Bjorn Helgaas [Wed, 31 Jan 2018 16:21:33 +0000 (10:21 -0600)]
Merge remote-tracking branch 'lorenzo/pci/cadence' into next
* lorenzo/pci/cadence:
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
PCI: endpoint: Fix EPF device name to support multi-function devices
PCI: endpoint: Add the function number as argument to EPC ops
PCI: cadence: Add host driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
PCI: Add vendor ID for Cadence
PCI: Add generic function to probe PCI host controllers
PCI: generic: fix missing call of pci_free_resource_list()
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Regroup all PCI related entries into drivers/pci/Makefile
Bjorn Helgaas [Wed, 31 Jan 2018 16:13:09 +0000 (10:13 -0600)]
Merge branch 'pci/virtualization' into next
* pci/virtualization:
PCI: Expose ari_enabled in sysfs
PCI: Add function 1 DMA alias quirk for Marvell 9128
PCI: Mark Ceton InfiniTV4 INTx masking as broken
xen/pci: Use acpi_noirq_set() helper to avoid #ifdef
Bjorn Helgaas [Wed, 31 Jan 2018 16:12:56 +0000 (10:12 -0600)]
Merge branch 'pci/resource' into next
* pci/resource:
PCI: tegra: Remove PCI_REASSIGN_ALL_BUS use on Tegra
resource: Set type when reserving new regions
resource: Set type of "reserve=" user-specified resources
irqchip/i8259: Set I/O port resource types correctly
powerpc: Set I/O port resource types correctly
MIPS: Set I/O port resource types correctly
vgacon: Set VGA struct resource types
PCI: Use dev_info() rather than dev_err() for ROM validation
PCI: Remove PCI_REASSIGN_ALL_RSRC use on arm and arm64
PCI: Remove sysfs resource mmap warning
Bjorn Helgaas [Wed, 31 Jan 2018 16:10:32 +0000 (10:10 -0600)]
Merge branch 'pci/misc' into next
* pci/misc:
PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build
PCI: Add wrappers for dev_printk()
PCI: Remove unnecessary messages for memory allocation failures
PCI: Add #defines for Completion Timeout Disable feature
hinic: Replace PCI pool old API
net: e100: Replace PCI pool old API
block: DAC960: Replace PCI pool old API
MAINTAINERS: Include more PCI files
PCI: Remove unneeded kallsyms include
powerpc/pci: Unroll two pass loop when scanning bridges
powerpc/pci: Use for_each_pci_bridge() helper
Bjorn Helgaas [Wed, 31 Jan 2018 16:10:30 +0000 (10:10 -0600)]
Merge branch 'pci/enumeration' into next
* pci/enumeration:
RDMA/qedr: Use pci_enable_atomic_ops_to_root()
PCI: Add pci_enable_atomic_ops_to_root()
PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports
Bjorn Helgaas [Wed, 31 Jan 2018 16:10:28 +0000 (10:10 -0600)]
Merge branch 'pci/dpc' into next
* pci/dpc:
PCI/DPC: Reformat DPC register definitions
PCI/DPC: Add and use DPC Status register field definitions
PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
PCI/DPC: Remove unnecessary RP PIO register structs
PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
PCI/DPC: Make RP PIO log size check more generic
PCI/DPC: Rename local "status" to "dpc_status"
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
PCI/DPC: Process RP PIO details only if RP PIO extensions supported
PCI/DPC: Read RP PIO Log Size once at probe
PCI/DPC: Rename struct dpc_dev.rp to rp_extensions
PCI/DPC: Add local variable for DPC capability offset
PCI/DPC: Rename interrupt_event_handler() to dpc_work()
PCI/DPC: Fix interrupt message number print
PCI/DPC: Enable DPC only if AER is available
PCI/DPC: Fix shared interrupt handling
Cyrille Pitchen [Tue, 30 Jan 2018 20:56:59 +0000 (21:56 +0100)]
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
This patch adds support to the Cadence PCIe controller in endpoint mode.
Since pieces of source code are shared with the host driver (Root
Complex mode), we create a new directory under drivers/pci dedicated to
the Cadence PCIe controller. The common code is placed into
drivers/pci/cadence/pcie-cadence.c and used by both the host and
endpoint controller drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cyrille Pitchen [Tue, 30 Jan 2018 20:56:52 +0000 (21:56 +0100)]
PCI: Add generic function to probe PCI host controllers
This patchs moves generic source code from
drivers/pci/host/pci-host-common.c into drivers/pci/probe.c.
Indeed the extracted lines of code were duplicated by many host
controller drivers. Regrouping them into a generic function gives a
change to properly share this code without introducing a useless
dependency to PCI_HOST_COMMON, which selects PCI_ECAM when not needed by
most host controller drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cyrille Pitchen [Tue, 30 Jan 2018 20:56:50 +0000 (21:56 +0100)]
PCI: OF: Add generic function to parse and allocate PCI resources
The patch moves the gen_pci_parse_request_of_pci_ranges() function from
drivers/pci/host/pci-host-common.c into drivers/pci/of.c to easily share
common source code between PCI host drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cyrille Pitchen [Tue, 30 Jan 2018 20:56:49 +0000 (21:56 +0100)]
PCI: Regroup all PCI related entries into drivers/pci/Makefile
Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries
from drivers/Makefile into drivers/pci/Makefile.
Since we don't want to introduce any dependency between CONFIG_PCI and
CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile.
Hence all Makefiles in drivers/pci/ were updated accordingly so no file is
compiled when CONFIG_PCI is not defined.
Also, we add a comment to reinforce that EPC and EPF libraries must be
initialized before their users. Hence built-in EPC drivers, such as
those of Designware, are linked after the endpoint core libraries.
Finally, we add another comment to explain why obj-y has been chosen
instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Bjorn Helgaas [Tue, 16 Jan 2018 23:34:12 +0000 (17:34 -0600)]
PCI/DPC: Reformat DPC register definitions
Reformat DPC register definitions to follow the convention that register
field masks indicate the register width, e.g., a field of a 16-bit register
uses a mask of 4 hex digits, with leading zeros included as needed.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Bjorn Helgaas [Tue, 30 Jan 2018 18:12:48 +0000 (12:12 -0600)]
PCI/DPC: Remove unnecessary RP PIO register structs
We read and immediately print the RP PIO log registers. We don't save
them, so there's no need to define structs for them. Remove the structs
and read the registers into local variables instead. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Bjorn Helgaas [Tue, 30 Jan 2018 18:12:38 +0000 (12:12 -0600)]
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
Separating dpc_rp_pio_print_error() doesn't really provide any useful
abstraction, so squash it into its caller, dpc_rp_pio_get_info(). No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Bjorn Helgaas [Tue, 30 Jan 2018 18:12:33 +0000 (12:12 -0600)]
PCI/DPC: Make RP PIO log size check more generic
In dpc_probe(), we set dpc->rp_log_size to zero if we think the hardware
reports an invalid size. In this case, we could have dpc->rp_extensions
set but dpc->rp_log_size == 0, and we should print the basic RP PIO
registers but not the variable-size portion. We already checked for
dpc->rp_log_size < 4 above, so this patch is just for consistency of style.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Bjorn Helgaas [Tue, 30 Jan 2018 18:12:27 +0000 (12:12 -0600)]
PCI/DPC: Rename local "status" to "dpc_status"
In dpc_rp_pio_get_info() rename the local "status" variable to
"dpc_status". This is to make room for another variable named "status" in
a subsequent patch. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Bjorn Helgaas [Tue, 30 Jan 2018 00:57:21 +0000 (18:57 -0600)]
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
Separating dpc_rp_pio_print_tlp_header() doesn't really provide any useful
abstraction, so squash it into its caller, dpc_rp_pio_print_error(). No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Bjorn Helgaas [Fri, 26 Jan 2018 13:45:18 +0000 (07:45 -0600)]
PCI/DPC: Process RP PIO details only if RP PIO extensions supported
The RP PIO registers (status, mask, severity, etc) are only implemented if
the "RP Extensions for DPC" bit is set in the DPC Capabilities register.
Previously we called dpc_process_rp_pio_error(), which reads and decodes
those RP PIO registers, whenever the DPC Status register indicated an "RP
PIO error" (Trigger Reason == 3 and Trigger Reason Extension == 0).
It does seem reasonable to assume that DPC Status would only indicate an RP
PIO error if the RP extensions are supported, but PCIe r4.0, sec 7.9.15.4,
is actually not explicit about that: it does not say "Trigger Reason
Extension == 0 is valid only for Root Ports that support RP Extensions for
DPC."
Check whether the RP Extensions for DPC are supported before trying to read
the RP PIO registers.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Bjorn Helgaas [Thu, 25 Jan 2018 18:49:27 +0000 (12:49 -0600)]
PCI/DPC: Read RP PIO Log Size once at probe
The RP PIO Log Size is a read-only field in the DPC Capability, so it is
constant and known at probe-time, but previously we read it every time we
processed an RP PIO error.
Read it once in dpc_probe() (if the RP Extensions for DPC are supported)
and remember the size in struct dpc_dev. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Bjorn Helgaas [Fri, 26 Jan 2018 21:46:38 +0000 (15:46 -0600)]
PCI/DPC: Rename struct dpc_dev.rp to rp_extensions
"rp" is ambiguous: it might mean "this DPC device is a Root Port." But in
fact, it means "this DPC device is a Root Port *and* it supports a set of
DPC Extensions."
Rename "rp" to "rp_extensions" to make this more clear. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Bjorn Helgaas [Fri, 26 Jan 2018 13:18:56 +0000 (07:18 -0600)]
PCI/DPC: Rename interrupt_event_handler() to dpc_work()
Rename interrupt_event_handler() to dpc_work() so there's more useful
information in stack traces and similar situations. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Keith Busch [Wed, 17 Jan 2018 05:22:05 +0000 (22:22 -0700)]
PCI/DPC: Fix interrupt message number print
The interrupt message number is the first 5 bits, but the driver was
masking only the first 4 bits. Fix that by using the existing
define.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: remove reformatting (done by another patch)] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Keith Busch [Wed, 24 Jan 2018 23:03:18 +0000 (17:03 -0600)]
PCI/DPC: Enable DPC only if AER is available
The "Determination of DPC Control" implementation note in PCIe r4.0, sec
6.1.10, recommends the operating system always link DPC control to the
control of AER, as the two functionalities are strongly connected.
To avoid conflicts over whether platform firmware or the OS controls DPC,
enable DPC only if AER is enabled in the OS, and the device's error
handling does not have firmware-first AER handling.
Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Jay Cornwall [Fri, 5 Jan 2018 00:44:59 +0000 (19:44 -0500)]
PCI: Add pci_enable_atomic_ops_to_root()
The Atomic Operations feature (PCIe r4.0, sec 6.15) allows atomic
transctions to be requested by, routed through and completed by PCIe
components. Routing and completion do not require software support.
Component support for each is detectable via the DEVCAP2 register.
A Requester may use AtomicOps only if its PCI_EXP_DEVCTL2_ATOMIC_REQ is
set. This should be set only if the Completer and all intermediate routing
elements support AtomicOps.
A concrete example is the AMD Fiji-class GPU (which is capable of making
AtomicOp requests), below a PLX 8747 switch (advertising AtomicOp routing)
with a Haswell host bridge (advertising AtomicOp completion support).
Add pci_enable_atomic_ops_to_root() for per-device control over AtomicOp
requests. This checks to be sure the Root Port supports completion of the
desired AtomicOp sizes and the path to the Root Port supports routing the
AtomicOps.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
[bhelgaas: changelog, comments, whitespace] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stuart Hayes [Fri, 5 Jan 2018 18:51:55 +0000 (12:51 -0600)]
PCI: Expose ari_enabled in sysfs
Some multifunction PCI devices with more than 8 functions use "alternative
routing-ID interpretation" (ARI), which means the 8-bit device/function
number field will be interpreted as 8 bits specifying the function number
(the device number is 0 implicitly), rather than the upper 5 bits
specifying the device number and the lower 3 bits specifying the function
number. The kernel can enable and use this.
Expose in a sysfs attribute whether the kernel has enabled ARI, so that a
program in userspace won't have to parse PCI devices and PCI configuration
space to figure out if it is enabled. This will allow better predictable
network naming using PCI function numbers without using PCI bus or device
numbers, which is desirable because bus and device numbers can change with
system configuration but function numbers will not.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Lukas Wunner [Wed, 17 Jan 2018 15:48:39 +0000 (16:48 +0100)]
PCI: pciehp: Assume NoCompl+ for Thunderbolt ports
Certain Thunderbolt 1 controllers claim to support Command Completed events
(value of 0b in the No Command Completed Support field of the Slot
Capabilities register) but in reality they neither set the Command
Completed bit in the Slot Status register nor signal a Command Completed
interrupt:
All known newer chips (Redwood Ridge and onwards) set No Command Completed
Support, indicating that they do not support Command Completed events.
The user-visible impact is that after unplugging such a device, 2 seconds
elapse until pciehp is unbound. That's because on ->remove,
pcie_write_cmd() is called via pcie_disable_notification() and every call
to pcie_write_cmd() takes 2 seconds (1 second for each invocation of
pcie_wait_cmd()):
That by itself has always been unpleasant, but the situation has become
worse with commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown"): Now pciehp is unbound on ->shutdown. Because Thunderbolt
controllers typically have 4 hotplug ports, every reboot and shutdown is
now delayed by 8 seconds, plus another 2 seconds for every attached
Thunderbolt 1 device.
Thunderbolt hotplug slots are not physical slots that one inserts cards
into, but rather logical hotplug slots implemented in silicon. Devices
appear beyond those logical slots once a PCI tunnel is established on top
of the Thunderbolt Converged I/O switch. One would expect commands written
to the Slot Control register to be executed immediately by the silicon, so
for simplicity we always assume NoCompl+ for Thunderbolt ports.
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown") Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org # v4.12+ Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Yehezkel Bernat <yehezkel.bernat@intel.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Andreas Noever <andreas.noever@gmail.com>
Niklas Cassel [Fri, 19 Jan 2018 09:39:06 +0000 (10:39 +0100)]
PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build
Some hardware can operate in either "host" or "endpoint" mode, which means
there can be both a host bridge driver and an endpoint driver for the same
device. Those drivers share a lot of code, so sometimes they live in the
same source file.
The host bridge driver requires CONFIG_PCI=y because it enumerates PCI
devices below the bridge using the PCI core. The endpoint driver does not
require CONFIG_PCI=y because it runs in an embedded kernel on the other
side of the device, e.g., on an adapter card.
pci-dra7xx.c contains both host and endpoint drivers. If we select only
the endpoint driver (CONFIG_PCI=n and CONFIG_PCI_DRA7XX_EP=y), the unneeded
host driver is still compiled. It references pci_irqd_intx_xlate(), which
is not present when CONFIG_PCI=n, which causes this error:
drivers/pci/dwc/pci-dra7xx.c:229:11: error: 'pci_irqd_intx_xlate' undeclared here (not in a function)
Add a dummy pci_irqd_intx_xlate() for the CONFIG_PCI=n case.
Historically some ISA drivers used the old PCI DMA API with a NULL pdev
argument, but these days this isn't used and not too useful due to the
per-device DMA ops, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We need to pass a struct device to the DMA API, even if some architectures
still support that for legacy reasons, and should not mix it with the old
PCI DMA API.
Note that the driver also seems to never actually unmap its DMA mappings,
but to fix that we'll need someone more familar with the driver.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Rob Herring [Thu, 4 Jan 2018 21:12:14 +0000 (15:12 -0600)]
powerpc/pci: Use of_irq_parse_and_map_pci() helper
Instead of calling both of_irq_parse_pci() and irq_create_of_mapping(),
call of_irq_parse_and_map_pci(), which does the same thing. This will allow
making of_irq_parse_pci() a private, static function.
This changes the logic slightly in that the fallback path will also be
taken if irq_create_of_mapping() fails internally.
Signed-off-by: Rob Herring <robh@kernel.org>
[bhelgaas: fold in virq init from Stephen Rothwell <sfr@canb.auug.org.au>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au>
Markus Elfring [Fri, 29 Dec 2017 11:15:16 +0000 (12:15 +0100)]
PCI: Remove unnecessary messages for memory allocation failures
Per ebfdc40969f2 ("checkpatch: attempt to find unnecessary 'out of memory'
messages"), when a memory allocation fails, the memory subsystem emits
generic "out of memory" messages (see slab_out_of_memory() for some of this
logging). Therefore, additional error messages in the caller don't add
much value.
Remove messages that merely report "out of memory".
This preserves some messages that report additional information, e.g.,
allocation failures that mean we drop hotplug events.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[bhelgaas: changelog, squash patches, make similar changes to acpiphp,
cpqphp, ibmphp, keep warning when dropping hotplug event] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
struct riva_par has a pointer to struct pci_dev. Use the pci_dev member
to extract the domain information.
Change the function signature for CalcStateExt and RivaGetConfig to pass
in struct pci_dev in addition to RIVA_HW_INST so that code inside the
riva_hw.c can also calculate domain number and pass it to
pci_get_domain_bus_and_slot().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
struct nvidia_par has a pointer to struct pci_dev. Use the pci_dev
member to extract the domain information and pass it to
pci_get_domain_bus_and_slot() function.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Find the domain number from pdev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Sinan Kaya [Tue, 19 Dec 2017 05:37:56 +0000 (00:37 -0500)]
openprom: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Hard-coding the domain as 0 since domain information is not available.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: David S. Miller <davem@davemloft.net>
Sinan Kaya [Tue, 19 Dec 2017 05:37:55 +0000 (00:37 -0500)]
xen/pcifront: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Use pci_get_domain_bus_and_slot() with a domain number of 0 where we can't
extract the domain number. Other places, use the actual domain number from
the device.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com>
Sinan Kaya [Tue, 19 Dec 2017 05:37:53 +0000 (00:37 -0500)]
PCI: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
When we have a pci_dev, extract the domain number from it.
The config access syscalls don't allow the user to supply a domain number,
so they only work on devices in domain 0, so we can just hard-code that.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
[bhelgaas: squash quirk & syscall patches together] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:52 +0000 (00:37 -0500)]
PCI: ibmphp: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Hard-coding the domain parameter as 0 since the code doesn't seem to be
ready for multiple domains.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:51 +0000 (00:37 -0500)]
PCI: cpqhp: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Hard-coding the domain number as 0. The code doesn't seem to be ready
for multiple domains.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:50 +0000 (00:37 -0500)]
pch_gbe: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Use the domain information from pdev while calling into
pci_get_domain_bus_and_slot() function.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: David S. Miller <davem@davemloft.net>
Sinan Kaya [Tue, 19 Dec 2017 05:37:49 +0000 (00:37 -0500)]
bnx2x: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Introduce bnx2x_vf_domain() function to extract the domain information
and save it to VF specific data structure.
Use the saved domain value while calling pci_get_domain_bus_and_slot().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: David S. Miller <davem@davemloft.net>
Sinan Kaya [Tue, 19 Dec 2017 05:37:48 +0000 (00:37 -0500)]
powerpc/via-pmu: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Hard-code the domain number as 0 to match the previous behavior.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Alex Williamson [Tue, 16 Jan 2018 17:05:26 +0000 (10:05 -0700)]
PCI: Add function 1 DMA alias quirk for Marvell 9128
The Marvell 9128 is the original device generating bug 42679, from which
many other Marvell DMA alias quirks have been sourced, but we didn't have
positive confirmation of the fix on 9128 until now.
Dongdong Liu [Thu, 28 Dec 2017 09:53:32 +0000 (17:53 +0800)]
PCI: Disable MSI for HiSilicon Hip06/Hip07 only in Root Port mode
HiSilicon Hip06/Hip07 can operate as either a Root Port or an Endpoint. It
always advertises an MSI capability, but it can only generate MSIs when in
Endpoint mode.
The device has the same Vendor and Device IDs in both modes, so check the
Class Code and disable MSI only when operating as a Root Port.
[bhelgaas: changelog] Fixes: 72f2ff0deb87 ("PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports") Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Cc: stable@vger.kernel.org # v4.11+
Keith Busch [Tue, 19 Dec 2017 21:06:40 +0000 (14:06 -0700)]
PCI/AER: Return error if AER is not supported
get_device_error_info() reads error information from registers in the AER
capability. If we call it for a device that has no AER capability, it
should return an error, but previously it returned success.
Return 0 (error) if the device doesn't have an AER capability.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:47 +0000 (00:37 -0500)]
iommu/amd: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Hard-code the domain number as 0 for the AMD IOMMU driver.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Reviewed-by: Gary R Hook <gary.hook@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de>
Sinan Kaya [Tue, 19 Dec 2017 05:37:46 +0000 (00:37 -0500)]
sl82c105: deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: David S. Miller <davem@davemloft.net>
Sinan Kaya [Tue, 19 Dec 2017 05:37:45 +0000 (00:37 -0500)]
drm/nouveau: deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from
1. struct pci_dev
2. struct pci_dev through drm_device->pdev
3. struct pci_dev through fb->subdev->drm_device->pdev
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:44 +0000 (00:37 -0500)]
drm/gma500: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Add domain parameter to CDV_MSG_READ32, CDV_MSG_WRITE32, MRST_MSG_READ32,
MRST_MSG_WRITE32, MDFLD_MSG_READ32, MDFLD_MSG_WRITE32.
Extract pci_dev from struct drm_device and use pdev to find the domain
number while calling pci_get_domain_bus_and_slot().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:43 +0000 (00:37 -0500)]
ibft: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
We don't search for the device in other domains than zero. This is because
on x86 platforms the BIOS executes only devices which are in domain 0.
Furthermore, the iBFT spec doesn't have a domain id field.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:42 +0000 (00:37 -0500)]
edd: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Domain number is not available in struct edd_info. Hard-coding the domain
number as 0.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Sinan Kaya [Thu, 11 Jan 2018 23:25:15 +0000 (17:25 -0600)]
agp: sworks: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:41 +0000 (00:37 -0500)]
agp: nvidia: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:40 +0000 (00:37 -0500)]
ata: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Use pci_get_domain_bus_and_slot() and extract the actual domain number
from the pdev passed in.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Tejun Heo <tj@kernel.org>
Sinan Kaya [Tue, 19 Dec 2017 05:37:39 +0000 (00:37 -0500)]
x86/PCI: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Use domain number of 0 as the domain number is not available in struct
irq_routing_table.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
Sinan Kaya [Tue, 19 Dec 2017 05:37:38 +0000 (00:37 -0500)]
powerpc/PCI: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Use pci_get_domain_bus_and_slot() with a domain number of 0 as the code
is not ready to consume multiple domains and existing code used domain
number 0.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Sinan Kaya [Tue, 19 Dec 2017 05:37:37 +0000 (00:37 -0500)]
alpha/PCI: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Use pci_get_domain_bus_and_slot() with a domain number of 0 where we can't
extract the domain number. Other places, use the actual domain number from
the device.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Alex Williamson [Thu, 14 Dec 2017 15:20:18 +0000 (08:20 -0700)]
PCI/DPC: Fix shared interrupt handling
DPC supports shared interrupts, but it plays very loosely with testing
whether the interrupt is generated by DPC before generating spurious log
messages, such as:
Testing the status register for zero or -1 is not sufficient when the
device supports the RP PIO First Error Pointer register. Change this to
test whether the interrupt is enabled in the control register, retaining
the device present test, and that the status reports the interrupt as
signaled and DPC is triggered, clearing as a spurious interrupt otherwise.
Additionally, since the interrupt is actually serviced by a workqueue,
disable the interrupt in the control register until that completes or else
we may never see it execute due to further incoming interrupts. A software
generated DPC floods the system otherwise.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Reviewed-by: Keith Busch <keith.busch@intel.com>
Romain Perier [Tue, 2 Jan 2018 17:53:55 +0000 (18:53 +0100)]
hinic: Replace PCI pool old API
The PCI pool API is deprecated. Replace the PCI pool old API by the
appropriate function with the DMA pool API.
Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net>
Romain Perier [Tue, 2 Jan 2018 17:53:54 +0000 (18:53 +0100)]
net: e100: Replace PCI pool old API
The PCI pool API is deprecated. Replace the PCI pool old API by the
appropriate function with the DMA pool API.
Tested-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Peter Senna Tschudin <peter.senna@collabora.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: David S. Miller <davem@davemloft.net>
Bjorn Helgaas [Fri, 15 Dec 2017 20:51:44 +0000 (14:51 -0600)]
PCI: Mark Ceton InfiniTV4 INTx masking as broken
PCI_COMMAND_INTX_DISABLE is writable on the Ceton InfiniTV4, indicating
that the device supports disabling the INTx# signal, but it apparently
doesn't work.
Mark the device so we know we can't use PCI_COMMAND_INTX_DISABLE to disable
its interrupts.
Logan Gunthorpe [Wed, 29 Nov 2017 17:28:43 +0000 (10:28 -0700)]
switchtec: Add Global Fabric Manager Server (GFMS) event
Add a new event type that is newly exposed by recent firmware. The event
will never occur if the firmware is too old. If user space tries to use
this event in an older kernel, it will just get an EINVAL which is
perfectly acceptable in the existing user space code.
Bjorn Helgaas [Fri, 1 Dec 2017 20:07:18 +0000 (14:07 -0600)]
resource: Set type when reserving new regions
Set resource structs inserted by __reserve_region_with_split() to have the
correct type. Setting the type doesn't fix any functional problem but
makes %pR on the resource work better.
Bjorn Helgaas [Fri, 1 Dec 2017 17:50:33 +0000 (11:50 -0600)]
resource: Set type of "reserve=" user-specified resources
When we reserve regions because the user specified a "reserve=" parameter,
set the resource type to either IORESOURCE_IO (for regions below 0x10000)
or IORESOURCE_MEM. The test for 0x10000 is just a heuristic; obviously
there can be memory below 0x10000 as well.
Improve documentation of the "reserve=" parameter.
Bjorn Helgaas [Tue, 5 Dec 2017 00:08:39 +0000 (18:08 -0600)]
irqchip/i8259: Set I/O port resource types correctly
Set I/O port resource structs to have IORESOURCE_IO in their type field.
Previously we marked these as merely IORESOURCE_BUSY without indicating the
type. Setting the type doesn't fix any functional problem but makes %pR
on the resource work better.
Bjorn Helgaas [Tue, 5 Dec 2017 00:08:01 +0000 (18:08 -0600)]
powerpc: Set I/O port resource types correctly
Set I/O port resource structs to have IORESOURCE_IO in their type field.
Previously we marked these as merely IORESOURCE_BUSY without indicating the
type. Setting the type doesn't fix any functional problem but makes %pR
on the resource work better.
Bjorn Helgaas [Tue, 5 Dec 2017 00:07:14 +0000 (18:07 -0600)]
MIPS: Set I/O port resource types correctly
Set I/O port resource structs to have IORESOURCE_IO in their type field.
Previously we marked these as merely IORESOURCE_BUSY without indicating the
type. Setting the type doesn't fix any functional problem but makes %pR
on the resource work better.
Bjorn Helgaas [Fri, 1 Dec 2017 17:06:39 +0000 (11:06 -0600)]
vgacon: Set VGA struct resource types
Set the resource type when we reserve VGA-related I/O port resources.
The resource code doesn't actually look at the type, so it inserts
resources without a type in the tree correctly even without this change.
But if we ever print a resource without a type, it looks like this:
vga+ [??? 0x000003c0-0x000003df flags 0x0]
Setting the type means it will be printed correctly as: