iwlwifi: allow masking out memory areas from the fw dump
Reading and dumping memory areas takes time, and sometimes
dumping all of the areas isn't necessary.
Allow choosing the memory areas which should be dumped.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Golan Ben Ami [Mon, 5 Feb 2018 10:01:36 +0000 (12:01 +0200)]
iwlwifi: pcie: support rx structures for 22560 devices
The rfh for 22560 devices has changed so it supports now
the same arch of using used and free lists, but different
structures to support the last.
Use the new structures, hw dependent, to manage the lists.
bd, the free list, uses the iwl_rx_transfer_desc,
in which the vid is stored in the structs' rbid
field, and the page address in the addr field.
used_bd, the used list, uses the iwl_rx_completion_desc
struct, in which the vid is stored in the structs' rbid
field.
rb_stts, the hw "write" pointer of rx is stored in a
__le16 array, in which each entry represents the write
pointer per queue.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Only rt2800 subdriver of rt2x00 implement sta_add() and sta_remove(),
rt2x00mac_sta_add and rt2x00mac_sta_remove has no callers after
commit 9c87758cf089 ("rt2x00: call sta_add/remove directly in rt2800").
So can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Jia-Ju Bai [Fri, 27 Jul 2018 08:50:45 +0000 (16:50 +0800)]
rtl818x: Replace mdelay() with msleep() in rtl8225se_rf_init
rtl8225se_rf_init() is never called in atomic context.
It calls mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().
This patch only replaces the mdelay() that has >20ms time to wait.
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Jia-Ju Bai [Fri, 27 Jul 2018 08:45:35 +0000 (16:45 +0800)]
atmel: Replace mdelay() with msleep() in probe_atmel_card()
probe_atmel_card() is never called in atomic context.
It calls mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)
This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
brcmfmac: specify some features per firmware version
Some features supported by firmware aren't advertised and there is no
way for a driver to query them. This includes e.g. monitor mode details.
Most firmwares support monitor interface but only the latest ones
/announce/ it with a "monitor" flag in the "cap" iovar. There isn't any
reliable detection method for older firmwares (BRCMF_C_MONITOR was tried
but "it only indicates the core part of the stack supports").
Similarly support for tagging monitor frames and building radiotap
headers can't be reliably detected for all firmwares.
This commit adds table that allows mapping features to firmware version.
It adds mappings for 43602a1 and 4366b1 firmwares from
linux-firmware.git. Both were confirmed to be passing monitor frames.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
drivers/net/wireless/intersil/hostap/hostap_hw.c:2901:12: warning: ‘prism2_registers_proc_show’ defined but not used [-Wunused-function]
static int prism2_registers_proc_show(struct seq_file *m, void *v)
drivers/net/wireless/intersil/hostap/hostap_proc.c:16:12: warning: ‘prism2_debug_proc_show’ defined but not used [-Wunused-function]
static int prism2_debug_proc_show(struct seq_file *m, void *v)
^
drivers/net/wireless/intersil/hostap/hostap_proc.c:49:12: warning: ‘prism2_stats_proc_show’ defined but not used [-Wunused-function]
static int prism2_stats_proc_show(struct seq_file *m, void *v)
^
drivers/net/wireless/intersil/hostap/hostap_proc.c:177:12: warning: ‘prism2_crypt_proc_show’ defined but not used [-Wunused-function]
static int prism2_crypt_proc_show(struct seq_file *m, void *v)
^
fix this by adding #ifdef around them.
hfa384x_read_reg is only used by prism2_registers_proc_show,so move it
into #ifdef.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
drivers/net/wireless/atmel/atmel.c:1402:12: warning: ‘atmel_proc_show’ defined but not used [-Wunused-function]
static int atmel_proc_show(struct seq_file *m, void *v)
^
fix this by adding #ifdef around it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Fri, 20 Jul 2018 18:07:40 +0000 (19:07 +0100)]
ray_cs: remove redundant pointer 'p'
Pointer 'p' is being assigned but is never used hence it is
redundant and can be removed. Also re-work if statement to remove
redundant assignment of p.
Cleans up clang warning:
warning: variable 'p' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Wed, 11 Jul 2018 07:42:53 +0000 (08:42 +0100)]
iwlegacy: remove several redundant variables
Variables id, unicast, write, conf, a_band, accum_tx and ucode are
assigned a value but it is never read, hence they are redundant and
can be removed.
Cleans up clang warnings:
warning: variable 'id' set but not used [-Wunused-but-set-variable]
warning: variable 'unicast' set but not used [-Wunused-but-set-variable]
warning: variable 'write' set but not used [-Wunused-but-set-variable]
warning: variable 'conf' set but not used [-Wunused-but-set-variable]
warning: variable 'a_band' set but not used [-Wunused-but-set-variable]
warning: variable 'tx' set but not used [-Wunused-but-set-variable]
warning: variable 'accum_tx' set but not used [-Wunused-but-set-variable]
warning: variable 'ucode' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Wed, 11 Jul 2018 07:12:12 +0000 (08:12 +0100)]
ipw2x00: remove redundant variables len, ret, reason and crypt
Variables len, ret, reason and crypt are assigned values that
are never read, hence they are redundant and can be removed.
Note: For the variable ret, a return code is being assigned, but
this is not returned and 0 is currently being returned, I believe
this is OK.
Cleans up clang warnings:
warning: variable 'len' set but not used [-Wunused-but-set-variable]
variable 'ret' set but not used [-Wunused-but-set-variable]
warning: variable 'reason' set but not used [-Wunused-but-set-variable]
warning: variable 'crypt' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Mon, 9 Jul 2018 13:38:43 +0000 (14:38 +0100)]
airo: remove unused variables len and dev and clean up formatting
Variables len and dev assigned values but are never used hence they
are redundant and can be removed. Also add in white space in for-loop
and remove some { } braces on if statement.
Cleans up clang warnings:
warning: variable 'len' set but not used [-Wunused-but-set-variable]
warning: variable 'dev' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
rsi: Correct RSI_NEEDED_HEADROOM in mac80211_attach.
Currently, RSI_NEEDED_HEADROOM is '80' for rsi driver, which is wrong.
As per rsi internal frame format, the RSI_NEEDED_HEADROOM shall be '84',
which is 64(dword_align) + 4(extended_desc) + 16(frame_desc).
Hence, corrected the needed headroom.
Signed-off-by: Amol Hanwate <amol.hanwate@redpinesignals.com> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Currently, AP mode will work on only WLAN alone firmware. To give support
for AP and BT dual mode, adding firmware entry in 'struct ta_metadata'.
The firmware entry is based on what coex_mode is used in driver and coex
mode '4' for all AP+BT related functionalities. Hence, added the same.
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
while cleaning up the driver, observed that flash_content pointer is not
necessary in rsi_load_firmware(). Instead of this, driver can use
'fw_entry->data' directly.Hence, removed redundant flash_content pointer.
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Removing redundant device id's from both usb and sdio idtables, as rsi
driver currently supporting only one module(RS9113). Also, replaced ids
with specific defines.
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Due to multiple calls of add interface routine, vif is getting duplicated
and at certain instance, we are out of vifs, causing the driver to behave
abnormal.
Fix: Every vif has a unique mac-id, when we got a vif with same mac-id as
the previous id's, we will override the respective vif.
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
System is unable to wake-up through magic-packet in secured connections.
Because key descriptor is getting corrupted and firmware is unable to
decrypt the magic packet. Fixed the issue by properly preparing it
before sending it to firmware.
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Radio capabilities packet is not prepared properly for 40MHZ case,
ppe_ack_rate is a two byte variable which is initialized wrongly,
hence we are unable to connect, resolved by assigning it properly.
Signed-off-by: Ganapathi Raju <ganapathi.kondraju@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
observed low throughput rates during verification. This is because, QoS
enable flag is overridden by sequence number in the data descriptor frame.
Hence, added the fix for same.
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
mwifiex: use atomic bitops to represent adapter status variables
Driver is using boolean variables to maintain vairous status
information of adapter. These status variables are accessed by
multiple threads and there is a possibility of a race. To avoid
this, convert these variables to a set of bitops flags, to be
operated atomically.
Below variables of mwifiex_adapter are converted to bitop flags:
surprise_removed
is_cmd_timedout
is_suspended
is_hs_configured
hs_enabling
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ganapathi Bhat [Wed, 27 Jun 2018 06:13:39 +0000 (11:43 +0530)]
mwifiex: restructure rx_reorder_tbl_lock usage
Driver must ensure that whenever it holds a pointer to the list
entry mwifiex_rx_reorder_tbl, it must protect the same with
rx_reorder_tbl_lock. At present there are many places where
driver does not ensure this. To cover all cases, spinlocks in
below funcions are moved out and made sure that the caller will
hold the spinlock:
mwifiex_11n_dispatch_pkt_until_start_win()
mwifiex_11n_scan_and_dispatch()
mwifiex_del_rx_reorder_entry()
mwifiex_11n_get_rx_reorder_tbl()
mwifiex_11n_find_last_seq_num()
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ganapathi Bhat [Wed, 27 Jun 2018 06:13:38 +0000 (11:43 +0530)]
mwifiex: replace rx_pkt_lock by rx_reorder_tbl_lock
At present driver spinlock protects iteration of list
rx_reorder_tbl_ptr with rx_reorder_tbl_lock. To protect the
individual items in this list, it uses rx_pkt_lock. But, we can
use a single rx_reorder_tbl_lock for both purposes. This patch
replaces rx_pkt_lock by rx_reorder_tbl_lock.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Lorenzo Bianconi [Thu, 12 Jul 2018 08:50:01 +0000 (10:50 +0200)]
mt76x2: fix CCK protection control frame rate
Use 11M as tx rate for CCK protection control frames
Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Set MFP_CAPABLE bit in hw flag capabilities exported by the driver
Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Golan Ben Ami [Sun, 4 Feb 2018 15:04:31 +0000 (17:04 +0200)]
iwlwifi: update registers changed for 22560 devices
In 22560 devices the firmware will do all the hw configurations,
but that's not ready yet.
Update the correct registers in the driver until the FW is ready
and does it by itself.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Golan Ben Ami [Sun, 4 Feb 2018 14:38:10 +0000 (16:38 +0200)]
iwlwifi: introduce new rx structures used by 22560 RFH
22560 devices RFH uses different structures, which act similar
to the legacy rxq management lists - free and used list.
The iwl_rx_transfer_desc struct is part of the free list,
and consists of pointers to the empty rb's the driver wants to
pass to the fw.
The iwl_rx_completion_desc struct is part of the used list,
and consists of pointers to the buffer the fw filled up
with new rx, both commands and data, for the host.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Golan Ben Ami [Sun, 4 Feb 2018 08:50:05 +0000 (10:50 +0200)]
iwlwifi: cancel the injective function between hw pointers to tfd entry index
Nowadays, the tfd queue max size is 2^8, and the reserved size in the
command header sequence field for the tfd entry index is 8 bits,
allowing an injective function from the hw pointers to the tfd entry index
in the sequence field.
In 22560 devices the tfd queue max size is 2^16, meaning that
the hw pointers are 16 bit long (allowing to point to each entry
in the tfd queue). However, the reserved space in the sequence field for
the tfd entry doesn't change, and we are limited to 8 bit.
This requires cancelling the injective function from hw pointer to
tfd entry in the sequence number.
Use iwl_pcie_get_cmd_index to wrap the hw pointer's to the n_window
size, which is maximum 256 in tx queues, and so, keep the injective
function between the window wrapped hw pointers to tfd entry index in
the sequence.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Golan Ben Ami [Thu, 1 Feb 2018 15:54:48 +0000 (17:54 +0200)]
iwlwifi: update gen3 interrupts - sw error and image response
In 22560 devices the ROM sendis an interrupt to the host
once the IML reading is done.
Handle this interrupt, and indicate sw error in case the
value is fail.
Additionally, the cause for sw error in 22560 devices
have been changed, so update the cause list.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Golan Ben Ami [Tue, 2 Jan 2018 10:08:31 +0000 (12:08 +0200)]
iwlwifi: pcie: update bytes in the byte count table
For devices which use the image loader image, the length of the frame
must be updated in the byte count in bytes, and not dwords as today.
Avoid dividing the input length by 4.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Golan Ben Ami [Sun, 11 Feb 2018 08:57:18 +0000 (10:57 +0200)]
iwlwifi: pcie: support context information for 22560 devices
Context information structure was added to 22000 devices for
firmware self init.
In the next generation of devices the context information
changes significantly, and the original context information
is divided roughly to three data structures: context information gen3,
prph information and prph scratch.
In addition, the init flow changes so the firmware is loaded
by the IML, and so we must allocate the IML on the DRAM and
give the ROM the IML's address before kicking the firmware's
self init.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Golan Ben Ami [Sun, 11 Feb 2018 08:48:32 +0000 (10:48 +0200)]
iwlwifi: pcie: allocate and free rx cr's and tr's tails
The hw now refers to two new blocks:
* rx tr tail - The Tail index on the free buffers queue TR,
which is update by the device after reading the free buffer
from the tr.
* rx cr tail - Updated by the driver when completing
processing a new completion descriptor in the cr.
Add these two new struct to the rxq, allocate and free them
when needed.
In addition, the register for rx write pointer had been changed
to HBUS_TARG_WRPTR. The way to differentiate tx from rx is the
queue number. TX range is 0-511, and RX's is 512-527.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Golan Ben Ami [Sun, 22 Oct 2017 12:58:26 +0000 (15:58 +0300)]
iwlwifi: allow different csr flags for different device families
Different device families may have different flag values
for passing a message to the fw (i.e. SW_RESET).
In order to keep the code readable, and avoid conditioning
upon the family, store a value for each flag, which indicates
the bit that needs to be enabled.
Additionally, support 22560 device csr flags and addresses.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Sun, 24 Jun 2018 09:07:28 +0000 (12:07 +0300)]
iwlwifi: add module parameter to disable 802.11ax
Add a module parameter to disable 802.11ax features in supported
devices. This is useful for testing or if there are interoperability
issues with some APs.
Skbprio (SKB Priority Queue) is a queueing discipline that prioritizes packets
according to their skb->priority field. Under congestion, already-enqueued lower
priority packets will be dropped to make space available for higher priority
packets. Skbprio was conceived as a solution for denial-of-service defenses that
need to route packets with different priorities as a means to overcome DoS
attacks.
v5
*Do not reference qdisc_dev(sch)->tx_queue_len for setting limit. Instead set
default sch->limit to 64.
v4
*Drop Documentation/networking/sch_skbprio.txt doc file to move it to tc man
page for Skbprio, in iproute2.
v3
*Drop max_limit parameter in struct skbprio_sched_data and instead use
sch->limit.
*Reference qdisc_dev(sch)->tx_queue_len only once, during initialisation for
qdisc (previously being referenced every time qdisc changes).
*Move qdisc's detailed description from in-code to Documentation/networking.
*When qdisc is saturated, enqueue incoming packet first before dequeueing
lowest priority packet in queue - improves usage of call stack registers.
*Introduce and use overlimit stat to keep track of number of dropped packets.
v2
*Use skb->priority field rather than DS field. Rename queueing discipline as
SKB Priority Queue (previously Gatekeeper Priority Queue).
*Queueing discipline is made classful to expose Skbprio's internal priority
queues.
Signed-off-by: Nishanth Devarajan <ndev2021@gmail.com> Reviewed-by: Sachin Paryani <sachin.paryani@gmail.com> Reviewed-by: Cody Doucette <doucette@bu.edu> Reviewed-by: Michel Machado <michel@digirati.com.br> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Certain PHY's have issues when operating in GBit slave mode and can
be forced to master mode. Examples are RTL8211C, also the Micrel PHY
driver has a DT setting to force master mode.
If two such chips are link partners the autonegotiation will fail.
Standard defines a self-clearing on read, latched-high bit to
indicate this error. Check this bit to inform the user.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jul 2018 21:10:43 +0000 (14:10 -0700)]
Merge branch 'net-whitespace-cleanups'
Stephen Hemminger says:
====================
net whitespace cleanups
Ran script that I use to check for trailing whitespace and
blank lines at end of files across all files in net/ directory.
These are errors that checkpatch reports and git flags.
These are the resulting fixes broken up mostly by subsystem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: remove redundant input checks in SIOCSIFTXQLEN case of dev_ifsioc
The cited patch added a call to dev_change_tx_queue_len in
SIOCSIFTXQLEN case.
This obsoletes the new len comparison check done before the function call.
Remove it here.
For the desicion of keep/remove the negative value check, we examine the
range check in dev_change_tx_queue_len.
On 64-bit we will fail with -ERANGE. The 32-bit int ifr_qlen will be sign
extended to 64-bits when it is passed into dev_change_tx_queue_len(). And
then for negative values this test triggers:
if (new_len != (unsigned int)new_len)
return -ERANGE;
because:
if (0xffffffffWHATEVER != 0x00000000WHATEVER)
On 32-bit the signed value will be accepted, changing behavior.
Therefore, the negative value check is kept.
Fixes: 3f76df198288 ("net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
cxgb4: collect free Tx/Rx pages and page pointers
Patch 1 collects number of free PSTRUCT page pointers in context
memory.
Patch 2 moves the collection logic for Tx/Rx free pages to common
code, since this information needs to be collected in vmcore device
dump as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: move Tx/Rx free pages collection to common code
This information needs to be collected in vmcore device dump as well.
So, move to common code.
Fixes: fa145d5dfd61 ("cxgb4: display number of rx and tx pages free") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: collect number of free PSTRUCT page pointers
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
mlxsw: Add extack messages for tc flower
Nir says:
This patch set adds extack messages support to tc flower part of mlxsw.
The messages provide clear reasoning to failures, as some of the available
actions and keys are not supported in driver or HW and resources may get
exhausted.
The first patch deals with propagation of the extack pointer among the functions
dealing with key parsing and action sets handling.
Following patches 2-4 add appropriate messages across the different layers of
mlxsw tc flower implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jul 2018 17:00:54 +0000 (10:00 -0700)]
Merge tag 'mac80211-next-for-davem-2018-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Only a few things:
* HE (802.11ax) support in HWSIM
* bypass TXQ with NDP frames as they're special
* convert ahash -> shash in lib80211 TKIP
* avoid playing with tailroom counter defer unless
needed to avoid issues in some cases
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in ieee80211_delayed_tailroom_dec(), during roam,
keys of the old AP will be destroyed and new keys will be
installed. Deletion of the old key causes
crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key
installation causes a transition from 0 to 1.
Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1,
we invoke synchronize_net(); the reason for doing this is to avoid
a race in the TX path as explained in increment_tailroom_need_count().
This synchronize_net() operation can be slow and can affect the station
roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt
is delayed for a while so that upon installation of new key the
transition would be from 1 to 2 instead of 0 to 1 and thereby
improving the roam time.
This is all correct for a STA iftype, but deferring the tailroom_needed
decrement for other iftypes may be unnecessary.
For example, let's consider the case of a 4-addr client connecting to
an AP for which AP_VLAN interface is also created, let the initial
value for tailroom_needed on the AP be 1.
* 4-addr client connects to the AP (AP: tailroom_needed = 1)
* AP will clear old keys, delay decrement of tailroom_needed count
* AP_VLAN is created, it takes the tailroom count from master
(AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1)
* Install new key for the station, assume key is plumbed in the HW,
there won't be any change in tailroom_needed count on AP iface
* Delayed decrement of tailroom_needed count on AP
(AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1)
Because of the delayed decrement on AP iface, tailroom_needed count goes
out of sync between AP(master iface) and AP_VLAN(slave iface) and
there would be unnecessary tailroom created for the packets going
through AP_VLAN iface.
Also, WARN_ONs were observed while trying to bring down the AP_VLAN
interface:
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4)
(ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850)
(ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c)
(ieee80211_stop) (__dev_close_many+0x94/0xb8)
(__dev_close_many) (dev_close_many+0x5c/0xc8)
Restricting delayed decrement to station interface alone fixes the problem
and it makes sense to do so because delayed decrement is done to improve
roam time which is applicable only for client devices.
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In preparing to remove all stack VLA usage from the kernel[1], this
removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of
the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash
to direct shash. The stack allocation will be made a fixed size in a
later patch to the crypto subsystem.
David S. Miller [Tue, 24 Jul 2018 04:30:03 +0000 (21:30 -0700)]
Merge tag 'wireless-drivers-next-for-davem-2018-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.19
The first set of patches for 4.19. Only smaller features and bug
fixes, not really anything major. Also included are changes to
include/linux/bitfield.h, we agreed with Johannes that it makes sense
to apply them via wireless-drivers-next.
Major changes:
ath10k
* support channel 173
* fix spectral scan for QCA9984 and QCA9888 chipsets
ath6kl
* add support for Dell Wireless 1537
ti wlcore
* add support for runtime PM
* enable runtime PM autosuspend support
qtnfmac
* support changing MAC address
* enable source MAC address randomization support
libertas
* fix suspend and resume for SDIO cards
mt76
* add software DFS radar pattern detector for mt76x2 based devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jul 2018 04:17:44 +0000 (21:17 -0700)]
Merge branch 'rds-ipv6'
Ka-Cheong Poon says:
====================
rds: IPv6 support
This patch set adds IPv6 support to the kernel RDS and related
modules. Existing RDS apps using IPv4 address continue to run without
any problem. New RDS apps which want to use IPv6 address can do so by
passing the address in struct sockaddr_in6 to bind(), connect() or
sendmsg(). And those apps also need to use the new IPv6 equivalents
of some of the existing socket options as the existing options use a
32 bit integer to store IP address.
All RDS code now use struct in6_addr to store IP address. IPv4
address is stored as an IPv4 mapped address.
Header file changes
There are many data structures (RDS socket options) used by RDS apps
which use a 32 bit integer to store IP address. To support IPv6,
struct in6_addr needs to be used. To ensure backward compatibility, a
new data structure is introduced for each of those data structures
which use a 32 bit integer to represent an IP address. And new socket
options are introduced to use those new structures. This means that
existing apps should work without a problem with the new RDS module.
For apps which want to use IPv6, those new data structures and socket
options can be used. IPv4 mapped address is used to represent IPv4
address in the new data structures.
Internally, all RDS data structures which contain an IP address are
changed to use struct in6_addr to store the address. IPv4 address is
stored as an IPv4 mapped address. All the functions which take an IP
address as argument are also changed to use struct in6_addr.
RDS/RDMA/IB uses a private data (struct rds_ib_connect_private)
exchange between endpoints at RDS connection establishment time to
support RDMA. This private data exchange uses a 32 bit integer to
represent an IP address. This needs to be changed in order to support
IPv6. A new private data struct rds6_ib_connect_private is introduced
to handle this. To ensure backward compatibility, an IPv6 capable RDS
stack uses another RDMA listener port (RDS_CM_PORT) to accept IPv6
connection. And it continues to use the original RDS_PORT for IPv4 RDS
connections. When it needs to communicate with an IPv6 peer, it uses
the RDS_TCP_PORT to send the connection set up request.
RDS/TCP changes
TCP related code is changed to support IPv6. Note that only an IPv6
TCP listener on port RDS_TCP_PORT is created as it can accept both
IPv4 and IPv6 connection requests.
IB/RDMA changes
The initial private data exchange between IB endpoints using RDMA is
changed to support IPv6 address instead, if the peer address is IPv6.
To ensure backward compatibility, annother RDMA listener port
(RDS_CM_PORT) is used to accept IPv6 connection. An IPv6 capable RDS
module continues to use the original RDS_PORT for IPv4 RDS
connections. When it needs to communicate with an IPv6 peer, it uses
the RDS_CM_PORT to send the connection set up request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are many data structures (RDS socket options) used by RDS apps
which use a 32 bit integer to store IP address. To support IPv6,
struct in6_addr needs to be used. To ensure backward compatibility, a
new data structure is introduced for each of those data structures
which use a 32 bit integer to represent an IP address. And new socket
options are introduced to use those new structures. This means that
existing apps should work without a problem with the new RDS module.
For apps which want to use IPv6, those new data structures and socket
options can be used. IPv4 mapped address is used to represent IPv4
address in the new data structures.
v4: Revert changes to SO_RDS_TRANSPORT
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables RDS to use IPv6 addresses. For RDS/TCP, the
listener is now an IPv6 endpoint which accepts both IPv4 and IPv6
connection requests. RDS/RDMA/IB uses a private data (struct
rds_ib_connect_private) exchange between endpoints at RDS connection
establishment time to support RDMA. This private data exchange uses a
32 bit integer to represent an IP address. This needs to be changed in
order to support IPv6. A new private data struct
rds6_ib_connect_private is introduced to handle this. To ensure
backward compatibility, an IPv6 capable RDS stack uses another RDMA
listener port (RDS_CM_PORT) to accept IPv6 connection. And it
continues to use the original RDS_PORT for IPv4 RDS connections. When
it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to
send the connection set up request.
v5: Fixed syntax problem (David Miller).
v4: Changed port history comments in rds.h (Sowmini Varadhan).
v3: Added support to set up IPv4 connection using mapped address
(David Miller).
Added support to set up connection between link local and non-link
addresses.
Various review comments from Santosh Shilimkar and Sowmini Varadhan.
v2: Fixed bound and peer address scope mismatched issue.
Added back rds_connect() IPv6 changes.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
rds: Changing IP address internal representation to struct in6_addr
This patch changes the internal representation of an IP address to use
struct in6_addr. IPv4 address is stored as an IPv4 mapped address.
All the functions which take an IP address as argument are also
changed to use struct in6_addr. But RDS socket layer is not modified
such that it still does not accept IPv6 address from an application.
And RDS layer does not accept nor initiate IPv6 connections.
v2: Fixed sparse warnings.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
sched: introduce chain templates support with offloading to mlxsw
For the TC clsact offload these days, some of HW drivers need
to hold a magic ball. The reason is, with the first inserted rule inside
HW they need to guess what fields will be used for the matching. If
later on this guess proves to be wrong and user adds a filter with a
different field to match, there's a problem. Mlxsw resolves it now with
couple of patterns. Those try to cover as many match fields as possible.
This aproach is far from optimal, both performance-wise and scale-wise.
Also, there is a combination of filters that in certain order won't
succeed.
Most of the time, when user inserts filters in chain, he knows right away
how the filters are going to look like - what type and option will they
have. For example, he knows that he will only insert filters of type
flower matching destination IP address. He can specify a template that
would cover all the filters in the chain.
This patchset is providing the possibility to user to provide such
template to kernel and propagate it all the way down to device
drivers.
See the examples below.
Create dummy device with clsact first:
There is no chain present by by default:
Add chain number 11 by explicit command:
chain parent ffff: chain 11
Add filter to chain number 12 which does not exist. That will create
implicit chain 12:
chain parent ffff: chain 11
chain parent ffff: chain 12
Delete both chains:
Add a chain with template of type flower allowing to insert rules matching
on last 2 bytes of destination mac address:
The chain with template is now showed in the list:
chain parent ffff: flower chain 0
dst_mac 00:00:00:00:00:00/00:00:00:00:ff:ff
eth_type ipv4
Addition of filters that does not fit the template would fail:
Error: cls_flower: Mask does not fit the template.
We have an error talking to the kernel, -1
Error: cls_flower: Mask does not fit the template.
We have an error talking to the kernel, -1
Additions of filters to chain 22:
Error: cls_flower: Mask does not fit the template.
We have an error talking to the kernel, -1
Error: cls_flower: Mask does not fit the template.
We have an error talking to the kernel, -1
---
v3->v4:
- patch 2:
- new patch
- patch 3:
- new patch, derived from the previous v3 chaintemplate obj patch
- patch 4:
- only templates part as chains creation/deletion is now a separate patch
- don't pass template priv as arg of "change" op
- patch 6:
- rebased on top of flower cvlan patch and ip tos/ttl patch
- patch 7:
- templave priv is no longer passed as an arg to "change" op
- patch 11:
- split from the originally single patch
- patch 12:
- split from the originally single patch
v2->v3:
- patch 7:
- rebase on top of the reoffload patchset
- patch 8:
- rebase on top of the reoffload patchset
v1->v2:
- patch 8:
- remove leftover extack arg in fl_hw_create_tmplt()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>