Bhumika Goyal [Mon, 21 Aug 2017 11:43:10 +0000 (17:13 +0530)]
qlogic: make device_attribute const
Make these const as they are only passed as an argument to the
function device_create_file and device_remove_file and the corresponding
arguments are of type const.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Support RX checksum with IPsec crypto offload for esp4/esp6.
From Ilan Tayari.
2) Fixup IPv6 checksums when doing IPsec crypto offload.
From Yossi Kuperman.
3) Auto load the xfrom offload modules if a user installs
a SA that requests IPsec offload. From Ilan Tayari.
4) Clear RX offload informations in xfrm_input to not
confuse the TX path with stale offload informations.
From Ilan Tayari.
5) Allow IPsec GSO for local sockets if the crypto operation
will be offloaded.
6) Support setting of an output mark to the xfrm_state.
This mark can be used to to do the tunnel route lookup.
From Lorenzo Colitti.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rick Farrington [Sat, 19 Aug 2017 01:21:49 +0000 (18:21 -0700)]
liquidio: fix use of pf in pass-through mode in a virtual machine
Fix problem when PF is used in pass-through mode in a VM (w/embedded f/w).
If host error reading PF num from CN23XX_PCIE_SRIOV_FDL reg,
try to retrieve PF num from SLI_PKT(0)_INPUT_CONTROL (initialized by f/w).
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ibm: emac: Fix some error handling path in 'emac_probe()'
If 'irq_of_parse_and_map()' or 'of_address_to_resource()' fail, 'err' is
known to be 0 at this point.
So return -ENODEV instead in the first case and use 'of_iomap()' instead of
the equivalent 'of_address_to_resource()/ioremap()' combinaison in the 2nd
case.
Doing so, the 'rsrc_regs' field of the 'emac_instance struct' becomes
redundant and is removed.
While at it, turn a 'err != 0' test into an equivalent 'err' to be more
consistent.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Sun, 20 Aug 2017 08:45:51 +0000 (14:15 +0530)]
cxgb4/cxgbvf: Handle 32-bit fw port capabilities
Implement new 32-bit Firmware Port Capabilities in order to
handle new speeds which couldn't be represented in the old 16-bit
Firmware Port Capabilities values.
Based on the original work of Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Sun, 20 Aug 2017 23:48:12 +0000 (01:48 +0200)]
bpf: fix double free from dev_map_notification()
In the current code, dev_map_free() can still race with dev_map_notification().
In dev_map_free(), we remove dtab from the list of dtabs after we purged
all entries from it. However, we don't do xchg() with NULL or the like,
so the entry at that point is still pointing to the device. If a unregister
notification comes in at the same time, we therefore risk a double-free,
since the pointer is still present in the map, and then pushed again to
__dev_map_entry_free().
All this is completely unnecessary. Just remove the dtab from the list
right before the synchronize_rcu(), so all outstanding readers from the
notifier list have finished by then, thus we don't need to deal with this
corner case anymore and also wouldn't need to nullify dev entires. This is
fine because we iterate over the map releasing all entries and therefore
dev references anyway.
Fixes: 4cc7b9544b9a ("bpf: devmap fix mutex in rcu critical section") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Add outbound_pci_buffer_overflow to ethtool output for monitoring the
number of packets that were dropped due to lack of PCIe buffers on
receive path from NIC port toward the host(s).
This counter is valid only in case that tx_overflow_buffer_pkt is
supported in MCAM enhanced features.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Gal Pressman [Thu, 15 Jun 2017 15:29:32 +0000 (18:29 +0300)]
net/mlx5e: Add PCIe outbound stalls counters
outbound_pci_stalled_rd - The percentage of time within the last second
that the NIC had outbound non-posted read requests but could not perform
the operation due to insufficient non-posted credits.
outbound_pci_stalled_wr - The percentage of time within the
last second that the NIC had outbound posted writes requests but could
not perform the operation due to insufficient posted credits.
outbound_pci_stalled_rd_events - The number of events where
outbound_pci_stalled_rd was above the threshold.
outbound_pci_stalled_wr_events - The number of events where
outbound_pci_stalled_wr was above the threshold.
Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Shalom Lagziel [Sun, 28 May 2017 13:40:24 +0000 (16:40 +0300)]
net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool
Add support for "ethtool DEVNAME" over ipoib ports,
Display standard port information for IPoIB netdevices using ethtool
For example:
$ ethtool ib2
> Settings for ib2:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 100000Mb/s
Duplex: Full
Port: Other
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Link detected: yes
net/mlx5e: IPoIB, Fix driver name retrieved by ethtool
Printing an enhanced IPoIB device information using
"ethtool -i DEVNAME", prints the low level driver name: mlx5_core.
This commit changes the name to mlx5_core [ib_ipoib], to include the
ipoib device driver infromation.
Eran Ben Elisha [Sun, 5 Feb 2017 15:57:40 +0000 (17:57 +0200)]
net/mlx5e: Send PAOS command on interface up/down
Upon interface up/down, driver will send PAOS (Ports Administrative and
Operational Status Register) in order to inform the Firmware on the
desired status of the port by the driver.
Since now we might change physical link status on mlx5e_open/close,
logical VF representor should not use mlx5e_open/close ndos as is, and
should call the logical version mlx5e_open/closed_locked.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Daniel Borkmann [Sat, 19 Aug 2017 01:12:46 +0000 (03:12 +0200)]
bpf: inline map in map lookup functions for array and htab
Avoid two successive functions calls for the map in map lookup, first
is the bpf_map_lookup_elem() helper call, and second the callback via
map->ops->map_lookup_elem() to get to the map in map implementation.
Implementation inlines array and htab flavor for map in map lookups.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Sat, 19 Aug 2017 01:12:45 +0000 (03:12 +0200)]
bpf: make htab inlining more robust wrt assumptions
Commit 9015d2f59535 ("bpf: inline htab_map_lookup_elem()") was
making the assumption that a direct call emission to the function
__htab_map_lookup_elem() will always work out for JITs.
This is currently true since all JITs we have are for 64 bit archs,
but in case of 32 bit JITs like upcoming arm32, we get a NULL pointer
dereference when executing the call to __htab_map_lookup_elem()
since passed arguments are of a different size (due to pointer args)
than what we do out of BPF. Guard and thus limit this for now for
the current 64 bit JITs only.
Reported-by: Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau [Fri, 18 Aug 2017 18:28:01 +0000 (11:28 -0700)]
bpf: Allow numa selection in INNER_LRU_HASH_PREALLOC test of map_perf_test
This patch makes the needed changes to allow each process of
the INNER_LRU_HASH_PREALLOC test to provide its numa node id
when creating the lru map.
Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau [Fri, 18 Aug 2017 18:28:00 +0000 (11:28 -0700)]
bpf: Allow selecting numa node during map creation
The current map creation API does not allow to provide the numa-node
preference. The memory usually comes from where the map-creation-process
is running. The performance is not ideal if the bpf_prog is known to
always run in a numa node different from the map-creation-process.
One of the use case is sharding on CPU to different LRU maps (i.e.
an array of LRU maps). Here is the test result of map_perf_test on
the INNER_LRU_HASH_PREALLOC test if we force the lru map used by
CPU0 to be allocated from a remote numa node:
[ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ]
># taskset -c 10 ./map_perf_test 512 8 12600008000000
5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec
4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec
3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec
6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec
2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec
1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec
7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec
0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<<
After specifying numa node:
># taskset -c 10 ./map_perf_test 512 8 12600008000000
5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec
3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec
1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec
6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec
2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec
4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec
7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec
0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<<
This patch adds one field, numa_node, to the bpf_attr. Since numa node 0
is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node
field is honored if and only if the BPF_F_NUMA_NODE flag is set.
Numa node selection is not supported for percpu map.
This patch does not change all the kmalloc. F.e.
'htab = kzalloc()' is not changed since the object
is small enough to stay in the cache.
Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 20 Aug 2017 00:13:41 +0000 (17:13 -0700)]
Merge branch 'net-const-eisa_device_id'
Arvind Yadav says:
====================
constify net eisa_device_id
eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arvind Yadav [Sat, 19 Aug 2017 06:53:34 +0000 (12:23 +0530)]
net: defxx: constify eisa_device_id
eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Arvind Yadav [Sat, 19 Aug 2017 06:53:14 +0000 (12:23 +0530)]
net: hp100: constify eisa_device_id
eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arvind Yadav [Sat, 19 Aug 2017 06:52:44 +0000 (12:22 +0530)]
net: de4x5: constify eisa_device_id
eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arvind Yadav [Sat, 19 Aug 2017 06:52:13 +0000 (12:22 +0530)]
net: 3c59x: constify eisa_device_id
eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arvind Yadav [Sat, 19 Aug 2017 06:51:43 +0000 (12:21 +0530)]
net: 3c509: constify eisa_device_id
eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
nfp: add basic ethtool callbacks to representors
This set extends the basic ethtool functionality to representor
netdevs. I start with providing link state via ethtool and then
move on to functions such as driver information, statistics and
FW log dump. The series contains a number of clean ups to the
ethtool stats code too, some of the logic is simplified by making
better use of the nfp_port abstraction. The stats we expose on
representors are only the PCIe and MAC port statistics firmware
maintains for us.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:22 +0000 (15:48 -0700)]
nfp: don't reuse pointers in ring dumping
We were reusing skb pointer when reading page frag, since ring
entries contain a union of a skb and frag pointer. This can
be confusing to people reading the code. Refactor the code
to read frag pointer directly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:21 +0000 (15:48 -0700)]
nfp: fix copy paste in names and messages regarding vNICs
Data and control vNICs currently use the same area name and
error message. This could lead to confusion. Make sure
the error message says "ctrl" in case of control and the
data area is called "nfp.bar0".
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:20 +0000 (15:48 -0700)]
nfp: add ethtool statistics for representors
Representors may be associated with both VFs or more importantly
with physical ports. Allow vNIC and MAC statistics to be read
with ethtool -S on representors. In case of vNICs we reuse
the vNIC statistic helper, we just need to swap RX and TX to
give statistics the "switch perspective."
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:19 +0000 (15:48 -0700)]
nfp: add pointer to vNIC config memory to nfp_port structure
Simplify the statistics handling code by keeping pointer to vNIC's
config memory in nfp_port. Note that this is referring to the
representor side of vNICs, vNIC side has the pointer in nfp_net.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:18 +0000 (15:48 -0700)]
nfp: report MAC statistics in ethtool
Add reporting of MAC statistics in ethtool. MAC statistics
are read out from the MAC IP and accumulated by application
FW, therefore their presence depends on the application FW.
Add missing defines and string names for the statistics and
dump them in ethtool -S.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:17 +0000 (15:48 -0700)]
nfp: store pointer to MAC statistics in nfp_port
Store pointer to device memory containing MAC statistics
in nfp_port. This simplifies representor code and will
be used to dump those statistics in ethtool as well.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:16 +0000 (15:48 -0700)]
nfp: split software and hardware vNIC statistics
In preparation for reporting vNIC HW stats on representors
split handling of the SW and HW stats in ethtool -S.
Representors don't have SW stats (since vNIC is assigned
to the VM).
Remove the questionable defines which assume nn variable
exists in the scope.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:15 +0000 (15:48 -0700)]
nfp: add helper for printing ethtool strings
Add a helper for printing ethtool strings and advancing the
pointer correctly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:14 +0000 (15:48 -0700)]
nfp: don't report standard netdev statistics in ethtool
We have been recently called out as a bad example for reporting
standard netdev statistics as part of ethtool. Fix that :)
Removing standard statistics allows us to simplify the structure
holding definitions since we no longer have to mux different types
of statistics.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:13 +0000 (15:48 -0700)]
nfp: allow retreiving management FW logs on representors
Users should be able to dump the management FW logs on any
of the driver's netdevs. Make the code only depend on the
nfp_app and share it between vNICs and representors.
Storing the dump flag is simply dropped for now, since we
only support the argument being set to 0.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:12 +0000 (15:48 -0700)]
nfp: provide ethtool_drvinfo on representors
Extend representors' ethtool ops to show basic info like firmware
version, driver version, and driver name.
While at it don't set drvinfo.n_stats and drvinfo.regdump_len,
core will invoke appropriate handlers to get those.
A helper is added to turn a netdev into nfp_app for convenience.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 18 Aug 2017 22:48:11 +0000 (15:48 -0700)]
nfp: link basic ethtool ops to representors
Start linking ethtool ops to representors. Begin by adding
a separate ops structure and providing link state. Next
patches will convert appropriate functions to only use nfp_port,
which will make them reusable on representors.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ideally, attribute groups would contain const attributes
but there are too many places that do modifications of list
during startup (in other code) to allow that.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: don't decrement kobj reference count on init failure
If kobject_init_and_add failed, then the failure path would
decrement the reference count of the queue kobject whose reference
count was already zero.
Fixes: 114cf5802165 ("bql: Byte queue limits") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following updates are included in this driver update series:
- Set the MDIO mode to clause 45 for the 10GBase-T configuration
- Set the MII control width to 8-bits for speeds less than 1Gbps
- Fix an issue to related to module removal when the devices are up
- Fix ethtool statistics related to packet counting of TSO packets
- Add support for device renaming
- Add additional dynamic debug output for the PCS window calculation
- Optimize reading of DMA channel interrupt enablement register
- Add additional dynamic debug output about the hardware features
- Add per queue Tx and Rx ethtool statistics
- Add a macro to clear ethtool_link_ksettings modes
- Convert the driver to use the ethtool_link_ksettings
- Add support for VXLAN offload capabilities
- Add additional ethtool statistics related to VXLAN
This patch series is based on net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Fri, 18 Aug 2017 14:04:04 +0000 (09:04 -0500)]
amd-xgbe: Add support for VXLAN offload capabilities
The hardware has the capability to perform checksum offload support
(both Tx and Rx) and TSO support for VXLAN packets. Add the support
required to enable this.
The hardware can only support a single VXLAN port for offload. If more
than one VXLAN port is added then the offload capabilities have to be
disabled and can no longer be advertised.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Fri, 18 Aug 2017 14:03:55 +0000 (09:03 -0500)]
amd-xgbe: Convert to using the new link mode settings
Convert from using the old u32 supported, advertising, etc. link settings
to the new link mode settings that support bit positions / settings
greater than 32 bits.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently whenever the driver needs to enable or disable interrupts for
a DMA channel it reads the interrupt enable register (IER), updates the
value and then writes the new value back to the IER. Since the hardware
does not change the IER, software can track this value and elimiate the
need to read it each time.
Add the IER value to the channel related data structure and use that as
the base for enabling and disabling interrupts, thus removing the need
for the MMIO read.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Fri, 18 Aug 2017 14:02:57 +0000 (09:02 -0500)]
amd-xgbe: Add support to handle device renaming
Many of the names used by the driver are based upon the name of the device
found during device probe. Move the formatting of the names into the
device open function so that any renaming that occurs before the device is
brought up will be accounted for. This also means moving the creation of
some named workqueues into the device open path.
Add support to register for net events so that if a device is renamed
the corresponding debugfs directory can be renamed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Fri, 18 Aug 2017 14:02:49 +0000 (09:02 -0500)]
amd-xgbe: Update TSO packet statistics accuracy
When transmitting a TSO packet, the driver only increments the TSO packet
statistic by one rather than the number of total packets that were sent.
Update the driver to record the total number of packets that resulted from
TSO transmit.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Fri, 18 Aug 2017 14:02:40 +0000 (09:02 -0500)]
amd-xgbe: Be sure driver shuts down cleanly on module removal
Sometimes when the driver is being unloaded while the devices are still
up the driver can issue errors. This is based on timing and the double
invocation of some routines. The phy_exit() call needs to be run after
the network device has been closed and unregistered from the system.
Also, the phy_exit() does not need to invoke phy_stop() since that will
be called as part of the device closing, so remove that call.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Fri, 18 Aug 2017 14:02:27 +0000 (09:02 -0500)]
amd-xgbe: Set the MII control width for the MAC interface
When running in SGMII mode at speeds below 1000Mbps, the auto-negotition
control register must set the MII control width for the MAC interface
to be 8-bits wide. By default the width is 4-bits.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 18 Aug 2017 13:49:25 +0000 (14:49 +0100)]
mlx5: ensure 0 is returned when vport is zero
Currently, if vport is zero then then an uninialized return status
in err is returned. Since the only return status at the end of the
function esw_add_uc_addr is zero for the current set of return paths
we may as well just return 0 rather than err to fix this issue.
Detected by CoverityScan, CID#1452698 ("Uninitialized scalar variable")
Fixes: eeb66cdb6826 ("net/mlx5: Separate between E-Switch and MPFS") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau [Fri, 18 Aug 2017 01:14:43 +0000 (18:14 -0700)]
bpf: Fix map-in-map checking in the verifier
In check_map_func_compatibility(), a 'break' has been accidentally
removed for the BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS
cases. This patch adds it back.
Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Working on streamlining the tracepoints for XDP. The eBPF programs
and XDP have no flow-control or queueing. Investigating using
tracepoint to provide a feedback on XDP_REDIRECT xmit overflow events.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
xdp: adjust xdp redirect tracepoint to include return error code
The return error code need to be included in the tracepoint
xdp:xdp_redirect, else its not possible to distinguish successful or
failed XDP_REDIRECT transmits.
XDP have no queuing mechanism. Thus, it is fairly easily to overrun a
NIC transmit queue. The eBPF program invoking helpers (bpf_redirect
or bpf_redirect_map) to redirect a packet doesn't get any feedback
whether the packet was actually transmitted.
Info on failed transmits in the tracepoint xdp:xdp_redirect, is
interesting as this opens for providing a feedback-loop to the
receiving XDP program.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ixgbe: change ndo_xdp_xmit return code on xmit errors
Use errno -ENOSPC ("No space left on device") when the XDP xmit
have no space left on the TX ring buffer, instead of -ENOMEM.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rick Farrington [Thu, 17 Aug 2017 01:30:13 +0000 (18:30 -0700)]
liquidio: remove support for deprecated f/w cmd OCTNET_CMD_RESET_PF
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently macvlan devices do not set their hw_enc_features making
encapsulated Tx packets resort to SW fallbacks. Add encapsulation GSO
offloads to ->features as is done for the other GSOs and set
->hw_enc_features.
Signed-off-by: Dimitris Michailidis <dmichail@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Fri, 18 Aug 2017 20:07:19 +0000 (13:07 -0700)]
liquidio: fix Smatch error
Fix Smatch error by not dereferencing iq pointer if it's NULL.
See http://marc.info/?l=kernel-janitors&m=150296723301129&w=2
Also, remove unnecessary parentheses.
Fixes: d314ac222829 ("liquidio: moved liquidio_napi_poll to lio_core.c") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 18 Aug 2017 19:08:07 +0000 (12:08 -0700)]
ipv4: convert dst_metrics.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Here's one more bluetooth-next pull request for the 4.14 kernel:
- Multiple fixes for Broadcom controllers
- Fixes to the bluecard HCI driver
- New USB ID for Realtek RTL8723BE controller
- Fix static analyzer warning with kfree
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding a lock around one of the assignments prevents gcc from
tracking the state of the local 'fibmatch' variable, so it can no
longer prove that 'dst' is always initialized, leading to a bogus
warning:
net/ipv6/route.c: In function 'inet6_rtm_getroute':
net/ipv6/route.c:3659:2: error: 'dst' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This moves the other assignment into the same lock to shut up the
warning.
Fixes: 121622dba8da ("ipv6: route: make rtm_getroute not assume rtnl is locked") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Fri, 18 Aug 2017 11:31:39 +0000 (12:31 +0100)]
net: hns3: Fixes the static check warning due to missing unsupp L3 proto check
This patch fixes the static check warning due to missing handling leg of
unsupported L3 protocol type in the hns3_get_l4_protocol() function.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for
hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Fri, 18 Aug 2017 11:31:38 +0000 (12:31 +0100)]
net: hns3: Fixes the static checker error warning in hns3_get_link_ksettings()
This patch fixes the static check error warning in hns3_get_link_ksettings()
function by re-arranging the code.
Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 Driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Fri, 18 Aug 2017 11:31:37 +0000 (12:31 +0100)]
net: hns3: Fixes the missing u64_stats_fetch_begin_irq in 64-bit stats fetch
This patch fixes the missing u64_stats_fetch_begin_irq() while trying to
atomically do 64-bit RX/TX fetch. We did not get any error during test
as our SoC is 64-bit so all of these seq/lock operations results in NOOP.
As such, this seq lock supports has been added for the sake of completion
if this code ever runs on 32-bit platform and we are trying to do 64-bit
stats fetch.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for
hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Mi [Fri, 18 Aug 2017 11:24:20 +0000 (07:24 -0400)]
net/sched: Fix the logic error to decide the ingress qdisc
The offending commit used a newly added helper function.
But the logic is wrong. Without this fix, the affected NICs
can't do HW offload. Error -EOPNOTSUPP will be returned directly.
Fixes: a2e8da9378cc ("net/sched: use newly added classid identity helpers") Signed-off-by: Chris Mi <chrism@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Aug 2017 17:21:31 +0000 (10:21 -0700)]
Merge branch 's390-qeth-next'
Julian Wiedmann says:
====================
s390/net: more updates for 4.14
please apply another batch of qeth patches for net-next.
This reworks the xmit path for L2 OSAs to use skb_cow_head() instead of
skb_realloc_headroom().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Fri, 18 Aug 2017 08:19:10 +0000 (10:19 +0200)]
s390/qeth: use skb_cow_head() for L2 OSA xmit
Taking a full copy via skb_realloc_headroom() on every xmit is overkill
and wastes CPU time; all we actually need is to push on the qeth_hdr.
So rework the L2 OSA TX path to avoid the copy.
Minor complications arise because struct qeth_hdr must not cross a page
boundary. So add a new helper qeth_push_hdr() that catches this, and
falls back to the hdr cache that we already use for IQDs.
This change uncovered that qeth's TX completion takes rather long.
Now that we no longer free the original skb straight away and thus call
skb->destructor later than before, throughput regresses significantly.
For now, restore old behaviour by adding an explicit skb_orphan(),
and a big TODO to improve the TX completion time.
Tested-by: Nils Hoppmann <niho@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Fri, 18 Aug 2017 08:19:08 +0000 (10:19 +0200)]
s390/qeth: pass full IQD header length to fill_buffer()
This is a prerequisite for unifying the code to build header elements.
The TSO header has a different size, so we can no longer rely on implicitly
adding the size of a normal qeth_hdr.
No functional change.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Fri, 18 Aug 2017 08:19:07 +0000 (10:19 +0200)]
s390/qeth: pass TSO data offset to fill_buffer()
For TSO we need to skip the skb's qeth/IP/TCP headers when mapping
it into buffer elements. Instead of (mis)using skb_pull(), pass a
corresponding offset to fill_buffer() like we already do for IQDs.
No actual change in the resulting TSO buffers.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Fri, 18 Aug 2017 08:19:05 +0000 (10:19 +0200)]
s390/qeth: pass full data length to l2_fill_header()
For IQD we already need to fix up the qeth_hdr's length field, and
future changes will require more flexibility for OSA as well. The
device-specific path knows best what header length it requires, so just
pass it from there.
While at it, remove the unused qeth_card parameter.
No functional change.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>