Junio C Hamano [Sun, 18 Nov 2007 23:50:16 +0000 (15:50 -0800)]
Merge branch 'ph/diffopts'
* ph/diffopts:
Reorder diff_opt_parse options more logically per topics.
Make the diff_options bitfields be an unsigned with explicit masks.
Use OPT_BIT in builtin-pack-refs
Use OPT_BIT in builtin-for-each-ref
Use OPT_SET_INT and OPT_BIT in builtin-branch
parse-options new features.
Guido Ostkamp [Fri, 16 Nov 2007 18:59:58 +0000 (19:59 +0100)]
Use compat mkdtemp() on Solaris boxes
Define NO_MKDTEMP for all variants of SunOS; Solaris 10 does not
have mkdtemp() and all the other versions our Makefile knows
about don't have it either.
NO_{SETENV,UNSETENV,C99_FORMAT,STRTOUMAX} definitions cannot be
unified across versions. Beginning with Solaris 10, the C-library
provides unsetenv(), setenv() and strtoumax(). Also 'z'/'t' formats
are supported. However, older versions of Solaris do not support
these.
Signed-off-by: Guido Ostkamp <git@ostkamp.fastmail.fm> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 18 Nov 2007 05:39:37 +0000 (21:39 -0800)]
Merge branch 'ph/parseopt-sh'
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
Junio C Hamano [Sun, 18 Nov 2007 05:18:14 +0000 (21:18 -0800)]
grep -An -Bm: fix invocation of external grep command
When building command line to invoke external grep, the
arguments to -A/-B/-C options were placd in randarg[] buffer,
but the code forgot that snprintf() does not count terminating
NUL in its return value. This caused "git grep -A1 -B2" to
invoke external grep with "-B21 -A1".
Junio C Hamano [Sun, 18 Nov 2007 00:40:03 +0000 (16:40 -0800)]
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
git-svn: Fix a typo and add a comma in an error message in git-svn
git-svn log: handle unreachable revisions like "svn log"
git-svn log: include commit log for the smallest revision in a range
git-svn log: fix ascending revision ranges
git-svn's dcommit must use subversion's config
git-svn: add tests for command-line usage of init and clone commands
David D Kilzer [Mon, 12 Nov 2007 06:56:52 +0000 (22:56 -0800)]
git-svn log: handle unreachable revisions like "svn log"
When unreachable revisions are given to "svn log", it displays all commit
logs in the given range that exist in the current tree. (If no commit
logs are found in the current tree, it simply prints a single commit log
separator.) This patch makes "git-svn log" behave the same way.
Ten tests added to t/t9116-git-svn-log.sh.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net> Acked-by: Eric Wong <normalperson@yhbt.net>
David D Kilzer [Sun, 11 Nov 2007 06:10:34 +0000 (22:10 -0800)]
git-svn log: include commit log for the smallest revision in a range
The "svn log -rM:N" command shows commit logs inclusive in the range [M,N].
Previously "git-svn log" always excluded the commit log for the smallest
revision in a range, whether the range was ascending or descending. With
this patch, the smallest revision in a range is always shown.
Updated tests for ascending and descending revision ranges.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net> Acked-by: Eric Wong <normalperson@yhbt.net>
When doing dcommit git-svn must use subversion's config or newly created
files will not include svn's properties
(defined in [auto-props] with 'enable-auto-props = yes').
Signed-off-by: Konstantin V. Arkhipov <voxus@onphp.org> Acked-by: Eric Wong <normalperson@yhbt.net>
Mike Hommey [Fri, 16 Nov 2007 22:02:08 +0000 (23:02 +0100)]
Fix and improve t7004 (git-tag tests)
Brown paper bag fix to avoid using non portable sed syntax. The
test by itself didn't catch what it was supposed to, anyways.
The new test first checks if git-tag correctly errors out when
the user exited the editor without editing the file. Then it
checks if what the user was presented in the editor was any
useful, which we define as the following:
* It begins with a single blank line, where the invoked editor
would typically place the editing curser at, so that the user
can immediately start typing;
* It has some instruction but that comes after that initial
blank line, all lines prefixed with "#". We specifically do
not check for the wording of this instruction.
* And it has nothing else, as the expected behaviour is "Hey
you did not leave any message".
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 16 Nov 2007 09:15:41 +0000 (01:15 -0800)]
Fix per-directory exclude handing for "git add"
In "dir_struct", each exclusion element in the exclusion stack records a
base string (pointer to the beginning with length) so that we can tell
where it came from, but this pointer is just pointing at the parameter
that is given by the caller to the push_exclude_per_directory()
function.
While read_directory_recursive() runs, calls to excluded() makes use
the data in the exclusion elements, including this base string. The
caller of read_directory_recursive() is not supposed to free the
buffer it gave to push_exclude_per_directory() earlier, until it
returns.
The test case Bruce Stephens gave in the mailing list discussion
was simplified and added to the t3700 test.
Junio C Hamano [Sat, 17 Nov 2007 01:05:02 +0000 (17:05 -0800)]
core.excludesfile clean-up
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Wincent Colaiuta [Fri, 16 Nov 2007 13:25:10 +0000 (14:25 +0100)]
Fix t9101 test failure caused by Subversion "auto-props"
If a user has an "auto-prop" in his/her ~/.subversion/config file for
automatically setting the svn:keyword Id property on all ".c" files
(a reasonably common configuration in the Subversion world) then one
of the "svn propset" operations in the very first test would become a
no-op, which in turn would make the next commit a no-op.
This then caused the 25th test ('test propget') to fail because it
expects a certain number of commits to have taken place but the actual
number of commits was off by one.
Björn Steinbrink identified the "auto-prop" feature as the cause
of the failure. This patch avoids it by passing the "--no-auto-prop"
flag to "svn import" when setting up the test repository, thus ensuring
that the "svn propset" operation is no longer a no-op, regardless of the
users' settings in their config.
Signed-off-by: Wincent Colaiuta <win@wincent.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 16 Nov 2007 10:49:09 +0000 (05:49 -0500)]
git-send-email: add charset header if we add encoded 'From'
We sometimes pick out the original rfc822 'From' header and
include it in the body of the message. If the original
author's name needs encoding, then we should specify that in
the content-type header.
If we already had a content-type header in the mail, then we
may need to re-encode. The logic is there to detect
this case, but it doesn't actually do the re-encoding.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 16 Nov 2007 09:15:41 +0000 (01:15 -0800)]
Fix per-directory exclude handing for "git add"
In "dir_struct", each exclusion element in the exclusion stack records a
base string (pointer to the beginning with length) so that we can tell
where it came from, but this pointer is just pointing at the parameter
that is given by the caller to the push_exclude_per_directory()
function.
While read_directory_recursive() runs, calls to excluded() makes use
the data in the exclusion elements, including this base string. The
caller of read_directory_recursive() is not supposed to free the
buffer it gave to push_exclude_per_directory() earlier, until it
returns.
The test case Bruce Stephens gave in the mailing list discussion
was simplified and added to the t3700 test.
Junio C Hamano [Wed, 14 Nov 2007 08:05:00 +0000 (00:05 -0800)]
core.excludesfile clean-up
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Junio C Hamano [Wed, 14 Nov 2007 22:26:04 +0000 (14:26 -0800)]
Merge branch 'sp/fetch-fix'
* sp/fetch-fix:
git-fetch: avoid local fetching from alternate (again)
rev-list: Introduce --quiet to avoid /dev/null redirects
run-command: Support sending stderr to /dev/null
git-fetch: Always fetch tags if the object they reference exists
Junio C Hamano [Wed, 14 Nov 2007 22:25:46 +0000 (14:25 -0800)]
Merge branch 'bs/maint-commit-options'
* bs/maint-commit-options:
git-commit: Add tests for invalid usage of -a/--interactive with paths
git-commit.sh: Fix usage checks regarding paths given when they do not make sense
Junio C Hamano [Wed, 14 Nov 2007 22:15:40 +0000 (14:15 -0800)]
Merge branch 'jc/maint-add-sync-stat'
* jc/maint-add-sync-stat:
t2200: test more cases of "add -u"
git-add: make the entry stat-clean after re-adding the same contents
ce_match_stat, run_diff_files: use symbolic constants for readability
Junio C Hamano [Wed, 14 Nov 2007 22:05:47 +0000 (14:05 -0800)]
Merge branch 'jc/stash-create'
* jc/stash-create:
git-stash: Fix listing stashes
git-merge: no reason to use cpio anymore
Revert "rebase: allow starting from a dirty tree."
rebase: allow starting from a dirty tree.
stash: implement "stash create"
Junio C Hamano [Wed, 14 Nov 2007 22:04:25 +0000 (14:04 -0800)]
Merge branch 'bg/format-patch-N'
* bg/format-patch-N:
Rearrange git-format-patch synopsis to improve clarity.
format-patch: Test --[no-]numbered and format.numbered
format-patch: Add configuration and off switch for --numbered
Junio C Hamano [Wed, 14 Nov 2007 22:04:19 +0000 (14:04 -0800)]
Merge branch 'np/progress'
* np/progress:
nicer display of thin pack completion
make display of total transferred fully accurate
remove dead code from the csum-file interface
git-fetch: be even quieter.
make display of total transferred more accurate
sideband.c: ESC is spelled '\033' not '\e' for portability.
fix display overlap between remote and local progress
Junio C Hamano [Wed, 14 Nov 2007 11:37:18 +0000 (03:37 -0800)]
Merge branch 'maint'
* maint:
git-clean: honor core.excludesfile
Documentation: Fix man page breakage with DocBook XSL v1.72
git-remote.txt: fix typo
core-tutorial.txt: Fix argument mistake in an example.
replace reference to git-rm with git-reset in git-commit doc
Grammar fixes for gitattributes documentation
Don't allow fast-import tree delta chains to exceed maximum depth
revert/cherry-pick: allow starting from dirty work tree.
t/t3404: fix test for a bogus todo file.
Junio C Hamano [Wed, 14 Nov 2007 09:54:43 +0000 (01:54 -0800)]
git-clean: honor core.excludesfile
git-clean did not honor core.excludesfile configuration
variable, although some other commands such as git-add and
git-status did. Fix this inconsistency.
Original report and patch from Shun'ichi Fuji. Rewritten by me
and bugs and tests are mine.
Jonas Fonseca [Wed, 14 Nov 2007 09:38:46 +0000 (10:38 +0100)]
Documentation: Fix man page breakage with DocBook XSL v1.72
From version 1.72 it will replace all dots in roff requests with U+2302
("house" character), and add escaping in output for all instances of dot
that are not in roff requests. This caused the ".ft" hack forcing
monospace font in listingblocks to end up as "\&.ft" and being visible
in the resulting man page.
The fix adds a DOCBOOK_XSL_172 build variable that will disable the
hack. To allow this variable to be defined in config.mak it also moves
build variable handling below the inclusion of config.mak.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Tue, 13 Nov 2007 08:22:44 +0000 (03:22 -0500)]
Handle broken vsnprintf implementations in strbuf
Solaris 9's vsnprintf implementation returns -1 if we pass it a
buffer of length 0. The only way to get it to give us the actual
length necessary for the formatted string is to grow the buffer
out to have at least 1 byte available in the strbuf and then ask
it to compute the length.
If the available space is 0 I'm growing it out by 64 to ensure
we will get an accurate length estimate from all implementations.
Some callers may need to grow the strbuf again but 64 should be a
reasonable enough initial growth.
We also no longer silently fail to append to the string when we are
faced with a broken vsnprintf implementation. On Solaris 9 this
silent failure caused me to no longer be able to execute "git clone"
as we tried to exec the empty string rather than "git-clone".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wincent Colaiuta [Wed, 14 Nov 2007 07:51:41 +0000 (08:51 +0100)]
Grammar fixes for gitattributes documentation
Tweak the "filter" section of the gitattributes documentation to add
some
missing articles and improve some word choices without changing the
semantics of the section.
Signed-off-by: Wincent Colaiuta <win@wincent.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Wed, 14 Nov 2007 04:48:42 +0000 (23:48 -0500)]
Don't allow fast-import tree delta chains to exceed maximum depth
Brian Downing noticed fast-import can produce tree depths of up
to 6,035 objects and even deeper. Long delta chains can create
very small packfiles but cause problems during repacking as git
needs to unpack each tree to count the reachable blobs.
What's happening here is the active branch cache isn't big enough.
We're swapping out the branch and thus recycling the tree information
(struct tree_content) back into the free pool. When we later reload
the tree we set the delta_depth to 0 but we kept the tree we just
reloaded as a delta base.
So if the tree we reloaded was already at the maximum depth we
wouldn't know it and make the new tree a delta. Multiply the
number of times the branch cache has to swap out the tree times
max_depth (10) and you get the maximum delta depth of a tree created
by fast-import. In Brian's case above the active branch cache had
to swap the branch out 603/604 times during this import to produce
a tree with a delta depth of 6035.
Acked-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 13 Nov 2007 21:45:11 +0000 (13:45 -0800)]
Resurrect git-revert.sh example and add comment to builtin-revert.c
I had to scratch my head for quite some time figuring out why we
cannot optimize out write_tree() we do when --no-commit option
is given, whose purpose seem to be only to check if the index is
unmerged, with a simple loop over the active_cache[].
So add a comment to describe why the write_tree() is there, and
resurrect the last scripted version as a reference material in
contrib/example directory with others.
Junio C Hamano [Tue, 13 Nov 2007 20:28:53 +0000 (12:28 -0800)]
revert/cherry-pick: allow starting from dirty work tree.
There is no reason to forbid a dirty work tree when reverting or
cherry-picking a change, as long as the index is clean.
The scripted version used to allow it:
case "$no_commit" in
t)
# We do not intend to commit immediately. We just want to
# merge the differences in.
head=$(git-write-tree) ||
die "Your index file is unmerged."
;;
*)
head=$(git-rev-parse --verify HEAD) ||
die "You do not have a valid HEAD"
files=$(git-diff-index --cached --name-only $head) || exit
if [ "$files" ]; then
die "Dirty index: cannot $me (dirty: $files)"
fi
;;
esac
but C rewrite tightened the check, probably by mistake.
Andy Whitcroft [Mon, 12 Nov 2007 12:07:40 +0000 (12:07 +0000)]
git-quiltimport.sh fix --patches handling
When converting git-quiltimport.sh to the new git-rev-part --parseopt
system, the handling of --patches was broken. We inadvertantly always
attempt to use '--patches' as the value.
Johannes Sixt [Mon, 12 Nov 2007 10:09:05 +0000 (11:09 +0100)]
Fix preprocessor logic that determines the availablity of strchrnul().
Apart from the error in the condition (&& should actually be ||), the
construct
#if !defined(A) || !A
leads to a syntax error in the C preprocessor if A is indeed not defined.
Tested-by: David Symonds <dsymonds@gmail.com> Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Mon, 12 Nov 2007 08:27:35 +0000 (09:27 +0100)]
git-clean: Fix error message if clean.requireForce is not set.
It was distracting to see this error message:
clean.requireForce set and -n or -f not given; refusing to clean
even though clean.requireForce was not set at all. This patch distinguishes
the cases and gives a different message depending on whether the
configuration variable is not set or set to true.
While we are here, we also divert the error messages to stderr.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Mon, 12 Nov 2007 07:37:42 +0000 (23:37 -0800)]
git-svn: support for funky branch and project names over HTTP(S)
SVN requires that paths be URI-escaped for HTTP(S) repositories.
file:// and svn:// repositories do not need these rules.
Additionally, accessing individual paths inside repositories
(check_path() and get_log() do NOT require escapes to function
and in fact it breaks things).
Noticed-by: Michael J. Cohen <mjc@cruiseplanners.com> Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 12 Nov 2007 08:14:15 +0000 (00:14 -0800)]
Merge branch 'maint'
* maint:
for-each-ref: fix off by one read.
git-branch: remove mention of non-existent '-b' option
git-svn: prevent dcommitting if the index is dirty.
Fix memory leak in traverse_commit_list
Benoit Sigoure [Sun, 11 Nov 2007 18:41:41 +0000 (19:41 +0100)]
git-svn: prevent dcommitting if the index is dirty.
dcommit uses rebase to sync the history with what has just been pushed to
SVN. Trying to dcommit with a dirty index is troublesome for rebase, so now
the user will get an error message if he attempts to dcommit with a dirty
index.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Sun, 11 Nov 2007 07:29:47 +0000 (02:29 -0500)]
git-fetch: avoid local fetching from alternate (again)
Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught
git-fetch to avoid copying objects when we are fetching from
a repository that is already registered as an alternate object
database. In such a case there is no reason to copy any objects
as we can already obtain them through the alternate.
However we need to ensure the objects are all reachable, so we
run `git rev-list --objects $theirs --not --all` to verify this.
If any object is missing or unreadable then we need to fetch/copy
the objects from the remote. When a missing object is detected
the git-rev-list process will exit with a non-zero exit status,
making this condition quite easy to detect.
Although git-fetch is currently a builtin (and so is rev-list)
we cannot invoke the traverse_objects() API at this point in the
transport code. The object walker within traverse_objects() calls
die() as soon as it finds an object it cannot read. If that happens
we want to resume the fetch process by calling do_fetch_pack().
To get around this we spawn git-rev-list into a background process
to prevent a die() from killing the foreground fetch process,
thus allowing the fetch process to resume into do_fetch_pack()
if copying is necessary.
We aren't interested in the output of rev-list (a list of SHA-1
object names that are reachable) or its errors (a "spurious" error
about an object not being found as we need to copy it) so we redirect
both stdout and stderr to /dev/null.
We run this git-rev-list based check before any fetch as we may
already have the necessary objects local from a prior fetch. If we
don't then its very likely the first $theirs object listed on the
command line won't exist locally and git-rev-list will die very
quickly, allowing us to start the network transfer. This test even
on remote URLs may save bandwidth if someone runs `git pull origin`,
sees a merge conflict, resets out, then redoes the same pull just
a short time later. If the remote hasn't changed between the two
pulls and the local repository hasn't had git-gc run in it then
there is probably no need to perform network transfer as all of
the objects are local.
Documentation for the new quickfetch function was suggested and
written by Junio, based on his original comment in git-fetch.sh.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 11 Nov 2007 07:29:41 +0000 (02:29 -0500)]
rev-list: Introduce --quiet to avoid /dev/null redirects
Some uses of git-rev-list are to run it with --objects to see if
a range of objects between two or more commits is fully connected
or not. In such a case the caller doesn't care about the actual
object names or hash hints so formatting this data only for it to
be dumped to /dev/null by a redirect is a waste of CPU time. If
all the caller needs is the exit status then --quiet can be used
to bypass the commit and object formatting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 11 Nov 2007 07:29:37 +0000 (02:29 -0500)]
run-command: Support sending stderr to /dev/null
Some callers may wish to redirect stderr to /dev/null in some
contexts, such as if they are executing a command only to get
the exit status and don't want users to see whatever output it
may produce as a side-effect of computing that exit status.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 11 Nov 2007 07:29:30 +0000 (02:29 -0500)]
git-fetch: Always fetch tags if the object they reference exists
Previously git-fetch.sh used `git cat-file -t` to determine if an
object referenced by a tag exists, and if so fetch that tag locally.
This was subtly broken during the port to C based builtin-fetch as
lookup_object() only works to locate an object if it was previously
accessed by the transport. Not all transports will access all
objects in this way, so tags were not always being fetched.
The rsync transport never loads objects into the internal object
table so automated tag following didn't work if rsync was used.
Automated tag following also didn't work on the native transport
if the new tag was behind the common point(s) negotiated between
the two ends of the connection as the tag's referrant would not
be loaded into the internal object table. Further the automated
tag following was broken with the HTTP commit walker if the new
tag's referrant was behind an existing ref, as the walker would
stop before loading the tag's referrant into the object table.
Switching to has_sha1_file() restores the original behavior from
the shell script by checking if the object exists in the ODB,
without relying on the state left behind by a transport.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Pierre Habouzit [Wed, 7 Nov 2007 10:20:27 +0000 (11:20 +0100)]
parse-options new features.
options flags:
~~~~~~~~~~~~~
PARSE_OPT_NONEG allow the caller to disallow the negated option to exists.
option types:
~~~~~~~~~~~~
OPTION_BIT: ORs (or NANDs) a mask.
OPTION_SET_INT: force the value to be set to this integer.
OPTION_SET_PTR: force the value to be set to this pointer.
helper:
~~~~~~
HAS_MULTI_BITS (in git-compat-util.h) is a bit-hack to check if an
unsigned integer has more than one bit set, useful to check if conflicting
options have been used.
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Björn Steinbrink [Sun, 11 Nov 2007 17:38:11 +0000 (18:38 +0100)]
t7005-editor.sh: Don't invoke real vi when it is in GIT_EXEC_PATH
The git wrapper executable always prepends the GIT_EXEC_PATH build
variable to the current PATH, so prepending "." to the PATH is not
enough to give precedence to the fake vi executable.
The --exec-path option allows to prepend a directory to PATH even before
GIT_EXEC_PATH (which is added anyway), so we can use that instead.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 11 Nov 2007 23:00:05 +0000 (15:00 -0800)]
Merge branch 'maint'
* maint:
fix index-pack with packs >4GB containing deltas on 32-bit machines
git-hash-object should honor config variables
gitweb: correct month in date display for atom feeds
Andreas Ericsson [Sat, 10 Nov 2007 11:55:48 +0000 (12:55 +0100)]
Simplify strchrnul() compat code
strchrnul() was introduced in glibc in April 1999 and included in
glibc-2.1. Checking for that version means the majority of all git
users would get to use the optimized version in glibc. Of the
remaining few some might get to use a slightly slower version
than necessary but probably not slower than what we have today.
Unfortunately, __GLIBC_PREREQ() macro was not available in glibc 2.1.1
which was short lived but already supported strchrnul(). Odd minority
users of that library needs to live with our compatibility inline version.
Rediffed-against-next-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Sun, 11 Nov 2007 04:29:10 +0000 (23:29 -0500)]
fix index-pack with packs >4GB containing deltas on 32-bit machines
This probably hasn't been properly tested before. Here's a script to
create a 8GB repo with the necessary characteristics (copy the
test-genrandom executable from the Git build tree to /tmp first):
-----
#!/bin/bash
git init
git config core.compression 0
# create big objects with no deltas
for i in $(seq -w 1 2 63)
do
echo $i
/tmp/test-genrandom $i 268435456 > file_$i
git add file_$i
rm file_$i
echo "file_$i -delta" >> .gitattributes
done
# create "deltifiable" objects in between big objects
for i in $(seq -w 2 2 64)
do
echo "$i $i $i" >> grow
cp grow file_$i
git add file_$i
rm file_$i
done
rm grow
# create a pack with them
git commit -q -m "commit of big objects interlaced with small deltas"
git repack -a -d
-----
Then clone this repo over the Git protocol.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Jeff King remarked, format strings with duplicate placeholders can
be slow to expand, because each instance is calculated anew.
This patch makes use of the fact that format_commit_message() and its
helper functions only ever add stuff to the end of the strbuf. For
certain expensive placeholders, store the offset and length of their
expansion with the strbuf at the first occurrence. Later they
expansion result can simply be copied from there -- no malloc() or
strdup() required.
These certain placeholders are the abbreviated commit, tree and
parent hashes, as the search for a unique abbreviated hash is quite
costly. Here are the times for next (best of three runs):
$ time git log --pretty=format:%h >/dev/null
real 0m0.611s
user 0m0.404s
sys 0m0.204s
$ time git log --pretty=format:%h%h%h%h >/dev/null
real 0m1.206s
user 0m0.744s
sys 0m0.452s
And here those with this patch (and the previous two); the speedup
of the single placeholder case is just noise:
$ time git log --pretty=format:%h >/dev/null
real 0m0.608s
user 0m0.416s
sys 0m0.192s
$ time git log --pretty=format:%h%h%h%h >/dev/null
real 0m0.639s
user 0m0.488s
sys 0m0.140s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 10 Nov 2007 11:14:20 +0000 (12:14 +0100)]
--pretty=format: parse commit message only once
As Jeff King pointed out, some placeholder expansions are related to
each other: the steps to calculate one go most of the way towards
calculating the other, too.
This patch makes format_commit_message() parse the commit message
only once, remembering the position of each item. This speeds up
handling of format strings containing multiple placeholders from the
set %s, %a*, %c*, %e, %b.
Here are the timings for the git version in next. The first one is
to estimate the overhead of the caching, the second one is taken
from http://svn.tue.mpg.de/tentakel/trunk/tentakel/Makefile as an
example of a format string found in the wild. The times are the
fastest of three consecutive runs in each case:
$ time git log --pretty=format:%e >/dev/null
real 0m0.381s
user 0m0.340s
sys 0m0.024s
$ time git log --pretty=format:"* %cd %cn%n%n%s%n%b" >/dev/null
real 0m0.623s
user 0m0.556s
sys 0m0.052s
And here the times with this patch:
$ time git log --pretty=format:%e >/dev/null
real 0m0.385s
user 0m0.332s
sys 0m0.040s
$ time git log --pretty=format:"* %cd %cn%n%n%s%n%b" >/dev/null
real 0m0.563s
user 0m0.504s
sys 0m0.048s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michele Ballabio [Sat, 10 Nov 2007 14:17:25 +0000 (15:17 +0100)]
test-lib.sh: move error line after error() declaration
This patch removes a spurious "command not found" error
and actually makes the "Test script did not set test_description."
string follow the command line option "--no-color".
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>