Luca Coelho [Sun, 24 Jun 2018 09:07:28 +0000 (12:07 +0300)]
iwlwifi: add module parameter to disable 802.11ax
Add a module parameter to disable 802.11ax features in supported
devices. This is useful for testing or if there are interoperability
issues with some APs.
Skbprio (SKB Priority Queue) is a queueing discipline that prioritizes packets
according to their skb->priority field. Under congestion, already-enqueued lower
priority packets will be dropped to make space available for higher priority
packets. Skbprio was conceived as a solution for denial-of-service defenses that
need to route packets with different priorities as a means to overcome DoS
attacks.
v5
*Do not reference qdisc_dev(sch)->tx_queue_len for setting limit. Instead set
default sch->limit to 64.
v4
*Drop Documentation/networking/sch_skbprio.txt doc file to move it to tc man
page for Skbprio, in iproute2.
v3
*Drop max_limit parameter in struct skbprio_sched_data and instead use
sch->limit.
*Reference qdisc_dev(sch)->tx_queue_len only once, during initialisation for
qdisc (previously being referenced every time qdisc changes).
*Move qdisc's detailed description from in-code to Documentation/networking.
*When qdisc is saturated, enqueue incoming packet first before dequeueing
lowest priority packet in queue - improves usage of call stack registers.
*Introduce and use overlimit stat to keep track of number of dropped packets.
v2
*Use skb->priority field rather than DS field. Rename queueing discipline as
SKB Priority Queue (previously Gatekeeper Priority Queue).
*Queueing discipline is made classful to expose Skbprio's internal priority
queues.
Signed-off-by: Nishanth Devarajan <ndev2021@gmail.com> Reviewed-by: Sachin Paryani <sachin.paryani@gmail.com> Reviewed-by: Cody Doucette <doucette@bu.edu> Reviewed-by: Michel Machado <michel@digirati.com.br> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Certain PHY's have issues when operating in GBit slave mode and can
be forced to master mode. Examples are RTL8211C, also the Micrel PHY
driver has a DT setting to force master mode.
If two such chips are link partners the autonegotiation will fail.
Standard defines a self-clearing on read, latched-high bit to
indicate this error. Check this bit to inform the user.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jul 2018 21:10:43 +0000 (14:10 -0700)]
Merge branch 'net-whitespace-cleanups'
Stephen Hemminger says:
====================
net whitespace cleanups
Ran script that I use to check for trailing whitespace and
blank lines at end of files across all files in net/ directory.
These are errors that checkpatch reports and git flags.
These are the resulting fixes broken up mostly by subsystem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: remove redundant input checks in SIOCSIFTXQLEN case of dev_ifsioc
The cited patch added a call to dev_change_tx_queue_len in
SIOCSIFTXQLEN case.
This obsoletes the new len comparison check done before the function call.
Remove it here.
For the desicion of keep/remove the negative value check, we examine the
range check in dev_change_tx_queue_len.
On 64-bit we will fail with -ERANGE. The 32-bit int ifr_qlen will be sign
extended to 64-bits when it is passed into dev_change_tx_queue_len(). And
then for negative values this test triggers:
if (new_len != (unsigned int)new_len)
return -ERANGE;
because:
if (0xffffffffWHATEVER != 0x00000000WHATEVER)
On 32-bit the signed value will be accepted, changing behavior.
Therefore, the negative value check is kept.
Fixes: 3f76df198288 ("net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
cxgb4: collect free Tx/Rx pages and page pointers
Patch 1 collects number of free PSTRUCT page pointers in context
memory.
Patch 2 moves the collection logic for Tx/Rx free pages to common
code, since this information needs to be collected in vmcore device
dump as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: move Tx/Rx free pages collection to common code
This information needs to be collected in vmcore device dump as well.
So, move to common code.
Fixes: fa145d5dfd61 ("cxgb4: display number of rx and tx pages free") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: collect number of free PSTRUCT page pointers
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
mlxsw: Add extack messages for tc flower
Nir says:
This patch set adds extack messages support to tc flower part of mlxsw.
The messages provide clear reasoning to failures, as some of the available
actions and keys are not supported in driver or HW and resources may get
exhausted.
The first patch deals with propagation of the extack pointer among the functions
dealing with key parsing and action sets handling.
Following patches 2-4 add appropriate messages across the different layers of
mlxsw tc flower implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jul 2018 17:00:54 +0000 (10:00 -0700)]
Merge tag 'mac80211-next-for-davem-2018-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Only a few things:
* HE (802.11ax) support in HWSIM
* bypass TXQ with NDP frames as they're special
* convert ahash -> shash in lib80211 TKIP
* avoid playing with tailroom counter defer unless
needed to avoid issues in some cases
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in ieee80211_delayed_tailroom_dec(), during roam,
keys of the old AP will be destroyed and new keys will be
installed. Deletion of the old key causes
crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key
installation causes a transition from 0 to 1.
Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1,
we invoke synchronize_net(); the reason for doing this is to avoid
a race in the TX path as explained in increment_tailroom_need_count().
This synchronize_net() operation can be slow and can affect the station
roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt
is delayed for a while so that upon installation of new key the
transition would be from 1 to 2 instead of 0 to 1 and thereby
improving the roam time.
This is all correct for a STA iftype, but deferring the tailroom_needed
decrement for other iftypes may be unnecessary.
For example, let's consider the case of a 4-addr client connecting to
an AP for which AP_VLAN interface is also created, let the initial
value for tailroom_needed on the AP be 1.
* 4-addr client connects to the AP (AP: tailroom_needed = 1)
* AP will clear old keys, delay decrement of tailroom_needed count
* AP_VLAN is created, it takes the tailroom count from master
(AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1)
* Install new key for the station, assume key is plumbed in the HW,
there won't be any change in tailroom_needed count on AP iface
* Delayed decrement of tailroom_needed count on AP
(AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1)
Because of the delayed decrement on AP iface, tailroom_needed count goes
out of sync between AP(master iface) and AP_VLAN(slave iface) and
there would be unnecessary tailroom created for the packets going
through AP_VLAN iface.
Also, WARN_ONs were observed while trying to bring down the AP_VLAN
interface:
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4)
(ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850)
(ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c)
(ieee80211_stop) (__dev_close_many+0x94/0xb8)
(__dev_close_many) (dev_close_many+0x5c/0xc8)
Restricting delayed decrement to station interface alone fixes the problem
and it makes sense to do so because delayed decrement is done to improve
roam time which is applicable only for client devices.
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In preparing to remove all stack VLA usage from the kernel[1], this
removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of
the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash
to direct shash. The stack allocation will be made a fixed size in a
later patch to the crypto subsystem.
David S. Miller [Tue, 24 Jul 2018 04:30:03 +0000 (21:30 -0700)]
Merge tag 'wireless-drivers-next-for-davem-2018-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.19
The first set of patches for 4.19. Only smaller features and bug
fixes, not really anything major. Also included are changes to
include/linux/bitfield.h, we agreed with Johannes that it makes sense
to apply them via wireless-drivers-next.
Major changes:
ath10k
* support channel 173
* fix spectral scan for QCA9984 and QCA9888 chipsets
ath6kl
* add support for Dell Wireless 1537
ti wlcore
* add support for runtime PM
* enable runtime PM autosuspend support
qtnfmac
* support changing MAC address
* enable source MAC address randomization support
libertas
* fix suspend and resume for SDIO cards
mt76
* add software DFS radar pattern detector for mt76x2 based devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jul 2018 04:17:44 +0000 (21:17 -0700)]
Merge branch 'rds-ipv6'
Ka-Cheong Poon says:
====================
rds: IPv6 support
This patch set adds IPv6 support to the kernel RDS and related
modules. Existing RDS apps using IPv4 address continue to run without
any problem. New RDS apps which want to use IPv6 address can do so by
passing the address in struct sockaddr_in6 to bind(), connect() or
sendmsg(). And those apps also need to use the new IPv6 equivalents
of some of the existing socket options as the existing options use a
32 bit integer to store IP address.
All RDS code now use struct in6_addr to store IP address. IPv4
address is stored as an IPv4 mapped address.
Header file changes
There are many data structures (RDS socket options) used by RDS apps
which use a 32 bit integer to store IP address. To support IPv6,
struct in6_addr needs to be used. To ensure backward compatibility, a
new data structure is introduced for each of those data structures
which use a 32 bit integer to represent an IP address. And new socket
options are introduced to use those new structures. This means that
existing apps should work without a problem with the new RDS module.
For apps which want to use IPv6, those new data structures and socket
options can be used. IPv4 mapped address is used to represent IPv4
address in the new data structures.
Internally, all RDS data structures which contain an IP address are
changed to use struct in6_addr to store the address. IPv4 address is
stored as an IPv4 mapped address. All the functions which take an IP
address as argument are also changed to use struct in6_addr.
RDS/RDMA/IB uses a private data (struct rds_ib_connect_private)
exchange between endpoints at RDS connection establishment time to
support RDMA. This private data exchange uses a 32 bit integer to
represent an IP address. This needs to be changed in order to support
IPv6. A new private data struct rds6_ib_connect_private is introduced
to handle this. To ensure backward compatibility, an IPv6 capable RDS
stack uses another RDMA listener port (RDS_CM_PORT) to accept IPv6
connection. And it continues to use the original RDS_PORT for IPv4 RDS
connections. When it needs to communicate with an IPv6 peer, it uses
the RDS_TCP_PORT to send the connection set up request.
RDS/TCP changes
TCP related code is changed to support IPv6. Note that only an IPv6
TCP listener on port RDS_TCP_PORT is created as it can accept both
IPv4 and IPv6 connection requests.
IB/RDMA changes
The initial private data exchange between IB endpoints using RDMA is
changed to support IPv6 address instead, if the peer address is IPv6.
To ensure backward compatibility, annother RDMA listener port
(RDS_CM_PORT) is used to accept IPv6 connection. An IPv6 capable RDS
module continues to use the original RDS_PORT for IPv4 RDS
connections. When it needs to communicate with an IPv6 peer, it uses
the RDS_CM_PORT to send the connection set up request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are many data structures (RDS socket options) used by RDS apps
which use a 32 bit integer to store IP address. To support IPv6,
struct in6_addr needs to be used. To ensure backward compatibility, a
new data structure is introduced for each of those data structures
which use a 32 bit integer to represent an IP address. And new socket
options are introduced to use those new structures. This means that
existing apps should work without a problem with the new RDS module.
For apps which want to use IPv6, those new data structures and socket
options can be used. IPv4 mapped address is used to represent IPv4
address in the new data structures.
v4: Revert changes to SO_RDS_TRANSPORT
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables RDS to use IPv6 addresses. For RDS/TCP, the
listener is now an IPv6 endpoint which accepts both IPv4 and IPv6
connection requests. RDS/RDMA/IB uses a private data (struct
rds_ib_connect_private) exchange between endpoints at RDS connection
establishment time to support RDMA. This private data exchange uses a
32 bit integer to represent an IP address. This needs to be changed in
order to support IPv6. A new private data struct
rds6_ib_connect_private is introduced to handle this. To ensure
backward compatibility, an IPv6 capable RDS stack uses another RDMA
listener port (RDS_CM_PORT) to accept IPv6 connection. And it
continues to use the original RDS_PORT for IPv4 RDS connections. When
it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to
send the connection set up request.
v5: Fixed syntax problem (David Miller).
v4: Changed port history comments in rds.h (Sowmini Varadhan).
v3: Added support to set up IPv4 connection using mapped address
(David Miller).
Added support to set up connection between link local and non-link
addresses.
Various review comments from Santosh Shilimkar and Sowmini Varadhan.
v2: Fixed bound and peer address scope mismatched issue.
Added back rds_connect() IPv6 changes.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
rds: Changing IP address internal representation to struct in6_addr
This patch changes the internal representation of an IP address to use
struct in6_addr. IPv4 address is stored as an IPv4 mapped address.
All the functions which take an IP address as argument are also
changed to use struct in6_addr. But RDS socket layer is not modified
such that it still does not accept IPv6 address from an application.
And RDS layer does not accept nor initiate IPv6 connections.
v2: Fixed sparse warnings.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
sched: introduce chain templates support with offloading to mlxsw
For the TC clsact offload these days, some of HW drivers need
to hold a magic ball. The reason is, with the first inserted rule inside
HW they need to guess what fields will be used for the matching. If
later on this guess proves to be wrong and user adds a filter with a
different field to match, there's a problem. Mlxsw resolves it now with
couple of patterns. Those try to cover as many match fields as possible.
This aproach is far from optimal, both performance-wise and scale-wise.
Also, there is a combination of filters that in certain order won't
succeed.
Most of the time, when user inserts filters in chain, he knows right away
how the filters are going to look like - what type and option will they
have. For example, he knows that he will only insert filters of type
flower matching destination IP address. He can specify a template that
would cover all the filters in the chain.
This patchset is providing the possibility to user to provide such
template to kernel and propagate it all the way down to device
drivers.
See the examples below.
Create dummy device with clsact first:
There is no chain present by by default:
Add chain number 11 by explicit command:
chain parent ffff: chain 11
Add filter to chain number 12 which does not exist. That will create
implicit chain 12:
chain parent ffff: chain 11
chain parent ffff: chain 12
Delete both chains:
Add a chain with template of type flower allowing to insert rules matching
on last 2 bytes of destination mac address:
The chain with template is now showed in the list:
chain parent ffff: flower chain 0
dst_mac 00:00:00:00:00:00/00:00:00:00:ff:ff
eth_type ipv4
Addition of filters that does not fit the template would fail:
Error: cls_flower: Mask does not fit the template.
We have an error talking to the kernel, -1
Error: cls_flower: Mask does not fit the template.
We have an error talking to the kernel, -1
Additions of filters to chain 22:
Error: cls_flower: Mask does not fit the template.
We have an error talking to the kernel, -1
Error: cls_flower: Mask does not fit the template.
We have an error talking to the kernel, -1
---
v3->v4:
- patch 2:
- new patch
- patch 3:
- new patch, derived from the previous v3 chaintemplate obj patch
- patch 4:
- only templates part as chains creation/deletion is now a separate patch
- don't pass template priv as arg of "change" op
- patch 6:
- rebased on top of flower cvlan patch and ip tos/ttl patch
- patch 7:
- templave priv is no longer passed as an arg to "change" op
- patch 11:
- split from the originally single patch
- patch 12:
- split from the originally single patch
v2->v3:
- patch 7:
- rebase on top of the reoffload patchset
- patch 8:
- rebase on top of the reoffload patchset
v1->v2:
- patch 8:
- remove leftover extack arg in fl_hw_create_tmplt()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since cld_flower provides information about the filter template for
specific chain, use this information in order to prepare a region.
Use the template to find out what elements are going to be used
and pass that down to mlxsw_sp_acl_tcam_group_add(). Later on, when the
first filter is inserted, the mlxsw_sp_acl_tcam_group_use_patterns()
function would use this element usage information instead of looking
up a pattern.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: sched: cls_flower: propagate chain teplate creation and destruction to drivers
Introduce a couple of flower offload commands in order to propagate
template creation/destruction events down to device drivers.
Drivers may use this information to prepare HW in an optimal way
for future filter insertions.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Use the previously introduced template extension and implement
callback to create, destroy and dump chain template. The existing
parsing and dumping functions are re-used. Also, check if newly added
filters fit the template if it is set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allow user to set a template for newly created chains. Template lock
down the chain for particular classifier type/options combinations.
The classifier needs to support templates, otherwise kernel would
reply with error.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allow user to create, destroy, get and dump chain objects. Do that by
extending rtnl commands by the chain-specific ones. User will now be
able to explicitly create or destroy chains (so far this was done only
automatically according the filter/act needs and refcounting). Also, the
user will receive notification about any chain creation or destuction.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, chain 0 is implicitly created during block creation. However
that does not align with chain object exposure, creation and destruction
api introduced later on. So make the chain 0 behave the same way as any
other chain and only create it when it is needed. Since chain 0 is
somehow special as the qdiscs need to hold pointer to the first chain
tp, this requires to move the chain head change callback infra to the
block structure.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: ethernet: ti: cpsw: add MQPRIO and CBS Qdisc offload
This series adds MQPRIO and CBS Qdisc offload for TI cpsw driver.
It potentially can be used in audio video bridging (AVB) and time
sensitive networking (TSN).
Patchset was tested on AM572x EVM and BBB boards. Last patch from this
series adds detailed description of configuration with examples. For
consistency reasons, in role of talker and listener, tools from
patchset "TSN: Add qdisc based config interface for CBS" were used and
can be seen here: https://www.spinics.net/lists/netdev/msg460869.html
Based on net-next/master
v5..v4:
- corrected typo of "am57xx" board name, no functional changes
v4..v3:
- nothing, just rebase
v3..v2:
- corrected typo of "shaper" word, no functional changes
v2..v1:
- changed name cpsw.txt on ti-cpsw.txt
- changed name cpsw_set_tc() on cpsw_set_mqprio()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Mon, 23 Jul 2018 21:26:34 +0000 (00:26 +0300)]
Documentation: networking: cpsw: add MQPRIO & CBS offload examples
This document describes MQPRIO and CBS Qdisc offload configuration
for cpsw driver based on examples. It potentially can be used in
audio video bridging (AVB) and time sensitive networking (TSN).
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Mon, 23 Jul 2018 21:26:33 +0000 (00:26 +0300)]
net: ethernet: ti: cpsw: restore shaper configuration while down/up
Need to restore shapers configuration after interface was down/up.
This is needed as appropriate configuration is still replicated in
kernel settings. This only shapers context restore, so vlan
configuration should be restored by user if needed, especially for
devices with one port where vlan frames are sent via ALE.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Mon, 23 Jul 2018 21:26:32 +0000 (00:26 +0300)]
net: ethernet: ti: cpsw: add CBS Qdisc offload
The cpsw has up to 4 FIFOs per port and upper 3 FIFOs can feed rate
limited queue with shaping. In order to set and enable shaping for
those 3 FIFOs queues the network device with CBS qdisc attached is
needed. The CBS configuration is added for dual-emac/single port mode
only, but potentially can be used in switch mode also, based on
switchdev for instance.
Despite the FIFO shapers can work w/o cpdma level shapers the base
usage must be in combine with cpdma level shapers as described in TRM,
that are set as maximum rates for interface queues with sysfs.
One of the possible configuration with txq shapers and CBS shapers:
CBS shaper configuration is supposed to be used with root MQPRIO Qdisc
offload allowing to add sk_prio->tc->txq maps that direct traffic to
appropriate tx queue and maps L2 priority to FIFO shaper.
The CBS shaper is intended to be used for AVB where L2 priority
(pcp field) is used to differentiate class of traffic. So additionally
vlan needs to be created with appropriate egress sk_prio->l2 prio map.
If CBS has several tx queues assigned to it, the sum of their
bandwidth has not overlap bandwidth set for CBS. It's recomended the
CBS bandwidth to be a little bit more.
The CBS shaper is configured with CBS qdisc offload interface using tc
tool from iproute2 packet.
$ tc -g class show dev eth0
+---(100:ffe2) mqprio
| Â Â Â +---(100:3) mqprio
| Â Â Â +---(100:4) mqprio
| Â Â Â
+---(100:ffe1) mqprio
| Â Â Â +---(100:2) mqprio
| Â Â Â
+---(100:ffe0) mqprio
    +---(100:1) mqprio
$ tc qdisc add dev eth0 parent 100:1 cbs locredit -1440 \
hicredit 60 sendslope -960000 idleslope 40000 offload 1
$ tc qdisc add dev eth0 parent 100:2 cbs locredit -1470 \
hicredit 62 sendslope -980000 idleslope 20000 offload 1
The above code set CBS shapers for tc0 and tc1, for that txq0 and
txq1 is used. Pay attention, the real set bandwidth can differ a bit
due to discreteness of configuration parameters.
Here parameters like locredit, hicredit and sendslope are ignored
internally and are supposed to be set with assumption that maximum
frame size for frame - 1500.
It's supposed that interface speed is not changed while reconnection,
not always is true, so inform user in case speed of interface was
changed, as it can impact on dependent shapers configuration.
For more examples see Documentation.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
$ tc -g class show dev eth0
+---(100:ffe2) mqprio
| Â Â Â +---(100:3) mqprio
| Â Â Â +---(100:4) mqprio
| Â Â Â
+---(100:ffe1) mqprio
| Â Â Â +---(100:2) mqprio
| Â Â Â
+---(100:ffe0) mqprio
    +---(100:1) mqprio
Here, 100:1 is txq0, 100:2 is txq1, 100:3 is txq2, 100:4 is txq3
txq0 belongs to tc0, txq1 to tc1, txq2 and txq3 to tc2
The offload part only maps L2 prio to classes of traffic, but not
to transmit queues, so to direct traffic to traffic class vlan has
to be created with appropriate egress map.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Mon, 23 Jul 2018 21:26:30 +0000 (00:26 +0300)]
net: ethernet: ti: cpdma: fit rated channels in backward order
According to TRM tx rated channels should be in 7..0 order,
so correct it.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Mon, 23 Jul 2018 21:26:29 +0000 (00:26 +0300)]
net: ethernet: ti: cpsw: use cpdma channels in backward order for txq
The cpdma channel highest priority is from hi to lo number.
The driver has limited number of descriptors that are shared between
number of cpdma channels. Number of queues can be tuned with ethtool,
that allows to not spend descriptors on not needed cpdma channels.
In AVB usually only 2 tx queues can be enough with rate limitation.
The rate limitation can be used only for hi priority queues. Thus, to
use only 2 queues the 8 has to be created. It's wasteful.
So, in order to allow using only needed number of rate limited
tx queues, save resources, and be able to set rate limitation for
them, let assign tx cpdma channels in backward order to queues.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jul 2018 03:22:33 +0000 (20:22 -0700)]
Merge tag 'mlx5e-updates-2018-07-18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2018-07-18
This series includes update for mlx5e net device driver.
1) From Feras Daoud, Added the support for firmware log tracing,
first by introducing the firmware API needed for the task and then
For each PF do the following:
1- Allocate memory for the tracer strings database and read it from the FW to the SW.
2- Allocate and dma map tracer buffers.
Traces that will be written into the buffer will be parsed as a group
of one or more traces, referred to as trace message. The trace message
represents a C-like printf string.
Once a new trace is available FW will generate an event indicates new trace/s are
available and the driver will parse them and dump them using tracepoints
event tracing
2) From Roi Dayan, Remove redundant WARN when we cannot find neigh entry
3) From Jianbo Liu, TC double vlan support
- Support offloading tc double vlan headers match
- Support offloading double vlan push/pop tc actions
4) From Boris, re-visit UDP GSO, remove the splitting of UDP_GSO_L4 packets
in the driver, and exposes UDP_GSO_L4 as a PARTIAL_GSO feature.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Boris Pismenny [Sat, 30 Jun 2018 19:14:27 +0000 (22:14 +0300)]
net/mlx5e: Use PARTIAL_GSO for UDP segmentation
This patch removes the splitting of UDP_GSO_L4 packets in the driver,
and exposes UDP_GSO_L4 as a PARTIAL_GSO feature. Thus, the network stack
is not responsible for splitting the packet into two.
Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Roi Dayan [Mon, 4 Dec 2017 14:46:30 +0000 (16:46 +0200)]
net/mlx5e: Remove redundant WARN when we cannot find neigh entry
It is possible for neigh entry not to exist if it was cleaned already.
When we bring down an interface the neigh gets deleted but it could be
that our listener for neigh event to clear the encap valid bit didn't
start yet and the neigh update last used work is started first.
In this scenario the encap entry has valid bit set but the neigh entry
doesn't exist.
Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Feras Daoud [Sun, 18 Feb 2018 08:06:35 +0000 (10:06 +0200)]
net/mlx5: FW tracer, parse traces and kernel tracing support
For each message the driver should do the following:
1- Find the message string in the strings database
2- Count the param number of each message
3- Wait for the param events and accumulate them
4- Calculate the event timestamp using the local event timestamp
and the first timestamp event following it.
5- Print message to trace log
Enable the tracing by:
echo 1 > /sys/kernel/debug/tracing/events/mlx5/mlx5_fw/enable
Feras Daoud [Wed, 7 Feb 2018 09:08:56 +0000 (11:08 +0200)]
net/mlx5: FW tracer, events handling
The tracer has one event, event 0x26, with two subtypes:
- Subtype 0: Ownership change
- Subtype 1: Traces available
An ownership change occurs in the following cases:
1- Owner releases his ownership, in this case, an event will be
sent to inform others to reattempt acquire ownership.
2- Ownership was taken by a higher priority tool, in this case
the owner should understand that it lost ownership, and go through
tear down flow.
The second subtype indicates that there are traces in the trace buffer,
in this case, the driver polls the tracer buffer for new traces, parse
them and prepares the messages for printing.
The HW starts tracing from the first address in the tracer buffer.
Driver receives an event notifying that new trace block exists.
HW posts a timestamp event at the last 8B of every 256B block.
Comparing the timestamp to the last handled timestamp would indicate
that this is a new trace block. Once the new timestamp is detected,
the entire block is considered valid.
Block validation and parsing, should be done after copying the current
block to a different location, in order to avoid block overwritten
during processing.
Feras Daoud [Tue, 6 Feb 2018 15:45:57 +0000 (17:45 +0200)]
net/mlx5: FW tracer, create trace buffer and copy strings database
For each PF do the following:
1- Allocate memory for the tracer strings database and read the
strings from the FW to the SW. These strings will be used later for
parsing traces.
2- Allocate and dma map tracer buffers.
Traces that will be written into the buffer will be parsed as a group
of one or more traces, referred to as trace message. The trace message
represents a C-like printf string.
First trace of a message holds the pointer to the correct string in
strings database. The following traces holds the variables of the
message.
Implement FW tracer logic and registers access, initialization and
cleanup flows.
Initializing the tracer will be part of load one flow, as multiple
PFs will try to acquire ownership but only one will succeed and will
be the tracer owner.
====================
lan743x: Add features to lan743x driver
This patch series adds extra features to the lan743x driver.
Updates for v4:
Patch 6/8 - Modified get/set_wol to use super set of
MAC and PHY driver support.
Patch 7/9 - In set_eee, return the return value from phy_ethtool_set_eee.
Updates for v3:
Removed patch 9 from this series, regarding PTP support
Patch 6/8 - Add call to phy_ethtool_get_wol to lan743x_ethtool_get_wol
Patch 7/8 - Add call to phy_ethtool_set_eee on (!eee->eee_enabled)
Updates for v2:
Patch 3/9 - Used ARRAY_SIZE macro in lan743x_ethtool_get_ethtool_stats.
Patch 5/9 - Used MAX_EEPROM_SIZE in lan743x_ethtool_set_eeprom.
Patch 6/9 - Removed unnecessary read of PMT_CTL.
Used CRC algorithm from lib.
Removed PHY interrupt settings from lan743x_pm_suspend
Change "#if CONFIG_PM" to "#ifdef CONFIG_PM"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement ethtool eeprom access
Also provides access to OTP (One Time Programming)
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Mon, 23 Jul 2018 18:15:47 +0000 (21:15 +0300)]
sh_eth: make sh_eth_tsu_{read|write}_entry() prototypes symmetric
sh_eth_tsu_read_entry() is still asymmetric with sh_eth_tsu_write_entry()
WRT their prototypes -- make them symmetric by passing to the former a TSU
register offset instead of its address and also adding the (now necessary)
'ndev' parameter...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Mon, 23 Jul 2018 18:12:38 +0000 (21:12 +0300)]
sh_eth: call sh_eth_tsu_get_offset() from TSU register accessors
With sh_eth_tsu_get_offset() now actually returning TSU register's offset,
we can at last use it in sh_eth_tsu_{read|write}(). Somehow this saves 248
bytes of object code with AArch64 gcc 4.8.5... :-)
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Mon, 23 Jul 2018 18:11:19 +0000 (21:11 +0300)]
sh_eth: make sh_eth_tsu_get_offset() match its name
sh_eth_tsu_get_offset(), despite its name, returns a TSU register's address,
not its offset. Make this function match its name and return a register's
offset from the TSU registers base address instead.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Mon, 23 Jul 2018 18:10:02 +0000 (21:10 +0300)]
sh_eth: uninline sh_eth_tsu_get_offset()
sh_eth_tsu_get_offset() is called several times by the driver, remove
*inline* and move that function from the header to the driver itself
to let gcc decide whether to expand it inline or not...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wan/fsl_ucc_hdlc: use IS_ERR_VALUE() to check return value of qe_muram_alloc
qe_muram_alloc return a unsigned long integer,which should not
compared with zero. check it using IS_ERR_VALUE() to fix this.
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 23 Jul 2018 17:57:14 +0000 (10:57 -0700)]
Merge branch 'smc-next'
Ursula Braun says:
====================
net/smc: patches 2018-07-23
here are some small patches for SMC: Just the first patch contains a
functional change. It allows to differ between the modes SMCR and SMCD
on s390 when monitoring SMC sockets. The remaining patches are cleanups
without functional changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Raspl [Mon, 23 Jul 2018 11:53:10 +0000 (13:53 +0200)]
net/smc: add function to get link group from link
Replace a frequently used construct with a more readable variant,
reducing the code. Also might come handy when we start to support
more than a single per link group.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Raspl [Mon, 23 Jul 2018 11:53:09 +0000 (13:53 +0200)]
net/smc: eliminate cursor read and write calls
The functions to read and write cursors are exclusively used to copy
cursors. Therefore switch to a respective function instead.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rename field diag_fallback into diag_mode and set the smc mode of a
connection explicitly.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 23 Jul 2018 10:33:08 +0000 (12:33 +0200)]
selftests: forwarding: gre_multipath: Drop IPv6 tests
Support for device-only IPv6 multipath next hops was dropped in
commit 33bd5ac54dc4 ("net/ipv6: Revert attempt to simplify route replace
and append") and as of commit b5d2d75e079a ("net/ipv6: Do not allow
device only routes via the multipath API"), attempts to add a next hop
like that yield an explicit diagnostic.
Correspondingly, drop the IPv6 parts of GRE multipath test that are
supposed to test that code.
Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: bridge: add support for backup port
This set introduces a new bridge port option that allows any port to have
any other port (in the same bridge of course) as its backup and traffic
will be forwarded to the backup port when the primary goes down. This is
mainly used in MLAG and EVPN setups where we have peerlink path which is
a backup of many (or even all) ports and is a participating bridge port
itself. There's more detailed information in patch 02. Patch 01 just
prepares the port sysfs code for options that take raw value. The main
issues that this set solves are scalability and fallback latency.
We have used similar code for over 6 months now to bring the fallback
latency of the backup peerlink down and avoid fdb notification storms.
Also due to the nature of master devices such setup is currently not
possible, and last but not least having tens of thousands of fdbs require
thousands of calls to switch.
I've also CCed our MLAG experts that have been using similar option.
Roopa also adds:
"Two switches acting in a MLAG pair are connected by the peerlink
interface which is a bridge port.
the config on one of the switches looks like the below. The other
switch also has a similar config.
eth0 is connected to one port on the server. And the server is
connected to both switches.
br0 -- team0---eth0
|
-- switch-peerlink
switch-peerlink becomes the failover/backport port when say team0 to
the server goes down.
Today, when team0 goes down, control plane has to withdraw all the fdb
entries pointing to team0
and re-install the fdb entries pointing to switch-peerlink...and
restore the fdb entries when team0 comes back up again.
and this is the problem we are trying to solve.
This also becomes necessary when multihoming is implemented by a
standard like E-VPN https://tools.ietf.org/html/rfc8365#section-8
where the 'switch-peerlink' is an overlay vxlan port (like nikolay
mentions in his patch commit). In these implementations, the fdb scale
can be much larger.
On why bond failover cannot be used here ?: the point that nikolay was
alluding to is, switch-peerlink in the above example is a bridge port
and is a failover/backport port for more than one or all ports in the
bridge br0. And you cannot enslave switch-peerlink into a second level
team
with other bridge ports. Hence a multi layered team device is not an
option (FWIW, switch-peerlink is also a teamed interface to the peer
switch)."
v3: Added Roopa's explanation and diagram
v2: In patch 01 use kstrdup/kfree to avoid casting the const buf. In order
to avoid using GFP_ATOMIC or always allocating I kept the spinlock inside
each branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>