Takashi Iwai [Mon, 21 Aug 2017 14:13:27 +0000 (16:13 +0200)]
ALSA: ice1712: Add support for STAudio ADCIII
STAudio ADCIII has the same SSID as Hoontech STDSP24, but requires a
slightly different configuration. This patch allows user to choose
this model via model=staudio option to set the proper configuration
for the board.
Takashi Iwai [Tue, 22 Aug 2017 06:15:13 +0000 (08:15 +0200)]
ALSA: core: Fix unexpected error at replacing user TLV
When user tries to replace the user-defined control TLV, the kernel
checks the change of its content via memcmp(). The problem is that
the kernel passes the return value from memcmp() as is. memcmp()
gives a non-zero negative value depending on the comparison result,
and this shall be recognized as an error code.
The patch covers that corner-case, return 1 properly for the changed
TLV.
Fixes: 8aa9b586e420 ("[ALSA] Control API - more robust TLV implementation") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Joakim Tjernlund [Tue, 22 Aug 2017 06:33:53 +0000 (08:33 +0200)]
ALSA: usb-audio: Add delay quirk for H650e/Jabra 550a USB headsets
These headsets reports a lot of: cannot set freq 44100 to ep 0x81
and need a small delay between sample rate settings, just like
Zoom R16/24. Add both headsets to the Zoom R16/24 quirk for
a 1 ms delay between control msgs.
Takashi Sakamoto [Sun, 20 Aug 2017 12:25:04 +0000 (21:25 +0900)]
ALSA: firewire-motu: add support for MOTU Audio Express
MOTU Audio Express is one of third generation in MOTU FireWire
series, produced in 2011. This model consists of three chips:
* TI TSB41AB2 (Physical layer for IEEE 1394 bus)
* Microchip USB3300 (Hi-Speed USB Device with ULPI interface)
* Xilinx Spartan-3A FPGA, XC3S400A (Link layer for IEEE 1394 bus, packet
processing and data block processing layer)
This commit adds support for this model. As I expected, it works with
current implementaion of protocol version 3. On the other hand, the unit
has a quirk to request subaction originated by any driver.
11:45:51.287643 firewire_ohci 0000:03:00.0: AT spd 2 tl 1f, ffc1 -> ffc0, -reserved-, QW req, fffff0000b14 = 02000200
11:45:51.289193 firewire_ohci 0000:03:00.0: AR spd 2 tl 1f, ffc0 -> ffc1, ack_complete, W resp
11:45:51.289381 fireire_core 0000:03:00.0: unsolicited response (source ffc0, tlabel 1f)
11:45:51.313071 firewire_ohci 0000:03:00.0: AT spd 2 tl 20, ffc1 -> ffc0, ack_pending , QW req, fffff0000b14 = 02000200
11:45:51.314539 firewire_ohci 0000:03:00.0: AR spd 2 tl 20, ffc0 -> ffc1, ack_complete, W resp
In 1394 OHCI (rev.1.1), after OUTPUT_LAST* descriptors is processed,
'xferStaus' field is filled with 'ContextControl[0:15]' (see clause 7.1.3).
5 bits in LSB side of the field has ack code in acknowledge from the unit
(see clause 7.2.2). A list of the code is shown in Table 3-2.
As long as I investigated, in a case of the '-reserved-' acknowledge
message from the unit, the field has 0x10. On the table, this value is
'Reserved for definition by future 1394 standards'. As long as I know,
any specifications of IEEE 1394 has no such extensions, thus the unit is
out of specification. Besides, I note that the unit does not always
acknowledge with the invalid code. I guess this is a bug of firmware. I
confirmed the bug in firmware version 1.04 and this is the latest one.
root directory
-----------------------------------------------------------------
414 0004ef04 directory_length 4, crc 61188
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 d1000002 --> unit directory at 428
424 8d000005 --> eui-64 leaf at 438
unit directory at 428
-----------------------------------------------------------------
428 00031680 directory_length 3, crc 5760
42c 120001f2 specifier id
430 13000033 version
434 17104800 model
Takashi Sakamoto [Sun, 20 Aug 2017 12:25:03 +0000 (21:25 +0900)]
ALSA: firewire-motu: add specification flag for position of flag for MIDI messages
In protocols of MOTU FireWire series, when transferring MIDI messages,
transmitter set existence flag to one byte on first several quadlets. The
position differs depending on protocols and models, however two cases are
confirmed; in 5th byte and 8th byte from MSB side.
This commit adds a series of specification flag to describe them. When
the existence flag is in the 5th byte, SND_MOTU_SPEC_[R|T]X_MIDI_2ND_Q is
used. Else, another set of the flag is used. Here, '_Q' means quadlet.
Takashi Sakamoto [Sun, 20 Aug 2017 06:54:26 +0000 (15:54 +0900)]
ALSA: firewire: fix NULL pointer dereference when releasing uninitialized data of iso-resource
When calling 'iso_resource_free()' for uninitialized data, this function
causes NULL pointer dereference due to its 'unit' member. This occurs when
unplugging audio and music units on IEEE 1394 bus at failure of card
registration.
This commit fixes the bug. The bug exists since kernel v4.5.
Fixes: 324540c4e05c ('ALSA: fireface: postpone sound card registration') at v4.12 Fixes: 8865a31e0fd8 ('ALSA: firewire-motu: postpone sound card registration') at v4.12 Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card') at v4.7 Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card') at v4.7 Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') at v4.7 Fixes: 7d3c1d5901aa ('ALSA: fireworks: delayed registration of sound card') at v4.7 Fixes: 04a2c73c97eb ('ALSA: bebob: delayed registration of sound card') at v4.7 Fixes: b59fb1900b4f ('ALSA: dice: postpone card registration') at v4.5 Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Sun, 20 Aug 2017 04:49:08 +0000 (13:49 +0900)]
ALSA: control: use counting semaphore as write lock for ELEM_WRITE operation
In ALSA control interface, applications can execute two types of request
for value of members on each element; ELEM_READ and ELEM_WRITE. In ALSA
control core, these two requests are handled within read lock of a
counting semaphore, therefore several processes can run to execute these
two requests at the same time. This has an issue because ELEM_WRITE
requests have an effect to change state of the target element. Concurrent
access should be controlled for each of ELEM_READ/ELEM_WRITE case.
This commit uses the counting semaphore as write lock for ELEM_WRITE
requests, while use it as read lock for ELEM_READ requests. The state of
a target element is maintained exclusively between ELEM_WRITE/ELEM_READ
operations.
There's a concern. If the counting semaphore is acquired for read lock
in implementations of 'struct snd_kcontrol.put()' in each driver, this
commit shall cause dead lock. As of v4.13-rc5, 'snd-mixer-oss.ko',
'snd-emu10k1.ko' and 'snd-soc-sst-atom-hifi2-platform.ko' includes codes
for read locks, but these are not in a call graph from
'struct snd_kcontrol.put(). Therefore, this commit is safe.
In current implementation, the same solution is applied for the other
operations to element; e.g. ELEM_LOCK and ELEM_UNLOCK. There's another
discussion about an overhead to maintain concurrent access to an element
during operating the other elements on the same card instance, because the
lock primitive is originally implemented to maintain a list of elements on
the card instance. There's a substantial difference between
per-element-list lock and per-element lock.
Here, let me investigate another idea to add per-element lock to maintain
the concurrent accesses with inquiry/change requests to an element. It's
not so frequent for applications to operate members on elements, while
adding a new lock primitive to structure increases memory footprint for
all of element sets somehow. Experimentally, inquiry operation is more
frequent than change operation and usage of counting semaphore for the
inquiry operation brings no blocking to the other inquiry operations. Thus
the overhead is not so critical for usual applications. For the above
reasons, in this commit, the per-element lock is not introduced.
Takashi Sakamoto [Sun, 20 Aug 2017 04:49:07 +0000 (13:49 +0900)]
ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations
ALSA control core handles ELEM_READ/ELEM_WRITE requests within lock
acquisition of a counting semaphore. The lock is acquired in helper
functions in the end of call path before calling implementations of each
driver.
Takashi Sakamoto [Sun, 20 Aug 2017 04:49:06 +0000 (13:49 +0900)]
ALSA: control: queue events within locking of controls_rwsem for ELEM_WRITE operation
Any control event is queued by a call of snd_ctl_notify(). This function
adds the event to each queue of opened file data corresponding to ALSA
control character devices. This function acquired two types of lock; a
counting semaphore for a list of the opened file data and a spinlock for
card data opened by the file. Typically, this function is called after
acquiring a counting semaphore for a list of elements in the card data.
In current implementation of a handler for ELEM_WRITE request, the
function is called after releasing the semaphore for a list of elements
in the card data. This release is not necessarily needed.
This commit removes the release to call the function within the critical
section so that later commits are simple.
Arvind Yadav [Fri, 18 Aug 2017 07:45:21 +0000 (13:15 +0530)]
ALSA: usb: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:20 +0000 (13:15 +0530)]
ALSA: spi: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:19 +0000 (13:15 +0530)]
ALSA: sparc: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:18 +0000 (13:15 +0530)]
ALSA: sh: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:17 +0000 (13:15 +0530)]
ALSA: ppc: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:16 +0000 (13:15 +0530)]
ALSA: pcmcia: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:15 +0000 (13:15 +0530)]
ALSA: parisc: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:14 +0000 (13:15 +0530)]
ALSA: mips: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:13 +0000 (13:15 +0530)]
ALSA: firewire: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:12 +0000 (13:15 +0530)]
ALSA: drivers: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:11 +0000 (13:15 +0530)]
ALSA: atmel: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:10 +0000 (13:15 +0530)]
ALSA: arm: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 18 Aug 2017 07:45:09 +0000 (13:15 +0530)]
ALSA: aoa: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Takashi Iwai [Fri, 18 Aug 2017 08:55:10 +0000 (10:55 +0200)]
ALSA: emu10k1: Fix forgotten user-copy conversion in init code
The commit d42fe63d5839 ("ALSA: emu10k1: Get rid of set_fs() usage")
converted the user-space copy hack with set_fs() to the direct
memcpy(), but one place was forgotten. This resulted in the error
from snd_emu10k1_init_efx(), eventually failed to load the driver.
Fix the missing piece.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196687 Fixes: d42fe63d5839 ("ALSA: emu10k1: Get rid of set_fs() usage") Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stephen Barber [Thu, 17 Aug 2017 22:17:46 +0000 (15:17 -0700)]
ALSA: usb-audio: don't retry snd_usb_ctl_msg after timeout
A few calls to snd_usb_ctl_msg wrap the function in a retry loop. In
the worst case, the timeout for snd_usb_ctl_msg is 5 seconds, which when
retried 10 times (for example, if a device is removed) could cause a
probe to hang for ~50 seconds.
Takashi Iwai [Wed, 16 Aug 2017 12:18:37 +0000 (14:18 +0200)]
ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices
C-Media devices (at least some models) mute the playback stream when
volumes are set to the minimum value. But this isn't informed via TLV
and the user-space, typically PulseAudio, gets confused as if it's
still played in a low volume.
This patch adds the new flag, min_mute, to struct usb_mixer_elem_info
for indicating that the mixer element is with the minimum-mute volume.
This flag is set for known C-Media devices in
snd_usb_mixer_fu_apply_quirk() in turn.
Arvind Yadav [Thu, 17 Aug 2017 10:06:30 +0000 (15:36 +0530)]
ALSA: wavefront: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:29 +0000 (15:36 +0530)]
ALSA: sscape: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:28 +0000 (15:36 +0530)]
ALSA: sb16: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:27 +0000 (15:36 +0530)]
ALSA: opti9xx: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:26 +0000 (15:36 +0530)]
ALSA: msnd: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:25 +0000 (15:36 +0530)]
ALSA: gus: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:24 +0000 (15:36 +0530)]
ALSA: es1688: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:23 +0000 (15:36 +0530)]
ALSA: cs4236: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:22 +0000 (15:36 +0530)]
ALSA: cmi8330: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:21 +0000 (15:36 +0530)]
ALSA: azt2320: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:20 +0000 (15:36 +0530)]
ALSA: als100: constify pnp_card_device_id
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:18 +0000 (15:36 +0530)]
ALSA: opl3sa2: constify pnp_device_id and pnp_card_device_id
*_device_id are not supposed to change at runtime. All functions
working with *_device_id provided by <linux/pnp.h> work with
const *_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:17 +0000 (15:36 +0530)]
ALSA: es18xx: constify pnp_device_id and pnp_card_device_id
*_device_id are not supposed to change at runtime. All functions
working with *_device_id provided by <linux/pnp.h> work with
const *_device_id. So mark the non-const structs as const.
Arvind Yadav [Thu, 17 Aug 2017 10:06:16 +0000 (15:36 +0530)]
ALSA: drivers: mpu401: constify pnp_device_id
pnp_device_id are not supposed to change at runtime. All functions
working with pnp_device_id provided by <linux/pnp.h> work with
const pnp_device_id. So mark the non-const structs as const.
These snd_rawmidi_ops structures are only passed as the third
argument of snd_rawmidi_set_ops. This argument is const, so the
snd_rawmidi_ops structures can be const too.
Takashi Iwai [Mon, 14 Aug 2017 12:35:50 +0000 (14:35 +0200)]
ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset
A Senheisser headset requires the typical sample-rate quirk for
avoiding spurious errors from inquiring the current sample rate like:
usb 1-1: 2:1: cannot get freq at ep 0x4
usb 1-1: 3:1: cannot get freq at ep 0x83
The USB ID 1395:740a has to be added to the entries in
snd_usb_get_sample_rate_quirk().
Daniel Mentz [Mon, 14 Aug 2017 21:46:01 +0000 (14:46 -0700)]
ALSA: seq: 2nd attempt at fixing race creating a queue
commit 4842e98f26dd80be3623c4714a244ba52ea096a8 ("ALSA: seq: Fix race at
creating a queue") attempted to fix a race reported by syzkaller. That
fix has been described as follows:
"
When a sequencer queue is created in snd_seq_queue_alloc(),it adds the
new queue element to the public list before referencing it. Thus the
queue might be deleted before the call of snd_seq_queue_use(), and it
results in the use-after-free error, as spotted by syzkaller.
The fix is to reference the queue object at the right time.
"
Even with that fix in place, syzkaller reported a use-after-free error.
It specifically pointed to the last instruction "return q->queue" in
snd_seq_queue_alloc(). The pointer q is being used after kfree() has
been called on it.
It turned out that there is still a small window where a race can
happen. The window opens at
snd_seq_ioctl_create_queue()->snd_seq_queue_alloc()->queue_list_add()
and closes at
snd_seq_ioctl_create_queue()->queueptr()->snd_use_lock_use(). Between
these two calls, a different thread could delete the queue and possibly
re-create a different queue in the same location in queue_list.
This change prevents this situation by calling snd_use_lock_use() from
snd_seq_queue_alloc() prior to calling queue_list_add(). It is then the
caller's responsibility to call snd_use_lock_free(&q->use_lock).
Fixes: 4842e98f26dd ("ALSA: seq: Fix race at creating a queue") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Arvind Yadav [Fri, 11 Aug 2017 11:58:07 +0000 (17:28 +0530)]
ALSA: wss: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 11 Aug 2017 11:58:06 +0000 (17:28 +0530)]
ALSA: sb8: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 11 Aug 2017 11:58:05 +0000 (17:28 +0530)]
ALSA: sb16: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 11 Aug 2017 11:58:04 +0000 (17:28 +0530)]
ALSA: emu8000: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 11 Aug 2017 11:58:03 +0000 (17:28 +0530)]
ALSA: msnd: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 11 Aug 2017 11:58:02 +0000 (17:28 +0530)]
ALSA: gus: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 11 Aug 2017 11:58:01 +0000 (17:28 +0530)]
ALSA: es18xx: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Arvind Yadav [Fri, 11 Aug 2017 11:58:00 +0000 (17:28 +0530)]
ALSA: es1688: constify snd_pcm_ops structures
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.