s390/qeth: add statistics for consumed buffer elements
Nowadays an skb fragment typically spans over multiple pages. So replace
the obsolete, SG-only 'fragments' counter with one that tracks the
consumed buffer elements. This is what actually matters for performance.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When the MPC initialization code discovers the HW-specific max MTU,
apply the resulting changes straight to the netdevice.
If this is the device's first initialization, also set its MTU
(HiperSockets: the max MTU; else: a layer-specific default value).
Then cap the current MTU by the new max MTU.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allocation of the netdevice is currently delayed until a qeth card first
goes online. This complicates matters in several places, where we need
to cache values instead of applying them straight to the netdevice.
Improve on this by moving the allocation up to where the qeth card
itself is created. This is also one step in direction of eventually
placing the qeth card into netdev_priv().
In all subsequent code, remove the now redundant checks whether
card->dev is valid.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
After the subdriver's remove() routine has completed, the card's layer
mode is undetermined again. Reflect this in the layer2 field.
If qeth_dev_layer2_store() hits an error after remove() was called, the
card _always_ requires a setup(), even if the previous layer mode is
requested again.
But qeth_dev_layer2_store() bails out early if the requested layer mode
still matches the current one. So unless we reset the layer2 field,
re-probing the card back to its previous mode is currently not possible.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
By updating q->used_buffers only _after_ do_QDIO() has completed, there
is a potential race against the buffer's TX completion. In the unlikely
case that the TX completion path wins, qeth_qdio_output_handler() would
decrement the counter before qeth_flush_buffers() even incremented it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: hns3: Remove unused struct member and definition
The struct hclge_desc_cb and hclge_desc_cb are never used in
anywhere. This patch removes them.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The input parameter "dev" of hns3_irq_handle() is indeed
used as a tqp vector, it is misleadin.
The struct member "flag" is used to indicate ring type,
so rename it.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Use BIT() and GENMASK() to convert the bit mask, modify
the inconsistent ones, and remove useless ones.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Using hex for bit offsets is inconsistent with the rest
of the file. Change them to decimal.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes some comment spelling errors, removes
redundant comments, rewrites misleading comments, and
adds some necessary comments.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Apply the standard minor cleanup by returning ret outside
the brackets.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Remove some redundant assignments, because they have
been set to zero when allocate hdev.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add sharing of BPF objects within one ASIC: this allows for reuse of
the same program on multiple ports of a device, and therefore gains
better code store utilization. On top of that, this now also enables
sharing of maps between programs attached to different ports of a
device, from Jakub.
2) Cleanup in libbpf and bpftool's Makefile to reduce unneeded feature
detections and unused variable exports, also from Jakub.
3) First batch of RCU annotation fixes in prog array handling, i.e.
there are several __rcu markers which are not correct as well as
some of the RCU handling, from Roman.
4) Two fixes in BPF sample files related to checking of the prog_cnt
upper limit from sample loader, from Dan.
5) Minor cleanup in sockmap to remove a set but not used variable,
from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are objects in /sys hierarchy (/sys/class/net/) that logically
belong to a namespace/container. Unfortunately all sysfs objects start
their life belonging to global root, and while we could change
ownership manually, keeping tracks of all objects that come and go is
cumbersome. It would be better if kernel created them using correct
uid/gid from the beginning.
This series changes kernfs to allow creating object's with arbitrary
uid/gid, adds get_ownership() callback to ktype structure so subsystems
could supply their own logic (likely tied to namespace support) for
determining ownership of kobjects, and adjusts sysfs code to make use
of this information. Lastly net-sysfs is adjusted to make sure that
objects in net namespace are owned by the root user from the owning
user namespace.
Note that we do not adjust ownership of objects moved into a new
namespace (as when moving a network device into a container) as
userspace can easily do it.
I'm reviving this patch set because we would like this feature for
system containers. One specific use case that we have is that libvirt is
unable to configure its bridge device inside of a system container due
to the bridge files in /sys/class/net/ being owned by init root instead
of container root. The last two patches in this set are patches that
I've added to Dmitry's original set to allow such configuration of the
bridge device.
Eric had previously provided feedback that he didn't favor these changes
affecting all layers of the stack and that most of the changes could
remain local to drivers/base/core.c. That feedback is certainly sensible
but I wanted to send out v2 of the patch set without making that large
of a change since quite a bit of time has passed and the bridge changes
in the last patch of this set shows that not all of the changes will be
local to drivers/base/core.c. I'm happy to make the changes if the
original request still stands.
* Changes since v2:
- Added my Co-Developed-by and Signed-off-by tags to all of Dmitry's
patches that I've modified
- Patch 1 received build failure fixes in
arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
- Patch 2 was updated to drop the declaration of sysfs_add_file() from
sysfs.h since the patch removed all other uses of the function
- Patch 5 is a new patch that prevents tx_maxrate from being written
to from inside of a container
+ Maybe I'm being too cautious here but the restriction can always
be loosened up later
- Patches 6 and 7 were updated to make net_ns_get_ownership() always
initialize uid and gid, even when the network namespace is NULL, so
that it isn't a dangerous function to reuse
+ Requested by Christian Brauner
- I've looked at all sysfs attributes affected by this patch set and
feel comfortable about the changes. There are quite a few affected
attributes that don't have any capable()/ns_capable() checks in
their store operations (per_bond_attrs, at91_sysfs_attrs,
sysfs_grcan_attrs, ican3_sysfs_attrs, cdc_ncm_sysfs_attrs,
qmi_wwan_sysfs_attrs) but I think this is acceptable. It means that
container root, rather than specifically CAP_NET_ADMIN inside of the
network namespace that the device belongs to, can write to those
device attributes. It's the same situation that those devices have
today in that init root is able to write to the attributes without
necessarily having CAP_NET_ADMIN. I think that this should probably
be fixed in order to be consistent with what netdev_store() does by
verifying CAP_NET_ADMIN in the network namespace but that it doesn't
need to happen in this patch set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bridge: make sure objects belong to container's owner
When creating various bridge objects in /sys/class/net/... make sure
that they belong to the container's owner instead of global root (if
they belong to a container/namespace).
Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: create reusable function for getting ownership info of sysfs inodes
Make net_ns_get_ownership() reusable by networking code outside of core.
This is useful, for example, to allow bridge related sysfs files to be
owned by container root.
Add a function comment since this is a potentially dangerous function to
use given the way that kobject_get_ownership() works by initializing uid
and gid before calling .get_ownership().
Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net-sysfs: make sure objects belong to container's owner
When creating various objects in /sys/class/net/... make sure that they
belong to container's owner instead of global root (if they belong to a
container/namespace).
Co-Developed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net-sysfs: require net admin in the init ns for setting tx_maxrate
An upcoming change will allow container root to open some /sys/class/net
files for writing. The tx_maxrate attribute can result in changes
to actual hardware devices so err on the side of caution by requiring
CAP_NET_ADMIN in the init namespace in the corresponding attribute store
operation.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
driver core: set up ownership of class devices in sysfs
Plumb in get_ownership() callback for devices belonging to a class so that
they can be created with uid/gid different from global root. This will
allow network devices in a container to belong to container's root and not
global root.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
kobject: kset_create_and_add() - fetch ownership info from parent
This change implements get_ownership() for ksets created with
kset_create_and_add() call by fetching ownership data from parent kobject.
This is done mostly for benefit of "queues" attribute of net devices so
that corresponding directory belongs to container's root instead of global
root for network devices in a container.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sysfs, kobject: allow creating kobject belonging to arbitrary users
Normally kobjects and their sysfs representation belong to global root,
however it is not necessarily the case for objects in separate namespaces.
For example, objects in separate network namespace logically belong to the
container's root and not global root.
This change lays groundwork for allowing network namespace objects
ownership to be transferred to container's root user by defining
get_ownership() callback in ktype structure and using it in sysfs code to
retrieve desired uid/gid when creating sysfs objects for given kobject.
Co-Developed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
kernfs: allow creating kernfs objects with arbitrary uid/gid
This change allows creating kernfs files and directories with arbitrary
uid/gid instead of always using GLOBAL_ROOT_UID/GID by extending
kernfs_create_dir_ns() and kernfs_create_file_ns() with uid/gid arguments.
The "simple" kernfs_create_file() and kernfs_create_dir() are left alone
and always create objects belonging to the global root.
When creating symlinks ownership (uid/gid) is taken from the target kernfs
object.
Co-Developed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'for-4.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"Fix DM writecache target to allow an optional offset to the start of
the data and metadata area.
This allows userspace tools (e.g. LVM2) to place a header and metadata
at the front of the writecache device for its use"
* tag 'for-4.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm writecache: support optional offset for start of device
Jon Maloy [Wed, 18 Jul 2018 17:50:06 +0000 (19:50 +0200)]
tipc: make link capability update thread safe
The commit referred to below introduced an update of the link
capabilities field that is not safe. Given the recently added
feature to remove idle node and link items after 5 minutes, there
is a small risk that the update will happen at the very moment the
targeted link is being removed. To avoid this we have to perform
the update inside the node item's write lock protection.
Fixes: 9012de508956 ("tipc: add sequence number check for link STATE messages") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It seems that the proper structure to use in this particular
case is *skb_iter* instead of skb.
Addresses-Coverity-ID: 1471906 ("Copy-paste error") Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of 8 obvious fixes.
Three (2 qla2xxx and the cxlflash oopses) are regressions, two from
4.17 and one from the merge window. The hpsa change is user visible,
but it fixes an error users have complained about"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: cxlflash: fix assignment of the backend operations
scsi: qedi: Send driver state to MFW
scsi: qedf: Send the driver state to MFW
scsi: hpsa: correct enclosure sas address
scsi: sd_zbc: Fix variable type and bogus comment
scsi: qla2xxx: Fix NULL pointer dereference for fcport search
scsi: qla2xxx: Fix kernel crash due to late workqueue allocation
scsi: qla2xxx: Fix inconsistent DMA mem alloc/free
Merge tag 'iommu-fixes-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Only one revert, for an an Intel VT-d patch that caused issues with
the i915 GPU driver"
* tag 'iommu-fixes-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
Revert "iommu/vt-d: Clean up pasid quirk for pre-production devices"
Merge tag 'platform-drivers-x86-v4.18-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
"The Dell laptop ACPI video brightness control is now back after fixing
a regression brought by SMM refactoring"
* tag 'platform-drivers-x86-v4.18-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: dell-laptop: Fix backlight detection
Merge tag 'nds32-for-linus-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 updates from Greentime Hu:
"Bug fixes and build ixes for nds32"
* tag 'nds32-for-linus-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: fix build error "relocation truncated to fit: R_NDS32_25_PCREL_RELA" when make allyesconfig
nds32: To simplify the implementation of update_mmu_cache()
nds32: Fix the dts pointer is not passed correctly issue.
nds32: To implement these icache invalidation APIs since nds32 cores don't snoop data cache. This issue is found by Guo Ren. Based on the Documentation/core-api/cachetlb.rst and it says:
nds32: Fix build error caused by configuration flag rename
nds32: define __NDS32_E[BL]__ for sparse
Merge tag 'pm-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a relatively old initialization issue in intel_pstate causing the
pcc-cpufreq driver to be used instead of it on some HP Proliant
systems.
This turned into a functional regression during the 4.17 cycle,
because pcc-cpufreq is a scalability disaster and that was amplified
by the idle loop rework done at that time (Rafael Wysocki).
* tag 'pm-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Register when ACPI PCCH is present
Merge tag 'acpi-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Extend the recently added suspend-to-idle quirk for Thinkpad X1 Carbon
6th to other systems from that familiy which turned out to need it too
(Robin Johnson)"
* tag 'acpi-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems
The commit ab96746aaa34 ("iommu/vt-d: Clean up pasid quirk for
pre-production devices") triggers ECS mode on some platforms
which have broken ECS support. As the result, graphic device
will be inoperable on boot.
qede: Add driver callbacks for eeprom module query.
This patch implements the ethtool callbacks for querying sfp/eeprom module.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds qed APIs for reading the PHY module.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Tue, 17 Jul 2018 16:27:18 +0000 (19:27 +0300)]
net/sched: cls_flower: Support matching on ip tos and ttl for tunnels
Allow users to set rules matching on ipv4 tos and ttl or
ipv6 traffic-class and hoplimit of tunnel headers.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Tue, 17 Jul 2018 16:27:17 +0000 (19:27 +0300)]
flow_dissector: Dissect tos and ttl from the tunnel info
Add dissection of the tos and ttl from the ip tunnel headers
fields in case a match is needed on them.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Tue, 17 Jul 2018 16:27:16 +0000 (19:27 +0300)]
net/sched: tunnel_key: Allow to set tos and ttl for tc based ip tunnels
Allow user-space to provide tos and ttl to be set for the tunnel headers.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'drm-fixes-2018-07-20' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Just two sets of driver fixes this week to follow up on the set from
earlier in the week and hopefully get me realigned schedule wise.
amdgpu:
- ACP fix for boards with multiple I2S instances
- DP fix for CZ, vega
- hybrid laptop fixes
- Resume regression fix
nouveau:
- large memory systems and Pascal fix
- MST race fixes
- runtime PM fix"
* tag 'drm-fixes-2018-07-20' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/fb/gp100-: disable address remapper
drm/amd/amdgpu: creating two I2S instances for stoney/cz (v2)
drm/amdgpu: add another ATPX quirk for TOPAZ
drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
drm/amdgpu: Make sure IB tests flushed after IP resume
drm/nouveau: Set DRIVER_ATOMIC cap earlier to fix debugfs
drm/nouveau: Remove bogus crtc check in pmops_runtime_idle
drm/nouveau/drm/nouveau: Fix runtime PM leak in nv50_disp_atomic_commit()
drm/nouveau: Avoid looping through fake MST connectors
drm/nouveau: Use drm_connector_list_iter_* for iterating connectors
drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()
drm/nouveau/kms/nv50-: ensure window updates are submitted when flushing mst disables
Dave Airlie [Fri, 20 Jul 2018 00:23:37 +0000 (10:23 +1000)]
Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 4.18. The ACP patch is a bit bigger than I would like
at this point, but it should have gone in long ago, it just fell
through the cracks. The others are pretty small and straight-forward.
- ACP fix for boards with 2 I2S instances
- DP fix for CZ, vega
- Fix for a hybrid graphics laptop
- Fix a resume regression
Merge tag 'pci-v4.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix crashes that happen when PHY drivers are left disabled in the V3
Semiconductor, MediaTek, Faraday, Aardvark, DesignWare, Versatile,
and X-Gene host controller drivers (Sergei Shtylyov)
- Fix a NULL pointer dereference in the endpoint library configfs
support (Kishon Vijay Abraham I)
- Fix a race condition in Hyper-V IRQ handling (Dexuan Cui)
* tag 'pci-v4.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: v3-semi: Fix I/O space page leak
PCI: mediatek: Fix I/O space page leak
PCI: faraday: Fix I/O space page leak
PCI: aardvark: Fix I/O space page leak
PCI: designware: Fix I/O space page leak
PCI: versatile: Fix I/O space page leak
PCI: xgene: Fix I/O space page leak
PCI: OF: Fix I/O space page leak
PCI: endpoint: Fix NULL pointer dereference error when CONFIGFS is disabled
PCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg()
This manifsted as strace segfaulting on HSDK because gcc was targetting
the accumulator registers as GPRs, which kernek was not saving/restoring
by default.
Merge tag 'sound-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A rawmidi race fix and three trivial HD-audio quirks"
* tag 'sound-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Yet another Clevo P950 quirk entry
ALSA: rawmidi: Change resized buffers atomically
ALSA: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk
ALSA: hda: add mute led support for HP ProBook 455 G5
Robin H. Johnson [Fri, 13 Jul 2018 20:50:47 +0000 (20:50 +0000)]
ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems
The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems
beyond matched only a single DMI model (20KGS3JF01), that didn't cover
my laptop (20KH002JUS). Change to match based on DMI product family to
cover all X1 6th gen systems.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ben Skeggs [Wed, 18 Jul 2018 06:10:58 +0000 (16:10 +1000)]
drm/nouveau/fb/gp100-: disable address remapper
This was causing problems on a system with a large amount of RAM, where
display push buffers were being fetched incorrectly when placed in high
system memory addresses.
While this commit will resolve the issue on that particular system, the
issue will be avoided completely with another patch to more fully solve
problems with display and large amounts of system memory on Pascal.
It's still probably a good idea to disable this to prevent weird issues
in the future.
====================
docs: Convert alias and bridge to rst
Here is my first attempt at working on converting docs in
Documentation/networking to rst format. I've picked a couple of trivial
ones to start with. If there is anything extra I can do to make your
life easier during documentation conversion please say. (Also if there
is some reason that it would be preferable to _not_ embark on this task
please say :)
This set does not make any changes to the converted files apart from
formatting.
v2:
- remove incorrect patch from set (changing 'Indices' indentation)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Wed, 18 Jul 2018 01:27:45 +0000 (18:27 -0700)]
tcp: identify cryptic messages as TCP seq # bugs
Attempt to make cryptic TCP seq number error messages clearer by
(1) identifying the source of the message as "TCP", (2) identifying the
errors as "seq # bug", and (3) grouping the field identifiers and values
by separating them with commas.
Suggested-by: 積丹尼 Dan Jacobson <jidanni@jidanni.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It seems that a *break* is missing in order to avoid falling through
to the default case. Otherwise, checking *chan* makes no sense.
Fixes: 72df7a7244c0 ("ptp: Allow reassigning calibration pin function") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 17 Jul 2018 21:32:24 +0000 (14:32 -0700)]
pktgen: convert safe uses of strncpy() to strcpy() to avoid string truncation warning
GCC 8 complains:
net/core/pktgen.c: In function ‘pktgen_if_write’:
net/core/pktgen.c:1419:4: warning: ‘strncpy’ output may be truncated copying between 0 and 31 bytes from a string of length 127 [-Wstringop-truncation]
strncpy(pkt_dev->src_max, buf, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/pktgen.c:1399:4: warning: ‘strncpy’ output may be truncated copying between 0 and 31 bytes from a string of length 127 [-Wstringop-truncation]
strncpy(pkt_dev->src_min, buf, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/pktgen.c:1290:4: warning: ‘strncpy’ output may be truncated copying between 0 and 31 bytes from a string of length 127 [-Wstringop-truncation]
strncpy(pkt_dev->dst_max, buf, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/pktgen.c:1268:4: warning: ‘strncpy’ output may be truncated copying between 0 and 31 bytes from a string of length 127 [-Wstringop-truncation]
strncpy(pkt_dev->dst_min, buf, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
There is no bug here, but the code is not perfect either. It copies
sizeof(pkt_dev->/member/) - 1 from user space into buf, and then does
a strcmp(pkt_dev->/member/, buf) hence assuming buf will be null-terminated
and shorter than pkt_dev->/member/ (pkt_dev->/member/ is never
explicitly null-terminated, and strncpy() doesn't have to null-terminate
so the assumption must be on buf). The use of strncpy() without explicit
null-termination looks suspicious. Convert to use straight strcpy().
strncpy() would also null-pad the output, but that's clearly unnecessary
since the author calls memset(pkt_dev->/member/, 0, sizeof(..)); prior
to strncpy(), anyway.
While at it format the code for "dst_min", "dst_max", "src_min" and
"src_max" in the same way by removing extra new lines in one case.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: Fix napi reschedule while receive completion is busy
If out ring is full temporarily and receive completion cannot go out,
we may still need to reschedule napi if certain conditions are met.
Otherwise the napi poll might be stopped forever, and cause network
disconnect.
Fixes: 7426b1a51803 ("netvsc: optimize receive completions") Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The Vitaly Bordug's email bounces ("ru.mvista.com: Name or service not
known") and there was no activity (ack, review, sign) since 2009.
Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: cavium: Add fine-granular dependencies on PCI
Add dependencies on PCI where necessary.
Fixes: 7e2bc7fb65 ("net: cavium: Drop dependency of NET_VENDOR_CAVIUM on PCI") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Wahren [Wed, 18 Jul 2018 06:31:44 +0000 (08:31 +0200)]
net: qca_spi: Make sure the QCA7000 reset is triggered
In case the SPI thread is not running, a simple reset of sync
state won't fix the transmit timeout. We also need to wake up the kernel
thread.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: ed7d42e24eff ("net: qca_spi: fix transmit queue timeout handling") Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Wahren [Wed, 18 Jul 2018 06:31:43 +0000 (08:31 +0200)]
net: qca_spi: Avoid packet drop during initial sync
As long as the synchronization with the QCA7000 isn't finished, we
cannot accept packets from the upper layers. So let the SPI thread
enable the TX queue after sync and avoid unwanted packet drop.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 17 Jul 2018 16:12:39 +0000 (17:12 +0100)]
ipv6: fix useless rol32 call on hash
The rol32 call is currently rotating hash but the rol'd value is
being discarded. I believe the current code is incorrect and hash
should be assigned the rotated value returned from rol32.
Thanks to David Lebrun for spotting this.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 17 Jul 2018 15:52:54 +0000 (16:52 +0100)]
ipv6: sr: fix useless rol32 call on hash
The rol32 call is currently rotating hash but the rol'd value is
being discarded. I believe the current code is incorrect and hash
should be assigned the rotated value returned from rol32.
Detected by CoverityScan, CID#1468411 ("Useless call")
Fixes: b5facfdba14c ("ipv6: sr: Compute flowlabel for outer IPv6 header of seg6 encap mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: dlebrun@google.com Signed-off-by: David S. Miller <davem@davemloft.net>
We avoid 2 VLAs by using a pre-allocated field in dsa_switch. We also
try to avoid dynamic allocation whenever possible (when using fewer than
bits-per-long ports, which is the common case).
David S. Miller [Wed, 18 Jul 2018 22:05:39 +0000 (15:05 -0700)]
Merge branch 'PTP-support-for-mv88e6165-family'
Andrew Lunn says:
====================
PTP support for mv88e6165 family
The mv88e6165 family of switches supports PTP. It is however not fully
compatible with the current PTP support in the mv88e6xxx driver. This
patchset adds a level of abstraction to the PTP code, and then adds
the code needed to support the mv88e6165 family.
v2: Correctly cluster local variables in mv88e6xxx_ptp_setup()
Added Acked-by: Richard Cochran <richardcochran@gmail.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 18 Jul 2018 20:38:27 +0000 (22:38 +0200)]
net: dsa: mv88e6xxx: Longer timeout for PTP TX timestamp
For slow processors using bit-banging MDIO, 20ms can be too short a
timeout when waiting for the transmit timestamp to become
available. Double it to 40ms.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 18 Jul 2018 20:38:26 +0000 (22:38 +0200)]
net: dsa: mv88e6xxx: Set PTP Ethertype
For the 6352 and newer switches, the PTP Ethertype defaults to
ETH_P_1588. Hence it was not explicitly set. The 6165 however defaults
to 0. So explicitly set the EtherType.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 18 Jul 2018 20:38:25 +0000 (22:38 +0200)]
net: dsa: mv88e6xxx: Add hwtimestamp support for the 6165
The 6165 family supports a more restricted version of hardware time
stamps. Only L2 PTP is supported. All ports have to use the same
EtherType, and transport spec configuration. PTP can only be
enabled/disabled globally, not per port.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 18 Jul 2018 20:38:23 +0000 (22:38 +0200)]
net: dsa: mv88e6xxx: Abstract HW timestamp setup
The 6165 family does not have per port PTP control registers. Also, it
places the timestamp data in different registers. Abstract the current
implementation of 6352 compatible PTP devices so that 6165 can be
added.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 18 Jul 2018 20:38:22 +0000 (22:38 +0200)]
net: dsa: mv88e6xxx: Add mv88e6165 PTP support
The mv88e6165 family has its global clock in the PTP global
registers. It does not support any form of PTP events. Add a function
to read the clock, fill in an ops structure, and register it with the
two members of the family.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The MV88E6165 PTP registers are all in AVB bank F, unlike newer
generations which spread them over AVB bank E and F. Implement AVB ops
for the MV88E6165 which hides this difference.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 18 Jul 2018 20:38:20 +0000 (22:38 +0200)]
net: dsa: mv88e6xxx: Abstract PTP operations
The mv88e6165 family supports PTP, but its registers use a different
layout to the currently supported devices. Abstract accessing the PTP
registers into a set of ops, so making space for a second
implementation.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The V3 Semiconductor PCI driver has the same issue.
Replace devm_pci_remap_iospace() with its devm_ managed version to fix
the bug.
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The MediaTek PCIe driver has the same issue.
Replace devm_pci_remap_iospace() with its devm_ managed counterpart
to fix the bug.
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The Faraday PCI driver has the same issue. Replace pci_remap_iospace()
with its devm_ managed version to fix the bug.
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The Aardvark PCI controller driver has the same issue.
Replace pci_remap_iospace() with its devm_ managed version to fix the bug.
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The DesignWare PCIe controller driver has the same issue.
Replace devm_pci_remap_iospace() with a devm_ managed version to fix the
bug.
Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jingoo Han <jingoohan1@gmail.com>
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The Versatile PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version to fix the bug.
Fixes: b7e78170efd4 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The X-Gene PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version so that the
pages get unmapped automagically on any probe failure.
Fixes: 5f6b6ccdbe1c ("PCI: xgene: Add APM X-Gene PCIe driver") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
David S. Miller [Wed, 18 Jul 2018 20:53:48 +0000 (13:53 -0700)]
Merge branch 'bcm-OF-deps'
Florian Fainelli says:
====================
net: Drop OF dependency for some Broadcom drivers
This patch series drops the CONFIG_OF dependency that some Broadcom drivers
had, this is no longer necessary and goes against allowing build testing
on more platforms.
Let me know if kbuild or your own builds somehow fail.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>