Up until now the relative simplicity of enabling the ETB made it
possible to accommodate processing for both sysFS and perf methods.
But work on claimtags and CPU-wide trace scenarios is adding some
complexity, making the current code messy and hard to maintain.
As such follow what has been done for ETF and ETR components and split
function etb_enable() so that processing for both API can be done
cleanly.
This patch moves the etb_drvdata::mode from a locat_t to a simple u32,
as it is for the ETF and ETR drivers. This streamlines the code and adds
commonality with the other drivers when dealing with similar operations.
Add support for using TMC-ETR as backend for ETM perf tracing.
We use software double buffering at the moment. i.e, the TMC-ETR
uses a separate buffer than the perf ring buffer. The data is
copied to the perf ring buffer once a session completes.
The TMC-ETR would try to match the larger of perf ring buffer
or the ETR buffer size configured via sysfs, scaling down to
a minimum limit of 1MB.
In coresight perf mode, we need to prepare the sink before
starting a session, which is done via set_buffer call back.
We then proceed to enable the tracing. If we fail to start
the session successfully, we leave the sink configuration
unchanged. In order to make the operation atomic and to
avoid yet another call back to clear the buffer, we get
rid of the "set_buffer" call back and pass the buffer details
via enable() call back to the sink.
coresight: perf: Add helper to retrieve sink configuration
We can always find the sink configuration for a given perf_output_handle.
Add a helper to retrieve the sink configuration for a given
perf_output_handle. This will be used to get rid of the set_buffer()
call back.
coresight: perf: Remove reset_buffer call back for sinks
Right now we issue an update_buffer() and reset_buffer() call backs
in succession when we stop tracing an event. The update_buffer is
supposed to check the status of the buffer and make sure the ring buffer
is updated with the trace data. And we store information about the
size of the data collected only to be consumed by the reset_buffer
callback which always follows the update_buffer. This was originally
designed for handling future IPs which could trigger a buffer overflow
interrupt. This patch gets rid of the reset_buffer callback altogether
and performs the actions in update_buffer, making it return the size
collected. We can always add the support for handling the overflow
interrupt case later.
This removes some not-so pretty hack (storing the new head in the
size field for snapshot mode) and cleans it up a little bit.
Convert component enable/disable messages from dev_info to dev_dbg.
When used with perf, the components in the paths are enabled/disabled
during each schedule of the run, which can flood the dmesg with these
messages. Moreover, they are only useful for debug purposes. So,
convert such messages to dev_dbg() which can be turned on as
needed.
coresight: tmc-etr: Relax collection of trace from sysfs mode
Since the ETR now uses mode specific buffers, we can reliably
provide the trace data captured in sysfs mode, even when the ETR
is operating in PERF mode.
coresight: tmc-etr: Handle driver mode specific ETR buffers
Since the ETR could be driven either by SYSFS or by perf, it
becomes complicated how we deal with the buffers used for each
of these modes. The ETR driver cannot simply free the current
attached buffer without knowing the provider (i.e, sysfs vs perf).
To solve this issue, we provide:
1) the driver-mode specific etr buffer to be retained in the drvdata
2) the etr_buf for a session should be passed on when enabling the
hardware, which will be stored in drvdata->etr_buf. This will be
replaced (not free'd) as soon as the hardware is disabled, after
necessary sync operation.
The advantages of this are :
1) The common code path doesn't need to worry about how to dispose
an existing buffer, if it is about to start a new session with a
different buffer, possibly in a different mode.
2) The driver mode can control its buffers and can get access to the
saved session even when the hardware is operating in a different
mode. (e.g, we can still access a trace buffer from a sysfs mode
even if the etr is now used in perf mode, without disrupting the
current session.)
Towards this, we introduce a sysfs specific data which will hold the
etr_buf used for sysfs mode of operation, controlled solely by the
sysfs mode handling code.
coresight: perf: Disable trace path upon source error
We enable the trace path, before activating the source.
If we fail to enable the source, we must disable the path
to make sure it is available for another session.
At the moment, if there is no CPU specified for a given
event, we use cpu_online_mask and try to build path for
each of the CPUs in the mask. This could prevent any CPU
that is turned online later to be used for the tracing.
This patch changes to use the cpu_present_mask and tries
to build path for as much CPUs as possible ignoring the
failures in building path for some of the CPUs. If ever
we try to trace on those CPUs, we fail the operation.
We create a coresight trace path for each online CPU when
we start the event. We rely on the number of online CPUs
and then go on to allocate an array matching the "number of
online CPUs" for holding the path and then uses normal
CPU id as the index to the array. This is problematic as
we could have some offline CPUs causing us to access beyond
the actual array size (e.g, on a dual SMP system, if CPU0 is
offline, CPU1 could be really accessing beyond the array).
The solution is to switch to per-cpu array for holding the path.
The coresight components could be operated either in sysfs mode or in perf
mode. For some of the components, the mode of operation doesn't matter as
they simply relay the data to the next component in the trace path. But for
sinks, they need to be able to provide the trace data back to the user.
Thus we need to make sure that "mode" is handled appropriately. e.g,
the sysfs mode could have multiple sources driving the trace data, while
perf mode doesn't allow sharing the sink.
The coresight_enable_sink() however doesn't really allow this check to
trigger as it skips the "enable_sink" callback if the component is
already enabled, irrespective of the mode. This could cause mixing
of data from different modes or even same mode (in perf), if the
sources are different. Also, if we fail to enable the sink while
enabling a path (where sink is the first component enabled),
we could end up in disabling the components in the "entire"
path which were not enabled in this trial, causing disruptions
in the existing trace paths.
The coresight drivers relied on default bindings for graph
in DT, while reusing the "reg" field of the "ports" to indicate
the actual hardware port number for the connections. This can
cause duplicate ports with same addresses, but different
direction. However, with the rules getting stricter for the
address mismatch with the label, it is no longer possible to use
the port address field for the hardware port number.
This patch introduces new DT binding rules for coresight
components, based on the same generic DT graph bindings, but
avoiding the address duplication.
- All output ports must be specified under a child node with
name "out-ports".
- All input ports must be specified under a childe node with
name "in-ports".
- Port address should match the hardware port number.
The support for legacy bindings is retained, with a warning.
Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform code parses the component connections and populates
a platform-description of the output connections in arrays of fields
(which is never freed). This is later copied in the coresight_register
to a newly allocated area, represented by coresight_connection(s).
This patch cleans up the code dealing with connections by making
use of the "coresight_connection" structure right at the platform
code and lets the generic driver simply re-use information provided
by the platform.
Thus making it reader friendly as well as avoiding the wastage of
unused memory.
When parsing the remote endpoint of an output port, we do :
rport = of_graph_get_remote_port(ep);
rparent = of_graph_get_remote_port_parent(ep);
and then parse the "remote_port" as if it was the remote endpoint,
which is wrong. The code worked fine because we used endpoint number
as the port number. Let us fix it and optimise a bit as:
remote_ep = of_graph_get_remote_endpoint(ep);
if (remote_ep)
remote_parent = of_graph_get_port_parent(remote_ep);
and then, parse the remote_ep for the port/endpoint details.
We don't drop the reference on the remote device while parsing the
connection, held by bus_find_device(). Fix this by duplicating the
device name and dropping the reference.
coresight: Document error handling in coresight_register
commit 6403587a930c ("coresight: use put_device() instead of kfree()")
fixes the double freeing of resources and ensures that the device
refcount is dropped properly. Add a comment to explain this to
help the readers and prevent people trying to "unfix" it again.
While at it, rename the labels for better readability.
The Code of Conflict is not achieving its implicit goal of fostering
civility and the spirit of 'be excellent to each other'. Explicit
guidelines have demonstrated success in other projects and other areas
of the kernel.
Here is a Code of Conduct statement for the wider kernel. It is based
on the Contributor Covenant as described at www.contributor-covenant.org
From this point forward, we should abide by these rules in order to help
make the kernel community a welcoming environment to participate in.
Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Olof Johansson <olof@lxom.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingol Molnar:
"Misc fixes:
- EFI crash fix
- Xen PV fixes
- do not allow PTI on 2-level 32-bit kernels for now
- documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/APM: Fix build warning when PROC_FS is not enabled
Revert "x86/mm/legacy: Populate the user page-table with user pgd's"
x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3
x86/xen: Disable CPU0 hotplug for Xen PV
x86/EISA: Don't probe EISA bus for Xen PV guests
x86/doc: Fix Documentation/x86/earlyprintk.txt
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: various scheduler metrics corner case fixes, a
sched_features deadlock fix, and a topology fix for certain NUMA
systems"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix kernel-doc notation warning
sched/fair: Fix load_balance redo for !imbalance
sched/fair: Fix scale_rt_capacity() for SMT
sched/fair: Fix vruntime_normalized() for remote non-migration wakeup
sched/pelt: Fix update_blocked_averages() for RT and DL classes
sched/topology: Set correct NUMA topology type
sched/debug: Fix potential deadlock when writing to sched_features
Randy Dunlap [Fri, 14 Sep 2018 22:10:29 +0000 (15:10 -0700)]
x86/APM: Fix build warning when PROC_FS is not enabled
Fix build warning in apm_32.c when CONFIG_PROC_FS is not enabled:
../arch/x86/kernel/apm_32.c:1643:12: warning: 'proc_apm_show' defined but not used [-Wunused-function]
static int proc_apm_show(struct seq_file *m, void *v)
Fixes: 3f3942aca6da ("proc: introduce proc_create_single{,_data}") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jiri Kosina <jikos@kernel.org> Link: https://lkml.kernel.org/r/be39ac12-44c2-4715-247f-4dcc3c525b8b@infradead.org
Merge tag '4.19-rc3-smb3-cifs' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Fixes for four CIFS/SMB3 potential pointer overflow issues, one minor
build fix, and a build warning cleanup"
* tag '4.19-rc3-smb3-cifs' of git://git.samba.org/sfrench/cifs-2.6:
cifs: read overflow in is_valid_oplock_break()
cifs: integer overflow in in SMB2_ioctl()
CIFS: fix wrapping bugs in num_entries()
cifs: prevent integer overflow in nxt_dir_entry()
fs/cifs: require sha512
fs/cifs: suppress a string overflow warning
Merge tag 'nfs-for-4.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"These are a handful of fixes for problems that Trond found. Patch #1
and #3 have the same name, a second issue was found after applying the
first patch.
Stable bugfixes:
- v4.17+: Fix tracepoint Oops in initiate_file_draining()
- v4.11+: Fix an infinite loop on I/O
Other fixes:
- Return errors if a waiting layoutget is killed
- Don't open code clearing of delegation state"
* tag 'nfs-for-4.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Don't open code clearing of delegation state
NFSv4.1 fix infinite loop on I/O.
NFSv4: Fix a tracepoint Oops in initiate_file_draining()
pNFS: Ensure we return the error if someone kills a waiting layoutget
NFSv4: Fix a tracepoint Oops in initiate_file_draining()
Merge tag 'trace-v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This fixes an issue with the build system caused by a change that
modifies CC_FLAGS_FTRACE. The issue is that it breaks the dependencies
and causes "make targz-pkg" to rebuild the entire world"
* tag 'trace-v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/Makefile: Fix handling redefinition of CC_FLAGS_FTRACE
Merge tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fix from Rob Herring:
"One regression for a 20 year old PowerMac:
- Fix a regression on systems having a DT without any phandles which
happens on a PowerMac G3"
* tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fix phandle cache creation for DTs with no phandles
Merge tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains some minor cleanups and fixes:
- a new knob for controlling scrubbing of pages returned by the Xen
balloon driver to the Xen hypervisor to address a boot performance
issue seen in large guests booted pre-ballooned
- a fix of a regression in the gntdev driver which made it impossible
to use fully virtualized guests (HVM guests) with a 4.19 based dom0
- a fix in Xen cpu hotplug functionality which could be triggered by
wrong admin commands (setting number of active vcpus to 0)
One further note: the patches have all been under test for several
days in another branch. This branch has been rebased in order to avoid
merge conflicts"
* tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/gntdev: fix up blockable calls to mn_invl_range_start
xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage
xen: avoid crash in disable_hotplug_cpu
xen/balloon: add runtime control for scrubbing ballooned out pages
xen/manage: don't complain about an empty value in control/sysrq node
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The trickle of arm64 fixes continues to come in.
Nothing that's the end of the world, but we've got a fix for PCI IO
port accesses, an accidental naked "asm goto" and a fix to the
vmcoreinfo PT_NOTE merged this time around which we'd like to get
sorted before it becomes ABI.
- Fix ioport_map() mapping the wrong physical address for some I/O
BARs
- Remove direct use of "asm goto", since some compilers don't like
that
- Ensure kimage_voffset is always present in vmcoreinfo PT_NOTE"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
asm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO
arm64: kernel: arch_crash_save_vmcoreinfo() should depend on CONFIG_CRASH_CORE
arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"
The previous fix broke recovery of delegated stateids because it assumes
that if we did not mark the delegation as suspect, then the delegation has
effectively been revoked, and so it removes that delegation irrespectively
of whether or not it is valid and still in use. While this is "mostly
harmless" for ordinary I/O, we've seen pNFS fail with LAYOUTGET spinning
in an infinite loop while complaining that we're using an invalid stateid
(in this case the all-zero stateid).
What we rather want to do here is ensure that the delegation is always
correctly marked as needing testing when that is the case. So we want
to close the loophole offered by nfs4_schedule_stateid_recovery(),
which marks the state as needing to be reclaimed, but not the
delegation that may be backing it.
Merge tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fix from Vinod Koul:
"Fix the mic_x100_dma driver to use devm_kzalloc for driver memory, so
that it is freed properly when it unregisters from dmaengine using
managed API"
* tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: mic_x100_dma: use devm_kzalloc to fix an issue
Merge tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for -rc4.
The usual suspects of gadget, xhci, and dwc2/3 are in here, along with
some reverts of reported problem changes, and a number of build
documentation warning fixes. Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
Revert "cdc-acm: implement put_char() and flush_chars()"
usb: Change usb_of_get_companion_dev() place to usb/common
usb: xhci: fix interrupt transfer error happened on MTK platforms
usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
usb: misc: uss720: Fix two sleep-in-atomic-context bugs
usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()
usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id
usb/typec: fix kernel-doc notation warning for typec_match_altmode
usb: Don't die twice if PCI xhci host is not responding in resume
usb: mtu3: fix error of xhci port id when enable U3 dual role
usb: uas: add support for more quirk flags
USB: Add quirk to support DJI CineSSD
usb: typec: fix kernel-doc parameter warning
usb/dwc3/gadget: fix kernel-doc parameter warning
USB: yurex: Check for truncation in yurex_read()
USB: yurex: Fix buffer over-read in yurex_write()
usb: host: xhci-plat: Iterate over parent nodes for finding quirks
xhci: Fix use after free for URB cancellation on a reallocated endpoint
USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller
...
Merge tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a few small staging and iio driver fixes for -rc4.
Nothing major, just a few small bugfixes for some reported issues, and
a MAINTAINERS file update for the fbtft drivers.
We also re-enable the building of the erofs filesystem as the XArray
patches that were causing it to break never got merged in the -rc1
cycle, so there's no reason it can't be turned back on for now. The
problem that was previously there is now being handled in the Xarray
tree at the moment, so it will not hit us again in the future.
All of these patches have been in linux-next with no reported issues"
* tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vboxvideo: Change address of scanout buffer on page-flip
staging: vboxvideo: Fix IRQs no longer working
staging: gasket: TODO: re-implement using UIO
staging/fbtft: Update TODO and mailing lists
staging: erofs: rename superblock flags (MS_xyz -> SB_xyz)
iio: imu: st_lsm6dsx: take into account ts samples in wm configuration
Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"
Revert "staging: erofs: disable compiling temporarile"
MAINTAINERS: Switch a maintainer for drivers/staging/gasket
staging: wilc1000: revert "fix TODO to compile spi and sdio components in single module"
Merge tag 'char-misc-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a small handful of char/misc driver fixes for 4.19-rc4.
All of them are simple, resolving reported problems in a few drivers.
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
firmware: Fix security issue with request_firmware_into_buf()
vmbus: don't return values for uninitalized channels
fpga: dfl: fme: fix return value check in in pr_mgmt_init()
misc: hmc6352: fix potential Spectre v1
Tools: hv: Fix a bug in the key delete code
misc: ibmvsm: Fix wrong assignment of return code
android: binder: fix the race mmap and alloc_new_buf_locked
mei: bus: need to unlink client before freeing
mei: bus: fix hw module get/put balance
mei: fix use-after-free in mei_cl_write
mei: ignore not found client in the enumeration
It turned out that this patch is not sufficient to enable PTI on 32 bit
systems with legacy 2-level page-tables. In this paging mode the huge-page
PTEs are in the top-level page-table directory, where also the mirroring to
the user-space page-table happens. So every huge PTE exits twice, in the
kernel and in the user page-table.
That means that accessed/dirty bits need to be fetched from two PTEs in
this mode to be safe, but this is not trivial to implement because it needs
changes to generic code just for the sake of enabling PTI with 32-bit
legacy paging. As all systems that need PTI should support PAE anyway,
remove support for PTI when 32-bit legacy paging is used.
Fixes: 7757d607c6b3 ('x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32') Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: https://lkml.kernel.org/r/1536922754-31379-1-git-send-email-joro@8bytes.org
Stephen Boyd [Wed, 15 Aug 2018 20:37:08 +0000 (13:37 -0700)]
firmware: coreboot: Only populate devices in coreboot_table_init()
This function checks the header for sanity, registers a bus, and
populates devices for each coreboot table entry. Let's just populate
devices here and pull the other bits up into the caller so that this
function can be repurposed for pure device creation and registration.
Cc: Wei-Ning Huang <wnhuang@chromium.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Samuel Holland <samuel@sholland.org> Suggested-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Wed, 15 Aug 2018 20:37:07 +0000 (13:37 -0700)]
firmware: coreboot: Remap RAM with memremap() instead of ioremap()
This is all system memory, so we shouldn't be mapping this all with
ioremap() as these aren't I/O regions. Instead, they're memory regions
so we should use memremap(). Pick MEMREMAP_WB so we can map memory from
RAM directly if that's possible, otherwise it falls back to
ioremap_cache() like is being done here already. This also nicely
silences the sparse warnings in this code and reduces the need to copy
anything around anymore.
Cc: Wei-Ning Huang <wnhuang@chromium.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Samuel Holland <samuel@sholland.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Wed, 15 Aug 2018 20:37:06 +0000 (13:37 -0700)]
firmware: coreboot: Collapse platform drivers into bus core
The DT based and ACPI based platform drivers here do the same thing; map
some memory and hand it over to the coreboot bus to populate devices.
The only major difference is that the DT based driver doesn't map the
coreboot table header to figure out how large of a region to map for the
whole coreboot table and it uses of_iomap() instead of ioremap_cache().
A cached or non-cached mapping shouldn't matter here and mapping some
smaller region first before mapping the whole table is just more work
but should be OK. In the end, we can remove two files and combine the
code all in one place making it easier to reason about things.
We leave the old Kconfigs in place for a little while longer but make
them hidden and select the previously hidden config option. This way
users can upgrade without having to know to reselect this config in the
future. Later on we can remove the old hidden configs.
Cc: Wei-Ning Huang <wnhuang@chromium.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Samuel Holland <samuel@sholland.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Wed, 15 Aug 2018 20:37:05 +0000 (13:37 -0700)]
firmware: coreboot: Make bus registration symmetric
The bus is registered in module_init() but is unregistered when the
platform driver remove() function calls coreboot_table_exit(). That
isn't symmetric and it causes the bus to appear on systems that compile
this code in, even when there isn't any coreboot firmware on the device.
Let's move the registration to the coreboot_table_init() function so
that it matches the exit path.
Cc: Wei-Ning Huang <wnhuang@chromium.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Samuel Holland <samuel@sholland.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Wed, 15 Aug 2018 20:37:04 +0000 (13:37 -0700)]
firmware: coreboot: Unmap ioregion after device population
Both callers of coreboot_table_init() ioremap the pointer that comes in
but they don't unmap the memory on failure. Both of them also fail probe
immediately with the return value of coreboot_table_init(), leaking a
mapping when it fails. The mapping isn't necessary at all after devices
are populated either, so we can just drop the mapping here when we exit
the function. Let's do that to simplify the code a bit and plug the leak.
Cc: Wei-Ning Huang <wnhuang@chromium.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Samuel Holland <samuel@sholland.org> Fixes: 570d30c2823f ("firmware: coreboot: Expose the coreboot table as a bus") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Wed, 15 Aug 2018 20:37:03 +0000 (13:37 -0700)]
firmware: coreboot: Let OF core populate platform device
Now that the /firmware/coreboot node in DT is populated by the core DT
platform code with commit 3aa0582fdb82 ("of: platform: populate
/firmware/ node from of_platform_default_populate_init()") we should and
can remove the platform device creation here. Otherwise, the
of_platform_device_create() call will fail, the coreboot of driver won't
be registered, and this driver will never bind. At the same time, we
should move this driver to use MODULE_DEVICE_TABLE so that module
auto-load works properly when the coreboot device is auto-populated and
we should drop the of_node handling that was presumably placed here to
hold a reference to the DT node created during module init that no
longer happens.
Cc: Wei-Ning Huang <wnhuang@chromium.org> Cc: Julius Werner <jwerner@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Cc: Samuel Holland <samuel@sholland.org> Reviewed-by: Sudeep Holla <Sudeep.Holla@arm.com> Fixes: 3aa0582fdb82 ("of: platform: populate /firmware/ node from of_platform_default_populate_init()") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Kiryanov [Mon, 27 Aug 2018 18:23:01 +0000 (11:23 -0700)]
platform: goldfish: pipe: Fail compilation if structs are too large
Since the driver provides no workaround prevent in cases if structs do
no fit into a memory page, it is better to fail complation to find about
the issue earlt instead of returning errors at runtime.
Signed-off-by: Roman Kiryanov <rkir@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Mon, 3 Sep 2018 07:34:02 +0000 (09:34 +0200)]
firmware: google: make structure gsmi_dev static
The structure gsmi_dev is local to the source and does not need to be
in global scope, so make it static.
Cleans up sparse warning:
symbol 'gsmi_dev' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows the context manager to retrieve information about nodes
that it holds a reference to, such as the current number of
references to those nodes.
Such information can for example be used to determine whether the
servicemanager is the only process holding a reference to a node.
This information can then be passed on to the process holding the
node, which can in turn decide whether it wants to shut down to
reduce resource usage.
These were used to support the passing of fds between processes
as part of a transaction. The actual allocation and installation
of the fds in the target process was handled by the sending
process so the standard functions, alloc_fd() and fd_install()
which assume task==current couldn't be used.
This patch refactors this mechanism so that the fds are
allocated and installed by the target process allowing the
standard functions to be used.
The sender now creates a list of fd fixups that contains the
struct *file and the address to fixup with the new fd once
it is allocated. This list is processed by the target process
when the transaction is dequeued.
A new error case is introduced by this change. If an async
transaction with file descriptors cannot allocate new
fds in the target (probably due to out of file descriptors),
the transaction is discarded with a log message. In the old
implementation this would have been detected in the sender
context and failed prior to sending.
Sherry Yang [Tue, 14 Aug 2018 00:28:53 +0000 (17:28 -0700)]
android: binder: no outgoing transaction when thread todo has transaction
When a process dies, failed reply is sent to the sender of any transaction
queued on a dead thread's todo list. The sender asserts that the
received failed reply corresponds to the head of the transaction stack.
This assert can fail if the dead thread is allowed to send outgoing
transactions when there is already a transaction on its todo list,
because this new transaction can end up on the transaction stack of the
original sender. The following steps illustrate how this assertion can
fail.
1. Thread1 sends txn19 to Thread2
(T1->transaction_stack=txn19, T2->todo+=txn19)
2. Without processing todo list, Thread2 sends txn20 to Thread1
(T1->todo+=txn20, T2->transaction_stack=txn20)
3. T1 processes txn20 on its todo list
(T1->transaction_stack=txn20->txn19, T1->todo=<empty>)
4. T2 dies, T2->todo cleanup attempts to send failed reply for txn19, but
T1->transaction_stack points to txn20 -- assertion failes
Step 2. is the incorrect behavior. When there is a transaction on a
thread's todo list, this thread should not be able to send any outgoing
synchronous transactions. Only the head of the todo list needs to be
checked because only threads that are waiting for proc work can directly
receive work from another thread, and no work is allowed to be queued
on such a thread without waking up the thread. This patch also enforces
that a thread is not waiting for proc work when a work is directly
enqueued to its todo list.
Michal Hocko [Tue, 4 Sep 2018 23:21:39 +0000 (09:21 +1000)]
xen/gntdev: fix up blockable calls to mn_invl_range_start
Patch series "mmu_notifiers follow ups".
Tetsuo has noticed some fallouts from 93065ac753e4 ("mm, oom: distinguish
blockable mode for mmu notifiers"). One of them has been fixed and picked
up by AMD/DRM maintainer [1]. XEN issue is fixed by patch 1. I have also
clarified expectations about blockable semantic of invalidate_range_end.
Finally the last patch removes MMU_INVALIDATE_DOES_NOT_BLOCK which is no
longer used nor needed.
93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers") has
introduced blockable parameter to all mmu_notifiers and the notifier has
to back off when called in !blockable case and it could block down the
road.
The above commit implemented that for mn_invl_range_start but both
in_range checks are done unconditionally regardless of the blockable mode
and as such they would fail all the time for regular calls. Fix this by
checking blockable parameter as well.
Once we are there we can remove the stale TODO. The lock has to be
sleepable because we wait for completion down in gnttab_unmap_refs_sync.
Link: http://lkml.kernel.org/r/20180827112623.8992-2-mhocko@kernel.org Fixes: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers") Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
This happens because handle_vcpu_hotplug_event is called twice. In the
first iteration cpu_present is still true, in the second iteration
cpu_present is false which causes get_cpu_device to return NULL.
In case of cpu#0, cpu_online is apparently always true.
Fix this crash by checking if the cpu can be hotplugged, which is false
for a cpu that was just removed.
Also check if the cpu was actually offlined by device_remove, otherwise
leave the cpu_present state as it is.
Rearrange to code to do all work with device_hotplug_lock held.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
xen/balloon: add runtime control for scrubbing ballooned out pages
Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.
Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).
Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also
enabled by default), controlling default value for the new runtime
switch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
xen/manage: don't complain about an empty value in control/sysrq node
When guest receives a sysrq request from the host it acknowledges it by
writing '\0' to control/sysrq xenstore node. This, however, make xenstore
watch fire again but xenbus_scanf() fails to parse empty value with "%c"
format string:
Andrew Murray [Thu, 13 Sep 2018 12:48:27 +0000 (13:48 +0100)]
asm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO
The !CONFIG_GENERIC_IOMAP version of ioport_map uses MMIO_UPPER_LIMIT to
prevent users from making I/O accesses outside the expected I/O range -
however it erroneously treats MMIO_UPPER_LIMIT as a mask which is
contradictory to its other users.
The introduction of CONFIG_INDIRECT_PIO, which subtracts an arbitrary
amount from IO_SPACE_LIMIT to form MMIO_UPPER_LIMIT, results in ioport_map
mangling the given port rather than capping it.
We address this by aligning more closely with the CONFIG_GENERIC_IOMAP
implementation of ioport_map by using the comparison operator and
returning NULL where the port exceeds MMIO_UPPER_LIMIT. Though note that
we preserve the existing behavior of masking with IO_SPACE_LIMIT such that
we don't break existing buggy drivers that somehow rely on this masking.
Fixes: 5745392e0c2b ("PCI: Apply the new generic I/O management on PCI IO hosts") Reported-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Merge tag 'printk-for-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk fix from Petr Mladek:
"Revert a commit that caused "quiet", "debug", and "loglevel" early
parameters to be ignored for early boot messages"
* tag 'printk-for-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
Revert "printk: make sure to print log on console."
Merge tag 'ovl-fixes-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This fixes a regression in the recent file stacking update, reported
and fixed by Amir Goldstein. The fix is fairly trivial, but involves
adding a fadvise() f_op and the associated churn in the vfs. As
discussed on -fsdevel, there are other possible uses for this method,
than allowing proper stacking for overlays.
And there's one other fix for a syzkaller detected oops"
* tag 'ovl-fixes-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix oopses in ovl_fill_super() failure paths
ovl: add ovl_fadvise()
vfs: implement readahead(2) using POSIX_FADV_WILLNEED
vfs: add the fadvise() file operation
Documentation/filesystems: update documentation of file_operations
ovl: fix GPF in swapfile_activate of file from overlayfs over xfs
ovl: respect FIEMAP_FLAG_SYNC flag
Merge tag 'for-linus-20180913' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes that should go into this series. This contains:
- Increase number of policies supported by blk-cgroup.
With blk-iolatency, we now have four in kernel, but we had a hard
limit of three...
- Fix regression in null_blk, where the zoned supported broke
queue_mode=0 (bio based).
- NVMe pull request, with a single fix for an issue in the rdma code"
* tag 'for-linus-20180913' of git://git.kernel.dk/linux-block:
null_blk: fix zoned support for non-rq based operation
blk-cgroup: increase number of supported policies
nvmet-rdma: fix possible bogus dereference under heavy load
Merge tag 'for-4.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- DM verity fix for crash due to using vmalloc'd buffers with the
asynchronous crypto hadsh API.
- Fix to both DM crypt and DM integrity targets to discontinue using
CRYPTO_TFM_REQ_MAY_SLEEP because its use of GFP_KERNEL can lead to
deadlock by recursing back into a filesystem.
- Various DM raid fixes related to reshape and rebuild races.
- Fix for DM thin-provisioning to avoid data corruption that was a
side-effect of needing to abort DM thin metadata transaction due to
running out of metadata space. Fix is to reserve a small amount of
metadata space so that once it is used the DM thin-pool can finish
its active transaction before switching to read-only mode.
* tag 'for-4.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin metadata: try to avoid ever aborting transactions
dm raid: bump target version, update comments and documentation
dm raid: fix RAID leg rebuild errors
dm raid: fix rebuild of specific devices by updating superblock
dm raid: fix stripe adding reshape deadlock
dm raid: fix reshape race on small devices
dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlock
dm verity: fix crash on bufio buffer that was allocated with vmalloc
Merge tag 'drm-fixes-2018-09-14' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the general drm fixes pull for rc4.
i915:
- Two GVT fixes (one for the mm reference issue you pointed out)
- Gen 2 video playback fix
- IPS timeout error suppression on Broadwell
amdgpu:
- Small memory leak
- SR-IOV reset
- locking fix
- updated SDMA golden registers
nouveau:
- Remove some leftover debugging"
* tag 'drm-fixes-2018-09-14' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/devinit: fix warning when PMU/PRE_OS is missing
drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk
drm/i915/overlay: Allocate physical registers from stolen
drm/amdgpu: move PSP init prior to IH in gpu reset
drm/amdgpu: Fix SDMA hang in prt mode v2
drm/amdgpu: fix amdgpu_mn_unlock() in the CS error path
drm/i915/bdw: Increase IPS disable timeout to 100ms
drm/i915/gvt: Fix the incorrect length of child_device_config issue
drm/i915/gvt: Fix life cycle reference on KVM mm
Merge tag 'pstore-v4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore fix from Kees Cook:
"This fixes a 6 year old pstore bug that everyone just got lucky in
avoiding, likely due only using page-aligned persistent ram regions:
- Handle page-vs-byte offset handling between iomap and vmap (Bin Yang)"
* tag 'pstore-v4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Fix incorrect persistent ram buffer mapping
Merge tag 'mmc-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- meson-mx-sdio: Fix OF child-node lookup
- omap_hsmmc: Fix wakeirq handling on removal
* tag 'mmc-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: meson-mx-sdio: fix OF child-node lookup
mmc: omap_hsmmc: fix wakeirq handling on removal