan, Madhavan Srinivasan, Nicholas Piggin, Reza
Arbab"
* tag 'powerpc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Ignore reserved field in DCSR and PVR reads and writes
powerpc/ptrace: Preserve previous TM fprs/vsrs on short regset write
powerpc/ptrace: Preserve previous fprs/vsrs on short regset write
powerpc/perf: Use MSR to report privilege level on P9 DD1
selftest/powerpc: Wrong PMC initialized in pmc56_overflow test
powerpc/eeh: Enable IO path on permanent error
powerpc/perf: Fix PM_BRU_CMPL event code for power9
powerpc/mm: Fix little-endian 4K hugetlb
powerpc/mm/hugetlb: Don't panic when we don't find the default huge page size
powerpc: Fix pgtable pmd cache init
powerpc/icp-opal: Fix missing KVM case and harden replay
powerpc/mm: Fix memory hotplug BUG() on radix
Linus Torvalds [Fri, 20 Jan 2017 22:19:34 +0000 (14:19 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- Fix for timer setup on VHE machines
- Drop spurious warning when the timer races against the vcpu running
again
- Prevent a vgic deadlock when the initialization fails (for stable)
s390:
- Fix a kernel memory exposure (for stable)
x86:
- Fix exception injection when hypercall instruction cannot be
patched"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: do not expose random data via facility bitmap
KVM: x86: fix fixing of hypercalls
KVM: arm/arm64: vgic: Fix deadlock on error handling
KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systems
KVM: arm/arm64: Fix occasional warning from the timer work function
Linus Torvalds [Fri, 20 Jan 2017 22:17:04 +0000 (14:17 -0800)]
Merge branch 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux
Pull SCSI target fixes from Bart Van Assche:
- two small fixes for the ibmvscsis driver
- ten patches with bug fixes for the target mode of the qla2xxx driver
- four patches that avoid that the "sparse" and "smatch" static
analyzer tools report false positives for the qla2xxx code base
* 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux:
qla2xxx: Disable out-of-order processing by default in firmware
qla2xxx: Fix erroneous invalid handle message
qla2xxx: Reduce exess wait during chip reset
qla2xxx: Terminate exchange if corrupted
qla2xxx: Fix crash due to null pointer access
qla2xxx: Collect additional information to debug fw dump
qla2xxx: Reset reserved field in firmware options to 0
qla2xxx: Set tcm_qla2xxx version to automatically track qla2xxx version
qla2xxx: Include ATIO queue in firmware dump when in target mode
qla2xxx: Fix wrong IOCB type assumption
qla2xxx: Avoid that building with W=1 triggers complaints about set-but-not-used variables
qla2xxx: Move two arrays from header files to .c files
qla2xxx: Declare an array with file scope static
qla2xxx: Fix indentation
ibmvscsis: Fix sleeping in interrupt context
ibmvscsis: Fix max transfer length
Linus Torvalds [Fri, 20 Jan 2017 20:28:02 +0000 (12:28 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just two small fixes for this -rc.
One is just killing an unused variable from Keith, but the other
fixes a performance regression for nbd in this series, where we
inadvertently flipped when we set MSG_MORE when outputting data"
* 'for-linus' of git://git.kernel.dk/linux-block:
nbd: only set MSG_MORE when we have more to send
blk-mq: Remove unused variable
Linus Torvalds [Fri, 20 Jan 2017 20:25:11 +0000 (12:25 -0800)]
Merge tag 'spi-fix-v4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The usual small smattering of driver specific fixes. A few bits that
stand out here:
- the R-Car patches adding fallbacks are just adding new compatible
strings to the driver so that device trees are written in a more
robustly future proof fashion, this isn't strictly a fix but it's
just new IDs and it's better to get it into mainline sooner to
improve the ABI
- the DesignWare "switch to new API part 2" patch is actually a
misleadingly titled fix for a bit that got missed in the original
conversion"
* tag 'spi-fix-v4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: davinci: use dma_mapping_error()
spi: spi-axi: Free resources on error path
spi: pxa2xx: add missed break
spi: dw-mid: switch to new dmaengine_terminate_* API (part 2)
spi: dw: Make debugfs name unique between instances
spi: sh-msiof: Do not use C++ style comment
spi: armada-3700: Set mode bits correctly
spi: armada-3700: fix unsigned compare than zero on irq
spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings
spi: SPI_FSL_DSPI should depend on HAS_DMA
Linus Torvalds [Fri, 20 Jan 2017 20:15:48 +0000 (12:15 -0800)]
Merge tag 'ceph-for-4.10-rc5' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Three filesystem endianness fixes (one goes back to the 2.6 era, all
marked for stable) and two fixups for this merge window's patches"
* tag 'ceph-for-4.10-rc5' of git://github.com/ceph/ceph-client:
ceph: fix bad endianness handling in parse_reply_info_extra
ceph: fix endianness bug in frag_tree_split_cmp
ceph: fix endianness of getattr mask in ceph_d_revalidate
libceph: make sure ceph_aes_crypt() IV is aligned
ceph: fix ceph_get_caps() interruption
Linus Torvalds [Fri, 20 Jan 2017 19:56:29 +0000 (11:56 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Fix two regressions, one introduced in 4.9 and a less recent one in
4.2"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix time_to_jiffies nsec sanity check
fuse: clear FR_PENDING flag when moving requests out of pending queue
Linus Torvalds [Fri, 20 Jan 2017 19:47:18 +0000 (11:47 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of 12 fixes including the mpt3sas one that was causing
hangs on ATA passthrough.
The others are a couple of zoned block device fixes, a SAS device
detection bug which lead to SATA drives not being matched to bays, two
qla2xxx MSI fixes, a qla2xxx req for rsp confusion caused by cut and
paste, and a few other minor fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: fix hang on ata passthrough commands
scsi: lpfc: Set elsiocb contexts to NULL after freeing it
scsi: sd: Ignore zoned field for host-managed devices
scsi: sd: Fix wrong DPOFUA disable in sd_read_cache_type
scsi: bfa: fix wrongly initialized variable in bfad_im_bsg_els_ct_request()
scsi: ses: Fix SAS device detection in enclosure
scsi: libfc: Fix variable name in fc_set_wwpn
scsi: lpfc: avoid double free of resource identifiers
scsi: qla2xxx: remove irq_affinity_notifier
scsi: qla2xxx: fix MSI-X vector affinity
scsi: qla2xxx: Fix apparent cut-n-paste error.
scsi: qla2xxx: Get mutex lock before checking optrom_state
Linus Torvalds [Fri, 20 Jan 2017 19:44:47 +0000 (11:44 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- avoid potential stack information leak via the ptrace ABI caused by
uninitialised variables
- SWIOTLB DMA API fall-back allocation fix when the SWIOTLB buffer is
not initialised (all RAM is suitable for 32-bit DMA masks)
- fix the bad_mode function returning for unhandled exceptions coming
from user space
- fix name clash in __page_to_voff()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: avoid returning from bad_mode
arm64/ptrace: Reject attempts to set incomplete hardware breakpoint fields
arm64/ptrace: Avoid uninitialised struct padding in fpr_set()
arm64/ptrace: Preserve previous registers for short regset write
arm64/ptrace: Preserve previous registers for short regset write
arm64/ptrace: Preserve previous registers for short regset write
arm64: mm: avoid name clash in __page_to_voff()
arm64: Fix swiotlb fallback allocation
KVM: s390: do not expose random data via facility bitmap
kvm_s390_get_machine() populates the facility bitmap by copying bytes
from the host results that are stored in a 256 byte array in the prefix
page. The KVM code does use the size of the target buffer (2k), thus
copying and exposing unrelated kernel memory (mostly machine check
related logout data).
Let's use the size of the source buffer instead. This is ok, as the
target buffer will always be greater or equal than the source buffer as
the KVM internal buffers (and thus S390_ARCH_FAC_LIST_SIZE_BYTE) cover
the maximum possible size that is allowed by STFLE, which is 256
doublewords. All structures are zero allocated so we can leave bytes
256-2047 unchanged.
Add a similar fix for kvm_arch_init_vm().
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[found with smatch] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: stable@vger.kernel.org Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Mathias Nyman [Fri, 20 Jan 2017 13:38:24 +0000 (15:38 +0200)]
xhci: remove WARN_ON if dma mask is not set for platform devices
The warn on is a bit too much, we will anyway set the dma mask if not set
previously.
The main reason for this fix is that 4.10-rc1 has a dwc3 change that
pass a parent sysdev dev pointer instead of setting the dma mask of
its xhci platform device. xhci platform driver can then get more
attributes from the sysdev than just the dma mask.
The usb core and xhci changes are not yet in 4.10, and a fix like
this was preferred instead of taking those big changes this late in
the rc-cycle.
Anton Blanchard [Thu, 19 Jan 2017 03:19:10 +0000 (14:19 +1100)]
powerpc: Ignore reserved field in DCSR and PVR reads and writes
IBM bit 31 (for the rest of us - bit 0) is a reserved field in the
instruction definition of mtspr and mfspr. Hardware is encouraged to
(and does) ignore it.
As a result, if userspace executes an mtspr DSCR with the reserved bit
set, we get a DSCR facility unavailable exception. The kernel fails to
match against the expected value/mask, and we silently return to
userspace to try and re-execute the same mtspr DSCR instruction. We
loop forever until the process is killed.
We should do something here, and it seems mirroring what hardware does
is the better option vs killing the process. While here, relax the
matching of mfspr PVR too.
Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Dave Martin [Thu, 5 Jan 2017 16:50:57 +0000 (16:50 +0000)]
powerpc/ptrace: Preserve previous TM fprs/vsrs on short regset write
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the check pointed registers, the thread's old check pointed
registers are preserved.
Fixes: 9d3918f7c0e5 ("powerpc/ptrace: Enable support for NT_PPC_CVSX") Fixes: 19cbcbf75a0c ("powerpc/ptrace: Enable support for NT_PPC_CFPR") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Dave Martin [Thu, 5 Jan 2017 16:50:57 +0000 (16:50 +0000)]
powerpc/ptrace: Preserve previous fprs/vsrs on short regset write
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Fixes: c6e6771b87d4 ("powerpc: Introduce VSX thread_struct and CONFIG_VSX") Cc: stable@vger.kernel.org # v2.6.27+ Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds [Fri, 20 Jan 2017 00:40:03 +0000 (16:40 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We've been sitting on fixes for a while, and they keep trickling in at
a low rate. Nothing in here comes across as particularly scary or
noteworthy, for the most part it's a large collection of small DT
tweaks"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (24 commits)
ARM: dts: da850-evm: fix read access to SPI flash
ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV
ARM64: dts: meson-gxbb-odroidc2: Disable SCPI DVFS
ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.
ARM: dts: NSP: Fix DT ranges error
ARM: multi_v7_defconfig: set bcm47xx watchdog
ARM: multi_v7_defconfig: fix config typo
ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node
soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe()
ARM: ux500: fix prcmu_is_cpu_in_wfi() calculation
ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmc
ARM: dts: sun8i: Support DTB build for NanoPi M1
ARM: dts: sun6i: hummingbird: Enable display engine again
ARM: dts: sun6i: Disable display pipeline by default
ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus" part 3
ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl init
ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init
ARM: OMAP1: DMA: Correct the number of logical channels
ARM: dts: am335x-icev2: Remove the duplicated pinmux setting
ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate
...
Linus Torvalds [Fri, 20 Jan 2017 00:33:00 +0000 (16:33 -0800)]
Merge tag 'xfs-for-linux-4.10-rc5-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"I have a few more patches this week -- one to make the behavior of a
quota id ioctl consistent with the other filesystems, and the rest
improve validation of i_mode & i_size values coming into xfs so that
we don't read off the ends of arrays or crash when handed garbage disk
data.
Summary:
- inode i_mode sanitization
- prevent overflows in getnextquota
- minor build fixes"
* tag 'xfs-for-linux-4.10-rc5-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix xfs_mode_to_ftype() prototype
xfs: don't wrap ID in xfs_dq_get_next_id
xfs: sanity check inode di_mode
xfs: sanity check inode mode when creating new dentry
xfs: replace xfs_mode_to_ftype table with switch statement
xfs: add missing include dependencies to xfs_dir2.h
xfs: sanity check directory inode di_size
xfs: make the ASSERT() condition likely
Fabien Parent [Tue, 17 Jan 2017 12:57:42 +0000 (13:57 +0100)]
ARM: dts: da850-evm: fix read access to SPI flash
Read access to the SPI flash are broken on da850-evm, i.e. the data
read is not what is actually programmed on the flash.
According to the datasheet for the M25P64 part present on the da850-evm,
if the SPI frequency is higher than 20MHz then the READ command is not
usable anymore and only the FAST_READ command can be used to read data.
This commit specifies in the DTS that we should use FAST_READ command
instead of the READ command.
Cc: stable@vger.kernel.org Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Fabien Parent <fparent@baylibre.com>
[nsekhar@ti.com: subject line adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Declare virtio_config_ops structure as const as it is only stored in the
config field of a virtio_device structure. This field is of type const, so
virtio_config_ops structures having this property can be declared const.
Done using Coccinelle:
File size before and after applying the patch remains the same.
text data bss dec hex filename
9235 296 32928 42459 a5db drivers/s390/virtio/virtio_ccw.o
Colin Ian King [Tue, 27 Sep 2016 20:08:44 +0000 (13:08 -0700)]
virtio/s390: add missing \n to end of dev_err message
Trival fix, dev_err message is missing a \n, so add it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20160927200844.16008-1-colin.king@canonical.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Pierre Morel [Fri, 28 Aug 2015 09:09:32 +0000 (11:09 +0200)]
virtio/s390: support READ_STATUS command for virtio-ccw
As virtio-1 introduced the possibility of the device manipulating the
status byte, revision 2 of the virtio-ccw transport introduced a means
of getting the status byte from the device via READ_STATUS. Let's wire
it up for revisions >= 2 and fall back to returning the stored status
byte if not supported.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Halil Pasic [Mon, 29 Aug 2016 16:25:22 +0000 (18:25 +0200)]
tools/virtio/ringtest: fix run-on-all.sh for offline cpus
Since ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work
without /dev/cpu") run-on-all.sh uses seq 0 $HOST_AFFINITY as the list
of ids of the CPUs to run the command on (assuming ids of online CPUs
are consecutive and start from 0), where $HOST_AFFINITY is the highest
CPU id in the system previously determined using lscpu. This can fail
on systems with offline CPUs.
Instead let's use lscpu to determine the list of online CPUs.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Fixes: ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work without
/dev/cpu") Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
G. Campana [Thu, 19 Jan 2017 21:37:46 +0000 (23:37 +0200)]
virtio_console: fix a crash in config_work_handler
Using control_work instead of config_work as the 3rd argument to
container_of results in an invalid portdev pointer. Indeed, the work
structure is initialized as below:
It leads to a crash when portdev->vdev is dereferenced later. This
bug
is triggered when the guest uses a virtio-console without multiport
feature and receives a config_changed virtio interrupt.
Signed-off-by: G. Campana <gcampana@quarkslab.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If "head == vq->num" is true on the first iteration then "out" and "in"
aren't initialized. We handle that a few lines after the printk. I was
tempted to just delete the pr_debug() but I decided to just initialize
them to zero instead.
Also checkpatch.pl complains if variables are declared as just
"unsigned" without the "int".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Declare target_core_fabric_ops strucrues as const as they are only
passed as an argument to the functions target_register_template and
target_unregister_template. The arguments are of type const struct
target_core_fabric_ops *, so target_core_fabric_ops structures having
this property can be declared const.
Done using Coccinelle:
Josef Bacik [Thu, 19 Jan 2017 21:08:49 +0000 (16:08 -0500)]
nbd: only set MSG_MORE when we have more to send
A user noticed that write performance was horrible over loopback and we
traced it to an inversion of when we need to set MSG_MORE. It should be
set when we have more bvec's to send, not when we are on the last bvec.
This patch made the test go from 20 iops to 78k iops.
Signed-off-by: Josef Bacik <jbacik@fb.com> Fixes: 429a787be679 ("nbd: fix use-after-free of rq/bio in the xmit path") Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Thu, 19 Jan 2017 17:59:46 +0000 (09:59 -0800)]
Merge tag 'pci-v4.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- recognize that a PCI-to-PCIe bridge originates a PCIe hierarchy, so
we enumerate that hierarchy correctly
- X-Gene: fix a change merged for v4.10 that broke MSI
- Keystone: avoid reading undefined registers, which can cause
asynchronous external aborts
- Supermicro X8DTH-i/6/iF/6F: ignore broken _CRS that caused us to
change (and break) existing I/O port assignments
* tag 'pci-v4.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/MSI: pci-xgene-msi: Fix CPU hotplug registration handling
PCI: Enumerate switches below PCI-to-PCIe bridges
x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F
PCI: designware: Check for iATU unroll only on platforms that use ATU
Linus Torvalds [Thu, 19 Jan 2017 17:46:10 +0000 (09:46 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull two s390 bug fixes from Martin Schwidefsky:
"Two changes, the first is a fix to add a missing memory clobber to the
inline assembly to load control registers. This has not caused any
issues so far, but who knows what code gcc will generate in future
versions.
The second change is an update for the default configurations. This
includes CONFIG_BUG_ON_DATA_CORRUPTION=y, we want this to be enabled
for s390. The usual approach to debug problems on production systems
is to use crash on a system dump and for us avoiding data corruptions
is priority one"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/ctl_reg: make __ctl_load a full memory barrier