Philip Cox [Sat, 9 Dec 2017 04:09:01 +0000 (23:09 -0500)]
drm/amdkfd: Fixup incorrect info in the CZ CRAT table
* Wrong value for max_waves_per_simd
* Missing ATC capability bit
Signed-off-by: Philip Cox <Philip.Cox@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Amber Lin [Sat, 9 Dec 2017 04:09:00 +0000 (23:09 -0500)]
drm/amdkfd: Add perf counters to topology
For hardware blocks whose performance counters are accessed via MMIO
registers, KFD provides the support for those privileged blocks.
IOMMU is one of those privileged blocks. Most performance counter properties
required by Thunk are available at /sys/bus/event_source/devices/amd_iommu.
This patch adds properties to topology in KFD sysfs for information not
available in /sys/bus/event_source/devices/amd_iommu. They are shown at
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/ formatted as
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/<block>/<property>, i.e.
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/max_concurrent.
For dGPUs, who don't have IOMMU, nothing appears under
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf.
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Generate and parse VCRAT tables for dGPUs in kfd_topology_add_device.
Some information that isn't available in the CRAT table is patched
into the topology after parsing.
HSA_CAP_DOORBELL_TYPE_1_0 is dependent on the ASIC feature
CP_HQD_PQ_CONTROL.SLOT_BASED_WPTR, which was not introduced in VI
until Carrizo. Report HSA_CAP_DOORBELL_TYPE_PRE_1_0 on Tonga ASICs.
v2: Added #include <linux/pci.h> to kfd_crat.c to make it compile
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Ben Goz <ben.goz@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Felix Kuehling [Sat, 9 Dec 2017 04:08:58 +0000 (23:08 -0500)]
drm/amdkfd: Add topology support for CPUs
Currently, the KFD topology information is generated by parsing the CRAT
(ACPI) table. However, at present CRAT table is available only for AMD
APUs. To support CPUs on systems without a CRAT table, the KFD driver will
create a Virtual CRAT (VCRAT) table and then the existing code will parse
that table to generate topology.
Change kfd_cache_properties.sibling_map[256] to
kfd_cache_properties.sibling_map[32]. Since, CRAT uses bitmap for
sibling_map, it is more efficient to use bitmap in the kfd structure
also.
Modify kfd_topology_enum_kfd_devices(..) function to support non-GPU
nodes. The function returned NULL when it encountered non-GPU (say CPU)
nodes. This caused kfd_ioctl_create_event and kfd_init_apertures to fail
for Intel + Tonga.
kfd_topology_enum_kfd_devices will now parse all the nodes and return
valid kfd_dev for nodes with GPU.
drm/amdkfd: Decouple CRAT parsing from device list update
Currently, CRAT parsing is intertwined with topology_device_list and
hence repeated calls to kfd_parse_crat_table() will fail. Decouple
kfd_parse_crat_table() and topology_device_list.
kfd_parse_crat_table() will parse CRAT and add topology devices to a
temporary list temp_topology_device_list and then
kfd_topology_update_device_list will move contents from temporary list to
master list.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reorganize and rename kfd_topology_get_crat_acpi function. In this way
acpi_get_table(..) needs to be called only once. This will also aid in
dGPU topology implementation.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Felix Kuehling [Sat, 9 Dec 2017 04:08:49 +0000 (23:08 -0500)]
drm/amdkfd: Group up CRAT related functions
Take CRAT related functions out of kfd_topology.c and place them in
kfd_crat.c. This is the initial step of supporting more CRAT features,
i.e. creating virtual CRAT table for KFD devices without CRAT.
v2: Minor cleanup that was missed previously because code moved around
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Yong Zhao [Sat, 9 Dec 2017 04:08:48 +0000 (23:08 -0500)]
drm/amdkfd: Fix memory leaks in kfd topology
Kobject created using kobject_create_and_add() can be freed using
kobject_put() when there is no referenece any more. However,
kobject memory allocated with kzalloc() has to set up a release
callback in order to free it when the counter decreases to 0.
Otherwise it causes memory leak.
Flora Cui [Sat, 9 Dec 2017 04:08:46 +0000 (23:08 -0500)]
drm/amdkfd: Update number of compute unit from KGD
Overwrite the active simd_count from KGD at driver loading time. This is
based on assumption that register GC_USER_SHADER_ARRAY_CONFIG won’t get
changed.
V2: remove the incorrect simd_count reported at loading module.
Felix Kuehling [Mon, 27 Nov 2017 23:29:52 +0000 (18:29 -0500)]
drm/amdkfd: Use ref count to prevent kfd_process destruction
Use a reference counter instead of a lock to prevent process
destruction while functions running out of process context are using
the kfd_process structure. In many cases these functions don't need
the structure to be locked. In the few cases that really do need the
process lock, take it explicitly.
This helps simplify lock dependencies between the process lock and
other locks, particularly amdgpu and mm_struct locks. This will be
important when amdgpu calls back to amdkfd for memory evictions.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Felix Kuehling [Mon, 27 Nov 2017 23:29:51 +0000 (18:29 -0500)]
drm/amdkfd: Make kfd_process reference counted
This will be used to elliminate the use of the process lock for
preventing concurrent process destruction. This will simplify lock
dependencies between KFD and KGD.
This also simplifies the process destruction in a few ways:
* Don't allocate work struct dynamically
* Remove unnecessary hack that increments mm reference counter
* Remove unnecessary process locking during destruction
Felix Kuehling [Mon, 27 Nov 2017 23:29:50 +0000 (18:29 -0500)]
drm/amdkfd: Get reference to lead_thread task struct
Increment the kfd_process.lead_thread's reference counter to make
it safe to dereference. This is needed for getting a safe reference
to the process' mm_struct.
Felix Kuehling [Mon, 27 Nov 2017 23:29:45 +0000 (18:29 -0500)]
drm/amdkfd: map multiple processes to HW scheduler
Allow HWS to to execute multiple processes on the hardware
concurrently. The number of concurrent processes is limited by
the number of VMIDs allocated to the HWS.
A module parameter can be used for limiting this further or turn
it off altogether (mainly for debugging purposes).
Signed-off-by: Yong Zhao <yong.zhao@amd.com> Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Kent Russell [Mon, 4 Dec 2017 11:50:17 +0000 (06:50 -0500)]
drm/amdkfd: Fix printing pointer cast
Just print a pointer instead of casting
v2: Remove the 0x prefix, since %p prints that automatically, and remove
it from one other spot as well
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Philip Yang [Mon, 27 Nov 2017 23:29:44 +0000 (18:29 -0500)]
drm/amdkfd: Add crash protection in debugger register path
After debugger is registered, the pqm_destroy_queue fails because is_debug
is true, the queue should not be removed from process_queue_list since
the count is not reduced.
Test application calls debugger unregister without register debugger, add
null pointer check protection to avoid crash for this case
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Felix Kuehling [Tue, 14 Nov 2017 21:41:20 +0000 (16:41 -0500)]
drm/amdkfd: Add support for user-mode trap handlers
A second-level user mode trap handler can be installed. The CWSR trap
handler jumps to the secondary trap handler conditionally for any
conditions not handled by it. This can be used e.g. for debugging or
catching math exceptions.
When CWSR is disabled, the user mode trap handler is installed as
first level trap handler.
Signed-off-by: Shaoyun.liu <shaoyun.liu@amd.com> Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Felix Kuehling [Tue, 14 Nov 2017 21:41:19 +0000 (16:41 -0500)]
drm/amdkfd: Add CWSR support
This hardware feature allows the GPU to preempt shader execution in
the middle of a compute wave, save the state and restore it later
to resume execution.
Memory for saving the state is allocated per queue in user mode and
the address and size passed to the create_queue ioctl. The size
depends on the number of waves that can be in flight simultaneously
on a given ASIC.
Felix Kuehling [Wed, 1 Nov 2017 23:21:58 +0000 (19:21 -0400)]
drm/amd: Update kgd_kfd interface for resuming SDMA queues
Add wptr and mm parameters to hqd_sdma_load and pass these parameters
from device_queue_manager through the mqd_manager.
SDMA doesn't support polling while the engine believes it's idle. The
driver must update the wptr. The new parameters will be used for looking
up the updated value from the specified mm when SDMA queues are resumed
after being disabled.
Dave Airlie [Thu, 21 Dec 2017 01:17:45 +0000 (11:17 +1000)]
Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (171 commits)
drm/amdgpu: fix test for shadow page tables
drm/amd/display: Expose dpp1_set_cursor_attributes
drm/amd/display: Update FMT and OPPBUF functions
drm/amd/display: check for null before calling is_blanked
drm/amd/display: dal 3.1.27
drm/amd/display: Fix unused variable warnings.
drm/amd/display: Only blank DCN when we have set_blank implementation
drm/amd/display: Put dcn_mi_registers with other structs
drm/amd/display: hubp refactor
drm/amd/display: integrating optc pseudocode
drm/amd/display: Call validate_fbc should_enable_fbc
drm/amd/display: Clean up DCN cursor code
drm/amd/display: fix 180 full screen pipe split
drm/amd/display: reprogram surface config on scaling change
drm/amd/display: Remove dwbc from pipe_ctx
drm/amd/display: Use the maximum link setting which EDP reported.
drm/amd/display: Add hdr_supported flag
drm/amd/display: fix global sync param retrieval when not pipe splitting
drm/amd/display: Update HUBP
drm/amd/display: fix rotated surface scaling
...
Dave Airlie [Thu, 21 Dec 2017 01:10:35 +0000 (11:10 +1000)]
Merge tag 'omapdrm-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for v4.16
* support memory bandwidth limits
* DSI command mode panel cleanups for N9
* DMM error handling
* tag 'omapdrm-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (27 commits)
drm: omapdrm: Simplify platform registration
drm: omapdrm: Remove filename from header and fix copyright tag
drm/omap: DMM: Check for DMM readiness after successful transaction commit
drm/omap: DMM: Print information if we received an error interrupt
drm/omap: DMM: In case of error/timeout in wait_status() print the reason
drm/omap: DMM: Fix DMM_IRQSTAT_ERR_MASK definition
drm: omapdrm: Deconstruct the omap_drv.h header.
drm: omapdrm: venc: Return error code on OF parsing failure
drm: omapdrm: dpi: Remove dpi_data port_initialized field
drm: omapdrm: dss: Make dss_dump_clocks() function static
drm: omapdrm: dss: Set the DMA coherent mask
drm: omapdrm: Remove unused omap_dss_find_device() function
drm: omapdrm: Pass drm_device to omap_gem_resume()
drm: omapdrm: dpi: Don't treat GPIO probe deferral as an error
drm/omap: panel-dsi-cm: switch to gpiod
drm/omap: panel-dsi-cm: add external backlight support
drm/omap: panel-dsi-cm: add physical size support
drm/omap: panel-dsi-cm: add regulator support
drm/omap: panel-dsi-cm: fix driver
drm/omap: add support for physical size hints from display drivers
...
Dave Airlie [Thu, 21 Dec 2017 01:10:20 +0000 (11:10 +1000)]
Merge tag 'tilcdc-4.16' of https://github.com/jsarha/linux into drm-next
drm/tilcdc changes for 4.16
* tag 'tilcdc-4.16' of https://github.com/jsarha/linux:
drm/tilcdc: make tilcdc_mode_hvtotal() static
drm/tilcdc: Remove drm_framebuffer_get() and *_put() calls
drm/tilcdc: ensure nonatomic iowrite64 is not used
Dave Airlie [Thu, 21 Dec 2017 01:08:30 +0000 (11:08 +1000)]
Merge tag 'drm-intel-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix documentation build issues (Randy, Markus)
- Fix timestamp frequency calculation for perf on CNL (Lionel)
- New DMC firmware for Skylake (Anusha)
- GTT flush fixes and other GGTT write track and refactors (Chris)
- Taint kernel when GPU reset fails (Chris)
- Display workarounds organization (Lucas)
- GuC and HuC initialization clean-up and fixes (Michal)
- Other fixes around GuC submission (Michal)
- Execlist clean-ups like caching ELSP reg offset and improving log readability (Chri\
s)
- Many other improvements on our logs and dumps (Chris)
- Restore GT performance in headless mode with DMC loaded (Tvrtko)
- Stop updating legacy fb parameters since FBC is not using anymore (Daniel)
- More selftest improvements (Chris)
- Preemption fixes and improvements (Chris)
- x86/early-quirks improvements for Intel graphics stolen memory. (Joonas, Matthew)
- Other improvements on Stolen Memory code to be resource centric. (Matthew)
- Improvements and fixes on fence allocation/release (Chris).
GVT:
- fixes for two coverity scan errors (Colin)
- mmio switch code refine (Changbin)
- more virtual display dmabuf fixes (Tina/Gustavo)
- misc cleanups (Pei)
- VFIO mdev display dmabuf interface and gvt support (Tina)
- VFIO mdev opregion support/fixes (Tina/Xiong/Chris)
- workload scheduling optimization (Changbin)
- preemption fix and temporal workaround (Zhenyu)
- and misc fixes after refactor (Chris)
* tag 'drm-intel-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits)
drm/i915: Update DRIVER_DATE to 20171214
drm/i915: properly init lockdep class
drm/i915: Show engine state when hangcheck detects a stall
drm/i915: make CS frequency read support missing more obvious
drm/i915/guc: Extract doorbell verification into a function
drm/i915/guc: Extract clients allocation to submission_init
drm/i915/guc: Extract doorbell creation from client allocation
drm/i915/guc: Call invalidate after changing the vfunc
drm/i915/guc: Extract guc_init from guc_init_hw
drm/i915/guc: Move GuC workqueue allocations outside of the mutex
drm/i915/guc: Move shared data allocation away from submission path
drm/i915: Unwind i915_gem_init() failure
drm/i915: Ratelimit request allocation under oom
drm/i915: Allow fence allocations to fail
drm/i915: Mark up potential allocation paths within i915_sw_fence as might_sleep
drm/i915: Don't check #active_requests from i915_gem_wait_for_idle()
drm/i915/fence: Use rcu to defer freeing of irq_work
drm/i915: Dump the engine state before declaring wedged from wait_for_engines()
drm/i915: Bump timeout for wait_for_engines()
drm/i915: Downgrade misleading "Memory usable" message
...
Christian König [Wed, 20 Dec 2017 13:21:25 +0000 (14:21 +0100)]
drm/amdgpu: fix test for shadow page tables
They don't work 100% correctly at the moment.
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Tue, 12 Dec 2017 19:14:10 +0000 (14:14 -0500)]
drm/amd/display: Update FMT and OPPBUF functions
Updates to FMT and OPPBUF programming from HW team
pseudocode review.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yue Hin Lau [Tue, 12 Dec 2017 19:34:30 +0000 (14:34 -0500)]
drm/amd/display: check for null before calling is_blanked
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrew Jiang [Tue, 12 Dec 2017 17:34:47 +0000 (12:34 -0500)]
drm/amd/display: dal 3.1.27
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 12 Dec 2017 15:48:50 +0000 (10:48 -0500)]
drm/amd/display: Fix unused variable warnings.
... since linux kernel compile treats warnings as errors.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yue Hin Lau [Mon, 4 Dec 2017 21:58:11 +0000 (16:58 -0500)]
drm/amd/display: Only blank DCN when we have set_blank implementation
Also rename timing_generator to optc
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Thu, 7 Dec 2017 20:49:43 +0000 (15:49 -0500)]
drm/amd/display: Put dcn_mi_registers with other structs
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yue Hin Lau [Fri, 8 Dec 2017 20:57:44 +0000 (15:57 -0500)]
drm/amd/display: hubp refactor
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yue Hin Lau [Thu, 7 Dec 2017 19:43:24 +0000 (14:43 -0500)]
drm/amd/display: integrating optc pseudocode
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
validate_fbc never fails a modeset. It's simply used to decide whether
to use FBC or not. Calling it validate_fbc might be confusing to some so
rename it to should_enable_fbc.
With that let's also remove the DC_STATUS return code and return bool
and make enable_fbc a void function since we never check it's return
value and probably never want to anyways.
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Tue, 5 Dec 2017 21:48:30 +0000 (16:48 -0500)]
drm/amd/display: Clean up DCN cursor code
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Thu, 7 Dec 2017 15:42:33 +0000 (10:42 -0500)]
drm/amd/display: reprogram surface config on scaling change
When plane size changes, we need to reprogram surface pitch in addition
to viewport and scaler. This change is a conservative way to make this happen.
However it could be more optimized to move pitch programming into
mem_program_viewport.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Andrew Jiang <Andrew.Jiang@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Thu, 23 Nov 2017 21:38:52 +0000 (16:38 -0500)]
drm/amd/display: Remove dwbc from pipe_ctx
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hugo Hu [Thu, 7 Dec 2017 07:33:22 +0000 (15:33 +0800)]
drm/amd/display: Use the maximum link setting which EDP reported.
Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Wed, 6 Dec 2017 21:29:21 +0000 (16:29 -0500)]
drm/amd/display: Add hdr_supported flag
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Tue, 5 Dec 2017 15:51:35 +0000 (10:51 -0500)]
drm/amd/display: Update HUBP
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Tue, 5 Dec 2017 19:34:56 +0000 (14:34 -0500)]
drm/amd/display: dal 3.1.26
Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Andrew Jiang <Andrew.Jiang@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix rehook MST display not light back on
Original applied dm_restore_drm_connector_state() has got removed.
Set link status to BAD before hotplug() event could trigger
another modeset from userspace.
The fix "Fix MST daisy chain SST not light up" commit makes so it is trying
to create a stream prior to dc_sink. That makes dc_sink is not present in
create_stream_for_sink().
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Fri, 24 Nov 2017 20:43:05 +0000 (15:43 -0500)]
drm/amd/display: Fix check for whether dmcu fw is running
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 21 Nov 2017 18:19:04 +0000 (13:19 -0500)]
drm/amd/display: Do DC mode-change check after stream creation
Do DC level mode change checks (via dc_stream_state) only when creating
a new stream, as this check is uneccessary without a new dc_stream_state
anyways. Doing so better demonstrates the intent of this mode-change
check, in comparison to guarding it with the 'enable' flag.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 27 Nov 2017 21:12:43 +0000 (16:12 -0500)]
drm/amd/display: Don't spam debug log on long reg waits
Certain reg waits take up to a frame. Don't spam the log when this
happens.
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 27 Nov 2017 14:50:01 +0000 (09:50 -0500)]
drm/amd/display: Error print when ATOM BIOS implementation is missing
We fail apply_ctx_to_hw when crtc_source_select is missing. This isn't
really helpful at this point. It would aid ASIC bringup if we log an error
when we can't find the implementation for the ATOM version.
Do the same for all other function points in the command table that do a
NULL check before being called.
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 27 Nov 2017 14:30:48 +0000 (09:30 -0500)]
drm/amd/display: Remove dead enable_plane function definition and call
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 24 Nov 2017 14:11:23 +0000 (09:11 -0500)]
drm/amd/display: Print type if we get wrong ObjectID from bios
We've seen a bunch of issues where we can't get the connector from vbios
for what we think should be a valid connector id. Print some more info
when this happens.
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Wed, 20 Dec 2017 09:45:36 +0000 (10:45 +0100)]
drm/radeon: Remove KFD_CIK_SDMA_QUEUE_OFFSET
Leftover from recently removed amdkfd support.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Wed, 20 Dec 2017 09:45:36 +0000 (10:45 +0100)]
Revert "drm/radeon: reduce number of free VMIDs and pipes in KV"
This reverts the remaining changes of commit 62a7b7fbd08ef745bb51e8728e89125a0ba6327e, because radeon doesn't support
amdkfd anymore. The number of VMIDs was already changed back when amdkfd
support was removed.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>