docs: load_config.py: avoid needing a conf.py just due to LaTeX docs
Right now, for every directory that we need to have LaTeX output,
a conf.py file is required.
That causes an extra overhead and it is actually a hack, as
the latex_documents line there are usually a copy of the ones
that are there already at the main conf.py.
So, instead, re-use the global latex_documents var, just
adjusting the path to be relative ones.
On Gentoo, the portage changes for ImageMagick to work are
always suggested, even if already applied. While the two
extra commands should be harmless, add a check to avoid
reporting it without need.
docs: pdf: add all Documentation/*/index.rst to PDF output
Currently, all index files should be manually added to the
latex_documents array at conf.py.
While this allows fine-tuning some LaTeX specific things, like
the name of the output file and the name of the document, it
is not uncommon to forget adding new documents there.
So, add a logic that will seek for all Documentation/*/index.rst.
If the index is not yet at latex_documents, it includes using
a reasonable default.
docs: power: add it to to the main documentation index
The power docs are orphaned at the documentation body.
While it could likely be moved to be inside some guide, I'm opting to just
adding it to the main index.rst, removing the :orphan: and adding the SPDX
header.
The reason is similar to what it was done for other driver-specific
subsystems: the docs there contain a mix of Kernelspace, uAPI and
admin-guide. So, better to keep them on its own directory,
while the docs there are not properly classified.
docs: powerpc: convert docs to ReST and rename to *.rst
Convert docs to ReST and add them to the arch-specific
book.
The conversion here was trivial, as almost every file there
was already using an elegant format close to ReST standard.
The changes were mostly to mark literal blocks and add a few
missing section title identifiers.
One note with regards to "--": on Sphinx, this can't be used
to identify a list, as it will format it badly. This can be
used, however, to identify a long hyphen - and "---" is an
even longer one.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Merge tag 'for-5.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Highlights:
- chunks that have been trimmed and unchanged since last mount are
tracked and skipped on repeated trims
- use hw assissed crc32c on more arches, speedups if native
instructions or optimized implementation is available
- the RAID56 incompat bit is automatically removed when the last
block group of that type is removed
Fixes:
- fsync fix for reflink on NODATACOW files that could lead to ENOSPC
- fix data loss after inode eviction, renaming it, and fsync it
- fix fsync not persisting dentry deletions due to inode evictions
- update ctime/mtime/iversion after hole punching
- fix compression type validation (reported by KASAN)
- send won't be allowed to start when relocation is in progress, this
can cause spurious errors or produce incorrect send stream
Core:
- new tracepoints for space update
- tree-checker: better check for end of extents for some tree items
- preparatory work for more checksum algorithms
- run delayed iput at unlink time and don't push the work to cleaner
thread where it's not properly throttled
- wrap block mapping to structures and helpers, base for further
refactoring
- split large files, part 1:
- space info handling
- block group reservations
- delayed refs
- delayed allocation
- other cleanups and refactoring"
* tag 'for-5.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (103 commits)
btrfs: fix memory leak of path on error return path
btrfs: move the subvolume reservation stuff out of extent-tree.c
btrfs: migrate the delalloc space stuff to it's own home
btrfs: migrate btrfs_trans_release_chunk_metadata
btrfs: migrate the delayed refs rsv code
btrfs: Evaluate io_tree in find_lock_delalloc_range()
btrfs: migrate the global_block_rsv helpers to block-rsv.c
btrfs: migrate the block-rsv code to block-rsv.c
btrfs: stop using block_rsv_release_bytes everywhere
btrfs: cleanup the target logic in __btrfs_block_rsv_release
btrfs: export __btrfs_block_rsv_release
btrfs: export btrfs_block_rsv_add_bytes
btrfs: move btrfs_block_rsv definitions into it's own header
btrfs: Simplify update of space_info in __reserve_metadata_bytes()
btrfs: unexport can_overcommit
btrfs: move reserve_metadata_bytes and supporting code to space-info.c
btrfs: move dump_space_info to space-info.c
btrfs: export block_rsv_use_bytes
btrfs: move btrfs_space_info_add_*_bytes to space-info.c
btrfs: move the space info update macro to space-info.h
...
Merge tag 'arc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- long due rewrite of do_page_fault
- refactoring of entry/exit code to utilize the double load/store
instructions
- hsdk platform updates
* tag 'arc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk]: Enable AXI DW DMAC in defconfig
ARC: [plat-hsdk]: enable DW SPI controller
ARC: hide unused function unw_hdr_alloc
ARC: [haps] Add Virtio support
ARCv2: entry: simplify return to Delay Slot via interrupt
ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause
ARCv2: entry: rewrite to enable use of double load/stores LDD/STD
ARCv2: entry: avoid a branch
ARCv2: entry: push out the Z flag unclobber from common EXCEPTION_PROLOGUE
ARCv2: entry: comments about hardware auto-save on taken interrupts
ARC: mm: do_page_fault refactor #8: release mmap_sem sooner
ARC: mm: do_page_fault refactor #7: fold the various error handling
ARC: mm: do_page_fault refactor #6: error handlers to use same pattern
ARC: mm: do_page_fault refactor #5: scoot no_context to end
ARC: mm: do_page_fault refactor #4: consolidate retry related logic
ARC: mm: do_page_fault refactor #3: tidyup vma access permission code
ARC: mm: do_page_fault refactor #2: remove short lived variable
ARC: mm: do_page_fault refactor #1: remove label @good_area
Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull rst conversion of docs from Mauro Carvalho Chehab:
"As agreed with Jon, I'm sending this big series directly to you, c/c
him, as this series required a special care, in order to avoid
conflicts with other trees"
* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
docs: kbuild: fix build with pdf and fix some minor issues
docs: block: fix pdf output
docs: arm: fix a breakage with pdf output
docs: don't use nested tables
docs: gpio: add sysfs interface to the admin-guide
docs: locking: add it to the main index
docs: add some directories to the main documentation index
docs: add SPDX tags to new index files
docs: add a memory-devices subdir to driver-api
docs: phy: place documentation under driver-api
docs: serial: move it to the driver-api
docs: driver-api: add remaining converted dirs to it
docs: driver-api: add xilinx driver API documentation
docs: driver-api: add a series of orphaned documents
docs: admin-guide: add a series of orphaned documents
docs: cgroup-v1: add it to the admin-guide book
docs: aoe: add it to the driver-api book
docs: add some documentation dirs to the driver-api book
docs: driver-model: move it to the driver-api book
docs: lp855x-driver.rst: add it to the driver-api book
...
Merge tag 'xtensa-20190715' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- clean up PCI support code
- add defconfig and DTS for the 'virt' board
- abstract 'entry' and 'retw' uses in xtensa assembly in preparation
for XEA3/NX pipeline support
- random small cleanups
* tag 'xtensa-20190715' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: virt: add defconfig and DTS
xtensa: abstract 'entry' and 'retw' in assembly code
xtensa: One function call less in bootmem_init()
xtensa: remove arch/xtensa/include/asm/types.h
xtensa: use generic pcibios_set_master and pcibios_enable_device
xtensa: drop dead PCI support code
xtensa/PCI: Remove unused variable
Merge tag 'safesetid-5.3' of git://github.com/micah-morton/linux
Pull safesetid updates from Micah Morton:
"These changes from Jann Horn fix a couple issues in the recently added
SafeSetID LSM:
- There was a simple logic bug in one of the hooks for the LSM where
the code was incorrectly returning early in some cases before all
security checks had been passed.
- There was a more high level issue with how this LSM gets configured
that could allow for a program to bypass the security restrictions
by switching to an allowed UID and then again to any other UID on
the system if the target UID of the first transition is
unconstrained on the system. Luckily this is an easy fix that we
now enforce at the time the LSM gets configured.
There are also some changes from Jann that make policy updates for
this LSM atomic. Kees Cook, Jann and myself have reviewed these
changes and they look good from our point of view"
* tag 'safesetid-5.3' of git://github.com/micah-morton/linux:
LSM: SafeSetID: fix use of literal -1 in capable hook
LSM: SafeSetID: verify transitive constrainedness
LSM: SafeSetID: add read handler
LSM: SafeSetID: rewrite userspace API to atomic updates
LSM: SafeSetID: fix userns handling in securityfs
LSM: SafeSetID: refactor policy parsing
LSM: SafeSetID: refactor safesetid_security_capable()
LSM: SafeSetID: refactor policy hash table
LSM: SafeSetID: fix check for setresuid(new1, new2, new3)
LSM: SafeSetID: fix pr_warn() to include newline
Merge tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd and clone3 fixes from Christian Brauner:
"This contains a bugfix for CLONE_PIDFD when used with the legacy clone
syscall, two fixes to ensure that syscall numbering and clone3
entrypoint implementations will stay consistent, and an update for the
maintainers file:
- The addition of clone3 broke CLONE_PIDFD for legacy clone on all
architectures that use do_fork() directly instead of calling the
clone syscall itself. (Fwiw, cleaning do_fork() up is on my todo.)
The reason this happened was that during conversion of _do_fork()
to use struct kernel_clone_args we missed that do_fork() is called
directly by various architectures. This is fixed by making sure
that the pidfd argument in struct kernel_clone_args is correctly
initialized with the parent_tidptr argument passed down from
do_fork(). Additionally, do_fork() missed a check to make
CLONE_PIDFD and CLONE_PARENT_SETTID mutually exclusive just a
clone() does. This is now fixed too.
- When clone3() was introduced we skipped architectures that require
special handling for fork-like syscalls. Their syscall tables did
not contain any mention of clone3().
To make sure that Arnd's work to make syscall numbers on all
architectures identical (minus alpha) was not for naught we are
placing a comment in all syscall tables that do not yet implement
clone3(). The comment makes it clear that 435 is reserved for
clone3 and should not be used.
- Also, this contains a patch to make the clone3() syscall definition
in asm-generic/unist.h conditional on __ARCH_WANT_SYS_CLONE3. This
lets us catch new architectures that implicitly make use of clone3
without setting __ARCH_WANT_SYS_CLONE3 which is a good indicator
that they did not check whether it needs special treatment or not.
- Finally, this contains a patch to add me as maintainer for pidfd
stuff so people can start blaming me (more)"
* tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
MAINTAINERS: add new entry for pidfd api
unistd: protect clone3 via __ARCH_WANT_SYS_CLONE3
arch: mark syscall number 435 reserved for clone3
clone: fix CLONE_PIDFD support
It rewrites the logic entirely, splitting it into two separate commits
(and two separate functions) for the two different cases ("unedited
cmdline" vs "setproctitle() has been used to change the command line").
* proc-cmdline:
/proc/<pid>/cmdline: add back the setproctitle() special case
/proc/<pid>/cmdline: remove all the special cases
/proc/<pid>/cmdline: add back the setproctitle() special case
This makes the setproctitle() special case very explicit indeed, and
handles it with a separate helper function entirely. In the process, it
re-instates the original semantics of simply stopping at the first NUL
character when the original last NUL character is no longer there.
[ The original semantics can still be seen in mm/util.c: get_cmdline()
that is limited to a fixed-size buffer ]
This makes the logic about when we use the string lengths etc much more
obvious, and makes it easier to see what we do and what the two very
different cases are.
Note that even when we allow walking past the end of the argument array
(because the setproctitle() might have overwritten and overflowed the
original argv[] strings), we only allow it when it overflows into the
environment region if it is immediately adjacent.
[ Fixed for missing 'count' checks noted by Alexey Izbyshev ]
Start off with a clean slate that only reads exactly from arg_start to
arg_end, without any oddities. This simplifies the code and in the
process removes the case that caused us to potentially leak an
uninitialized byte from the temporary kernel buffer.
Note that in order to start from scratch with an understandable base,
this simplifies things _too_ much, and removes all the legacy logic to
handle setproctitle() having changed the argument strings.
We'll add back those special cases very differently in the next commit.
Merge tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Provide support for ACPI enumeration; gpio_backlight
Fix-ups:
- SPDX fixups; pwm_bl
- Fix linear brightness levels to include number available; pwm_bl"
* tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Fix heuristic to determine number of brightness levels
backlight: gpio_backlight: Enable ACPI enumeration
backlight: pwm_bl: Convert to use SPDX identifier
Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A later pull request with some followup items. I had some vacation
coming up to the merge window, so certain things items were delayed a
bit. This pull request also contains fixes that came in within the
last few days of the merge window, which I didn't want to push right
before sending you a pull request.
This contains:
- NVMe pull request, mostly fixes, but also a few minor items on the
feature side that were timing constrained (Christoph et al)
- Report zones fixes (Damien)
- Removal of dead code (Damien)
- Turn on cgroup psi memstall (Josef)
- block cgroup MAINTAINERS entry (Konstantin)
- Flush init fix (Josef)
- blk-throttle low iops timing fix (Konstantin)
- nbd resize fixes (Mike)
- nbd 0 blocksize crash fix (Xiubo)
- block integrity error leak fix (Wenwen)
- blk-cgroup writeback and priority inheritance fixes (Tejun)"
* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
MAINTAINERS: add entry for block io cgroup
null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
block: Limit zone array allocation size
sd_zbc: Fix report zones buffer allocation
block: Kill gfp_t argument of blkdev_report_zones()
block: Allow mapping of vmalloc-ed buffers
block/bio-integrity: fix a memory leak bug
nvme: fix NULL deref for fabrics options
nbd: add netlink reconfigure resize support
nbd: fix crash when the blksize is zero
block: Disable write plugging for zoned block devices
block: Fix elevator name declaration
block: Remove unused definitions
nvme: fix regression upon hot device removal and insertion
blk-throttle: fix zero wait time for iops throttled group
block: Fix potential overflow in blk_report_zones()
blkcg: implement REQ_CGROUP_PUNT
blkcg, writeback: Implement wbc_blkcg_css()
blkcg, writeback: Add wbc->no_cgroup_owner
blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
...
Merge tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Core:
- add HWMON compat layer
- new properties:
- input power limit
- input voltage limit
Drivers:
- qcom-pon: add gen2 support
- new driver for storing reboot move in NVMEM
- new driver for Wilco EC charger configuration
- simplify getting the adapter of a client"
* tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: reset: nvmem-reboot-mode: add CONFIG_OF dependency
power_supply: wilco_ec: Add charging config driver
power: supply: cros: allow to set input voltage and current limit
power: supply: add input power and voltage limit properties
power: supply: fix semicolon.cocci warnings
power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface
dt-bindings: power: reset: add document for NVMEM based reboot-mode
reset: qcom-pon: Add support for gen2 pon
dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line
power: supply: Add HWMON compatibility layer
power: supply: sbs-manager: simplify getting the adapter of a client
power: supply: rt9455_charger: simplify getting the adapter of a client
power: supply: rt5033_battery: simplify getting the adapter of a client
power: supply: max17042_battery: simplify getting the adapter of a client
power: supply: max17040_battery: simplify getting the adapter of a client
power: supply: max14656_charger_detector: simplify getting the adapter of a client
power: supply: bq25890_charger: simplify getting the adapter of a client
power: supply: bq24257_charger: simplify getting the adapter of a client
power: supply: bq24190_charger: simplify getting the adapter of a client
- Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"
* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
PCI: Enable NVIDIA HDA controllers
tools: PCI: Fix installation when `make tools/pci_install`
PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
PCI: Fix typos and whitespace errors
PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
PCI: mobiveil: Fix infinite-loop in the INTx handling function
PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
PCI: mobiveil: Clear the control fields before updating it
PCI: mobiveil: Add configured inbound windows counter
PCI: mobiveil: Fix the valid check for inbound and outbound windows
PCI: mobiveil: Clean-up program_{ib/ob}_windows()
PCI: mobiveil: Remove an unnecessary return value check
PCI: mobiveil: Fix error return values
PCI: mobiveil: Refactor the MEM/IO outbound window initialization
PCI: mobiveil: Make some register updates more readable
PCI: mobiveil: Reformat the code for readability
dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
...
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out
of the drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
RMDA/siw: Require a 64 bit arch
RDMA/siw: Mark expected switch fall-throughs
RDMA/core: Fix -Wunused-const-variable warnings
rdma/siw: Remove set but not used variable 's'
rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
RDMA/siw: Add missing rtnl_lock around access to ifa
rdma/siw: Use proper enumerated type in map_cqe_status
RDMA/siw: Remove unnecessary kthread create/destroy printouts
IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
RDMA/core: Fix race when resolving IP address
RDMA/core: Make rdma_counter.h compile stand alone
IB/core: Work on the caller socket net namespace in nldev_newlink()
RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
RDMA/mlx5: Set RDMA DIM to be enabled by default
RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
RDMA/core: Provide RDMA DIM support for ULPs
linux/dim: Implement RDMA adaptive moderation (DIM)
IB/mlx5: Report correctly tag matching rendezvous capability
docs: infiniband: add it to the driver-api bookset
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
...
New Device Support:
- Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
- Add support for RK809 and RK817 to Rockchip RK808
- Add support for Lid Angle to ChromeOS core
- Add support for CS47L15 CODEC to Madera core
- Add support for CS47L92 CODEC to Madera core
- Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
- Add support for Add Intel Elkhart Lake PCH to Intel LPSS
New Functionality:
- Provide regulator supply information when registering; madera-core
- Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
- Allow over-riding power button press via Device Tree; rohm-bd718x7
- Differentiate between running processors; cros_ec_dev
Fix-ups:
- Big header file update; cros_ec_commands.h
- Split header per-subsystem; rohm-bd718x7
- Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
- Trivial; sorting, coding style; intel-lpss-pci
- Only remove Power Off functionality if set locally; rk808
- Make use for Power Off Prepare(); rk808
- Fix spelling mistake in header guards; stmfx
- Properly free IDA resources
- SPDX fixups; cs47lXX-tables, madera
- Error path fixups; hi655x-pmic
Bug Fixes:
- Add missing break in case() statement
- Repair undefined behaviour when not initialising variables; arizona-core, madera-core
- Fix reference to Device Tree documentation; madera"
* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
mfd: madera: Fixup SPDX headers
mfd: madera: Remove some unused registers and fix some defaults
mfd: intel-lpss: Release IDA resources
mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
mfd: cs5535-mfd: Remove ifdef OLPC noise
mfd: stmfx: Fix macro definition spelling
dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
mfd: rk808: Prepare rk805 for poweroff
mfd: rk808: Check pm_power_off pointer
mfd: cros_ec: differentiate SCP from EC by feature bit
dt-bindings: Add binding for cros-ec-rpmsg
mfd: madera: Add Madera core support for CS47L92
mfd: madera: Add Madera core support for CS47L15
mfd: madera: Update DT bindings to add additional CODECs
mfd: madera: Add supply mapping for MICVDD
mfd: madera: Fix potential uninitialised use of variable
mfd: madera: Fix bad reference to pinctrl.txt file
...
Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"The biggest thing in this is the AMD Navi GPU support, this again
contains a bunch of header files that are large. These are the new AMD
RX5700 GPUs that just recently became available.
New drivers:
- ST-Ericsson MCDE driver
- Ingenic JZ47xx SoC
UAPI change:
- HDR source metadata property
Core:
- HDR inforframes and EDID parsing
- drm hdmi infoframe unpacking
- remove prime sg_table caching into dma-buf
- New gem vram helpers to reduce driver code
- Lots of drmP.h removal
- reservation fencing fix
- documentation updates
- drm_fb_helper_connector removed
- mode name command handler rewrite
fbcon:
- Remove the fbcon notifiers
ttm:
- forward progress fixes
dma-buf:
- make mmap call optional
- debugfs refcount fixes
- dma-fence free with pending signals fix
- each dma-buf gets an inode
Panels:
- Lots of additional panel bindings
amdgpu:
- initial navi10 support
- avoid hw reset
- HDR metadata support
- new thermal sensors for vega asics
- RAS fixes
- use HMM rather than MMU notifier
- xgmi topology via kfd
- SR-IOV fixes
- driver reload fixes
- DC use a core bpc attribute
- Aux fixes for DC
- Bandwidth calc updates for DC
- Clock handling refactor
- kfd VEGAM support
vmwgfx:
- Coherent memory support changes
i915:
- HDR Support
- HDMI i2c link
- Icelake multi-segmented gamma support
- GuC firmware update
- Mule Creek Canyon PCH support for EHL
- EHL platform updtes
- move i915.alpha_support to i915.force_probe
- runtime PM refactoring
- VBT parsing refactoring
- DSI fixes
- struct mutex dependency reduction
- GEM code reorg
mali-dp:
- Komeda driver features
msm:
- dsi vs EPROBE_DEFER fixes
- msm8998 snapdragon 835 support
- a540 gpu support
- mdp5 and dpu interconnect support
exynos:
- drmP.h removal
tegra:
- misc fixes
tda998x:
- audio support improvements
- pixel repeated mode support
- quantisation range handling corrections
- HDMI vendor info fix
armada:
- interlace support fix
- overlay/video plane register handling refactor
- add gamma support
rockchip:
- RX3328 support
panfrost:
- expose perf counters via hidden ioctls
vkms:
- enumerate CRC sources list
ast:
- rework BO handling
mgag200:
- rework BO handling
dw-hdmi:
- suspend/resume support
rcar-du:
- R8A774A1 Soc Support
- LVDS dual-link mode support
- Additional formats
- Misc fixes
* tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits)
Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next"
Revert "mm: adjust apply_to_pfn_range interface for dropped token."
mm: adjust apply_to_pfn_range interface for dropped token.
drm/amdgpu/navi10: add uclk activity sensor
drm/amdgpu: properly guard the generic discovery code
drm/amdgpu: add missing documentation on new module parameters
drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback
drm/amd/display: avoid 64-bit division
drm/amdgpu/psp11: simplify the ucode register logic
drm/amdgpu: properly guard DC support in navi code
drm/amd/powerplay: vega20: fix uninitialized variable use
drm/amd/display: dcn20: include linux/delay.h
amdgpu: make pmu support optional
drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent
drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq
drm/amd/powerplay: Use memset to initialize metrics structs
drm/amdgpu/mes10.1: Fix header guard
drm/amd/powerplay: add temperature sensor support for navi10
drm/amdgpu: fix scheduler timeout calc
drm/amdgpu: Prepare for hmm_range_register API change (v2)
...
The mm changes in there we premature and not fully ack or reviewed by core mm folks,
I dropped the ball by merging them via this tree, so lets take em all back out.
Someone might write a ruleset like the following, expecting that it
securely constrains UID 1 to UIDs 1, 2 and 3:
1:2
1:3
However, because no constraints are applied to UIDs 2 and 3, an attacker
with UID 1 can simply first switch to UID 2, then switch to any UID from
there. The secure way to write this ruleset would be:
1:2
1:3
2:2
3:3
, which uses "transition to self" as a way to inhibit the default-allow
policy without allowing anything specific.
This is somewhat unintuitive. To make sure that policy authors don't
accidentally write insecure policies because of this, let the kernel verify
that a new ruleset does not contain any entries that are constrained, but
transitively unconstrained.
For debugging a running system, it is very helpful to be able to see what
policy the system is using. Add a read handler that can dump out a copy of
the loaded policy.
LSM: SafeSetID: rewrite userspace API to atomic updates
The current API of the SafeSetID LSM uses one write() per rule, and applies
each written rule instantly. This has several downsides:
- While a policy is being loaded, once a single parent-child pair has been
loaded, the parent is restricted to that specific child, even if
subsequent rules would allow transitions to other child UIDs. This means
that during policy loading, set*uid() can randomly fail.
- To replace the policy without rebooting, it is necessary to first flush
all old rules. This creates a time window in which no constraints are
placed on the use of CAP_SETUID.
- If we want to perform sanity checks on the final policy, this requires
that the policy isn't constructed in a piecemeal fashion without telling
the kernel when it's done.
Other kernel APIs - including things like the userns code and netfilter -
avoid this problem by performing updates atomically. Luckily, SafeSetID
hasn't landed in a stable (upstream) release yet, so maybe it's not too
late to completely change the API.
The new API for SafeSetID is: If you want to change the policy, open
"safesetid/whitelist_policy" and write the entire policy,
newline-delimited, in there.
Looking at current_cred() in write handlers is bad form, stop doing that.
Also, let's just require that the write is coming from the initial user
namespace. Especially SAFESETID_WHITELIST_FLUSH requires privilege over all
namespaces, and SAFESETID_WHITELIST_ADD should probably require it as well.
At the moment, safesetid_security_capable() has two nested conditional
blocks, and one big comment for all the logic. Chop it up and reduce the
amount of indentation.
parent_kuid and child_kuid are kuids, there is no reason to make them
uint64_t. (And anyway, in the kernel, the normal name for that would be
u64, not uint64_t.)
check_setuid_policy_hashtable_key() and
check_setuid_policy_hashtable_key_value() are basically the same thing,
merge them.
Also fix the comment that claimed that (1<<8)==128.
LSM: SafeSetID: fix check for setresuid(new1, new2, new3)
With the old code, when a process with the (real,effective,saved) UID set
(1,1,1) calls setresuid(2,3,4), safesetid_task_fix_setuid() only checks
whether the transition 1->2 is permitted; the transitions 1->3 and 1->4 are
not checked. Fix this.
This is also a good opportunity to refactor safesetid_task_fix_setuid() to
be less verbose - having one branch per set*uid() syscall is unnecessary.
Note that this slightly changes semantics: The UID transition check for
UIDs that were not in the old cred struct is now always performed against
the policy of the RUID. I think that's more consistent anyway, since the
RUID is also the one that decides whether any policy is enforced at all.
Fix the pr_warn() calls in the SafeSetID LSM to have newlines at the end.
Without this, denial messages will be buffered as incomplete lines in
log_output(), and will then only show up once something else prints into
dmesg.
docs: kbuild: fix build with pdf and fix some minor issues
The tag ".. include" should be replaced by ".. literalinclude" at
issues.rst, otherwise it causes TeX to crash due to excessive usage
of stack with Sphinx 2.0.
While here, solve a few minor issues at the kbuild book output by
adding extra blank lines.
Nested tables aren't supported for pdf output on Sphinx 1.7.9:
admin-guide/laptops/sonypi:: nested tables are not yet implemented.
admin-guide/laptops/toshiba_haps:: nested tables are not yet implemented.
driver-api/nvdimm/btt:: nested tables are not yet implemented.
s390/debugging390:: nested tables are not yet implemented.
docs: add some directories to the main documentation index
The contents of those directories were orphaned at the documentation
body.
While those directories could likely be moved to be inside some guide,
I'm opting to just adding their indexes to the main one, removing the
:orphan: and adding the SPDX header.
For the drivers, the rationale is that the documentation contains
a mix of Kernelspace, uAPI and admin-guide. So, better to keep them on
separate directories, as we've be doing with similar subsystem-specific
docs that were not split yet.
For the others, well... I'm too lazy to do the move. Also, it
seems to make sense to keep at least some of those at the main
dir (like kbuild, for example). In any case, a latter patch
could do the move.
docs: driver-api: add remaining converted dirs to it
There are a number of driver-specific descriptions that contain a
mix of userspace and kernelspace documentation. Just like we did
with other similar subsystems, add them at the driver-api
groupset, but don't move the directories.
docs: add some documentation dirs to the driver-api book
Those are subsystem docs, with a mix of kABI and user-faced
docs. While they're not split, keep the dirs where they are,
adding just a pointer to the main index.
The stuff under sysctl describes /sys interface from userspace
point of view. So, add it to the admin-guide and remove the
:orphan: from its index file.
While I was tempted to move it to admin-guide, as some docs
there are more userspace-faced, there are some very technical
discussions about memory error correction code from the Kernel
implementer's PoV. So, let's place it inside the driver-api
book.
Rename the /proc/sys/ documentation files to ReST, using the
README file as a template for an index.rst, adding the other
files there via TOC markup.
Despite being written on different times with different
styles, try to make them somewhat coherent with a similar
look and feel, ensuring that they'll look nice as both
raw text file and as via the html output produced by the
Sphinx build system.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
It basically add blank lines on a few interesting places. The
script is not perfect: still several things require manual work,
but it saved quite some time doing some obvious stuff.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
The conversion itself is simple: add a markup for the
title of this file and add markups for both tables.
Yet, the big table here with IOCTL numbers is badly formatted:
on several lines, the "Include File" column has some values that
are bigger than the reserved space there.
Also, on several places, a comment was misplaced at the "Include
File" space.
So, most of the work here is to actually ensure that each field
will be properly fixed.
Also worth to mention that some URLs have the asterisk character
on it. Well, Sphinx has an issue with asterisks in the middle
of an string. As this is URL, use the alternate format: %2A.
As a side effect of this patch, it is now a lot easier to see that
some reserved ioctl numbers are missing the include files
where it is supposed to be used.
PS.: While this is part of a subdir, I opted to convert this
single file alone, as this file has a potential of conflicts,
as most subsystem maintainers touch it.
Rename the mtd documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.
It should be noticed that Sphinx doesn't handle very well
URLs with dots in the middle. Thankfully, internally, the '.'
char is translated to %2E, so we can jus use %2E instead of
dots, and this will work fine on both text and processed files.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.