Dave Stevenson [Thu, 16 Nov 2017 14:22:30 +0000 (14:22 +0000)]
drm/vc4: Use .pixel_order instead of custom .flip_cbcr
The hardware has enums for altering the Cr and Cb order,
so use this instead of having a flag which swaps the
order the pointers are presented to the hardware
(that only worked for 3 plane formats anyway).
Explicitly sets .pixel_order in each case, rather than
relying on then default XYCBCR order being a value 0.
Ville Syrjälä [Wed, 1 Nov 2017 20:16:19 +0000 (22:16 +0200)]
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
drm_plane_helper_check_update() isn't a transitional helper, so let's
rename it to drm_atomic_helper_check_plane_state() and move it into
drm_atomic_helper.c.
v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc
Ville Syrjälä [Wed, 1 Nov 2017 20:15:58 +0000 (22:15 +0200)]
drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()
drm_plane_helper_check_state() is supposed to do things the atomic way,
so it should not be inspecting crtc->enabled. Rather we should be
looking at crtc_state->enable.
We have a slight complication due to drm_plane_helper_check_update()
reusing drm_plane_helper_check_state() for non-atomic drivers. Thus
we'll have to pass the crtc_state in manally and construct a fake
crtc_state in drm_plane_helper_check_update().
v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc
Ville Syrjälä [Wed, 1 Nov 2017 18:29:18 +0000 (20:29 +0200)]
drm/vmwgfx: Try to fix plane clipping
Try to fix the code to actually clip the plane to the crtc bounds
instead of the user provided crtc coordinates (which would be a no-op
since those are exactly the coordinates before clipping).
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-4-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Ville Syrjälä [Wed, 1 Nov 2017 18:29:16 +0000 (20:29 +0200)]
drm/vmwgfx: Remove bogus crtc coords vs fb size check
Throw away the bugs crtc coords vs. fb size check. Crtc coords don't
define the viewport inside the fb, that's a job for the src coords,
which have been checked by the core already.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
There is no need to #define the license of the driver, just put it in
the MODULE_LICENSE() line directly as a text string.
This allows tools that check that the module license matches the source
code license to work properly, as there is no need to unwind the
unneeded dereference, especially when the string is defined in a .h file
far away from the .c file it is used in.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Reported-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171117141632.GA17880@kroah.com
Lucas Stach [Fri, 13 Jan 2017 17:36:30 +0000 (18:36 +0100)]
drm: don't link DP aux i2c adapter to the hardware device node
The i2c adapter on DP AUX is purely a software construct. Linking
it to the device node of the parent device is wrong, as it leads to
2 devices sharing the same device node, which is bad practice, as
well as the i2c trying to populate children of the i2c adapter by
looking at the child device nodes of the parent device.
Maciej Purski [Thu, 9 Nov 2017 10:53:42 +0000 (11:53 +0100)]
drm/bridge/sii8620: add DVI mode support
If the sink device is in HDMI mode, enable infoframe interrupt in scdt
irq handle function else call start_video function immediately, because
in DVI mode, there is no infoframe interrupt provided.
Rename start_hdmi function to start_video and get rid of the old
start_video function. In start_video, if the sink is DVI and mode is
MHL1 or MHl2, write appropriate values to registers else the path
should remain the same as in HDMI mode.
The maximum pixel clock depends on the version of the connected MHL
adapter. Add mode_valid callback to filter out modes with too high pixel
clock to avoid failure in mode_fixup later.
Liviu Dudau [Fri, 10 Nov 2017 13:33:10 +0000 (13:33 +0000)]
drm: gem_cma_helper.c: Allow importing of contiguous scatterlists with nents > 1
drm_gem_cma_prime_import_sg_table() will fail if the number of entries
in the sg_table > 1. However, you can have a device that uses an IOMMU
engine and can map a discontiguous buffer with multiple entries that
have consecutive sg_dma_addresses, effectively making it contiguous.
Allow for that scenario by testing the entries in the sg_table for
contiguous coverage.
Noralf Trønnes [Mon, 13 Nov 2017 23:12:01 +0000 (00:12 +0100)]
drm/debugfs: Fix framebuffer debugfs file init
The introduction of: drm/framebuffer: Add framebuffer debugfs file
broke vgem. That patch assumed that all drivers had initialized the
dev->mode_config.fb_lock mutex which happens in drm_mode_config_init().
vgem doesn't need to call drm_mode_config_init().
Fix this by only creating the framebuffer debugfs file for modesetting
drivers.
Fixes: 45d58b40292b ("drm/framebuffer: Add framebuffer debugfs file") Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113231201.26177-1-noralf@tronnes.org
This will happily return a non-const pointer to the drm_gem_cma_object
based on a const pointer to the contained drm_gem_object, thus creating
const-safety problems.
There was an attempt to fix the problem in the container_of() macro
itself (see https://lkml.org/lkml/2017/5/19/381) but the patch seems to
have fallen through the cracks. It would require turning this inline
function into a macro.
By making this a macro now, we will benefit from a possible future
enhancement of container_of(). We don't loose type checking by doing
this, container_of() takes care of that.
Ville Syrjälä [Thu, 2 Nov 2017 20:03:36 +0000 (22:03 +0200)]
dma-buf: Use rcu_assign_pointer() to set rcu protected pointers
Use rcu_assign_pointer() when setting an rcu protected pointer.
This gets rid of another sparse warning.
Cc: Dave Airlie <airlied@redhat.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: linaro-mm-sig@lists.linaro.org Cc: linux-media@vger.kernel.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-5-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Christian König <christian.koenig@amd.com>. Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Ville Syrjälä [Thu, 2 Nov 2017 20:03:35 +0000 (22:03 +0200)]
drm/syncobj: Use proper methods for accessing rcu protected pointers
Use rcu_dereference_protected() and rcu_assign_pointer() for accessing
the rcu protected syncobj->fence pointer. This eliminates several sparse
warnings.
Cc: Dave Airlie <airlied@redhat.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: linaro-mm-sig@lists.linaro.org Cc: linux-media@vger.kernel.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-4-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com>
Chris Wilson [Thu, 2 Nov 2017 20:03:34 +0000 (22:03 +0200)]
dma-buf/fence: Sparse wants __rcu on the object itself
In order to silence sparse in dma_fence_get_rcu_safe(), we need to mark
the incoming fence object as being RCU protected and not the pointer to
the object.
Cc: Dave Airlie <airlied@redhat.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: linaro-mm-sig@lists.linaro.org Cc: linux-media@vger.kernel.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-3-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
[vsyrjala: s/silent/silence/ in commit message] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Chris Wilson [Thu, 2 Nov 2017 20:03:33 +0000 (22:03 +0200)]
drm/syncobj: Mark up the fence as an RCU protected pointer
We take advantage of that syncobj->fence is an RCU-protected pointer, and
so sparse complains that it is lacking annotation.
Cc: Dave Airlie <airlied@redhat.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: linaro-mm-sig@lists.linaro.org Cc: linux-media@vger.kernel.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
drm: sti: remove useless fields from vtg structure
Drivers are registered on platform bus so the private list
could be replace by a call to of_find_device_by_node().
Changing this also makes dev, np and link fields useless
in vtg structure.
Jani Nikula [Wed, 1 Nov 2017 14:21:02 +0000 (16:21 +0200)]
drm/drivers: drop redundant drm_edid_to_eld() calls
drm_add_edid_modes() now fills in the ELD automatically, so the calls to
drm_edid_to_eld() are redundant. Remove them.
All the other places are obvious, but nv50 has detached
drm_edid_to_eld() from the drm_add_edid_modes() call.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Russell King <linux@armlinux.org.uk> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0959ca02b983afc9e74dd9acd190ba6e25f21678.1509545641.git.jani.nikula@intel.com
Jani Nikula [Wed, 1 Nov 2017 14:21:01 +0000 (16:21 +0200)]
drm/edid: build ELD in drm_add_edid_modes()
Call drm_edid_to_eld() from drm_add_edid_modes() to fill in the ELD
automatically. There's no harm in doing this for connectors that do not
support audio.
Jani Nikula [Wed, 1 Nov 2017 14:20:58 +0000 (16:20 +0200)]
drm/edid: set ELD connector type in drm_edid_to_eld()
Since drm_edid_to_eld() knows the connector type, we can set the type in
ELD while at it. Most connectors this gets called on are not DP
encoders, and with the HDMI type being 0, this does not change behaviour
for non-DP.
For i915 having this in place earlier would have saved a considerable
amount of debugging that lead to the fix 2d8f63297b9f ("drm/i915: always
update ELD connector type after get modes"). I don't see other drivers,
even the ones calling drm_edid_to_eld() on DP connectors, setting the
connector type in ELD.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Russell King <linux@armlinux.org.uk> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d527b31619528c477c2c136f25cdf118bc0cfc1d.1509545641.git.jani.nikula@intel.com
Chris Wilson [Tue, 7 Nov 2017 10:41:31 +0000 (10:41 +0000)]
drm/selftests/mm: Insert cond_resched() between insert modes
kbuilder has begun running the selftests and reported a soft-lockup
inside __igt_insert(), so break up the test loop over different modes
with another call to cond_resched().
Arnd Bergmann [Sat, 4 Nov 2017 21:20:08 +0000 (22:20 +0100)]
drm: via: use ktime_get() instead of do_gettimeofday
We want to remove uses of do_gettimeofday() from the kernel since the
resulting timeval structure overflows in 2038. This is not a problem for
this particular use, but do_gettimeofday() is also not an appropriate
method for measuring time intervals, since it requires a conversion into
microseconds and is complicated to work with.
ktime_get() is a better replacement, as it works with the monontonic
kernel timebase and requires a minimum of computation.
I'm slightly changing the output from microseconds to nanoseconds here,
to avoid introducing a new division operation. This should be fine
since the value is only used for debugging.
Commit db2395eccf08i ("drm: Convert drm_vma_manager to embedded
interval-tree in drm_mm") removed a line in drm_vma_offset_add() function that
makes checking the result of calling drm_mm_insert_node() and the goto
call redundant. Rework the function (as suggested by Chris Wilson) to
eliminate the need for the goto and associated label.
v2: rewrite function to remove all goto statements.
Fixes: db2395eccf08i ("drm: Convert drm_vma_manager to embedded interval-tree in drm_mm") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171101144458.5353-1-Liviu.Dudau@arm.com
Noralf Trønnes [Mon, 30 Oct 2017 15:39:38 +0000 (16:39 +0100)]
drm: Add drm_device->fb_helper pointer
drm_fb_helper is *the* way of doing fbdev emulation so add a pointer to
struct drm_device. This makes it possible to add callback helpers for
.last_close and .output_poll_changed further reducing fbdev emulation
footprint in drivers. The pointer is set by drm_fb_helper_init() and
cleared by drm_fb_helper_fini().
Noralf Trønnes [Mon, 30 Oct 2017 15:39:37 +0000 (16:39 +0100)]
drm/fb-helper: Handle function NULL argument
Make functions tolerate that the drm_fb_helper argument is NULL.
This is useful for drivers that continue probing when fbdev emulation
fails and not having to do this check themselves.
Update docs for functions that already handles this.
Daniel Vetter [Mon, 30 Oct 2017 13:10:28 +0000 (14:10 +0100)]
MAINTAINERS: Gustavo as drm-misc co-maintainer
Gustavo volunteered to become a drm-misc co-maintainer, he'll take
care of 4.16 to get started.
Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Acked-by: Sean Paul <seanpaul@chromium.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171030131028.11285-1-daniel.vetter@ffwll.ch
Daniel Vetter [Mon, 30 Oct 2017 13:15:36 +0000 (14:15 +0100)]
drm/TODO: Clarify DRM_DEV_* conversion
Not everyone agrees this is the best thing, so make it really clear
that maintainers need to be asked first, then the conversion. We've
had a few newbies that did this the other way round, got their patches
rejected, which isn't the best newbie experience.
Kees Cook [Tue, 24 Oct 2017 15:16:09 +0000 (08:16 -0700)]
drm: gma500: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171024151609.GA104501@beast
Dan Carpenter [Fri, 20 Oct 2017 00:28:45 +0000 (03:28 +0300)]
drm/panel: rpi-touchscreen: propagate errors in rpi_touchscreen_i2c_read()
There is one caller which checks whether rpi_touchscreen_i2c_read()
returns negative error codes. Currently it can't because negative
error codes are truncated to u8, but that's easy to fix if we change the
type to int.
Kees Cook [Tue, 24 Oct 2017 15:16:48 +0000 (08:16 -0700)]
drm/vc4: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Eric Anholt <eric@anholt.net> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20171024151648.GA104538@beast Reviewed-by: Eric Anholt <eric@anholt.net>
Chris Wilson [Fri, 27 Oct 2017 11:06:02 +0000 (12:06 +0100)]
drm: Enable pr_debug() for drm_printer
pr_debug() is conditionally compiled and requires either
dynamic-debugging to be enabled or for the code to opt-in using #define
DEBUG. Since drm_print provides a central debugging facility using
pr_debug(), make sure it will always produce output.
Pan Bian [Sun, 29 Oct 2017 05:55:12 +0000 (13:55 +0800)]
gma500: mmu: unmap the correct address
The function kunmap_atomatic() is called on the same variable twice,
i.e. pt->v. In the second call, its parameter should be variable v
rather than pt->v.
Aastha Gupta [Mon, 23 Oct 2017 16:38:06 +0000 (22:08 +0530)]
drm: virtio: replace reference/unreference with get/put
DRM core uses reference/unreference suffixes for refcounting
functions, but kernel uses get/put (e.g. kref_get/put()).
Replace reference/unreference with get/put for consistency
and also it's shorter.
The following cocci script was used to generate the patch:
drm/dp: Bit definition for D3 power state that keeps AUX fully powered
DPCD 600h - SET_POWER & SET_DP_PWR_VOLTAGE defines power state
101 = Set Main-Link for local Sink device and all downstream Sink
devices to D3 (power-down mode), keep AUX block fully powered, ready to
reply within a Response Timeout period of 300us.
This state is useful in a MST dock + MST monitor configuration that
doesn't wake up from D3 state.
Harsha Sharma [Sat, 14 Oct 2017 20:28:23 +0000 (01:58 +0530)]
drm/tinydrm: Replace list_for_each with list_for_each_entry
Replace use of list_for_each with list_for_each_entry to simplify the
code and remove variables that are used only in list_for_each.
Done with following coccinelle patch:
@r@
identifier fn,i,f,p;
expression e;
iterator name list_for_each, list_for_each_entry;
type T;
@@
Sean Paul [Fri, 20 Oct 2017 17:25:48 +0000 (13:25 -0400)]
drm/rockchip: Fix build warning in analogix_dp-rockchip.c
I didn't catch this before applying, just right after (of course).
Fixes:
../drivers/gpu/drm/rockchip/analogix_dp-rockchip.c: In function
‘rockchip_dp_of_probe’:
../drivers/gpu/drm/rockchip/analogix_dp-rockchip.c:276:6: warning:
unused variable ‘ret’ [-Wunused-variable]
int ret;
^~~
Fixes: 102712a32ff5 ("drm/rockchip: analogix_dp: Remove unnecessary init
code") Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171020172557.54900-1-seanpaul@chromium.org
Haneen Mohammed [Wed, 18 Oct 2017 04:31:22 +0000 (22:31 -0600)]
drm/print: Update old comment style
Remove old comment style used by doxygen.
And remove comment left from commit 99cdb35e787b ("drm/doc: move printf
helpers out of drmP.h") after refactoring drmP.h.
Haneen Mohammed [Wed, 18 Oct 2017 04:30:07 +0000 (22:30 -0600)]
drm: Move debug macros out of drmP.h
This patch extract DRM_* debug macros from drmP.h to drm_print.h and
move printing related functions used by these macros from drm_drv.[hc]
to drm_print.[hc].
Eric Anholt [Sat, 14 Oct 2017 00:12:55 +0000 (17:12 -0700)]
drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.
VC4's DSI1 has a bug where the AXI connection is broken for 32-bit
writes from the CPU, so we use the DMA engine to DMA 32-bit values
into registers instead. That sleeps, so we can't do it from the top
half.
As a solution, use an interrupt thread so that all our writes happen
when sleeping is is allowed.
v2: Use IRQF_ONESHOT (suggested by Boris)
v3: Style nitpicks.
Boris Brezillon [Thu, 19 Oct 2017 12:57:48 +0000 (14:57 +0200)]
drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl
This ioctl will allow us to purge inactive userspace buffers when the
system is running out of contiguous memory.
For now, the purge logic is rather dumb in that it does not try to
release only the amount of BO needed to meet the last CMA alloc request
but instead purges all objects placed in the purgeable pool as soon as
we experience a CMA allocation failure.
Note that the in-kernel BO cache is always purged before the purgeable
cache because those objects are known to be unused while objects marked
as purgeable by a userspace application/library might have to be
restored when they are marked back as unpurgeable, which can be
expensive.
Philipp Zabel [Wed, 11 Oct 2017 12:59:56 +0000 (14:59 +0200)]
drm/panel: simple: fix vertical timings for Innolux AT043TN24
The vsync length should be 10 lines, as specified in the data sheet.
This gets the actual refresh rate closer to nominal 60 Hz given the
9 MHz pixel clock.
Daniel Vetter [Tue, 17 Oct 2017 15:27:14 +0000 (17:27 +0200)]
drm/atomic-helper: check that drivers call drm_crtc_vblank_off
At least when they have vblank support they need to call this, or the
vblank core will happily call into their crtc->enable_vblank callback
even when the crtc is off. Which leads to a boom when the clocks are
off on most hardware (besides the inevitable confusion in the
book-keeping).
The consistency checks in drm_vblank.c will then make sure that
vblank_off/on calls are balanced, and if drivers forget to re-enable
it all the commits will stall, so I think we're covered.
It'd be nice to be able to place this check outside of commit helpers,
but tha's not really possible (due to nonblocking commits and all
that). Placing it into atomic helpers should at least cover most
drivers.
Also note that vblank support is still optional (for virtual drivers,
which tend to not have this), check for that.
Bjorn Helgaas [Fri, 13 Oct 2017 03:47:29 +0000 (22:47 -0500)]
vgaarb: Factor out EFI and fallback default device selection
The default VGA device is normally set in vga_arbiter_add_pci_device() when
we call it for the first enabled device that can be accessed with the
legacy VGA resources ([mem 0xa0000-0xbffff], etc.)
That default device can be overridden by an EFI device that owns the boot
framebuffer. As a fallback, we can also select a VGA device that can't be
accessed via legacy VGA resources, or a VGA device that isn't even enabled.
Factor out this EFI and fallback selection from vga_arb_device_init() into
a separate vga_arb_select_default_device() function. This doesn't change
any behavior, but it untangles the "bridge control possible" checking and
messages from the default device selection.
Bjorn Helgaas [Fri, 13 Oct 2017 03:47:22 +0000 (22:47 -0500)]
vgaarb: Select a default VGA device even if there's no legacy VGA
Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is
behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter
never selects it as the default, which means Xorg auto-detection doesn't
work.
VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g.,
[mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are
not configurable by BARs. Consequently, multiple VGA devices can conflict
with each other. The VGA arbiter avoids conflicts by ensuring that those
legacy resources are only routed to one VGA device at a time.
The arbiter identifies the "default VGA" device, i.e., a legacy VGA device
that was used by boot firmware. It selects the first device that:
- is of PCI_CLASS_DISPLAY_VGA,
- has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and
- has PCI_BRIDGE_CTL_VGA set in all upstream bridges.
Some systems don't have such a device. For example, if a host bridge
doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any
devices below it. Or, as on the HiSilicon D05, the VGA device may be
behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the
legacy VGA resources will never reach the device.
This patch extends the arbiter so that if it doesn't find a device that
meets all the above criteria, it selects the first device that:
- is of PCI_CLASS_DISPLAY_VGA and
- has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled
If it doesn't find even that, it selects the first device that:
- is of class PCI_CLASS_DISPLAY_VGA.
Such a device may not be able to use the legacy VGA resources, but most
drivers can operate the device without those. Setting it as the default
device means its "boot_vga" sysfs file will contain "1", which Xorg (via
libpciaccess) uses to help select its default output device.
This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in
particular; see the link below).
It also replaces the powerpc fixup_vga() quirk, albeit with slightly
different semantics: the quirk selected the first VGA device we found, and
overrode that selection with any enabled VGA device we found. If there
were several enabled VGA devices, the *last* one we found would become the
default.
The code here instead selects the *first* enabled VGA device we find, and
if none are enabled, the first VGA device we find.
Jonathan Liu [Tue, 17 Oct 2017 12:18:02 +0000 (20:18 +0800)]
drm/sun4i: Add support for A20 display pipeline components
The A20 display pipeline has 2 frontends, 2 backends, and 2 TCONs.
This patch adds support (or a compatible string in the frontend's
case) for these components.
The TCONs support directly outputting to CPU/RGB/LVDS LCD panels,
or it can output to HDMI via an on-chip HDMI controller, or
CVBS/YPbPr/VGA signals via on-chip TV encoders. These additional
encoders are not covered in this patch.