Mark Brown [Fri, 17 Jan 2020 15:38:56 +0000 (15:38 +0000)]
Merge tag 'asoc-fix-v5.5-rc6' into asoc-5.6
ASoC: Fixes for v5.5
This is mostly driver specific fixes, plus an error handling fix
in the core. There is a rather large diffstat for the stm32 SAI
driver, this is a very large but mostly mechanical update which
wraps every register access in the driver to allow a fix to the
locking which avoids circular locks, the active change is much
smaller and more reasonably sized.
Wei Yongjun [Fri, 17 Jan 2020 02:41:49 +0000 (02:41 +0000)]
ASoC: rt715: fix return value check in rt715_sdw_probe()
In case of error, the function devm_regmap_init() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Wei Yongjun [Wed, 15 Jan 2020 14:30:34 +0000 (14:30 +0000)]
ASoC: rt711: fix return value check in rt711_sdw_probe()
In case of error, the function devm_regmap_init() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Wei Yongjun [Wed, 15 Jan 2020 14:30:27 +0000 (14:30 +0000)]
ASoC: rt700: fix return value check in rt700_sdw_probe()
In case of error, the function devm_regmap_init() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Charles Keepax [Tue, 14 Jan 2020 16:18:40 +0000 (16:18 +0000)]
ASoC: madera: Correct error path handling in madera_out1_demux_put
Should the write to MADERA_OUTPUT_ENABLES_1 fail and out_clamp[0] not be
set an additional error message will be printed. Clear the ret variable
to avoid this.
Marek Vasut [Thu, 19 Dec 2019 21:32:19 +0000 (22:32 +0100)]
ASoC: sgtl5000: add multi endpoint support
Support multiple endpoints on SGTL5000 codec port when used in
of_graph context.
This patch allows to share the codec port between two CPU DAIs.
Example:
Custom STM32MP157C board uses SGTL5000 audio codec. This codec is
connected to two serial audio interfaces, which are configured
either as rx or tx.
From AsoC point of view the topolgy is the following:
// 2 CPU DAIs (SAI2A/B), 1 Codec (SGTL5000)
Playback: CPU-A-DAI(slave) -> (master)CODEC-DAI/port0
Record: CPU-B-DAI(slave) <- (master)CODEC-DAI/port0
In the DT two endpoints have to be associated to the codec port:
sgtl5000_port: port {
sgtl5000_tx_endpoint: endpoint@0 {
remote-endpoint = <&sai2a_endpoint>;
};
sgtl5000_rx_endpoint: endpoint@1 {
remote-endpoint = <&sai2b_endpoint>;
};
};
However, when the audio graph card parses the codec nodes, it expects
to find DAI interface indexes matching the endpoints indexes.
The current patch forces the use of DAI id 0 for both endpoints,
which allows to share the codec DAI between the two CPU DAIs
for playback and capture streams respectively.
Shengjiu Wang [Wed, 4 Dec 2019 12:00:19 +0000 (20:00 +0800)]
ASoC: fsl_asrc: Add support for imx8qm & imx8qxp
There are two asrc module in imx8qm & imx8qxp, each module has
different clock configuration, and the DMA type is EDMA.
So in this patch, we define the new clocks, refine the clock map,
and include struct fsl_asrc_soc_data for different soc usage.
The EDMA channel is fixed with each dma request, one dma request
corresponding to one dma channel. So we need to request dma
channel with dma request of asrc module.
Shengjiu Wang [Wed, 4 Dec 2019 12:00:18 +0000 (20:00 +0800)]
ASoC: dt-bindings: fsl_asrc: add compatible string for imx8qm & imx8qxp
Add compatible string "fsl,imx8qm-asrc" for imx8qm platform,
"fsl,imx8qxp-asrc" for imx8qxp platform.
There are two asrc modules in imx8qm & imx8qxp, the clock mapping is
different for each other, so add new property "fsl,asrc-clk-map"
to distinguish them.
Marek Vasut [Fri, 20 Dec 2019 16:44:50 +0000 (17:44 +0100)]
ASoC: sgtl5000: Fix VDDA and VDDIO comparison
Comparing the voltage of VDDA and VDDIO to determine whether or not to
enable VDDC manual override is insufficient. This is a problem in case
the VDDA is supplied from different regulator than VDDIO, while both
report the same voltage to the regulator framework. In that case where
VDDA and VDDIO is supplied by different regulators, the VDDC manual
override must not be applied.
Fixes: b6319b061ba2 ("ASoC: sgtl5000: Fix charge pump source assignment") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Mark Brown <broonie@kernel.org> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Link: https://lore.kernel.org/r/20191220164450.1395038-2-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
Marek Vasut [Fri, 20 Dec 2019 16:44:49 +0000 (17:44 +0100)]
regulator: core: Add regulator_is_equal() helper
Add regulator_is_equal() helper to compare whether two regulators are
the same. This is useful for checking whether two separate regulators
in a driver are actually the same supply.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Mark Brown <broonie@kernel.org> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Link: https://lore.kernel.org/r/20191220164450.1395038-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Intel: kbl_da7219_max98927: test return value on route add
Fix cppcheck warning:
[sound/soc/intel/boards/kbl_da7219_max98927.c:340] ->
[sound/soc/intel/boards/kbl_da7219_max98927.c:348]: (style) Variable
'ret' is reassigned a value before the old one has been used.
ASoC: SOF: Intel: hda-dai: fix compilation warning in pcm_prepare
Fix GCC warning with W=1, previous cleanup did not remove unnecessary
variable.
sound/soc/sof/intel/hda-dai.c: In function ‘hda_link_pcm_prepare’:
sound/soc/sof/intel/hda-dai.c:265:31: warning: variable ‘hda_stream’
set but not used [-Wunused-but-set-variable]
265 | struct sof_intel_hda_stream *hda_stream;
| ^~~~~~~~~~
Fixes: a3ebccb52efdf ("ASoC: SOF: Intel: hda: reset link DMA state in prepare") Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200113205620.27285-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: rt715: use dev_to_sdw_dev() instead of to_sdw_slave_device()
This patch fixup this error
CC sound/soc/codecs/rt715-sdw.o
linux/sound/soc/codecs/rt715-sdw.c: In function 'rt715_dev_resume':
linux/sound/soc/codecs/rt715-sdw.c:568:28: error: implicit declaration\
of function 'to_sdw_slave_device'; did you mean 'sdw_slave_modalias'?\
[-Werror=implicit-function-declaration]
struct sdw_slave *slave = to_sdw_slave_device(dev);
^~~~~~~~~~~~~~~~~~~
sdw_slave_modalias
linux/sound/soc/codecs/rt715-sdw.c:568:28: warning: initialization of\
'struct sdw_slave *' from 'int' makes pointer from integer without a\
cast [-Wint-conversion]
cc1: some warnings being treated as errors
Chen Zhou [Mon, 13 Jan 2020 13:32:42 +0000 (21:32 +0800)]
ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m
If CONFIG_SND_ATMEL_SOC_DMA=m, build error:
sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
(.text+0x7cd): undefined reference to `atmel_pcm_dma_platform_register'
Function atmel_pcm_dma_platform_register is defined under
CONFIG SND_ATMEL_SOC_DMA, so select SND_ATMEL_SOC_DMA in
CONFIG SND_ATMEL_SOC_SSC, same to CONFIG_SND_ATMEL_SOC_PDC.
Stephan Gerhold [Sun, 5 Jan 2020 10:27:53 +0000 (11:27 +0100)]
ASoC: msm8916-wcd-digital: Reset RX interpolation path after use
For some reason, attempting to route audio through QDSP6 on MSM8916
causes the RX interpolation path to get "stuck" after playing audio
a few times. In this situation, the analog codec part is still working,
but the RX path in the digital codec stops working, so you only hear
the analog parts powering up. After a reboot everything works again.
So far I was not able to reproduce the problem when using lpass-cpu.
The downstream kernel driver avoids this by resetting the RX
interpolation path after use. In mainline we do something similar
for the TX decimator (LPASS_CDC_CLK_TX_RESET_B1_CTL), but the
interpolator reset (LPASS_CDC_CLK_RX_RESET_CTL) got lost when the
msm8916-wcd driver was split into analog and digital.
Fix this problem by adding the reset to
msm8916_wcd_digital_enable_interpolator().
Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200105102753.83108-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
Stephan Gerhold [Sat, 11 Jan 2020 16:40:04 +0000 (17:40 +0100)]
ASoC: msm8916-wcd-analog: Fix MIC BIAS Internal1
MIC BIAS Internal1 is broken at the moment because we always
enable the internal rbias resistor to the TX2 line (connected to
the headset microphone), rather than enabling the resistor connected
to TX1.
Move the RBIAS code to pm8916_wcd_analog_enable_micbias_int1/2()
to fix this.
Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200111164006.43074-3-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
Stephan Gerhold [Sat, 11 Jan 2020 16:40:03 +0000 (17:40 +0100)]
ASoC: msm8916-wcd-analog: Fix selected events for MIC BIAS External1
MIC BIAS External1 sets pm8916_wcd_analog_enable_micbias_ext1()
as event handler, which ends up in pm8916_wcd_analog_enable_micbias_ext().
But pm8916_wcd_analog_enable_micbias_ext() only handles the POST_PMU
event, which is not specified in the event flags for MIC BIAS External1.
This means that the code in the event handler is never actually run.
Set SND_SOC_DAPM_POST_PMU as the only event for the handler to fix this.
Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200111164006.43074-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen [Fri, 10 Jan 2020 23:57:51 +0000 (17:57 -0600)]
ASoC: hdac_hda: Fix error in driver removal after failed probe
In case system has multiple HDA codecs, and codec probe fails for
at least one but not all codecs, driver will end up cancelling
a non-initialized timer context upon driver removal.
In case system has multiple HDA controllers, it can happen that
same HDA codec driver is used for codecs of multiple controllers.
In this case, SOF may fail to probe the HDA driver and SOF
initialization fails.
SOF HDA code currently relies that a call to request_module() will
also run device matching logic to attach driver to the codec instance.
However if driver for another HDA controller was already loaded and it
already loaded the HDA codec driver, this breaks current logic in SOF.
In this case the request_module() SOF does becomes a no-op and HDA
Codec driver is not attached to the codec instance sitting on the HDA
bus SOF is controlling. Typical scenario would be a system with both
external and internal GPUs, with driver of the external GPU loaded
first.
Fix this by adding similar logic as is used in legacy HDA driver
where an explicit device_attach() call is done after request_module().
Also add logic to propagate errors reported by device_attach() back
to caller. This also works in the case where drivers are not built
as modules.
Bard liao [Fri, 10 Jan 2020 23:57:48 +0000 (17:57 -0600)]
ASoC: SOF: Intel: lower print level to dbg if we will reinit DSP
We will reinit DSP in a loop when it fails to initialize the first
time, as recommended. So, it is not an error before we finally give
up. And reorder the trace to make it more readable.
Rander Wang [Fri, 10 Jan 2020 22:25:28 +0000 (16:25 -0600)]
ASoC: Intel: common: add match tables for CNL/CFL/CML w/ SoundWire
The two configurations are with the Realtek 3-in-1 board requiring all
4 links to be enabled, or basic configuration with the on-board
RT700 using link1.
For now we only have definitions for CML. CNL and CFL are just
placeholders.
Bard Liao [Fri, 10 Jan 2020 22:25:27 +0000 (16:25 -0600)]
ASoC: Intel: common: add match tables for ICL w/ SoundWire
The two configurations are with the Realtek 3-in-1 board requiring all
4 links to be enabled, or basic configuration with the on-board RT700
using link0.
ASoC: Intel: common: soc-acpi: declare new tables for SoundWire
We cannot really lump SoundWire-based configurations into the same
tables since the mechanisms to identify boards is based on link
configurations and _ADR instead of _HID for I2S, so define new tables
For SoundWire support, we added a 'link_mask' to describe the PCB hardware
layout. This helped form a signature that can be used as a first-order way
of detecting the hardware and selecting the machine driver.
The concept of link_mask is however not enough. Some BIOS enable all links,
even when there are no devices physically connected. We can also see
variations with multiple devices attached on one link, or different types
of devices connected on the same link. To accurately represent the
hardware, we need to build static tables where each link exposes a list of
expected devices represented by the 64-bit _ADR field (which uniquely
identifies each device).
The new 'links' field is optional when the link_mask is sufficient to
represent a platform in a unique way.
The existing mechanism to support I2C devices is left as is, it'd be too
invasive to change the existing support for _HID and the notion of link is
not relevant either.
Kai Vehmanen [Fri, 10 Jan 2020 23:57:49 +0000 (17:57 -0600)]
ASoC: SOF: fix PCM playback through ALSA OSS emulation
Any app using ALSA OSS emulation on top of SOF will fail
to error from OSS SNDCTL_DSP_SETFMT ioctl. Reported initially
as an issue with xournalpp (application using PortAudio with
an OSS backend), but applies more generally to other apps
using OSS as well.
Problem is caused by SOF PCM not supporting repeated calls
to hw_params(), without matching calls to pcm_free(). This
is however exactly what the ALSA OSS PCM code is doing when
it is handling the OSS ioctls.
The problem will lead to leaking of DSP resources and eventual
failure of DSP PCM_PARAMS IPC.
The existing machine driver depends on SPI Master capabilities, but
the Kconfig does not model this dependency and the SPI controller
needs to be selected as well.
Without this patch the machine driver probe would fail with the
spi-RT5677AA:00 component never registered by the ACPI/LPSS subsystem.
Paul Burton [Thu, 9 Jan 2020 19:14:22 +0000 (11:14 -0800)]
ASoC: txx9: Remove unused rtd variable
Commit a857e073ffc6 ("ASoC: txx9: txx9aclc: remove snd_pcm_ops") removed
the last use of the rtd variable but didn't remove its definition,
leading to the following warning/error for MIPS rbtx49xx_defconfig
builds:
sound/soc/txx9/txx9aclc.c: In function 'txx9aclc_pcm_hw_params':
sound/soc/txx9/txx9aclc.c:54:30: error: unused variable 'rtd'
[-Werror=unused-variable]
struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
^~~
Resolve this by removing the unused variable.
Signed-off-by: Paul Burton <paulburton@kernel.org> Fixes: a857e073ffc6 ("ASoC: txx9: txx9aclc: remove snd_pcm_ops") Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Link: https://lore.kernel.org/r/20200109191422.334516-1-paulburton@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
When we stop stream, if it was Playback, we might need to care
about power down time. In such case, we need to use delayed work.
We have same implementation for it at soc-pcm.c and soc-compress.c,
but we don't want to have duplicate code.
This patch adds snd_soc_dapm_stream_stop(), and share same code.
We need to setup rtd->close_delayed_work_func.
It will be set at snd_soc_dai_compress_new() or soc_new_pcm().
But these setups close_delayed_work() which is same name /
same implemantaion, but different local code.
To reduce duplicate code, this patch moves it as
snd_soc_close_delayed_work() and share same code.
ASoC: soc-core: do pinctrl_pm_select_xxx() as component
ALSA SoC need to care pinctrl_pm_select_xxx().
It is called at soc-core and soc-pcm.
soc-pcm is controlling it for activate DAI.
soc-core is controlling it for whole system
(= suspend/resume/probe/poweroff).
If we focus to soc-core side, it need to care about BIAS level.
Then, snd_soc_suspend() only is controlling it by Component base (a).
Other functions are DAI base (b).
(1) is called for all component (CPU/Codec/Platform), and
(2) is called for CPU DAIs.
Here, component->dev is same as dai->dev.
This means, it is called in duplicate on CPU case.
This patch removes (2).
If so, we can use component pointer array instead of list_head,
in such case, code can be more simple.
This patch removes struct snd_soc_rtdcom_list that is only
of temporary value, and convert to pointer array.
Olivier Moysan [Fri, 10 Jan 2020 13:11:31 +0000 (14:11 +0100)]
ASoC: stm32: dfsdm: fix 16 bits record
In stm32_afsdm_pcm_cb function, the transfer size is provided in bytes.
However, samples are copied as 16 bits words from iio buffer.
Divide by two the transfer size, to copy the right number of samples.
This patch adds support to WSA8810/WSA8815 Class-D Smart Speaker
Amplifier. This Amplifier is primarily interfaced with SoundWire.
One WSA is used for mono speaker configuration and second one
would give stereo setup.
This patch is tested on SDM845 based DragonBoard DB845c and
Lenovo YOGA C630 Laptop based on SDM850 with WSA8815
speaker amplifiers.
This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker
Amplifier. This Amplifier also has a simple thermal sensor for
over temperature and speaker protection.
Olivier Moysan [Thu, 9 Jan 2020 08:32:54 +0000 (09:32 +0100)]
ASoC: stm32: sai: fix possible circular locking
In current driver, locks can be taken as follows:
- Register access: take a lock on regmap config and then on clock.
- Master clock provider: take a lock on clock and then on regmap config.
This can lead to the circular locking summarized below.
Remove peripheral clock management through regmap framework, and manage
peripheral clock in driver instead. On register access, lock on clock
is taken first, which allows to avoid possible locking issue.
Commit 62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when changing
sensitive registers") extended the code for handling many controls by
adding a custom put function to them. That new custom put function
properly handles relations between codec's hardware registers. However
they used card->dapm_mutex to properly serialize those operations. This
in turn triggers a lockdep warning about possible circular dependency.
Fix this by introducing a separate mutex only for serializing the SHDN
hardware register related operations.
This fixes the following lockdep warning observed on Exynos4412-based
Odroid U3 board:
======================================================
WARNING: possible circular locking dependency detected
5.5.0-rc5-next-20200107 #166 Not tainted
------------------------------------------------------
alsactl/1104 is trying to acquire lock: ed0d50f4 (&card->dapm_mutex){+.+.}, at: max98090_shdn_save+0x1c/0x28
but task is already holding lock: edb4b49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
ASoC: max98090: fix incorrect helper in max98090_dapm_put_enum_double()
Commit 62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when changing
sensitive registers") extended the code for handling "LTENL Mux", "LTENR
Mux", "LBENL Mux" and "LBENR Mux" controls by adding a custom
max98090_dapm_put_enum_double() function to them. However that function
used incorrect helper to get its component object. Fix this by using the
proper snd_soc_dapm_* helper.
This fixes the following NULL pointer exception observed on
Exynos4412-based Odroid U3 board:
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 000000b0
pgd = (ptrval)
[000000b0] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1104 Comm: alsactl Not tainted 5.5.0-rc5-next-20200107 #166
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at __mutex_lock+0x54/0xb18
LR is at ___might_sleep+0x3c/0x2e0
...
Process alsactl (pid: 1104, stack limit = 0x(ptrval))
...
[<c0b49630>] (__mutex_lock) from [<c0b4a110>] (mutex_lock_nested+0x1c/0x24)
[<c0b4a110>] (mutex_lock_nested) from [<c0839b3c>] (max98090_shdn_save+0x1c/0x28)
[<c0839b3c>] (max98090_shdn_save) from [<c083a4f8>] (max98090_dapm_put_enum_double+0x20/0x40)
[<c083a4f8>] (max98090_dapm_put_enum_double) from [<c080d0e8>] (snd_ctl_ioctl+0x190/0xbb8)
[<c080d0e8>] (snd_ctl_ioctl) from [<c02cafec>] (ksys_ioctl+0x470/0xaf8)
[<c02cafec>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
...
---[ end trace 0e93f0580f4b9241 ]---
Fixes: 62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when changing sensitive registers") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200108115007.31095-1-m.szyprowski@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: max98090: fix incorrect helper in max98090_dapm_put_enum_double()
Commit 62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when changing
sensitive registers") extended the code for handling "LTENL Mux", "LTENR
Mux", "LBENL Mux" and "LBENR Mux" controls by adding a custom
max98090_dapm_put_enum_double() function to them. However that function
used incorrect helper to get its component object. Fix this by using the
proper snd_soc_dapm_* helper.
This fixes the following NULL pointer exception observed on
Exynos4412-based Odroid U3 board:
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 000000b0
pgd = (ptrval)
[000000b0] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1104 Comm: alsactl Not tainted 5.5.0-rc5-next-20200107 #166
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at __mutex_lock+0x54/0xb18
LR is at ___might_sleep+0x3c/0x2e0
...
Process alsactl (pid: 1104, stack limit = 0x(ptrval))
...
[<c0b49630>] (__mutex_lock) from [<c0b4a110>] (mutex_lock_nested+0x1c/0x24)
[<c0b4a110>] (mutex_lock_nested) from [<c0839b3c>] (max98090_shdn_save+0x1c/0x28)
[<c0839b3c>] (max98090_shdn_save) from [<c083a4f8>] (max98090_dapm_put_enum_double+0x20/0x40)
[<c083a4f8>] (max98090_dapm_put_enum_double) from [<c080d0e8>] (snd_ctl_ioctl+0x190/0xbb8)
[<c080d0e8>] (snd_ctl_ioctl) from [<c02cafec>] (ksys_ioctl+0x470/0xaf8)
[<c02cafec>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
...
---[ end trace 0e93f0580f4b9241 ]---
Fixes: 62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when changing sensitive registers") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200108115007.31095-1-m.szyprowski@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Yongjun [Wed, 8 Jan 2020 03:59:54 +0000 (03:59 +0000)]
ASoC: amd: acp3x: Fix return value check in acp3x_dai_probe()
In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Arnd Bergmann [Tue, 7 Jan 2020 21:48:35 +0000 (22:48 +0100)]
ASoC: gtm601: fix build warning
The driver produces warnings without CONFIG_OF, and makes
no sense without it either:
sound/soc/codecs/gtm601.c:50:34: error: 'bm818_dai' defined but not used [-Werror=unused-variable]
static struct snd_soc_dai_driver bm818_dai = {
^~~~~~~~~
sound/soc/codecs/gtm601.c:32:34: error: 'gtm601_dai' defined but not used [-Werror=unused-variable]
static struct snd_soc_dai_driver gtm601_dai = {
^~~~~~~~~~
ASoC: SOF: pci: change the default firmware path when the community key is used
Since ApolloLake, Intel platforms require signed firmware. On all
Windows platforms the default is to require the Intel production key
be used. But some platforms allow for a community key to be used,
which allows developers to compile/build their own firmware.
In the linux-firmware tree, the default intel/sof path is used for
firmwares signed for the production key, and files signed with the
community key are located in intel/sof/community.
Since we don't have an API to query which key is used on what
platforms, we have to rely on DMI-based quirks.
Developers can bypass this mechanism by setting a kernel 'fw_path'
module parameter. Additional dynamic debug traces are provided to help
debug cases where the wrong file might be used.
Takashi Iwai [Tue, 7 Jan 2020 07:09:56 +0000 (08:09 +0100)]
ASoC: Fix NULL dereference at freeing
When an ASoC driver with pcm_destruct component ops is freed before
the PCM object instantiation (e.g. deferring the probe), it hits an
Oops at snd_soc_pcm_component_free() that calls the pcm_destruct ops
unconditionally.
Fix it by adding a NULL-check of rtd->pcm before calling callbacks.
Fixes: c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcm_destruct") Reported-by: Matthias Brugger <matthias.bgg@gmail.com> Tested-by: Ben Ho <ben.ho@mediatek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200107070956.15807-1-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Sam McNally [Fri, 3 Jan 2020 01:50:19 +0000 (12:50 +1100)]
ASoC: Intel: sof_rt5682: Ignore the speaker amp when there isn't one.
Some members of the Google_Hatch family include a rt5682 jack codec, but
no speaker amplifier. This uses the same driver (sof_rt5682) as a
combination of rt5682 jack codec and max98357a speaker amplifier. Within
the sof_rt5682 driver, these cases are not currently distinguishable,
relying on a DMI quirk to decide the configuration. This causes an
incorrect configuration when only the rt5682 is present on a
Google_Hatch device.
For CML, the jack codec is used as the primary key when matching,
with a possible speaker amplifier described in quirk_data. The two cases
of interest are the second and third 10EC5682 entries in
snd_soc_acpi_intel_cml_machines[]. The second entry matches the
combination of rt5682 and max98357a, resulting in the quirk_data field
in the snd_soc_acpi_mach being non-null, pointing at
max98357a_spk_codecs, the snd_soc_acpi_codecs for the matched speaker
amplifier. The third entry matches just the rt5682, resulting in a null
quirk_data.
The sof_rt5682 driver's DMI data matching identifies that a speaker
amplifier is present for all Google_Hatch family devices. Detect cases
where there is no speaker amplifier by checking for a null quirk_data in
the snd_soc_acpi_mach and remove the speaker amplifier bit in that case.
When a quirk for the Irbis NB41 netbook was added, to override the defaults
for this device, I forgot to add/keep the BYT_CHT_ES8316_SSP0 part of the
defaults, completely breaking audio on this netbook.
This commit adds the BYT_CHT_ES8316_SSP0 flag to the Irbis NB41 netbook
quirk, making audio work again.
Cc: stable@vger.kernel.org Cc: russianneuromancer@ya.ru Fixes: aa2ba991c420 ("ASoC: Intel: bytcht_es8316: Add quirk for Irbis NB41 netbook") Reported-and-tested-by: russianneuromancer@ya.ru Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200106113903.279394-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: amd: Added ACP3x system resume and runtime pm
When system wide suspend happens, ACP will be powered off
and when system resumes,for audio usecase to continue,all
the runtime configuration data needs to be programmed again.
Added resume pm call back to ACP pm ops and also added runtime
PM operations for ACP3x PCM platform device.
Device will enter into D3 state when there is no activity
on audio I2S lines.
projects / linux.git / log