Nicolas Dichtel [Tue, 6 Feb 2018 13:48:32 +0000 (14:48 +0100)]
netlink: ensure to loop over all netns in genlmsg_multicast_allns()
Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the
case when commit 134e63756d5f was pushed.
However, there was no reason to stop the loop if a netns does not have
listeners.
Returns -ESRCH only if there was no listeners in all netns.
To avoid having the same problem in the future, I didn't take the
assumption that nlmsg_multicast() returns only 0 or -ESRCH.
Fixes: 134e63756d5f ("genetlink: make netns aware") CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 8 Feb 2018 15:59:07 +0000 (15:59 +0000)]
rxrpc: Don't put crypto buffers on the stack
Don't put buffers of data to be handed to crypto on the stack as this may
cause an assertion failure in the kernel (see below). Fix this by using an
kmalloc'd buffer instead.
Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
nfp: fix disabling TC offloads in flower, max TSO segs and module version
This set corrects the way nfp deals with the NETIF_F_HW_TC flag.
It has slipped the review that flower offload does not currently
refuse disabling this flag when filter offload is active.
nfp's flower offload does not actually keep track of how many filters
for each port are offloaded. The accounting of the number of filters
is added to the nfp core structures, and BPF moved to use these
structures as well.
If users are allowed to disable TC offloads while filters are active,
not only is it incorrect behaviour, but actually the NFP will never
be told to remove the flows, leading to use-after-free when stats
arrive.
Fourth patch makes sure we declare the max number of TSO segments.
FW should drop longer packets cleanly (otherwise this would be a
security problem for untrusted VFs) but dropping longer TSO frames
is not nice and driver should prevent them from being generated.
Last small addition populates MODULE_VERSION with kernel version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:26 +0000 (20:55 -0800)]
nfp: populate MODULE_VERSION
DKMS and similar out-of-tree module replacement services use
module version to make sure the out-of-tree software is not
older than the module shipped with the kernel. We use the
kernel version in ethtool -i output, put it into MODULE_VERSION
as well.
Reported-by: Jan Gutter <jan.gutter@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:25 +0000 (20:55 -0800)]
nfp: limit the number of TSO segments
Most FWs limit the number of TSO segments a frame can produce
to 64. This is for fairness and efficiency (of FW datapath)
reasons. If a frame with larger number of segments is submitted
the FW will drop it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:24 +0000 (20:55 -0800)]
nfp: forbid disabling hw-tc-offload on representors while offload active
All netdevs which can accept TC offloads must implement
.ndo_set_features(). nfp_reprs currently do not do that, which
means hw-tc-offload can be turned on and off even when offloads
are active.
Whether the offloads are active is really a question to nfp_ports,
so remove the per-app tc_busy callback indirection thing, and
simply count the number of offloaded items in nfp_port structure.
Fixes: 8a2768732a4d ("nfp: provide infrastructure for offloading flower based TC filters") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:23 +0000 (20:55 -0800)]
nfp: don't advertise hw-tc-offload on non-port netdevs
nfp_port is a structure which represents an ASIC port, both
PCIe vNIC (on a PF or a VF) or the external MAC port. vNIC
netdev (struct nfp_net) and pure representor netdev (struct
nfp_repr) both have a pointer to this structure. nfp_reprs
always have a port associated. nfp_nets, however, only represent
a device port in legacy mode, where they are considered the
MAC port. In switchdev mode they are just the CPU's side of
the PCIe link.
By definition TC offloads only apply to device ports. Don't
set the flag on vNICs without a port (i.e. in switchdev mode).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:22 +0000 (20:55 -0800)]
nfp: bpf: require ETH table
Upcoming changes will require all netdevs supporting TC offloads
to have a full struct nfp_port. Require those for BPF offload.
The operation without management FW reporting information about
Ethernet ports is something we only support for very old and very
basic NIC firmwares anyway.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Song Liu [Wed, 7 Feb 2018 04:50:23 +0000 (20:50 -0800)]
tcp: tracepoint: only call trace_tcp_send_reset with full socket
tracepoint tcp_send_reset requires a full socket to work. However, it
may be called when in TCP_TIME_WAIT:
case TCP_TW_RST:
tcp_v6_send_reset(sk, skb);
inet_twsk_deschedule_put(inet_twsk(sk));
goto discard_it;
To avoid this problem, this patch checks the socket with sk_fullsock()
before calling trace_tcp_send_reset().
Fixes: c24b14c46bb8 ("tcp: add tracepoint trace_tcp_send_reset") Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data.
64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=22.8 ms
64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=10.9 ms
64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=10.9 ms
64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=11.4 ms
64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=4303 ms
64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.2 ms
64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.3 ms
64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=4304 ms
64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=4303 ms
Patch:
(rnd % (2 * sigma)) - sigma was overflowing s32. After applying the
patch, I found following output which is desirable.
PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data.
64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=21.1 ms
64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=8.46 ms
64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=9.00 ms
64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=8.36 ms
64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=8.11 ms
64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=10.0 ms
64 bytes from 172.16.101.2: icmp_seq=9 ttl=64 time=11.3 ms
64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.5 ms
64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.2 ms
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
It was discovered that simple program which indefinitely sends 200b UDP
packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network
watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog
timeout is triggered due to race between cpsw_ndo_start_xmit() and
cpsw_tx_handler() [NAPI]
cpsw_ndo_start_xmit()
if (unlikely(!cpdma_check_free_tx_desc(txch))) {
txq = netdev_get_tx_queue(ndev, q_idx);
netif_tx_stop_queue(txq);
^^ as per [1] barier has to be used after set_bit() otherwise new value
might not be visible to other cpus
}
cpsw_tx_handler()
if (unlikely(netif_tx_queue_stopped(txq)))
netif_tx_wake_queue(txq);
and when it happens ndev TX queue became disabled forever while driver's HW
TX queue is empty.
Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue()
calls and double check for free TX descriptors after stopping ndev TX queue
- if there are free TX descriptors wake up ndev TX queue.
[1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.html Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Tue, 6 Feb 2018 23:25:23 +0000 (17:25 -0600)]
ibmvnic: Ensure that buffers are NULL after free
This change will guard against a double free in the case that the
buffers were previously freed at some other time, such as during
a device reset. It resolves a kernel oops that occurred when changing
the VNIC device's MTU.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Allen [Tue, 6 Feb 2018 22:21:49 +0000 (16:21 -0600)]
ibmvnic: Fix rx queue cleanup for non-fatal resets
At some point, a check was added to exit the polling routine during resets.
This makes sense for most reset conditions, but for a non-fatal error, we
expect the polling routine to continue running to properly clean up the rx
queues. This patch checks if we are performing a non-fatal reset and if we
are, continues normal polling operation.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amritha Nambiar [Tue, 6 Feb 2018 21:15:20 +0000 (13:15 -0800)]
i40e: Fix the number of queues available to be mapped for use
Fix the number of queues per enabled TC and report available queues
to the kernel without having to limit them to the max RSS limit so
they are available to be mapped for XPS. This allows a queue per
processing thread available for handling traffic for the given
traffic class.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 6 Feb 2018 21:17:06 +0000 (13:17 -0800)]
net/ipv6: onlink nexthop checks should default to main table
Because of differences in how ipv4 and ipv6 handle fib lookups,
verification of nexthops with onlink flag need to default to the main
table rather than the local table used by IPv4. As it stands an
address within a connected route on device 1 can be used with
onlink on device 2. Updating the table properly rejects the route
due to the egress device mismatch.
Update the extack message as well to show it could be a device
mismatch for the nexthop spec.
Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 6 Feb 2018 20:14:12 +0000 (12:14 -0800)]
net/ipv6: Handle reject routes with onlink flag
Verification of nexthops with onlink flag need to handle unreachable
routes. The lookup is only intended to validate the gateway address
is not a local address and if the gateway resolves the egress device
must match the given device. Hence, hitting any default reject route
is ok.
Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Tue, 6 Feb 2018 19:34:23 +0000 (11:34 -0800)]
sun: Add SPDX license tags to Sun network drivers
Add the appropriate SPDX license tags to the Sun network drivers
as outlined in Documentation/process/license-rules.rst.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Tue, 6 Feb 2018 16:44:12 +0000 (16:44 +0000)]
rxrpc: Fix received abort handling
AF_RXRPC is incorrectly sending back to the server any abort it receives
for a client connection. This is due to the final-ACK offload to the
connection event processor patch. The abort code is copied into the
last-call information on the connection channel and then the event
processor is set.
Instead, the following should be done:
(1) In the case of a final-ACK for a successful call, the ACK should be
scheduled as before.
(2) In the case of a locally generated ABORT, the ABORT details should be
cached for sending in response to further packets related to that
call and no further action scheduled at call disconnect time.
(3) In the case of an ACK received from the peer, the call should be
considered dead, no ABORT should be transmitted at this time. In
response to further non-ABORT packets from the peer relating to this
call, an RX_USER_ABORT ABORT should be transmitted.
(4) In the case of a call killed due to network error, an RX_USER_ABORT
ABORT should be cached for transmission in response to further
packets, but no ABORT should be sent at this time.
Fixes: 3136ef49a14c ("rxrpc: Delay terminal ACK transmission on a client call") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit baf5086840ab1 ("cxgb4: restructure VF mgmt code") has reordered
some code but an error handling label has not been updated accordingly.
So fix it and free 'adapter' if 't4_wait_dev_ready()' fails.
Fixes: baf5086840ab1 ("cxgb4: restructure VF mgmt code") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains Netfilter fixes for you net tree, they
are:
1) Restore __GFP_NORETRY in xt_table allocations to mitigate effects of
large memory allocation requests, from Michal Hocko.
2) Release IPv6 fragment queue in case of error in fragmentation header,
this is a follow up to amend patch 83f1999caeb1, from Subash Abhinov
Kasiviswanathan.
3) Flowtable infrastructure depends on NETFILTER_INGRESS as it registers
a hook for each flowtable, reported by John Crispin.
4) Missing initialization of info->priv in xt_cgroup version 1, from
Cong Wang.
5) Give a chance to garbage collector to run after scheduling flowtable
cleanup.
6) Releasing flowtable content on nft_flow_offload module removal is
not required at all, there is not dependencies between this module
and flowtables, remove it.
7) Fix missing xt_rateest_mutex grabbing for hash insertions, also from
Cong Wang.
8) Move nf_flow_table_cleanup() routine to flowtable core, this patch is
a dependency for the next patch in this list.
9) Flowtable resources are not properly released on removal from the
control plane. Fix this resource leak by scheduling removal of all
entries and explicit call to the garbage collector.
10) nf_ct_nat_offset() declaration is dead code, this function prototype
is not used anywhere, remove it. From Taehee Yoo.
11) Fix another flowtable resource leak on entry insertion failures,
this patch also fixes a possible use-after-free. Patch from Felix
Fietkau.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Wed, 7 Feb 2018 08:49:02 +0000 (09:49 +0100)]
netfilter: nf_flow_offload: fix use-after-free and a resource leak
flow_offload_del frees the flow, so all associated resource must be
freed before.
Since the ct entry in struct flow_offload_entry was allocated by
flow_offload_alloc, it should be freed by flow_offload_free to take care
of the error handling path when flow_offload_add fails.
While at it, make flow_offload_del static, since it should never be
called directly, only from the gc step
Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Wed, 7 Feb 2018 03:57:31 +0000 (19:57 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- membarrier updates (Mathieu Desnoyers)
- SMP balancing optimizations (Mel Gorman)
- stats update optimizations (Peter Zijlstra)
- RT scheduler race fixes (Steven Rostedt)
- misc fixes and updates
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Use a recently used CPU as an idle candidate and the basis for SIS
sched/fair: Do not migrate if the prev_cpu is idle
sched/fair: Restructure wake_affine*() to return a CPU id
sched/fair: Remove unnecessary parameters from wake_affine_idle()
sched/rt: Make update_curr_rt() more accurate
sched/rt: Up the root domain ref count when passing it around via IPIs
sched/rt: Use container_of() to get root domain in rto_push_irq_work_func()
sched/core: Optimize update_stats_*()
sched/core: Optimize ttwu_stat()
membarrier/selftest: Test private expedited sync core command
membarrier/arm64: Provide core serializing command
membarrier/x86: Provide core serializing command
membarrier: Provide core serializing command, *_SYNC_CORE
lockin/x86: Implement sync_core_before_usermode()
locking: Introduce sync_core_before_usermode()
membarrier/selftest: Test global expedited command
membarrier: Provide GLOBAL_EXPEDITED command
membarrier: Document scheduler barrier requirements
powerpc, membarrier: Skip memory barrier in switch_mm()
membarrier/selftest: Test private expedited command
Linus Torvalds [Wed, 7 Feb 2018 03:28:19 +0000 (19:28 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixlets from Ingo Molnar:
"An endianness fix and a jump labels branch hint update"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/qrwlock: include asm/byteorder.h as needed
jump_label: Add branch hints to static_branch_{un,}likely()
1) Fix error path in netdevsim, from Jakub Kicinski.
2) Default values listed in tcp_wmem and tcp_rmem documentation were
inaccurate, from Tonghao Zhang.
3) Fix route leaks in SCTP, both for ipv4 and ipv6. From Alexey Kodanev
and Tommi Rantala.
4) Fix "MASK < Y" meant to be "MASK << Y" in xgbe driver, from Wolfram
Sang.
5) Use after free in u32_destroy_key(), from Paolo Abeni.
6) Fix two TX issues in be2net driver, from Suredh Reddy.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
be2net: Handle transmit completion errors in Lancer
be2net: Fix HW stall issue in Lancer
RDS: IB: Fix null pointer issue
nfp: fix kdoc warnings on nested structures
sample/bpf: fix erspan metadata
net: erspan: fix erspan config overwrite
net: erspan: fix metadata extraction
cls_u32: fix use after free in u32_destroy_key()
net: amd-xgbe: fix comparison to bitshift when dealing with a mask
net: phy: Handle not having GPIO enabled in the kernel
ibmvnic: fix empty firmware version and errors cleanup
sctp: fix dst refcnt leak in sctp_v4_get_dst
sctp: fix dst refcnt leak in sctp_v6_get_dst()
dwc-xlgmac: remove Jie Deng as co-maintainer
doc: Change the min default value of tcp_wmem/tcp_rmem.
samples/bpf: use bpf_set_link_xdp_fd
libbpf: add missing SPDX-License-Identifier
libbpf: add error reporting in XDP
libbpf: add function to setup XDP
tools: add netlink.h and if_link.h in tools uapi
...
Joe Perches [Tue, 6 Feb 2018 23:42:41 +0000 (15:42 -0800)]
MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns
Commit 321737416c72d ("tty: serial: msm: Move header file into driver")
removed the .h file, update the patterns.
Link: http://lkml.kernel.org/r/2b7478bc4c35ab3ac6b06b4edd3b645a8c34a4a2.1517147485.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 6 Feb 2018 23:42:37 +0000 (15:42 -0800)]
MAINTAINERS: update various PALM patterns
Commit 4c25c5d2985c ("ARM: pxa: make more mach/*.h files local") moved
the files around, update the patterns.
Link: http://lkml.kernel.org/r/a291f6f61e378a1f35e266fe4c5f646b9feeaa6a.1517147485.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tomas Cech <sleep_walker@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9e6c62b05c1b ("ARM: dts: rename oxnas dts files") renamed the
files, update the patterns.
[akpm@linux-foundation.org: crunch into a single globbed term, per Arnd] Link: http://lkml.kernel.org/r/b39d779e143b3c0a4e7dff827346e509447e3e8e.1517147485.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Golle <daniel@makrotopia.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 6 Feb 2018 23:42:30 +0000 (15:42 -0800)]
MAINTAINERS: update Cortina/Gemini patterns
Commit 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit
ethernet") added invalid patterns. Fix it.
Link: http://lkml.kernel.org/r/65b104609e0071d0fbe0dcce3a8e6138a4cf8c25.1517147485.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:42:08 +0000 (15:42 -0800)]
pipe: read buffer limits atomically
The pipe buffer limits are accessed without any locking, and may be
changed at any time by the sysctl handlers. In theory this could cause
problems for expressions like the following:
... since the assembly code might reference the 'pipe_user_pages_hard'
memory location multiple times, and if the admin removes the limit by
setting it to 0, there is a very brief window where processes could
incorrectly observe the limit to be exceeded.
Fix this by loading the limits with READ_ONCE() prior to use.
Link: http://lkml.kernel.org/r/20180111052902.14409-8-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:42:05 +0000 (15:42 -0800)]
pipe: simplify round_pipe_size()
round_pipe_size() calculates the number of pages the requested size
corresponds to, then rounds the page count up to the next power of 2.
However, it also rounds everything < PAGE_SIZE up to PAGE_SIZE.
Therefore, there's no need to actually translate the size into a page
count; we just need to round the size up to the next power of 2.
We do need to verify the size isn't greater than (1 << 31), since on
32-bit systems roundup_pow_of_two() would be undefined in that case. But
that can just be combined with the UINT_MAX check which we need anyway
now.
Finally, update pipe_set_size() to not redundantly check the return value
of round_pipe_size() for the "invalid size" case twice.
Link: http://lkml.kernel.org/r/20180111052902.14409-7-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:42:00 +0000 (15:42 -0800)]
pipe: reject F_SETPIPE_SZ with size over UINT_MAX
A pipe's size is represented as an 'unsigned int'. As expected, writing a
value greater than UINT_MAX to /proc/sys/fs/pipe-max-size fails with
EINVAL. However, the F_SETPIPE_SZ fcntl silently truncates such values to
32 bits, rather than failing with EINVAL as expected. (It *does* fail
with EINVAL for values above (1 << 31) but <= UINT_MAX.)
Fix this by moving the check against UINT_MAX into round_pipe_size() which
is called in both cases.
Link: http://lkml.kernel.org/r/20180111052902.14409-6-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:41:53 +0000 (15:41 -0800)]
pipe: actually allow root to exceed the pipe buffer limits
pipe-user-pages-hard and pipe-user-pages-soft are only supposed to apply
to unprivileged users, as documented in both Documentation/sysctl/fs.txt
and the pipe(7) man page.
However, the capabilities are actually only checked when increasing a
pipe's size using F_SETPIPE_SZ, not when creating a new pipe. Therefore,
if pipe-user-pages-hard has been set, the root user can run into it and be
unable to create pipes. Similarly, if pipe-user-pages-soft has been set,
the root user can run into it and have their pipes limited to 1 page each.
Fix this by allowing the privileged override in both cases.
Link: http://lkml.kernel.org/r/20180111052902.14409-4-ebiggers3@gmail.com Fixes: 759c01142a5d ("pipe: limit the per-user amount of pages allocated in pipes") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:41:49 +0000 (15:41 -0800)]
pipe, sysctl: remove pipe_proc_fn()
pipe_proc_fn() is no longer needed, as it only calls through to
proc_dopipe_max_size(). Just put proc_dopipe_max_size() in the ctl_table
entry directly, and remove the unneeded EXPORT_SYMBOL() and the ENOSYS
stub for it.
(The reason the ENOSYS stub isn't needed is that the pipe-max-size
ctl_table entry is located directly in 'kern_table' rather than being
registered separately. Therefore, the entry is already only defined when
the kernel is built with sysctl support.)
Link: http://lkml.kernel.org/r/20180111052902.14409-3-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:41:45 +0000 (15:41 -0800)]
pipe, sysctl: drop 'min' parameter from pipe-max-size converter
Patch series "pipe: buffer limits fixes and cleanups", v2.
This series simplifies the sysctl handler for pipe-max-size and fixes
another set of bugs related to the pipe buffer limits:
- The root user wasn't allowed to exceed the limits when creating new
pipes.
- There was an off-by-one error when checking the limits, so a limit of
N was actually treated as N - 1.
- F_SETPIPE_SZ accepted values over UINT_MAX.
- Reading the pipe buffer limits could be racy.
This patch (of 7):
Before validating the given value against pipe_min_size,
do_proc_dopipe_max_size_conv() calls round_pipe_size(), which rounds the
value up to pipe_min_size. Therefore, the second check against
pipe_min_size is redundant. Remove it.
Link: http://lkml.kernel.org/r/20180111052902.14409-2-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 6 Feb 2018 23:41:41 +0000 (15:41 -0800)]
kasan: rework Kconfig settings
We get a lot of very large stack frames using gcc-7.0.1 with the default
-fsanitize-address-use-after-scope --param asan-stack=1 options, which can
easily cause an overflow of the kernel stack, e.g.
drivers/gpu/drm/i915/gvt/handlers.c:2434:1: warning: the frame size of 46176 bytes is larger than 3072 bytes
drivers/net/wireless/ralink/rt2x00/rt2800lib.c:5650:1: warning: the frame size of 23632 bytes is larger than 3072 bytes
lib/atomic64_test.c:250:1: warning: the frame size of 11200 bytes is larger than 3072 bytes
drivers/gpu/drm/i915/gvt/handlers.c:2621:1: warning: the frame size of 9208 bytes is larger than 3072 bytes
drivers/media/dvb-frontends/stv090x.c:3431:1: warning: the frame size of 6816 bytes is larger than 3072 bytes
fs/fscache/stats.c:287:1: warning: the frame size of 6536 bytes is larger than 3072 bytes
To reduce this risk, -fsanitize-address-use-after-scope is now split out
into a separate CONFIG_KASAN_EXTRA Kconfig option, leading to stack
frames that are smaller than 2 kilobytes most of the time on x86_64. An
earlier version of this patch also prevented combining KASAN_EXTRA with
KASAN_INLINE, but that is no longer necessary with gcc-7.0.1.
All patches to get the frame size below 2048 bytes with CONFIG_KASAN=y
and CONFIG_KASAN_EXTRA=n have been merged by maintainers now, so we can
bring back that default now. KASAN_EXTRA=y still causes lots of
warnings but now defaults to !COMPILE_TEST to disable it in
allmodconfig, and it remains disabled in all other defconfigs since it
is a new option. I arbitrarily raise the warning limit for KASAN_EXTRA
to 3072 to reduce the noise, but an allmodconfig kernel still has around
50 warnings on gcc-7.
I experimented a bit more with smaller stack frames and have another
follow-up series that reduces the warning limit for 64-bit architectures
to 1280 bytes (without CONFIG_KASAN).
With earlier versions of this patch series, I also had patches to address
the warnings we get with KASAN and/or KASAN_EXTRA, using a
"noinline_if_stackbloat" annotation.
That annotation now got replaced with a gcc-8 bugfix (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715) and a workaround for
older compilers, which means that KASAN_EXTRA is now just as bad as
before and will lead to an instant stack overflow in a few extreme
cases.
This reverts parts of commit 3f181b4d8652 ("lib/Kconfig.debug: disable
-Wframe-larger-than warnings with KASAN=y"). Two patches in linux-next
should be merged first to avoid introducing warnings in an allmodconfig
build: 3cd890dbe2a4 ("media: dvb-frontends: fix i2c access helpers for KASAN") 16c3ada89cff ("media: r820t: fix r820t_write_reg for KASAN")
Do we really need to backport this?
I think we do: without this patch, enabling KASAN will lead to
unavoidable kernel stack overflow in certain device drivers when built
with gcc-7 or higher on linux-4.10+ or any version that contains a
backport of commit c5caf21ab0cf8. Most people are probably still on
older compilers, but it will get worse over time as they upgrade their
distros.
The warnings we get on kernels older than this should all be for code
that uses dangerously large stack frames, though most of them do not
cause an actual stack overflow by themselves.The asan-stack option was
added in linux-4.0, and commit 3f181b4d8652 ("lib/Kconfig.debug:
disable -Wframe-larger-than warnings with KASAN=y") effectively turned
off the warning for allmodconfig kernels, so I would like to see this
fix backported to any kernels later than 4.0.
I have done dozens of fixes for individual functions with stack frames
larger than 2048 bytes with asan-stack, and I plan to make sure that
all those fixes make it into the stable kernels as well (most are
already there).
Part of the complication here is that asan-stack (from 4.0) was
originally assumed to always require much larger stacks, but that
turned out to be a combination of multiple gcc bugs that we have now
worked around and fixed, but sanitize-address-use-after-scope (from
v4.10) has a much higher inherent stack usage and also suffers from at
least three other problems that we have analyzed but not yet fixed
upstream, each of them makes the stack usage more severe than it should
be.
The file was converted from print_symbol() to %pf some time ago in
commit ef26f20cd117 ("genirq: Print threaded handler in spurious debug
output"). kallsyms does not seem to be needed anymore.
Link: http://lkml.kernel.org/r/20171208025616.16267-10-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The file was converted from print_symbol() to %pSR a while ago in commit 071361d3473e ("mm: Convert print_symbol to %pSR"). kallsyms does not
seem to be needed anymore.
Shakeel Butt [Tue, 6 Feb 2018 23:40:59 +0000 (15:40 -0800)]
vfs: remove might_sleep() from clear_inode()
Commit 7994e6f72543 ("vfs: Move waiting for inode writeback from
end_writeback() to evict_inode()") removed inode_sync_wait() from
end_writeback() and commit dbd5768f87ff ("vfs: Rename end_writeback() to
clear_inode()") renamed end_writeback() to clear_inode().
After these patches there is no sleeping operation in clear_inode().
So, remove might_sleep() from it.
Link: http://lkml.kernel.org/r/20171108004354.40308-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Greg Thelen <gthelen@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jonathan Haws [Tue, 6 Feb 2018 23:40:52 +0000 (15:40 -0800)]
ipc/mqueue.c: have RT tasks queue in by priority in wq_add()
Previous behavior added tasks to the work queue using the static_prio
value instead of the dynamic priority value in prio. This caused RT tasks
to be added to the work queue in a FIFO manner rather than by priority.
Normal tasks were handled by priority.
This fix utilizes the dynamic priority of the task to ensure that both RT
and normal tasks are added to the work queue in priority order. Utilizing
the dynamic priority (prio) rather than the base priority (normal_prio)
was chosen to ensure that if a task had a boosted priority when it was
added to the work queue, it would be woken sooner to to ensure that it
releases any other locks it may be holding in a more timely manner. It is
understood that the task could have a lower priority when it wakes than
when it was added to the queue in this (unlikely) case.
Link: http://lkml.kernel.org/r/1513006652-7014-1-git-send-email-jhaws@sdl.usu.edu Signed-off-by: Jonathan Haws <jhaws@sdl.usu.edu> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As described in the title, this patch fixes <ipc>id_ds inconsistency when
<ipc>ctl_stat executes concurrently with some ds-changing function, e.g.
shmat, msgsnd or whatever.
For instance, if shmctl(IPC_STAT) is running concurrently
with shmat, following data structure can be returned:
{... shm_lpid = 0, shm_nattch = 1, ...}
Link: http://lkml.kernel.org/r/20171202153456.6514-1-philippe.mikoyan@skat.systems Signed-off-by: Philippe Mikoyan <philippe.mikoyan@skat.systems> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similarly to type mismatch checks, new GCC 8.x and Clang also changed for
ABI for returns_nonnull checks. While we can update our code to conform
the new ABI it's more reasonable to just remove it. Because it's just
dead code, we don't have any single user of returns_nonnull attribute in
the whole kernel.
And AFAIU the advantage that this attribute could bring would be mitigated
by -fno-delete-null-pointer-checks cflag that we use to build the kernel.
So it's unlikely we will have a lot of returns_nonnull attribute in
future.
Andrey Ryabinin [Tue, 6 Feb 2018 23:40:42 +0000 (15:40 -0800)]
lib/ubsan: add type mismatch handler for new GCC/Clang
UBSAN=y fails to build with new GCC/clang:
arch/x86/kernel/head64.o: In function `sanitize_boot_params':
arch/x86/include/asm/bootparam_utils.h:37: undefined reference to `__ubsan_handle_type_mismatch_v1'
because Clang and GCC 8 slightly changed ABI for 'type mismatch' errors.
Compiler now uses new __ubsan_handle_type_mismatch_v1() function with
slightly modified 'struct type_mismatch_data'.
Let's add new 'struct type_mismatch_data_common' which is independent from
compiler's layout of 'struct type_mismatch_data'. And make
__ubsan_handle_type_mismatch[_v1]() functions transform compiler-dependent
type mismatch data to our internal representation. This way, we can
support both old and new compilers with minimal amount of change.
Dmitry Vyukov [Tue, 6 Feb 2018 23:40:28 +0000 (15:40 -0800)]
kcov: detect double association with a single task
Currently KCOV_ENABLE does not check if the current task is already
associated with another kcov descriptor. As the result it is possible
to associate a single task with more than one kcov descriptor, which
later leads to a memory leak of the old descriptor. This relation is
really meant to be one-to-one (task has only one back link).
Arnd Bergmann [Tue, 6 Feb 2018 23:40:21 +0000 (15:40 -0800)]
pps: parport: use timespec64 instead of timespec
getnstimeofday() is deprecated, so I'm converting this to use
ktime_get_real_ts64() as a safe replacement. I considered using
ktime_get_real() instead, but since the algorithm here depends on the
exact timing, I decided to introduce fewer changes and leave the code
that determines the nanoseconds since the last seconds wrap untouched.
It's not entirely clear to me whether we should also change the time
base to CLOCK_BOOTTIME or CLOCK_TAI. With boottime, we would be
independent of changes due to settimeofday() and only see the speed
adjustment from the upstream clock source, with the downside of having
the signal be at an arbirary offset from the start of the UTC second
signal. With CLOCK_TAI, we would use the same offset from the UTC
second as before and still suffer from settimeofday() adjustments, but
would be less confused during leap seconds.
Both boottime and tai only offer usable (i.e. avoiding ktime_t to
timespec64 conversion) interfaces for ktime_t though, so either way,
changing it wouldn't take significantly more work. CLOCK_MONOTONIC
could be used with ktime_get_ts64(), but would lose synchronization
across a suspend/resume cycle, which seems worse.
Markus Elfring [Tue, 6 Feb 2018 23:39:51 +0000 (15:39 -0800)]
rapidio: improve a size determination in five functions
Replace the specification of data structures by pointer dereferences as
the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style
convention.
This issue was detected by using the Coccinelle software.
Link: http://lkml.kernel.org/r/495f571c-fb4d-b1d5-a6e5-494f2c537a8d@users.sourceforge.net Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thus reducing one indentation level while maintaining the same rationale.
Link: http://lkml.kernel.org/r/20171117002929.5155-1-marcos.souza.org@gmail.com Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Tue, 6 Feb 2018 23:39:27 +0000 (15:39 -0800)]
<asm-generic/siginfo.h>: fix language in comments
Fix grammar and add an omitted word.
Link: http://lkml.kernel.org/r/1a5a021c-0207-f793-7f07-addca26772d5@infradead.org Fixes: f9886bc50a8e ("signal: Document the strange si_codes used by ptrace event stops") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When creating a file inside a directory that has the setgid flag set, give
the new file the group ID of the parent, and also the setgid flag if it is
a directory itself.
Link: http://lkml.kernel.org/r/20171204192705.GA6101@debian.home Signed-off-by: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com> Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 6 Feb 2018 23:39:21 +0000 (15:39 -0800)]
nilfs2: use time64_t internally
The superblock and segment timestamps are used only internally in nilfs2
and can be read out using sysfs.
Since we are using the old 'get_seconds()' interface and store the data
as timestamps, the behavior differs slightly between 64-bit and 32-bit
kernels, the latter will show incorrect timestamps after 2038 in sysfs,
and presumably fail completely in 2106 as comparisons go wrong.
This changes nilfs2 to use time64_t with ktime_get_real_seconds() to
handle timestamps, making the behavior consistent and correct on both
32-bit and 64-bit machines.
The on-disk format already uses 64-bit timestamps, so nothing changes
there.
Link: http://lkml.kernel.org/r/20180122211050.1286441-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Tue, 6 Feb 2018 23:39:13 +0000 (15:39 -0800)]
elf: fix NT_FILE integer overflow
If vm.max_map_count bumped above 2^26 (67+ mil) and system has enough RAM
to allocate all the VMAs (~12.8 GB on Fedora 27 with 200-byte VMAs), then
it should be possible to overflow 32-bit "size", pass paranoia check,
allocate very little vmalloc space and oops while writing into vmalloc
guard page...
But I didn't test this, only coredump of regular process.
Joe Perches [Tue, 6 Feb 2018 23:39:06 +0000 (15:39 -0800)]
checkpatch: avoid some false positives for TABSTOP declaration test
Using an open bracket after what seems to be a declaration can also be a
function definition and declaration argument line continuation so remove
the open bracket from the possible declaration/definition matching.
e.g.:
int foobar(int a;
int *b[]);
Link: http://lkml.kernel.org/r/1515704479.9619.171.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 6 Feb 2018 23:39:03 +0000 (15:39 -0800)]
checkpatch: exclude drivers/staging from if with unnecessary parentheses test
Greg KH doesn't like this test so exclude the staging directory from the
implied --strict only test unless --strict is actually used on the
command-line.
Link: http://lkml.kernel.org/r/1515704034.9619.165.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow lines with URL to exceed the 80 char limit for improved interaction
in adaption to ongoing but undocumented practice.
$ git grep -E '://\S{77}.*' -- '*.[ch]'
As per RFC3986 [1], the URL format allows for alphanum, +, - and .
characters in the scheme before the separator :// as long as it starts
with a letter (e.g. https, git, f.-+).
Recognition of URIs without more context information is prone to false
positives and thus currently left out of the heuristics.
$rawline is used in the check as comments are removed from $line.
Pravin Shedge [Tue, 6 Feb 2018 23:38:42 +0000 (15:38 -0800)]
lib/test_sort.c: add module unload support
test_sort.c performs array-based and linked list sort test. Code allows
to compile either as a loadable modules or builtin into the kernel.
Current code is not allow to unload the test_sort.ko module after
successful completion.
This patch adds support to unload the "test_sort.ko" module by adding
module_exit support.
Previous patch was implemented auto unload support by returning -EAGAIN
from module_init() function on successful case, but this approach is not
ideal.
The auto-unload might seem like a nice optimization, but it encourages
inconsistent behaviour. And behaviour that is different from all other
normal modules.
Link: http://lkml.kernel.org/r/1513967133-6843-1-git-send-email-pravin.shedge4linux@gmail.com Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Cc: Kostenzer Felix <fkostenzer@live.at> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vincent Legoll [Tue, 6 Feb 2018 23:38:38 +0000 (15:38 -0800)]
lib/: make RUNTIME_TESTS a menuconfig to ease disabling it all
No need to get into the submenu to disable all related config entries.
This makes it easier to disable all RUNTIME_TESTS config options without
entering the submenu. It will also enable one to see that en/dis-abled
state from the outside menu.
This is only intended to change menuconfig UI, not change the config
dependencies.
Link: http://lkml.kernel.org/r/20171209162742.7363-1-vincent.legoll@gmail.com Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clement Courbet [Tue, 6 Feb 2018 23:38:34 +0000 (15:38 -0800)]
lib: optimize cpumask_next_and()
We've measured that we spend ~0.6% of sys cpu time in cpumask_next_and().
It's essentially a joined iteration in search for a non-zero bit, which is
currently implemented as a lookup join (find a nonzero bit on the lhs,
lookup the rhs to see if it's set there).
Implement a direct join (find a nonzero bit on the incrementally built
join). Also add generic bitmap benchmarks in the new `test_find_bit`
module for new function (see `find_next_and_bit` in [2] and [3] below).
For cpumask_next_and, direct benchmarking shows that it's 1.17x to 14x
faster with a geometric mean of 2.1 on 32 CPUs [1]. No impact on memory
usage. Note that on Arm, the new pure-C implementation still outperforms
the old one that uses a mix of C and asm (`find_next_bit`) [3].
[1] Approximate benchmark code:
```
unsigned long src1p[nr_cpumask_longs] = {pattern1};
unsigned long src2p[nr_cpumask_longs] = {pattern2};
for (/*a bunch of repetitions*/) {
for (int n = -1; n <= nr_cpu_ids; ++n) {
asm volatile("" : "+rm"(src1p)); // prevent any optimization
asm volatile("" : "+rm"(src2p));
unsigned long result = cpumask_next_and(n, src1p, src2p);
asm volatile("" : "+rm"(result));
}
}
```
Yury Norov [Tue, 6 Feb 2018 23:38:31 +0000 (15:38 -0800)]
lib/find_bit_benchmark.c: improvements
As suggested in review comments:
* printk: align numbers using whitespaces instead of tabs;
* return error value from init() to avoid calling rmmod if testing again;
* use ktime_get instead of get_cycles as some arches don't support it;