Trond Myklebust [Wed, 22 Feb 2017 23:35:32 +0000 (18:35 -0500)]
nfsd: fix configuration of supported minor versions
When the user turns off all minor versions of NFSv4, that should be
equivalent to turning off NFSv4 support, so a mount attempt using NFSv4
should get RPC_PROG_MISMATCH, not NFSERR_MINOR_VERS_MISMATCH.
Allow the user to use either '4.0' or '4' to enable or disable minor
version 0. Other minor versions are still enabled or disabled using the
'4.x' format.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Jeff Layton [Fri, 24 Feb 2017 18:25:24 +0000 (13:25 -0500)]
nfs/nfsd/sunrpc: enforce transport requirements for NFSv4
NFSv4 requires a transport "that is specified to avoid network
congestion" (RFC 7530, section 3.1, paragraph 2). In practical terms,
that means that you should not run NFSv4 over UDP. The server has never
enforced that requirement, however.
This patchset fixes this by adding a new flag to the svc_version that
states that it has these transport requirements. With that, we can check
that the transport has XPT_CONG_CTRL set before processing an RPC. If it
doesn't we reject it with RPC_PROG_MISMATCH.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Jeff Layton [Fri, 24 Feb 2017 18:25:23 +0000 (13:25 -0500)]
sunrpc: flag transports as having congestion control
NFSv4 requires a transport protocol with congestion control in most
cases.
On an IP network, that means that NFSv4 over UDP should be forbidden.
The situation with RDMA is a bit more nuanced, but most RDMA transports
are suitable for this. For now, we assume that all RDMA transports are
suitable, but we may need to revise that at some point.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Both the NFS protocols and the Linux VFS use a setattr operation with a
bitmap of attributes to set to set various file attributes including the
file size and the uid/gid.
The Linux syscalls never mix size updates with unrelated updates like
the uid/gid, and some file systems like XFS and GFS2 rely on the fact
that truncates don't update random other attributes, and many other file
systems handle the case but do not update the other attributes in the
same transaction. NFSD on the other hand passes the attributes it gets
on the wire more or less directly through to the VFS, leading to updates
the file systems don't expect. XFS at least has an assert on the
allowed attributes, which caught an unusual NFS client setting the size
and group at the same time.
To handle this issue properly this splits the notify_change call in
nfsd_setattr into two separate ones.
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Tested-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Kinglong Mee [Fri, 3 Feb 2017 14:36:00 +0000 (22:36 +0800)]
NFSD: Get response size before operation for all RPCs
NFSD usess PAGE_SIZE as the reply size estimate for RPCs which don't
support op_rsize_bop(), A PAGE_SIZE (4096) is larger than many real
response sizes, eg, access (op_encode_hdr_size + 2), seek
(op_encode_hdr_size + 3).
This patch just adds op_rsize_bop() for all RPCs getting response size.
An overestimate is generally safe but the tighter estimates are probably
better.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Kinglong Mee [Sun, 5 Feb 2017 01:57:37 +0000 (09:57 +0800)]
nfsd/callback: skip the callback tag
The callback tag is NULL, and hdr->nops is unused too right now, but.
But if we were to ever test with a nonzero callback tag, nops will get a
bad value.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch checks the principal and returns nfserr_inval directly. It
could check after decoding in nfs4xdr.c, but it's simpler to do it in
nfsd_map_xxxx.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
J. Bruce Fields [Thu, 9 Feb 2017 19:20:42 +0000 (14:20 -0500)]
nfsd: Revert "nfsd: special case truncates some more"
This patch incorrectly attempted nested mnt_want_write, and incorrectly
disabled nfsd's owner override for truncate. We'll fix those problems
and make another attempt soon, for the moment I think the safest is to
revert.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Kinglong Mee [Wed, 8 Feb 2017 01:54:42 +0000 (09:54 +0800)]
SUNRPC/Cache: Always treat the invalid cache as unexpired
When the first time pynfs runs after rpc/nfsd startup, always get the warning,
"Got error: Connection closed"
I found the problem is caused by,
1. A new startup of nfsd, rpc.mountd, etc,
2. A rpc request from client (pynfs test, or normal mounting),
3. An ip_map cache is created but invalid, so upcall to rpc.mountd,
4. rpc.mountd process the ip_map upcall, before write the valid data to nfsd,
do auth_reload(), and check_useipaddr(),
5. For the first time, old_use_ipaddr = -1, it causes rpc.mountd do write_flush that doing cache_clean,
6. The ip_map cache will be treat as expired and clean,
7. When rpc.mountd write the valid data to nfsd, a new ip_map is created
and updated, the cache_check of old ip_map(doing the upcall) will
return -ETIMEDOUT.
8. RPC layer return SVC_CLOSE and close the xprt after commit 4d712ef1db05
"svcauth_gss: Close connection when dropping an incoming message"
NeilBrown suggest in another email,
"If CACHE_VALID is not set, then there is no data in the cache item,
so there is nothing to expire. So it would be nice if cache items that
don't have CACHE_VALID are never treated as expired."
v3, change the order of the two patches
v2, change the checking of CACHE_PENDING to CACHE_VALID
Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Kinglong Mee [Wed, 8 Feb 2017 01:54:33 +0000 (09:54 +0800)]
SUNRPC: Drop all entries from cache_detail when cache_purge()
User always free the cache_detail after sunrpc_destroy_cache_detail(),
so, it must cleanup up entries that left in the cache_detail,
otherwise, NULL reference may be caused when using the left entries.
Also, NeriBrown suggests "write a stand-alone cache_purge()."
v3, move the cache_fresh_unlocked() out of write lock,
v2, a stand-alone cache_purge(), not only for sunrpc_destroy_cache_detail
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Chuck Lever [Tue, 7 Feb 2017 16:59:04 +0000 (11:59 -0500)]
svcrdma: Poll CQs in "workqueue" mode
svcrdma calls svc_xprt_put() in its completion handlers, which
currently run in IRQ context.
However, svc_xprt_put() is meant to be invoked in process context,
not in IRQ context. After the last transport reference is gone, it
directly calls a transport release function that expects to run in
process context.
Change the CQ polling modes to IB_POLL_WORKQUEUE so that svcrdma
invokes svc_xprt_put() only in process context. As an added benefit,
bottom half-disabled spin locking can be eliminated from I/O paths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Chuck Lever [Tue, 7 Feb 2017 16:58:56 +0000 (11:58 -0500)]
svcrdma: Combine list fields in struct svc_rdma_op_ctxt
Clean up: The free list and the dto_q list fields are never used at
the same time. Reduce the size of struct svc_rdma_op_ctxt by
combining these fields.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Chuck Lever [Tue, 7 Feb 2017 16:58:48 +0000 (11:58 -0500)]
svcrdma: Remove unused sc_dto_q field
Clean up. Commit be99bb11400c ("svcrdma: Use new CQ API for
RPC-over-RDMA server send CQs") removed code that used the sc_dto_q
field, but neglected to remove sc_dto_q at the same time.
Fixes: be99bb11400c ("svcrdma: Use new CQ API for RPC-over- ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Chuck Lever [Tue, 7 Feb 2017 16:58:32 +0000 (11:58 -0500)]
svcrdma: Clean up RPC-over-RDMA Call header decoder
Replace C structure-based XDR decoding with pointer arithmetic.
Pointer arithmetic is considered more portable.
Rename the "decode" functions. Nothing is decoded here, they
perform only transport header sanity checking. Use existing XDR
naming conventions to help readability.
Straight-line the hot path:
- relocate the dprintk call sites out of line
- remove unnecessary byte-swapping
- reduce count of conditional branches
Deprecate RDMA_MSGP. It's not properly spec'd by RFC5666, and
therefore never used by any V1 client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Chuck Lever [Tue, 7 Feb 2017 16:58:23 +0000 (11:58 -0500)]
svcrdma: Clean up RPC-over-RDMA Reply header encoder
Replace C structure-based XDR decoding with pointer arithmetic.
Pointer arithmetic is considered more portable, and is used
throughout the kernel's existing XDR encoders. The gcc optimizer
generates similar assembler code either way.
Byte-swapping before a memory store on x86 typically results in an
instruction pipeline stall. Avoid byte-swapping when encoding a new
header.
svcrdma currently doesn't alter a connection's credit grant value
after the connection has been accepted, so it is effectively a
constant. Cache the byte-swapped value in a separate field.
Christoph suggested pulling the header encoding logic into the only
function that uses it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Chuck Lever [Tue, 7 Feb 2017 16:58:15 +0000 (11:58 -0500)]
svcrdma: Another sendto chunk list parsing update
Commit 5fdca6531434 ("svcrdma: Renovate sendto chunk list parsing")
missed a spot. svc_rdma_xdr_get_reply_hdr_len() also assumes the
Write list has only one Write chunk. There's no harm in making this
code more general.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NeilBrown [Mon, 30 Jan 2017 06:17:00 +0000 (17:17 +1100)]
NFSDv4: use export cache flushtime for changeid on V4ROOT objects.
If you change the set of filesystems that are exported, then
the contents of various directories in the NFSv4 pseudo-root
is likely to change. However the change-id of those
directories is currently tied to the underlying directory,
so the client may not see the changes in a timely fashion.
This patch changes the change-id number to be derived from the
"flush_time" of the export cache. Whenever any changes are
made to the set of exported filesystems, this flush_time is
updated. The result is that clients see changes to the set
of exported filesystems much more quickly, often immediately.
Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linus Torvalds [Sat, 4 Feb 2017 20:18:01 +0000 (12:18 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Prevent double activation of interrupt lines, which causes problems
on certain interrupt controllers
- Handle the fallout of the above because x86 (ab)uses the activation
function to reconfigure interrupts under the hood.
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Make irq activate operations symmetric
irqdomain: Avoid activating interrupts more than once
Linus Torvalds [Sat, 4 Feb 2017 20:07:54 +0000 (12:07 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fix from Radim Krčmář:
"Fix a regression that prevented migration between hosts with different
XSAVE features even if the missing features were not used by the guest
(for stable)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: do not save guest-unsupported XSAVE state
Linus Torvalds [Sat, 4 Feb 2017 18:44:15 +0000 (10:44 -0800)]
Merge tag 'char-misc-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two bugfixes that resolve some reported issues. One in the
firmware loader, that should fix the much-reported problem of crashes
with it. The other is a hyperv fix for a reported regression.
Both have been in linux-next for a week or so with no reported issues"
* tag 'char-misc-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()
firmware: fix NULL pointer dereference in __fw_load_abort()
Linus Torvalds [Sat, 4 Feb 2017 18:38:09 +0000 (10:38 -0800)]
Merge tag 'staging-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a few small IIO and one staging driver fix for 4.10-rc7. They
fix some reported issues with the drivers.
All of them have been in linux-next for a week or so with no reported
issues"
* tag 'staging-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: greybus: timesync: validate platform state callback
iio: dht11: Use usleep_range instead of msleep for start signal
iio: adc: palmas_gpadc: retrieve a valid iio_dev in suspend/resume
iio: health: max30100: fixed parenthesis around FIFO count check
iio: health: afe4404: retrieve a valid iio_dev in suspend/resume
iio: health: afe4403: retrieve a valid iio_dev in suspend/resume
Linus Torvalds [Sat, 4 Feb 2017 00:18:51 +0000 (16:18 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix this time: a fix for a virtqueue removal bug which only
appears to affect S390, but which results in the queue hanging forever
thus causing the machine to fail shutdown"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: virtio_scsi: Reject commands when virtqueue is broken
Linus Torvalds [Fri, 3 Feb 2017 23:43:30 +0000 (15:43 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost fixes from Michael S. Tsirkin:
"Last minute fixes:
- ARM DMA fix revert
- vhost endian-ness fix
- MAINTAINERS: email address change for Amit"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
MAINTAINERS: update email address for Amit Shah
vhost: fix initialization for vq->is_le
Revert "vring: Force use of DMA API for ARM-based systems with legacy devices"
Linus Torvalds [Fri, 3 Feb 2017 22:50:42 +0000 (14:50 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, fs: check for fatal signals in do_generic_file_read()
fs: break out of iomap_file_buffered_write on fatal signals
base/memory, hotplug: fix a kernel oops in show_valid_zones()
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
jump label: pass kbuild_cflags when checking for asm goto support
shmem: fix sleeping from atomic context
kasan: respect /proc/sys/kernel/traceoff_on_warning
zswap: disable changing params if init fails
Michal Hocko [Fri, 3 Feb 2017 21:13:29 +0000 (13:13 -0800)]
mm, fs: check for fatal signals in do_generic_file_read()
do_generic_file_read() can be told to perform a large request from
userspace. If the system is under OOM and the reading task is the OOM
victim then it has an access to memory reserves and finishing the full
request can lead to the full memory depletion which is dangerous. Make
sure we rather go with a short read and allow the killed task to
terminate.
Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 3 Feb 2017 21:13:26 +0000 (13:13 -0800)]
fs: break out of iomap_file_buffered_write on fatal signals
Tetsuo has noticed that an OOM stress test which performs large write
requests can cause the full memory reserves depletion. He has tracked
this down to the following path
the oom victim has access to all memory reserves to make a forward
progress to exit easier. But iomap_file_buffered_write and other
callers of iomap_apply loop to complete the full request. We need to
check for fatal signals and back off with a short write instead.
As the iomap_apply delegates all the work down to the actor we have to
hook into those. All callers that work with the page cache are calling
iomap_write_begin so we will check for signals there. dax_iomap_actor
has to handle the situation explicitly because it copies data to the
userspace directly. Other callers like iomap_page_mkwrite work on a
single page or iomap_fiemap_actor do not allocate memory based on the
given len.
Fixes: 68a9f5e7007c ("xfs: implement iomap based buffered write path") Link: http://lkml.kernel.org/r/20170201092706.9966-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toshi Kani [Fri, 3 Feb 2017 21:13:23 +0000 (13:13 -0800)]
base/memory, hotplug: fix a kernel oops in show_valid_zones()
Reading a sysfs "memoryN/valid_zones" file leads to the following oops
when the first page of a range is not backed by struct page.
show_valid_zones() assumes that 'start_pfn' is always valid for
page_zone().
BUG: unable to handle kernel paging request at ffffea017a000000
IP: show_valid_zones+0x6f/0x160
This issue may happen on x86-64 systems with 64GiB or more memory since
their memory block size is bumped up to 2GiB. [1] An example of such
systems is desribed below. 0x3240000000 is only aligned by 1GiB and
this memory block starts from 0x3200000000, which is not backed by
struct page.
Since test_pages_in_a_zone() already checks holes, fix this issue by
extending this function to return 'valid_start' and 'valid_end' for a
given range. show_valid_zones() then proceeds with the valid range.
[1] 'Commit bdee237c0343 ("x86: mm: Use 2GB memory block size on
large-memory x86-64 systems")'
Link: http://lkml.kernel.org/r/20170127222149.30893-3-toshi.kani@hpe.com Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> [4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toshi Kani [Fri, 3 Feb 2017 21:13:20 +0000 (13:13 -0800)]
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
Patch series "fix a kernel oops when reading sysfs valid_zones", v2.
A sysfs memory file is created for each 2GiB memory block on x86-64 when
the system has 64GiB or more memory. [1] When the start address of a
memory block is not backed by struct page, i.e. a memory range is not
aligned by 2GiB, reading its 'valid_zones' attribute file leads to a
kernel oops. This issue was observed on multiple x86-64 systems with
more than 64GiB of memory. This patch-set fixes this issue.
Patch 1 first fixes an issue in test_pages_in_a_zone(), which does not
test the start section.
Patch 2 then fixes the kernel oops by extending test_pages_in_a_zone()
to return valid [start, end).
Note for stable kernels: The memory block size change was made by commit bdee237c0343 ("x86: mm: Use 2GB memory block size on large-memory x86-64
systems"), which was accepted to 3.9. However, this patch-set depends
on (and fixes) the change to test_pages_in_a_zone() made by commit 5f0f2887f4de ("mm/memory_hotplug.c: check for missing sections in
test_pages_in_a_zone()"), which was accepted to 4.4.
So, I recommend that we backport it up to 4.4.
[1] 'Commit bdee237c0343 ("x86: mm: Use 2GB memory block size on
large-memory x86-64 systems")'
This patch (of 2):
test_pages_in_a_zone() does not check 'start_pfn' when it is aligned by
section since 'sec_end_pfn' is set equal to 'pfn'. Since this function
is called for testing the range of a sysfs memory file, 'start_pfn' is
always aligned by section.
Fix it by properly setting 'sec_end_pfn' to the next section pfn.
Also make sure that this function returns 1 only when the range belongs
to a zone.
David Lin [Fri, 3 Feb 2017 21:13:18 +0000 (13:13 -0800)]
jump label: pass kbuild_cflags when checking for asm goto support
Some versions of ARM GCC compiler such as Android toolchain throws in a
'-fpic' flag by default. This causes the gcc-goto check script to fail
although some config would have '-fno-pic' flag in the KBUILD_CFLAGS.
This patch passes the KBUILD_CFLAGS to the check script so that the
script does not rely on the default config from different compilers.
Link: http://lkml.kernel.org/r/20170120234329.78868-1-dtwlin@google.com Signed-off-by: David Lin <dtwlin@google.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Michal Marek <mmarek@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The iput() from atomic context was a bad idea: if after igrab() somebody
else calls iput() and we left with the last inode reference, our iput()
would lead to inode eviction and therefore sleeping.
This patch should fix the situation.
Link: http://lkml.kernel.org/r/20170131093141.GA15899@node.shutemov.name Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Streetman [Fri, 3 Feb 2017 21:13:09 +0000 (13:13 -0800)]
zswap: disable changing params if init fails
Add zswap_init_failed bool that prevents changing any of the module
params, if init_zswap() fails, and set zswap_enabled to false. Change
'enabled' param to a callback, and check zswap_init_failed before
allowing any change to 'enabled', 'zpool', or 'compressor' params.
Any driver that is built-in to the kernel will not be unloaded if its
init function returns error, and its module params remain accessible for
users to change via sysfs. Since zswap uses param callbacks, which
assume that zswap has been initialized, changing the zswap params after
a failed initialization will result in WARNING due to the param
callbacks expecting a pool to already exist. This prevents that by
immediately exiting any of the param callbacks if initialization failed.
This was reported here:
https://marc.info/?l=linux-mm&m=147004228125528&w=4
And fixes this WARNING:
[ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
The warning is just noise, and not serious. However, when init fails,
zswap frees all its percpu dstmem pages and its kmem cache. The kmem
cache might be serious, if kmem_cache_alloc(NULL, gfp) has problems; but
the percpu dstmem pages are definitely a problem, as they're used as
temporary buffer for compressed pages before copying into place in the
zpool.
If the user does get zswap enabled after an init failure, then zswap
will likely Oops on the first page it tries to compress (or worse, start
corrupting memory).
Fixes: 90b0fc26d5db ("zswap: change zpool/compressor at runtime") Link: http://lkml.kernel.org/r/20170124200259.16191-2-ddstreet@ieee.org Signed-off-by: Dan Streetman <dan.streetman@canonical.com> Reported-by: Marcin Miroslaw <marcin@mejor.pl> Cc: Seth Jennings <sjenning@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 3 Feb 2017 21:46:38 +0000 (13:46 -0800)]
Merge tag 'regulator-fix-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Three changes here: two run of the mill driver specific fixes and a
change from Mark Rutland which reverts some new device specific ACPI
binding code which was added during the merge window as there are
concerns about this sending the wrong signal about usage of regulators
in ACPI systems"
* tag 'regulator-fix-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: Revert support for ACPI interface
regulator: axp20x: AXP806: Fix dcdcb being set instead of dcdce
regulator: twl6030: fix range comparison, allowing vsel = 59
Halil Pasic [Mon, 30 Jan 2017 10:09:36 +0000 (11:09 +0100)]
vhost: fix initialization for vq->is_le
Currently, under certain circumstances vhost_init_is_le does just a part
of the initialization job, and depends on vhost_reset_is_le being called
too. For this reason vhost_vq_init_access used to call vhost_reset_is_le
when vq->private_data is NULL. This is not only counter intuitive, but
also real a problem because it breaks vhost_net. The bug was introduced to
vhost_net with commit 2751c9882b94 ("vhost: cross-endian support for
legacy devices"). The symptom is corruption of the vq's used.idx field
(virtio) after VHOST_NET_SET_BACKEND was issued as a part of the vhost
shutdown on a vq with pending descriptors.
Let us make sure the outcome of vhost_init_is_le never depend on the state
it is actually supposed to initialize, and fix virtio_net by removing the
reset from vhost_vq_init_access.
With the above, there is no reason for vhost_reset_is_le to do just half
of the job. Let us make vhost_reset_is_le reinitialize is_le.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reported-by: Michael A. Tebolt <miket@us.ibm.com> Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: commit 2751c9882b94 ("vhost: cross-endian support for legacy devices") Cc: <stable@vger.kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Michael A. Tebolt <miket@us.ibm.com>
This has been shown to regress on some ARM systems:
by forcing on DMA API usage for ARM systems, we have inadvertently
kicked open a hornets' nest in terms of cache-coherency. Namely that
unless the virtio device is explicitly described as capable of coherent
DMA by firmware, the DMA APIs on ARM and other DT-based platforms will
assume it is non-coherent. This turns out to cause a big problem for the
likes of QEMU and kvmtool, which generate virtio-mmio devices in their
guest DTs but neglect to add the often-overlooked "dma-coherent"
property; as a result, we end up with the guest making non-cacheable
accesses to the vring, the host doing so cacheably, both talking past
each other and things going horribly wrong.
We are working on a safer work-around.
Fixes: c7070619f340 ("vring: Force use of DMA API for ARM-based systems with legacy devices") Reported-by: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Linus Torvalds [Fri, 3 Feb 2017 19:32:25 +0000 (11:32 -0800)]
Merge tag 'drm-fixes-for-v4.10-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Another fixes pull for v4.10, it's a bit big due to the backport of
the VMA fixes for i915 that should fix the oops on shutdown problems
that you've worked around.
There are also two drm core connector registration fixes, a bunch of
nouveau regression fixes and two AMD fixes"
* tag 'drm-fixes-for-v4.10-rc7' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl
drm/amdgpu/si: fix crash on headless asics
drm/i915: Track pinned vma in intel_plane_state
drm/atomic: Unconditionally call prepare_fb.
drm/atomic: Fix double free in drm_atomic_state_default_clear
drm/nouveau/kms/nv50: request vblank events for commits that send completion events
drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval
drm/nouveau/disp/gt215: Fix HDA ELD handling (thus, HDMI audio) on gt215
drm/nouveau/nouveau/led: prevent compiling the led-code if nouveau=y and leds=m
drm/nouveau/disp/mcp7x: disable dptmds workaround
drm/nouveau: prevent userspace from deleting client object
drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers
drm: Don't race connector registration
drm: prevent double-(un)registration for connectors
Linus Torvalds [Fri, 3 Feb 2017 19:10:06 +0000 (11:10 -0800)]
Merge tag 'powerpc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"The main change is we're reverting the initial stack protector support
we merged this cycle. It turns out to not work on toolchains built
with libc support, and fixing it will be need to wait for another
release.
And the rest are all fairly minor:
- Some pasemi machines were not booting due to a missing error check
in prom_find_boot_cpu()
- In EEH we were checking a pointer rather than the bool it pointed
to
- The clang build was broken by a BUILD_BUG_ON() we added.
- The radix (Power9 only) version of map_kernel_page() was broken if
our memory size was a multiple of 2MB, which it generally isn't
Thanks to: Darren Stevens, Gavin Shan, Reza Arbab"
* tag 'powerpc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Use the correct pointer when setting a 2MB pte
powerpc: Fix build failure with clang due to BUILD_BUG_ON()
powerpc: Revert the initial stack protector support
powerpc/eeh: Fix wrong flag passed to eeh_unfreeze_pe()
powerpc: Add missing error check to prom_find_boot_cpu()
Linus Torvalds [Fri, 3 Feb 2017 18:30:27 +0000 (10:30 -0800)]
Merge branch 'modversions' (modversions fixes for powerpc from Ard)
Merge kcrctab entry fixes from Ard Biesheuvel:
"This is a followup to [0] 'modversions: redefine kcrctab entries as
relative CRC pointers', but since relative CRC pointers do not work in
modules, and are actually only needed by powerpc with
CONFIG_RELOCATABLE=y, I have made it a Kconfig selectable feature
instead.
First it introduces the MODULE_REL_CRCS Kconfig symbol, and adds the
kbuild handling of it, i.e., modpost, genksyms and kallsyms.
Then it switches all architectures to 32-bit CRC entries in kcrctab,
where all architectures except powerpc with CONFIG_RELOCATABLE=y use
absolute ELF symbol references as before"
* emailed patches from Ard Biesheuvel:
module: unify absolute krctab definitions for 32-bit and 64-bit
modversions: treat symbol CRCs as 32 bit quantities
kbuild: modversions: add infrastructure for emitting relative CRCs
Ard Biesheuvel [Thu, 2 Feb 2017 18:05:26 +0000 (18:05 +0000)]
log2: make order_base_2() behave correctly on const input value zero
The function order_base_2() is defined (according to the comment block)
as returning zero on input zero, but subsequently passes the input into
roundup_pow_of_two(), which is explicitly undefined for input zero.
This has gone unnoticed until now, but optimization passes in GCC 7 may
produce constant folded function instances where a constant value of
zero is passed into order_base_2(), resulting in link errors against the
deliberately undefined '____ilog2_NaN'.
So update order_base_2() to adhere to its own documented interface.
and follow-up discussion for more background. The gcc "optimization
pass" is really just broken, but now the GCC trunk problem seems to
have escaped out of just specially built daily images, so we need to
work around it in mainline. - Linus ]
Radim Krčmář [Wed, 1 Feb 2017 13:19:53 +0000 (14:19 +0100)]
KVM: x86: do not save guest-unsupported XSAVE state
Saving unsupported state prevents migration when the new host does not
support a XSAVE feature of the original host, even if the feature is not
exposed to the guest.
We've masked host features with guest-visible features before, with 4344ee981e21 ("KVM: x86: only copy XSAVE state for the supported
features") and dropped it when implementing XSAVES. Do it again.
Fixes: df1daba7d1cb ("KVM: x86: support XSAVES usage in the host") Cc: stable@vger.kernel.org Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Ard Biesheuvel [Fri, 3 Feb 2017 09:54:07 +0000 (09:54 +0000)]
module: unify absolute krctab definitions for 32-bit and 64-bit
The previous patch introduced a separate inline asm version of the
krcrctab declaration template for use with 64-bit architectures, which
cannot refer to ELF symbols using 32-bit quantities.
This declaration should be equivalent to the C one for 32-bit
architectures, but just in case - unify them in a separate patch, which
can simply be dropped if it turns out to break anything.
Ard Biesheuvel [Fri, 3 Feb 2017 09:54:06 +0000 (09:54 +0000)]
modversions: treat symbol CRCs as 32 bit quantities
The modversion symbol CRCs are emitted as ELF symbols, which allows us
to easily populate the kcrctab sections by relying on the linker to
associate each kcrctab slot with the correct value.
This has a couple of downsides:
- Given that the CRCs are treated as memory addresses, we waste 4 bytes
for each CRC on 64 bit architectures,
- On architectures that support runtime relocation, a R_<arch>_RELATIVE
relocation entry is emitted for each CRC value, which identifies it
as a quantity that requires fixing up based on the actual runtime
load offset of the kernel. This results in corrupted CRCs unless we
explicitly undo the fixup (and this is currently being handled in the
core module code)
- Such runtime relocation entries take up 24 bytes of __init space
each, resulting in a x8 overhead in [uncompressed] kernel size for
CRCs.
Switching to explicit 32 bit values on 64 bit architectures fixes most
of these issues, given that 32 bit values are not treated as quantities
that require fixing up based on the actual runtime load offset. Note
that on some ELF64 architectures [such as PPC64], these 32-bit values
are still emitted as [absolute] runtime relocatable quantities, even if
the value resolves to a build time constant. Since relative relocations
are always resolved at build time, this patch enables MODULE_REL_CRCS on
powerpc when CONFIG_RELOCATABLE=y, which turns the absolute CRC
references into relative references into .rodata where the actual CRC
value is stored.
So redefine all CRC fields and variables as u32, and redefine the
__CRC_SYMBOL() macro for 64 bit builds to emit the CRC reference using
inline assembler (which is necessary since 64-bit C code cannot use
32-bit types to hold memory addresses, even if they are ultimately
resolved using values that do not exceed 0xffffffff). To avoid
potential problems with legacy 32-bit architectures using legacy
toolchains, the equivalent C definition of the kcrctab entry is retained
for 32-bit architectures.
Note that this mostly reverts commit d4703aefdbc8 ("module: handle ppc64
relocating kcrctabs when CONFIG_RELOCATABLE=y")
Ard Biesheuvel [Fri, 3 Feb 2017 09:54:05 +0000 (09:54 +0000)]
kbuild: modversions: add infrastructure for emitting relative CRCs
This add the kbuild infrastructure that will allow architectures to emit
vmlinux symbol CRCs as 32-bit offsets to another location in the kernel
where the actual value is stored. This works around problems with CRCs
being mistaken for relocatable symbols on kernels that self relocate at
runtime (i.e., powerpc with CONFIG_RELOCATABLE=y)
For the kbuild side of things, this comes down to the following:
- introducing a Kconfig symbol MODULE_REL_CRCS
- adding a -R switch to genksyms to instruct it to emit the CRC symbols
as references into the .rodata section
- making modpost distinguish such references from absolute CRC symbols
by the section index (SHN_ABS)
- making kallsyms disregard non-absolute symbols with a __crc_ prefix
Dave Airlie [Thu, 2 Feb 2017 23:09:36 +0000 (09:09 +1000)]
Merge tag 'topic/vma-fix-for-4.10-2017-02-02' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
here's Maarten's backport of the vma fixes for v4.10.
* tag 'topic/vma-fix-for-4.10-2017-02-02' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Track pinned vma in intel_plane_state
drm/atomic: Unconditionally call prepare_fb.
Linus Torvalds [Thu, 2 Feb 2017 22:08:58 +0000 (14:08 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- two microcode loader fixes
- two FPU xstate handling fixes
- an MCE timer handling related crash fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make timer handling more robust
x86/microcode: Do not access the initrd after it has been freed
x86/fpu/xstate: Fix xcomp_bv in XSAVES header
x86/fpu: Set the xcomp_bv when we fake up a XSAVES area
x86/microcode/intel: Drop stashed AP patch pointer optimization
Linus Torvalds [Thu, 2 Feb 2017 21:30:19 +0000 (13:30 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Five kernel fixes:
- an mmap tracing ABI fix for certain mappings
- a use-after-free fix, found via KASAN
- three CPU hotplug related x86 PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Make package handling more robust
perf/x86/intel/uncore: Clean up hotplug conversion fallout
perf/x86/intel/rapl: Make package handling more robust
perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory
perf/core: Fix use-after-free bug
Linus Torvalds [Thu, 2 Feb 2017 21:20:23 +0000 (13:20 -0800)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two EFI boot fixes, one for arm64 and one for x86 systems with certain
firmware versions"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/fdt: Avoid FDT manipulation after ExitBootServices()
x86/efi: Always map the first physical page into the EFI pagetables
Linus Torvalds [Thu, 2 Feb 2017 20:49:58 +0000 (12:49 -0800)]
Merge tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Three more miscellaneous nfsd bugfixes"
* tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linux:
svcrpc: fix oops in absence of krb5 module
nfsd: special case truncates some more
NFSD: Fix a null reference case in find_or_create_lock_stateid()
Linus Torvalds [Thu, 2 Feb 2017 20:34:27 +0000 (12:34 -0800)]
Merge tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Configure ASPM on the link from a PCI-to-PCIe bridge (avoids a NULL
pointer dereference on topologies including these bridges)"
* tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies
Michel Dänzer [Mon, 30 Jan 2017 03:06:35 +0000 (12:06 +0900)]
drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl
vram_size is supposed to be the total amount of VRAM that can be used by
userspace, which corresponds to the TTM VRAM manager size (which is
normally the full amount of VRAM, but can be just the visible VRAM when
DMA can't be used for BO migration for some reason).
The above was incorrectly used for vram_visible before, resulting in
generally too large values being reported.
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arnd Bergmann [Wed, 1 Feb 2017 16:57:56 +0000 (17:57 +0100)]
tracing/kprobes: Fix __init annotation
clang complains about "__init" being attached to a struct name:
kernel/trace/trace_kprobe.c:1375:15: error: '__section__' attribute only applies to functions and global variables
The intention must have been to mark the function as __init instead of
the type, so move the attribute there.
Link: http://lkml.kernel.org/r/20170201165826.2625888-1-arnd@arndb.de Fixes: f18f97ac43d7 ("tracing/kprobes: Add a helper method to return number of probe hits") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Ard Biesheuvel [Wed, 1 Feb 2017 17:45:02 +0000 (17:45 +0000)]
efi/fdt: Avoid FDT manipulation after ExitBootServices()
Some AArch64 UEFI implementations disable the MMU in ExitBootServices(),
after which unaligned accesses to RAM are no longer supported.
Commit:
abfb7b686a3e ("efi/libstub/arm*: Pass latest memory map to the kernel")
fixed an issue in the memory map handling of the stub FDT code, but
inadvertently created an issue with such firmware, by moving some
of the FDT manipulation to after the invocation of ExitBootServices().
Given that the stub's libfdt implementation uses the ordinary, accelerated
string functions, which rely on hardware handling of unaligned accesses,
manipulating the FDT with the MMU off may result in alignment faults.
So fix the situation by moving the update_fdt_memmap() call into the
callback function invoked by efi_exit_boot_services() right before it
calls the ExitBootServices() UEFI service (which is arguably a better
place for it anyway)
Note that disabling the MMU in ExitBootServices() is not compliant with
the UEFI spec, and carries great risk due to the fact that switching from
cached to uncached memory accesses halfway through compiler generated code
(i.e., involving a stack) can never be done in a way that is architecturally
safe.
1) Fix handling of interrupt status in stmmac driver. Just because we
have masked the event from generating interrupts, doesn't mean the
bit won't still be set in the interrupt status register. From Alexey
Brodkin.
2) Fix DMA API debugging splats in gianfar driver, from Arseny Solokha.
3) Fix off-by-one error in __ip6_append_data(), from Vlad Yasevich.
4) cls_flow does not match on icmpv6 codes properly, from Simon Horman.
5) Initial MAC address can be set incorrectly in some scenerios, from
Ivan Vecera.
6) Packet header pointer arithmetic fix in ip6_tnl_parse_tlv_end_lim(),
from Dan Carpenter.
7) Fix divide by zero in __tcp_select_window(), from Eric Dumazet.
8) Fix crash in iwlwifi when unregistering thermal zone, from Jens
Axboe.
9) Check for DMA mapping errors in starfire driver, from Alexey
Khoroshilov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits)
tcp: fix 0 divide in __tcp_select_window()
ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()
net: fix ndo_features_check/ndo_fix_features comment ordering
net/sched: matchall: Fix configuration race
be2net: fix initial MAC setting
ipv6: fix flow labels when the traffic class is non-0
net: thunderx: avoid dereferencing xcv when NULL
net/sched: cls_flower: Correct matching on ICMPv6 code
ipv6: Paritially checksum full MTU frames
net/mlx4_core: Avoid command timeouts during VF driver device shutdown
gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page
net: ethtool: add support for 2500BaseT and 5000BaseT link modes
can: bcm: fix hrtimer/tasklet termination in bcm op removal
net: adaptec: starfire: add checks for dma mapping errors
net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause
can: Fix kernel panic at security_sock_rcv_skb
net: macb: Fix 64 bit addressing support for GEM
stmmac: Discard masked flags in interrupt status register
net/mlx5e: Check ets capability before ets query FW command
net/mlx5e: Fix update of hash function/key via ethtool
...
Linus Torvalds [Wed, 1 Feb 2017 18:30:56 +0000 (10:30 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fscache fixes from Al Viro.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fscache: Fix dead object requeue
fscache: Clear outstanding writes when disabling a cookie
FS-Cache: Initialise stores_lock in netfs cookie
Eric Dumazet [Wed, 1 Feb 2017 16:33:53 +0000 (08:33 -0800)]
tcp: fix 0 divide in __tcp_select_window()
syszkaller fuzzer was able to trigger a divide by zero, when
TCP window scaling is not enabled.
SO_RCVBUF can be used not only to increase sk_rcvbuf, also
to decrease it below current receive buffers utilization.
If mss is negative or 0, just return a zero TCP window.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 1 Feb 2017 08:46:32 +0000 (11:46 +0300)]
ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()
Casting is a high precedence operation but "off" and "i" are in terms of
bytes so we need to have some parenthesis here.
Fixes: fbfa743a9d2a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 1 Feb 2017 17:24:00 +0000 (09:24 -0800)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a bug in CBC/CTR on ARM64 that breaks chaining as well as a
bug in the core API that causes registration failures when a driver
unloads and then reloads an algorithm"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes
crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg
Linus Torvalds [Wed, 1 Feb 2017 17:22:08 +0000 (09:22 -0800)]
Merge tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A couple of fixes showed up late in the cycle so sending them up and
sending early in the week and not on Friday :).
They fix a double lock in pl330 driver and runtime pm fixes for cppi
driver"
* tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: pl330: fix double lock
dmaengine: cppi41: Clean up pointless warnings
dmaengine: cppi41: Fix oops in cppi41_runtime_resume
dmaengine: cppi41: Fix runtime PM timeouts with USB mass storage
Commit cdba756f5803a2 ("net: move ndo_features_check() close to
ndo_start_xmit()") inadvertently moved the doc comment for
.ndo_fix_features instead of .ndo_features_check. Fix the comment
ordering.
Fixes: cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()") Signed-off-by: Dimitris Michailidis <dmichail@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 31 Jan 2017 13:14:29 +0000 (15:14 +0200)]
net/sched: matchall: Fix configuration race
In the current version, the matchall internal state is split into two
structs: cls_matchall_head and cls_matchall_filter. This makes little
sense, as matchall instance supports only one filter, and there is no
situation where one exists and the other does not. In addition, that led
to some races when filter was deleted while packet was processed.
Unify that two structs into one, thus simplifying the process of matchall
creation and deletion. As a result, the new, delete and get callbacks have
a dummy implementation where all the work is done in destroy and change
callbacks, as was done in cls_cgroup.
Fixes: bf3994d2ed31 ("net/sched: introduce Match-all classifier") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
vfio/spapr: Fix missing mutex unlock when creating a window
Commit d9c728949ddc ("vfio/spapr: Postpone default window creation")
added an additional exit to the VFIO_IOMMU_SPAPR_TCE_CREATE case and
made it possible to return from tce_iommu_ioctl() without unlocking
container->lock; this fixes the issue.
Fixes: d9c728949ddc ("vfio/spapr: Postpone default window creation") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Linus Torvalds [Wed, 1 Feb 2017 16:34:13 +0000 (08:34 -0800)]
Merge tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Another week, another set of pin control fixes. The subsystem has seen
high patch-spot activity recently.
The majority of the patches are for Intel, I vaguely think it mostly
concern phones, tablets and maybe chromebooks and even laptops with
this Intel Atom family chips.
Driver fixes only:
- one fix to the Berlin driver making the SD card work fully again.
- one fix to the Allwinner/sunxi bias function: one premature change
needs to be partially reverted.
- the remaining four patches are to Intel embedded SoCs: baytrail
(three patches) and merrifield (one patch): register access
debounce fixes and a missing spinlock"
* tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler
pinctrl: baytrail: Debounce register is one per community
pinctrl: baytrail: Rectify debounce support (part 2)
pinctrl: intel: merrifield: Add missed check in mrfld_config_set()
pinctrl: sunxi: Don't enforce bias disable (for now)
pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES
Ivan Vecera [Tue, 31 Jan 2017 19:01:31 +0000 (20:01 +0100)]
be2net: fix initial MAC setting
Recent commit 34393529163a ("be2net: fix MAC addr setting on privileged
BE3 VFs") allows privileged BE3 VFs to set its MAC address during
initialization. Although the initial MAC for such VFs is already
programmed by parent PF the subsequent setting performed by VF is OK,
but in certain cases (after fresh boot) this command in VF can fail.
The MAC should be initialized only when:
1) no MAC is programmed (always except BE3 VFs during first init)
2) programmed MAC is different from requested (e.g. MAC is set when
interface is down). In this case the initial MAC programmed by PF
needs to be deleted.
The adapter->dev_mac contains MAC address currently programmed in HW so
it should be zeroed when the MAC is deleted from HW and should not be
filled when MAC is set when interface is down in be_mac_addr_set() as
no programming is performed in this case.
Example of failure without the fix (immediately after fresh boot):
# ip link set eth0 up <- eth0 is BE3 PF
be2net 0000:01:00.0 eth0: Link is Up
Chris Wilson [Tue, 31 Jan 2017 09:21:31 +0000 (10:21 +0100)]
drm/i915: Track pinned vma in intel_plane_state
With atomic plane states we are able to track an allocation right from
preparation, during use and through to the final free after being
swapped out for a new plane. We can couple the VMA we pin for the
framebuffer (and its rotation) to this lifetime and avoid all the clumsy
lookups in between.
v2: Remove residual vma on plane cleanup (Chris)
v3: Add a description for the vma destruction in
intel_plane_destroy_state (Maarten)
drm: Don't prepare or cleanup unchanging frame buffers [v3]
The original commit mentions that this prevents waiting in i915 on all
previous rendering during cursor updates, but there are better ways to
fix this.
Thomas Gleixner [Tue, 31 Jan 2017 22:58:40 +0000 (23:58 +0100)]
perf/x86/intel/uncore: Make package handling more robust
The package management code in uncore relies on package mapping being
available before a CPU is started. This changed with:
9d85eb9119f4 ("x86/smpboot: Make logical package management more robust")
because the ACPI/BIOS information turned out to be unreliable, but that
left uncore in broken state. This was not noticed because on a regular boot
all CPUs are online before uncore is initialized.
Move the allocation to the CPU online callback and simplify the hotplug
handling. At this point the package mapping is established and correct.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.377156255@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 31 Jan 2017 22:58:39 +0000 (23:58 +0100)]
perf/x86/intel/uncore: Clean up hotplug conversion fallout
The recent conversion to the hotplug state machine kept two mechanisms from
the original code:
1) The first_init logic which adds the number of online CPUs in a package
to the refcount. That's wrong because the callbacks are executed for
all online CPUs.
Remove it so the refcounting is correct.
2) The on_each_cpu() call to undo box->init() in the error handling
path. That's bogus because when the prepare callback fails no box has
been initialized yet.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Fixes: 1a246b9f58c6 ("perf/x86/intel/uncore: Convert to hotplug state machine") Link: http://lkml.kernel.org/r/20170131230141.298032324@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 31 Jan 2017 22:58:38 +0000 (23:58 +0100)]
perf/x86/intel/rapl: Make package handling more robust
The package management code in RAPL relies on package mapping being
available before a CPU is started. This changed with:
9d85eb9119f4 ("x86/smpboot: Make logical package management more robust")
because the ACPI/BIOS information turned out to be unreliable, but that
left RAPL in broken state. This was not noticed because on a regular boot
all CPUs are online before RAPL is initialized.
A possible fix would be to reintroduce the mess which allocates a package
data structure in CPU prepare and when it turns out to already exist in
starting throw it away later in the CPU online callback. But that's a
horrible hack and not required at all because RAPL becomes functional for
perf only in the CPU online callback. That's correct because user space is
not yet informed about the CPU being onlined, so nothing caan rely on RAPL
being available on that particular CPU.
Move the allocation to the CPU online callback and simplify the hotplug
handling. At this point the package mapping is established and correct.
This also adds a missing check for available package data in the
event_init() function.
Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Max Filippov [Wed, 1 Feb 2017 02:35:37 +0000 (18:35 -0800)]
xtensa: fix noMMU build on cores with MMU
Commit bf15f86b343ed8 ("xtensa: initialize MMU before jumping to reset
vector") calls MMU management functions even when CONFIG_MMU is not
selected. That breaks noMMU build on cores with MMU.
Don't manage MMU when CONFIG_MMU is not selected.
Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Linus Torvalds [Wed, 1 Feb 2017 00:32:40 +0000 (16:32 -0800)]
Merge tag 'trace-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"It was reported to me that the thread created by the hwlat tracer does
not migrate after the first instance. I found that there was as small
bug in the logic, and fixed it. It's minor, but should be fixed
regardless. There's not much impact outside the hwlat tracer"
* tag 'trace-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix hwlat kthread migration
Dave Airlie [Tue, 31 Jan 2017 22:45:27 +0000 (08:45 +1000)]
Merge tag 'drm-misc-fixes-2017-01-31' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
2 patches to fix the oops Dave Hanse reported, plus a double kfree fix
Maarten discovered while backporting the fix for Linus.
For Linus' vma tracking oops the plan is to send you a dedicated pull with
the 2 patches we need, but since it's tricky we're letting CI beat on it a
bit more.
* tag 'drm-misc-fixes-2017-01-31' of git://anongit.freedesktop.org/git/drm-misc:
drm/atomic: Fix double free in drm_atomic_state_default_clear
drm: Don't race connector registration
drm: prevent double-(un)registration for connectors
Linus Torvalds [Tue, 31 Jan 2017 21:59:10 +0000 (13:59 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"A fix for a crash in the wm97xx driver and synaptics-rmi4 will stop
throwing erroneous warnings."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake
Input: wm97xx - make missing platform data non-fatal
Linus Torvalds [Tue, 31 Jan 2017 21:54:41 +0000 (13:54 -0800)]
Merge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"The cgroup creation path was getting the order of operations wrong and
exposing cgroups which don't have their names set yet to controllers
which can lead to NULL derefs.
This contains the fix for the bug"
* 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: don't online subsystems before cgroup_name/path() are operational
Linus Torvalds [Tue, 31 Jan 2017 21:10:59 +0000 (13:10 -0800)]
Merge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu fix from Tejun Heo:
"Douglas found and fixed a ref leak bug in percpu_ref_tryget[_live]().
The bug is caused by storing the return value of atomic_long_inc_not_zero()
into an int temp variable before returning it as a bool. The interim
cast to int loses the upper bits and can lead to false negatives. As
percpu_ref uses a high bit to mark a draining counter, this can happen
relatively easily.
Fixed by using bool for the temp variable"
* 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu-refcount: fix reference leak during percpu-atomic transition
Linus Torvalds [Tue, 31 Jan 2017 21:07:04 +0000 (13:07 -0800)]
Merge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Three libata fixes: an error handling fix, blacklist addition for
another fallout from upping the default max sectors, and fix for a
sense data reporting bug which affects new harddrives which can report
sense data"
* 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: sata_mv:- Handle return value of devm_ioremap.
libata: Fix ATA request sense
libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices
Thomas Gleixner [Tue, 31 Jan 2017 08:37:34 +0000 (09:37 +0100)]
x86/mce: Make timer handling more robust
Erik reported that on a preproduction hardware a CMCI storm triggers the
BUG_ON in add_timer_on(). The reason is that the per CPU MCE timer is
started by the CMCI logic before the MCE CPU hotplug callback starts the
timer with add_timer_on(). So the timer is already queued which triggers
the BUG.
Using add_timer_on() is pretty pointless in this code because the timer is
strictlty per CPU, initialized as pinned and all operations which arm the
timer happen on the CPU to which the timer belongs.
Simplify the whole machinery by using mod_timer() instead of add_timer_on()
which avoids the problem because mod_timer() can handle already queued
timers. Use __start_timer() everywhere so the earliest armed expiry time is
preserved.
Reported-by: Erik Veijola <erik.veijola@intel.com> Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701310936080.3457@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>