net: Provide stub for __netif_set_xps_queue if there is no CONFIG_XPS
Building virtio_net driver without CONFIG_XPS fails with:
drivers/net/virtio_net.c: In function ‘virtnet_set_affinity’:
drivers/net/virtio_net.c:1910:3: error: implicit declaration of function ‘__netif_set_xps_queue’ [-Werror=implicit-function-declaration]
__netif_set_xps_queue(vi->dev, mask, i, false);
^ Fixes: 4d99f6602cb5 ("net: allow to call netif_reset_xps_queues() under cpus_read_lock") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrei Vagin [Thu, 9 Aug 2018 03:07:35 +0000 (20:07 -0700)]
net: allow to call netif_reset_xps_queues() under cpus_read_lock
The definition of static_key_slow_inc() has cpus_read_lock in place. In the
virtio_net driver, XPS queues are initialized after setting the queue:cpu
affinity in virtnet_set_affinity() which is already protected within
cpus_read_lock. Lockdep prints a warning when we are trying to acquire
cpus_read_lock when it is already held.
This patch adds an ability to call __netif_set_xps_queue under
cpus_read_lock(). Acked-by: Jason Wang <jasowang@redhat.com>
============================================
WARNING: possible recursive locking detected
4.18.0-rc3-next-20180703+ #1 Not tainted
--------------------------------------------
swapper/0/1 is trying to acquire lock: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: static_key_slow_inc+0xe/0x20
but task is already holding lock: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0
other info that might help us debug this:
Possible unsafe locking scenario:
3 locks held by swapper/0/1:
#0: 00000000244bc7da (&dev->mutex){....}, at: __driver_attach+0x5a/0x110
#1: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0
#2: 000000005cd8463f (xps_map_mutex){+.+.}, at: __netif_set_xps_queue+0x8d/0xc60
v2: move cpus_read_lock() out of __netif_set_xps_queue()
Cc: "Nambiar, Amritha" <amritha.nambiar@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue") Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Wed, 8 Aug 2018 12:38:55 +0000 (14:38 +0200)]
net: dsa: rtl8366rb: Support port 4 (WAN)
The totally undocumented IO mode needs to be set to enumerator
0 to enable port 4 also known as WAN in most configurations,
for ordinary traffic. The 3 bits in the register come up as
010 after reset, but need to be set to 000.
The Realtek source code contains a name for these bits, but
no explanation of what the 8 different IO modes may be.
Set it to zero for the time being and drop a comment so
people know what is going on if they run into trouble. This
"mode zero" works fine with the D-Link DIR-685 with
RTL8366RB.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 8 Aug 2018 11:59:32 +0000 (19:59 +0800)]
decnet: fix using plain integer as NULL warning
Fixes the following sparse warning:
net/decnet/dn_route.c:407:30: warning: Using plain integer as NULL pointer
net/decnet/dn_route.c:1923:22: warning: Using plain integer as NULL pointer
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Maria Pasechnik [Wed, 8 Aug 2018 08:46:30 +0000 (11:46 +0300)]
net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap
IPv6 GRO over GRE tap is not working while GRO is not set
over the native interface.
gro_list_prepare function updates the same_flow variable
of existing sessions to 1 if their mac headers match the one
of the incoming packet.
same_flow is used to filter out non-matching sessions and keep
potential ones for aggregation.
The number of bytes to compare should be the number of bytes
in the mac headers. In gro_list_prepare this number is set to
be skb->dev->hard_header_len. For GRE interfaces this hard_header_len
should be as it is set in the initialization process (when GRE is
created), it should not be overridden. But currently it is being overridden
by the value that is actually supposed to represent the needed_headroom.
Therefore, the number of bytes compared in order to decide whether the
the mac headers are the same is greater than the length of the headers.
As it's documented in netdevice.h, hard_header_len is the maximum
hardware header length, and needed_headroom is the extra headroom
the hardware may need.
hard_header_len is basically all the bytes received by the physical
till layer 3 header of the packet received by the interface.
For example, if the interface is a GRE tap then the needed_headroom
should be the total length of the following headers:
IP header of the physical, GRE header, mac header of GRE.
It is often used to calculate the MTU of the created interface.
This patch removes the override of the hard_header_len, and
assigns the calculated value to needed_headroom.
This way, the comparison in gro_list_prepare is really of
the mac headers, and if the packets have the same mac headers
the same_flow will be set to 1.
Performance testing: 45% higher bandwidth.
Measuring bandwidth of single-stream IPv4 TCP traffic over IPv6
GRE tap while GRO is not set on the native.
NIC: ConnectX-4LX
Before (GRO not working) : 7.2 Gbits/sec
After (GRO working): 10.5 Gbits/sec
Signed-off-by: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The main motive of this patch is to lay down driver's
tc offload infrastructure in place.
With these changes tc can offload various supported flow
profiles (4 tuples, src-ip, dst-ip, l4 port) for the drop
action. Dropped flows statistic is a global counter for
all the offloaded flows for drop action and is populated
in ethtool statistics as common "gft_filter_drop".
Examples -
tc qdisc add dev p4p1 ingress
tc filter add dev p4p1 protocol ipv4 parent ffff: flower \
skip_sw ip_proto tcp dst_ip 192.168.40.200 action drop
tc filter add dev p4p1 protocol ipv4 parent ffff: flower \
skip_sw ip_proto udp src_ip 192.168.40.100 action drop
tc filter add dev p4p1 protocol ipv4 parent ffff: flower \
skip_sw ip_proto tcp src_ip 192.168.40.100 dst_ip 192.168.40.200 \
src_port 453 dst_port 876 action drop
tc filter add dev p4p1 protocol ipv4 parent ffff: flower \
skip_sw ip_proto tcp dst_port 98 action drop
Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Thu, 9 Aug 2018 18:13:49 +0000 (11:13 -0700)]
qed/qede: Multi CoS support.
This patch adds support for tc mqprio offload,
using this different traffic classes on the adapter
can be utilized based on configured priority to tc map.
This will cause SKBs with priority 0,1,2,3 to transmit
over tc 0,1,2,3 hardware queues respectively.
Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
one more set of patches for net-next. This is all sorts of cleanups and
more refactoring on the way to using netdev_priv. Please apply.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Return statements in functions returning bool should use true or false
instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 9 Aug 2018 12:48:03 +0000 (14:48 +0200)]
s390/qeth: don't restrict qeth_card to DMA memory
Allocating the main qeth_card struct with GFP_DMA blocks us from moving
it into netdev_priv(). But the only reason why we need DMA memory is the
ccw1 structs embedded into each ccw channel. So extract those into
separate allocations, like we already do for the cmd buffers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 9 Aug 2018 12:48:01 +0000 (14:48 +0200)]
s390/qeth: do basic setup for data channel
The data channel currently doesn't need a setup operation, because we
don't use pre-allocated cmd buffers for its IO. But subsequent changes
will introduce further setup that also applies to the data channel.
This refactors things a bit, so that the new stuff can then be
automatically applied to all channels.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 9 Aug 2018 18:16:29 +0000 (11:16 -0700)]
Merge branch 'Add-support-for-XGMAC2-in-stmmac'
Jose Abreu says:
====================
Add support for XGMAC2 in stmmac
This series adds support for 10Gigabit IP in stmmac. The IP is called XGMAC2
and has many similarities with GMAC4. Due to this, its relatively easy to
incorporate this new IP into stmmac driver by adding a new block and
filling the necessary callbacks.
The functionality added by this series is still reduced but its only a
starting point which will later be expanded.
I splitted the patches into funcionality and to ease the review. Only the
patch 8/9 really enables the XGMAC2 block by adding a new compatible string.
Version 4 addresses review comments of Florian Fainelli and Rob Herring.
NOTE: Although the IP supports 10G, for now it was only possible to test it
at 1G speed due to 10G PHY HW shipping problems. Here follows iperf3
results at 1G:
Jose Abreu [Wed, 8 Aug 2018 08:04:37 +0000 (09:04 +0100)]
dt-bindings: net: stmmac: Add the bindings documentation for XGMAC2.
Adds the documentation for XGMAC2 DT bindings.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 8 Aug 2018 08:04:36 +0000 (09:04 +0100)]
net: stmmac: Add the bindings parsing for XGMAC2
Add the bindings parsing for XGMAC2 IP block.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 8 Aug 2018 08:04:35 +0000 (09:04 +0100)]
net: stmmac: Integrate XGMAC into main driver flow
Now that we have all the XGMAC related callbacks, lets start integrating
this IP block into main driver.
Also, we corrected the initialization flow to only start DMA after
setting descriptors length.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 8 Aug 2018 08:04:34 +0000 (09:04 +0100)]
net: stmmac: Add PTP support for XGMAC2
XGMAC2 uses the same engine of timestamping as GMAC4. Let's use the same
callbacks.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 8 Aug 2018 08:04:33 +0000 (09:04 +0100)]
net: stmmac: Add MDIO related functions for XGMAC2
Add the MDIO related funcionalities for the new IP block XGMAC2.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 8 Aug 2018 08:04:32 +0000 (09:04 +0100)]
net: stmmac: Add descriptor related callbacks for XGMAC2
Add the descriptor related callbacks for the new IP block XGMAC2.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 8 Aug 2018 08:04:31 +0000 (09:04 +0100)]
net: stmmac: Add DMA related callbacks for XGMAC2
Add the DMA related callbacks for the new IP block XGMAC2.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 8 Aug 2018 08:04:30 +0000 (09:04 +0100)]
net: stmmac: Add MAC related callbacks for XGMAC2
Add the MAC related callbacks for the new IP block XGMAC2.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 8 Aug 2018 08:04:29 +0000 (09:04 +0100)]
net: stmmac: Add XGMAC 2.10 HWIF entry
Add a new entry to HWIF table for XGMAC 2.10. For now we fill it with
empty callbacks which will be added in posterior patches.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
More complete PHYLINK support for mv88e6xxx
Previous patches added sufficient PHYLINK support to the mv88e6xxx
that it did not break existing use cases, basically fixed-link phys.
This patchset builds out the support so that SFP modules, up to
2.5Gbps can be supported, on mv88e6390X, on ports 9 and 10. It also
provides a framework which can be extended to support SFPs on ports
2-8 of mv88e6390X, 10Gbps PHYs, and SFP support on the 6352 family.
Russell King did much of the initial work, implementing the validate
and mac_link_state calls. However, there is an important TODO in the
commit message:
needs to call phylink_mac_change() when the port link comes up/goes down.
The remaining patches implement this, by adding more support for the
SERDES interfaces, in particular, interrupt support so we get notified
when the SERDES gains/looses sync.
This has been tested on the ZII devel C, using a Clearfog as peer
device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 9 Aug 2018 13:38:49 +0000 (15:38 +0200)]
net: dsa: mv88e6xxx: Re-setup interrupts on CMODE change.
When a port changes CMODE, the SERDES interface being used can change.
Disable interrupts for the old SERDES interface, and enable interrupts
on the new.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 9 Aug 2018 13:38:48 +0000 (15:38 +0200)]
net: dsa: mv88e6xxx: Add SERDES phydev_mac_change up for 6390
phylink wants to know when the MAC layers notices a change in the
link. For the 6390 family, this is a change in the SERDES state.
Add interrupt support for the SERDES interface used to implement
SGMII/1000Base-X/2500Base-X. This is currently limited to ports 9 and
10. Support for the 10G SERDES and other ports will be added later,
building on this basic framework.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 9 Aug 2018 13:38:47 +0000 (15:38 +0200)]
net: dsa: mv88e6xxx: link mv88e6xxx_port to mv88e6xxx_chip
An up coming change will register interrupts for individual switch
ports, using the mv88e6xxx_port as the interrupt context information.
Add members to the mv88e6xxx_port structure so we can link it back to
the mv88e6xxx_chip member the port belongs to and the port number of
the port.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 9 Aug 2018 13:38:46 +0000 (15:38 +0200)]
net: dsa: mv88e6xxx: Power on/off SERDES on cmode change
The 6390 family has a number of SERDES interfaces per port. When the
cmode changes, eg 1000Base-X to XAUI, the SERDES interface in use will
also change. Power down the old SERDES interface and power up the new
SERDES interface.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 9 Aug 2018 13:38:45 +0000 (15:38 +0200)]
net: dsa: mv88e6xxx: Cache the port cmode
The ports CMODE indicates the type of link between the MAC and the
PHY. It is used often in the SERDES code. Rather than read it each
time, cache its value.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 9 Aug 2018 13:38:41 +0000 (15:38 +0200)]
net: dsa: mv88e6xxx: 6390 vs 6390X SERDES support
The 6390 has two SERDES interfaces, used by ports 9 and 10. The 6390X
has eight SERDES interfaces. These allow ports 9 and 10 to do 10G. Or
if lower speeds are used, some of the SERDES interfaces can be used by
ports 2-8 for 1000Base-X.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 9 Aug 2018 13:38:40 +0000 (15:38 +0200)]
net: dsa: mv88e6xxx: Refactor SERDES lane code
The 6390 family has 8 SERDES lanes. What ports use these lanes depends
on how ports 9 and 10 are configured. If 9 and 10 does not make use of
a line, one of the lower ports can use it.
Add a function to return the lane a port is using, if any, and simplify
the code to power up/down the lane.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Thu, 9 Aug 2018 13:38:39 +0000 (15:38 +0200)]
net: dsa: mv88e6xxx: add phylink support
Add rudimentary phylink support to mv88e6xxx.
TODO:
- needs to call phylink_mac_change() when the port link comes up/goes down.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Thu, 9 Aug 2018 13:38:38 +0000 (15:38 +0200)]
phylink: add helper for configuring 2500BaseX modes
Add a helper for MAC drivers to use in their validate callback to deal
with 2500BaseX vs 1000BaseX modes, where the hardware supports both
but it is not possible to automatically select between them.
This helper defaults to 1000BaseX, as that is the 802.3 standard, and
will allow users to select 2500BaseX either by forcing the speed if
AN is disabled, or by changing the advertising mask if AN is enabled.
Disabling AN is not recommended as it is only the speed that we're
interested in controlling, not the duplex or pause mode parameters.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 9 Aug 2018 13:38:37 +0000 (15:38 +0200)]
net: dsa: mv88e6xxx: Add support to enabling pause
The 6185 can enable/disable 802.3z pause be setting the MyPause bit in
the port status register. Add an op to support this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 9 Aug 2018 17:36:11 +0000 (10:36 -0700)]
Merge branch 'mlxsw-Various-updates'
Ido Schimmel says:
====================
mlxsw: Various updates
Patches 1-3 update the driver to use a new firmware version. Due to a
recently discovered issue, the version (and future ones) does not
support matching on VLAN ID at egress. This is enforced in the driver
and reported back to the user via extack.
Patch 4 adds a new selftest for the recently introduced algorithmic
TCAM.
Patch 5 converts the driver to use SPDX identifiers.
Patches 6-7 fix a bug in ethtool stats reporting and expose counters for
all 16 TCs, following recent MC-aware changes that utilize TCs 8-15.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 9 Aug 2018 08:59:13 +0000 (11:59 +0300)]
mlxsw: spectrum: Expose counter for all 16 TCs
Before MC-aware mode was enabled in commit 7b8195306694 ("mlxsw:
spectrum: Configure MC-aware mode on mlxsw ports"), only 8 traffic
classes were used. Under MC-aware regime, however, besides using TCs
0-7 for UC traffic, it additionally uses TCs 8-15 for BUM traffic. It
is therefore desirable to show counters for these TCs as well.
Update ethtool stats pool length, mlxsw_sp_port_get_strings() and
mlxsw_sp_port_get_stats() to include artifacts for all 16 TCs. For
consistency and simplicity, expose tc_no_buffer_discard_uc_tc for BUM
TCs as well, even though it ought to stay at 0 all the time.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 9 Aug 2018 08:59:12 +0000 (11:59 +0300)]
mlxsw: spectrum: Include RFC-2819 counters in stats length
The function mlxsw_sp_port_get_sset_count() is supposed to return the
total number of ethtool strings that mlxsw supports. Specifically for
names of statistic counters (the only string type that mlxsw supports
as of now), that number is stored in MLXSW_SP_PORT_ETHTOOL_STATS_LEN.
However, when adding RFC-2891 counters, that define wasn't updated to
include the new counters. As a result, ethtool snips out the counters
towards the end of the list, which contains per-TC counters, and only
the first three traffic classes end up being reported.
Fix by adding MLXSW_SP_PORT_HW_RFC_2819_STATS_LEN as appropriate.
Fixes: 1222d15a01c7 ("mlxsw: spectrum: Expose counters for various packet sizes") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 9 Aug 2018 08:59:09 +0000 (11:59 +0300)]
mlxsw: spectrum: Reset FW after flash
Recent FW fixes a bug and allows to load newly flashed FW image after
reset. So make sure the reset happens after flash. Indicate the need
down to PCI layer by -EAGAIN.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Thu, 9 Aug 2018 08:59:08 +0000 (11:59 +0300)]
mlxsw: spectrum: Update the supported firmware to version 13.1702.6
This new firmware contains:
- Support for new types of cables
- Support for flashing future firmware without reboot
- Support for Router ARP BC and UC traps
Signed-off-by: Nir Dotan <nird@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Thu, 9 Aug 2018 08:59:07 +0000 (11:59 +0300)]
mlxsw: spectrum_flower: Disallow usage of vlan_id key on egress
As recent spectrum FW imposes a limitation on using vlan_id key for
egress ACL, disallow the usage of that key accordingly and return a
proper extack message.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) The real fix for the ipv6 route metric leak Sabrina was seeing, from
Cong Wang.
2) Fix syzbot triggers AF_PACKET v3 ring buffer insufficient room
conditions, from Willem de Bruijn.
3) vsock can reinitialize active work struct, fix from Cong Wang.
4) RXRPC keepalive generator can wedge a cpu, fix from David Howells.
5) Fix locking in AF_SMC ioctl, from Ursula Braun.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
dsa: slave: eee: Allow ports to use phylink
net/smc: move sock lock in smc_ioctl()
net/smc: allow sysctl rmem and wmem defaults for servers
net/smc: no shutdown in state SMC_LISTEN
net: aquantia: Fix IFF_ALLMULTI flag functionality
rxrpc: Fix the keepalive generator [ver #2]
net/mlx5e: Cleanup of dcbnl related fields
net/mlx5e: Properly check if hairpin is possible between two functions
vhost: reset metadata cache when initializing new IOTLB
llc: use refcount_inc_not_zero() for llc_sap_find()
dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()
tipc: fix an interrupt unsafe locking scenario
vsock: split dwork to avoid reinitializations
net: thunderx: check for failed allocation lmac->dmacs
cxgb4: mk_act_open_req() buggers ->{local, peer}_ip on big-endian hosts
packet: refine ring v3 block size test to hold one frame
ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmit
ipv6: fix double refcount of fib6_metrics
Eli Cohen [Wed, 8 Aug 2018 23:23:53 +0000 (16:23 -0700)]
net/mlx5: Reduce command polling interval
Use cond_resched() instead of usleep_range() to decrease the time
between polling attempts thus reducing overall driver load time.
Below is a comparison before and after the change, of loading eight
virtual functions.
Before:
real 0m8.785s
user 0m0.093s
sys 0m0.090s
After:
real 0m5.730s
user 0m0.097s
sys 0m0.087s
Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Wed, 8 Aug 2018 23:23:52 +0000 (16:23 -0700)]
net/mlx5: Unexport functions that need not be exported
mlx5_query_vport_state() and mlx5_modify_vport_admin_state() are used
only from within mlx5_core - unexport them.
Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5_query_vport_admin_state() is not used anywhere. Remove it.
Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Wed, 8 Aug 2018 23:23:50 +0000 (16:23 -0700)]
net/mlx5: E-Switch, Remove unused argument when creating legacy FDB
Remove unused nvports argument.
Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Wed, 8 Aug 2018 23:23:49 +0000 (16:23 -0700)]
net/mlx5: Rename modify/query_vport state related enums
Modify and query vport state commands share the same admin_state and
op_mod values, rename the enums to fit them both.
In addition, remove the esw prefix from the admin state enum as this
also applied for vnic.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Drozdov [Wed, 8 Aug 2018 23:23:48 +0000 (16:23 -0700)]
net/mlx5: Use max_num_eqs for calculation of required MSIX vectors
New firmware has defined new HCA capability field called "max_num_eqs",
that is the number of available EQs after subtracting reserved FW EQs.
Before this capability the FW reported the EQ number in "log_max_eqs",
the reported value also contained FW reserved EQs, but the driver might
be failing to load on 320 cpus systems due to the fact that FW
reserved EQs were not available to the driver.
Now the driver has to obtain max_num_eqs value from new FW to get real
number of EQs available.
Signed-off-by: Denis Drozdov <denisd@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 8 Aug 2018 18:56:40 +0000 (20:56 +0200)]
dsa: slave: eee: Allow ports to use phylink
For a port to be able to use EEE, both the MAC and the PHY must
support EEE. A phy can be provided by both a phydev or phylink. Verify
at least one of these exist, not just phydev.
Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 9 Aug 2018 02:14:23 +0000 (19:14 -0700)]
Merge branch 'smc-fixes'
Ursula Braun says:
====================
net/smc: fixes 2018-08-08
here are small fixes for SMC: The first patch makes sure, shutdown code
is not executed for sockets in state SMC_LISTEN. The second patch resets
send and receive buffer values for accepted sockets, since TCP buffer size
optimizations for the internal CLC socket should not be forwarded to the
outer SMC socket. The third patch solves a race between connect and ioctl
reported by syzbot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Wed, 8 Aug 2018 12:13:21 +0000 (14:13 +0200)]
net/smc: move sock lock in smc_ioctl()
When an SMC socket is connecting it is decided whether fallback to
TCP is needed. To avoid races between connect and ioctl move the
sock lock before the use_fallback check.
Reported-by: syzbot+5b2cece1a8ecb2ca77d8@syzkaller.appspotmail.com Reported-by: syzbot+19557374321ca3710990@syzkaller.appspotmail.com Fixes: 1992d99882af ("net/smc: take sock lock in smc_ioctl()") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Wed, 8 Aug 2018 12:13:20 +0000 (14:13 +0200)]
net/smc: allow sysctl rmem and wmem defaults for servers
Without setsockopt SO_SNDBUF and SO_RCVBUF settings, the sysctl
defaults net.ipv4.tcp_wmem and net.ipv4.tcp_rmem should be the base
for the sizes of the SMC sndbuf and rcvbuf. Any TCP buffer size
optimizations for servers should be ignored.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Wed, 8 Aug 2018 12:13:19 +0000 (14:13 +0200)]
net/smc: no shutdown in state SMC_LISTEN
Invoking shutdown for a socket in state SMC_LISTEN does not make
sense. Nevertheless programs like syzbot fuzzing the kernel may
try to do this. For SMC this means a socket refcounting problem.
This patch makes sure a shutdown call for an SMC socket in state
SMC_LISTEN simply returns with -ENOTCONN.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Wed, 8 Aug 2018 11:06:32 +0000 (14:06 +0300)]
net: aquantia: Fix IFF_ALLMULTI flag functionality
It was noticed that NIC always pass all multicast traffic to the host
regardless of IFF_ALLMULTI flag on the interface.
The rule in MC Filter Table in NIC, that is configured to accept any
multicast packets, is turning on if IFF_MULTICAST flag is set on the
interface. It leads to passing all multicast traffic to the host.
This fix changes the condition to turn on that rule by checking
IFF_ALLMULTI flag as it should.
Fixes: b21f502f84be ("net:ethernet:aquantia: Fix for multicast filter handling.") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Wed, 8 Aug 2018 10:30:02 +0000 (11:30 +0100)]
rxrpc: Fix the keepalive generator [ver #2]
AF_RXRPC has a keepalive message generator that generates a message for a
peer ~20s after the last transmission to that peer to keep firewall ports
open. The implementation is incorrect in the following ways:
(1) It mixes up ktime_t and time64_t types.
(2) It uses ktime_get_real(), the output of which may jump forward or
backward due to adjustments to the time of day.
(3) If the current time jumps forward too much or jumps backwards, the
generator function will crank the base of the time ring round one slot
at a time (ie. a 1s period) until it catches up, spewing out VERSION
packets as it goes.
Fix the problem by:
(1) Only using time64_t. There's no need for sub-second resolution.
(2) Use ktime_get_seconds() rather than ktime_get_real() so that time
isn't perceived to go backwards.
(3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two
parts:
(a) The "worker" function that manages the buckets and the timer.
(b) The "dispatch" function that takes the pending peers and
potentially transmits a keepalive packet before putting them back
in the ring into the slot appropriate to the revised last-Tx time.
(4) Taking everything that's pending out of the ring and splicing it into
a temporary collector list for processing.
In the case that there's been a significant jump forward, the ring
gets entirely emptied and then the time base can be warped forward
before the peers are processed.
The warping can't happen if the ring isn't empty because the slot a
peer is in is keepalive-time dependent, relative to the base time.
(5) Limit the number of iterations of the bucket array when scanning it.
(6) Set the timer to skip any empty slots as there's no point waking up if
there's nothing to do yet.
This can be triggered by an incoming call from a server after a reboot with
AF_RXRPC and AFS built into the kernel causing a peer record to be set up
before userspace is started. The system clock is then adjusted by
userspace, thereby potentially causing the keepalive generator to have a
meltdown - which leads to a message like:
Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Wed, 8 Aug 2018 22:48:07 +0000 (15:48 -0700)]
net/mlx5e: Properly check if hairpin is possible between two functions
The current check relies on function BDF addresses and can get
us wrong e.g when two VFs are assigned into a VM and the PCI
v-address is set by the hypervisor.
Fixes: 5c65c564c962 ('net/mlx5e: Support offloading TC NIC hairpin flows') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Alaa Hleihel <alaa@mellanox.com> Tested-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 8 Aug 2018 03:10:39 +0000 (03:10 +0000)]
ieee802154: hwsim: fix missing unlock on error in hwsim_add_one()
Add the missing unlock before return from function hwsim_add_one()
in the error handling case.
Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 8 Aug 2018 02:43:46 +0000 (02:43 +0000)]
ieee802154: hwsim: fix copy-paste error in hwsim_set_edge_lqi()
The return value from kzalloc() is not checked correctly. The
test is done against a wrong variable. This patch fix it.
Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Tue, 7 Aug 2018 23:32:49 +0000 (19:32 -0400)]
ieee802154: hwsim: fix rcu handling
This patch adds missing rcu_assign_pointer()/rcu_dereference() to used rcu
pointers. There was already a previous commit c5d99d2b35da ("ieee802154:
hwsim: fix rcu address annotation"), but there was more which was
pointed out on my side by using newest sparse version.
Cc: Stefan Schmidt <stefan@datenfreihafen.org> Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
parisc: Define mb() and add memory barriers to assembler unlock sequences
For years I thought all parisc machines executed loads and stores in
order. However, Jeff Law recently indicated on gcc-patches that this is
not correct. There are various degrees of out-of-order execution all the
way back to the PA7xxx processor series (hit-under-miss). The PA8xxx
series has full out-of-order execution for both integer operations, and
loads and stores.
This is described in the following article:
http://web.archive.org/web/20040214092531/http://www.cpus.hp.com/technical_references/advperf.shtml
For this reason, we need to define mb() and to insert a memory barrier
before the store unlocking spinlocks. This ensures that all memory
accesses are complete prior to unlocking. The ldcw instruction performs
the same function on entry.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Helge Deller <deller@gmx.de>
Enable the -mlong-calls compiler option by default, because otherwise in most
cases linking the vmlinux binary fails due to truncations of R_PARISC_PCREL22F
relocations. This fixes building the 64-bit defconfig.
Zhao Chen [Wed, 8 Aug 2018 06:37:30 +0000 (06:37 +0000)]
net-next: hinic: fix a problem in free_tx_poll()
This patch fixes the problem below. The problem can be reproduced by the
following steps:
1) Connecting all HiNIC interfaces
2) On server side
# sudo ifconfig eth0 192.168.100.1 up #Using MLX CX4 card
# iperf -s
3) On client side
# sudo ifconfig eth0 192.168.100.2 up #Using our HiNIC card
# iperf -c 192.168.101.1 -P 10 -t 100000
after hours of testing, we will see errors:
hinic 0000:05:00.0: No MGMT msg handler, mod = 0
hinic 0000:05:00.0: No MGMT msg handler, mod = 0
hinic 0000:05:00.0: No MGMT msg handler, mod = 0
hinic 0000:05:00.0: No MGMT msg handler, mod = 0
The errors are caused by the following problem.
1) The hinic_get_wqe() checks the "wq->delta" to allocate new WQEs:
Jason Wang [Wed, 8 Aug 2018 03:43:04 +0000 (11:43 +0800)]
vhost: reset metadata cache when initializing new IOTLB
We need to reset metadata cache during new IOTLB initialization,
otherwise the stale pointers to previous IOTLB may be still accessed
which will lead a use after free.
Reported-by: syzbot+c51e6736a1bf614b3272@syzkaller.appspotmail.com Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: ethernet: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, this patchset aims
to add some annotations in order to mark switch cases where we are
expecting to fall through.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: ti: cpts: mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114813 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 141440 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: sfc: falcon: mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1384500 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: sxgbe: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1357414 ("Missing break in switch")
Addresses-Coverity-ID: 1357415 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114811 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1410181 ("Missing break in switch")
Addresses-Coverity-ID: 1410184 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1384501 ("Missing break in switch")
Addresses-Coverity-ID: 1398869 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1410182 ("Missing break in switch")
Addresses-Coverity-ID: 1410183 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comments with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Addresses-Coverity-ID: 114809 ("Missing break in switch")
Addresses-Coverity-ID: 114810 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114808 ("Missing break in switch")
Addresses-Coverity-ID: 114802 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114796 ("Missing break in switch")
Addresses-Coverity-ID: 114804 ("Missing break in switch")
Addresses-Coverity-ID: 114806 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114801 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114800 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>