Julian Wiedmann [Thu, 27 Jun 2019 15:01:33 +0000 (17:01 +0200)]
s390/qeth: move cast type selection into fill_header()
The cast type currently gets selected in .ndo_start_xmit, and is then
piped through several layers until it's stored into the HW header.
Push the selection down into qeth_l?_fill_header() to (1) reduce the
number of xmit-wide parameters, and (2) merge the two route validation
checks into just one.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Jun 2019 15:01:32 +0000 (17:01 +0200)]
s390/qeth: extract helper for route validation
As follow-up to commit 0cd6783d3c7d ("s390/qeth: check dst entry before use"),
consolidate the dst_check() logic into a single helper and add a wrapper
around the cast type selection.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Jun 2019 15:01:31 +0000 (17:01 +0200)]
s390/qeth: consolidate skb RX processing in L3 driver
Use napi_gro_receive() to pass up all types of packets that a L3 device
may receive.
1) For proper L2 packets received by the IQD sniffer, this is the
obvious thing to do.
2) For af_iucv (which doesn't provide a GRO assist), the GRO code will
transparently fall back to netif_receive_skb(). So there's no need to
special-case this traffic in our code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Jun 2019 15:01:30 +0000 (17:01 +0200)]
s390/qeth: consolidate pm code
De-duplicate the pm callback implementations from the two sub-drivers,
replacing them with core helpers that delegate to the .set_online and
.set_offline callbacks.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Jun 2019 15:01:29 +0000 (17:01 +0200)]
s390/qeth: streamline SNMP cmd code
Apply some cleanups to qeth_snmp_command() and its callback:
1. when accessing the user data, use the proper struct instead of
hard-coded offsets. Also copy the request data straight into the
allocated cmd, skipping the extra memdup_user() to a tmp buffer.
2. capping the request length is no longer needed, the same check gets
applied at a base level in qeth_alloc_cmd().
3. clean up some duplicated (and misindented) trace statements.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Now that all cmds are dynamically allocated, the code for static cmd
buffers can go away entirely. Resulting in a nice reduction of
code/data size & complexity, while removing the risk that
qeth_clear_cmd_buffers() releases cmds that are still in-flight.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Jun 2019 15:01:27 +0000 (17:01 +0200)]
s390/qeth: dynamically allocate MPC cmds
The base MPC cmds are the last remaining user of the static cmd buffers.
Port them over to use dynamic allocation, and stop backing the write
channel's cmd buffers with pages.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Jun 2019 15:01:26 +0000 (17:01 +0200)]
s390/qeth: dynamically allocate vnicc cmds
The VNICC code is somewhat quirky in that it defers the whole cmd setup
to a common helper qeth_l2_vnicc_request(). Some of the cmd specifics
are then passed in via parameter, while others are simply hard-coded.
Split the whole machinery up into the usual format: one helper that
allocates the cmd & fills in the common fields, while all the cmd
originators take care of their sub-cmd type specific work.
This makes it much easier to calculate the cmd's precise length, and
reduces code complexity.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Jun 2019 15:01:24 +0000 (17:01 +0200)]
s390/qeth: dynamically allocate various cmds with sub-types
This patch converts the adapter, assist and bridgeport cmd paths to
dynamic allocation. Most of the work is about re-organizing the cmd
headers, calculating the correct cmd length, and filling in the right
value in the sub-cmd's length field.
Since we now also set the correct length for cmds that are not reflected
by a fixed struct (ie SNMP), we can remove the work-around from
qeth_snmp_command().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Jun 2019 15:01:23 +0000 (17:01 +0200)]
s390/qeth: clarify parameter for simple assist cmds
For code that uses qeth_send_simple_setassparms_prot(), we currently
can't differentiate whether the cmd should contain (1) no parameter, or
(2) a 4-byte parameter with value 0.
At the moment this doesn't cause any trouble. But when using dynamically
allocated cmds, we need to know whether to allocate & transmit an
additional 4 bytes of zeroes.
So instead of the raw parameter value, pass a parameter pointer
(or NULL) to qeth_send_simple_setassparms_prot().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Jun 2019 15:01:22 +0000 (17:01 +0200)]
s390/qeth: dynamically allocate simple IPA cmds
This patch reduces the usage of the write channel's static cmd buffers,
by dynamically allocating all simple IPA cmds (eg. STARTLAN, SETVMAC).
It also converts the OSN path.
Doing so requires some changes to how we calculate the cmd length.
Currently when building IPA cmds, we're quite generous in how much data
we send down to the device (basically the size of the biggest cmd we
know). This is no real concern at the moment, since the static cmd
buffers are backed with zeroed pages. But for dynamic allocations, the
exact length matters. So this patch also adds the needed length
calculations to each cmd path.
Commands that have multiple subtypes (eg. SETADP) of differing length
will be converted with follow-up patches.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 27 Jun 2019 13:04:52 +0000 (15:04 +0200)]
net/smc: common release code for non-accepted sockets
There are common steps when releasing an accepted or unaccepted socket.
Move this code into a common routine.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq and Ran reported a regression caused by net-next commit 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list").
This happens when net.ipv4.conf.$dev.promote_secondaries sysctl is
enabled -- we can arrange for ifa->next to point at ifa, so next
process that tries to walk the list loops forever.
Fix this and extend rtnetlink.sh with a small test case for this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 27 Jun 2019 12:03:32 +0000 (14:03 +0200)]
net: ipv4: fix infinite loop on secondary addr promotion
secondary address promotion causes infinite loop -- it arranges
for ifa->ifa_next to point back to itself.
Problem is that 'prev_prom' and 'last_prim' might point at the same entry,
so 'last_sec' pointer must be obtained after prev_prom->next update.
Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list") Reported-by: Ran Rozenstein <ranro@mellanox.com> Reported-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethtool: Allow parsing ETHER_FLOW types when using flow_rule
When parsing an ethtool_rx_flow_spec, users can specify an ethernet flow
which could contain matches based on the ethernet header, such as the
MAC address, the VLAN tag or the ethertype.
ETHER_FLOW uses the src and dst ethernet addresses, along with the
ethertype as keys. Matches based on the vlan tag are also possible, but
they are specified using the special FLOW_EXT flag.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by: Pablo Neira Ayuso <pablo@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Jun 2019 21:09:33 +0000 (14:09 -0700)]
Merge branch 'macb-build-fixes'
Palmer Dabbelt says:
====================
net: macb: Fix compilation on systems without COMMON_CLK, v2
Our patch to add support for the FU540-C000 broke compilation on at
least powerpc allyesconfig, which was found as part of the linux-next
build regression tests. This must have somehow slipped through the
cracks, as the patch has been reverted in linux-next for a while now.
This patch applies on top of the offending commit, which is the only one
I've even tried it on as I'm not sure how this subsystem makes it to
Linus.
This patch set fixes the issue by adding a dependency of COMMON_CLK to
the MACB Kconfig entry, which avoids the build failure by disabling MACB
on systems where it wouldn't compile. All known users of MACB have
COMMON_CLK, so this shouldn't cause any issues. This is a significantly
simpler approach than disabling just the FU540-C000 support.
I've also included a second patch to indicate this is a driver for a
Cadence device that was originally written by an engineer at Atmel. The
only relation is that I stumbled across it when writing the first patch.
Changes since v1 <20190624061603.1704-1-palmer@sifive.com>:
* Disable MACB on systems without COMMON_CLK, instead of just disabling
the FU540-C000 support on these systems.
* Update the commit message to reflect the driver was written by Atmel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Palmer Dabbelt [Tue, 25 Jun 2019 08:48:28 +0000 (01:48 -0700)]
net: macb: Kconfig: Rename Atmel to Cadence
The help text makes it look like NET_VENDOR_CADENCE enables support for
Atmel devices, when in reality it's a driver written by Atmel that
supports Cadence devices. This may confuse users that have this device
on a non-Atmel SoC.
The fix is just s/Atmel/Cadence/, but I did go and re-wrap the Kconfig
help text as that change caused it to go over 80 characters.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Palmer Dabbelt [Tue, 25 Jun 2019 08:48:27 +0000 (01:48 -0700)]
net: macb: Kconfig: Make MACB depend on COMMON_CLK
commit c218ad559020 ("macb: Add support for SiFive FU540-C000") added a
dependency on the common clock framework to the macb driver, but didn't
express that dependency in Kconfig. As a result macb now fails to
compile on systems without COMMON_CLK, which specifically causes a build
failure on powerpc allyesconfig.
This patch adds the dependency, which results in the macb driver no
longer being selectable on systems without the common clock framework.
All known systems that have this device already support the common clock
framework, so this should not cause trouble for any uses. Supporting
both the FU540-C000 and systems without COMMON_CLK is quite ugly.
I've build tested this on powerpc allyesconfig and RISC-V defconfig
(which selects MACB), but I have not even booted the resulting kernels.
Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000") Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Taht [Sat, 22 Jun 2019 17:07:34 +0000 (10:07 -0700)]
Allow 0.0.0.0/8 as a valid address range
The longstanding prohibition against using 0.0.0.0/8 dates back
to two issues with the early internet.
There was an interoperability problem with BSD 4.2 in 1984, fixed in
BSD 4.3 in 1986. BSD 4.2 has long since been retired.
Secondly, addresses of the form 0.x.y.z were initially defined only as
a source address in an ICMP datagram, indicating "node number x.y.z on
this IPv4 network", by nodes that know their address on their local
network, but do not yet know their network prefix, in RFC0792 (page
19). This usage of 0.x.y.z was later repealed in RFC1122 (section
3.2.2.7), because the original ICMP-based mechanism for learning the
network prefix was unworkable on many networks such as Ethernet (which
have longer addresses that would not fit into the 24 "node number"
bits). Modern networks use reverse ARP (RFC0903) or BOOTP (RFC0951)
or DHCP (RFC2131) to find their full 32-bit address and CIDR netmask
(and other parameters such as default gateways). 0.x.y.z has had
16,777,215 addresses in 0.0.0.0/8 space left unused and reserved for
future use, since 1989.
This patch allows for these 16m new IPv4 addresses to appear within
a box or on the wire. Layer 2 switches don't care.
0.0.0.0/32 is still prohibited, of course.
Signed-off-by: Dave Taht <dave.taht@gmail.com> Signed-off-by: John Gilmore <gnu@toad.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 21 Jun 2019 23:27:16 +0000 (16:27 -0700)]
rtnetlink: skip metrics loop for dst_default_metrics
dst_default_metrics has all of the metrics initialized to 0, so nothing
will be added to the skb in rtnetlink_put_metrics. Avoid the loop if
metrics is from dst_default_metrics.
Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Jun 2019 20:05:42 +0000 (13:05 -0700)]
Merge branch 'skfp-cleanups'
Puranjay Mohan says:
====================
net: fddi: skfp: Use PCI generic definitions instead of private duplicates
This patch series removes the private duplicates of PCI definitions in
favour of generic definitions defined in pci_regs.h.
This driver only uses some of the generic PCI definitons,
which are included from pci_regs.h and thier private versions
are removed from skfbi.h with all other private defines.
The skfbi.h defines PCI_REV_ID and other private defines with different
names, these are renamed to Generic PCI names to make them
compatible with defines in pci_regs.h.
All unused defines are removed from skfbi.h.
Changes in v5:
Removed unused PCI definitions which were left in v4
Changes in v4:
Removed unused PCI definitions which were left in v3
Changes in v3:
Renamed all local PCI definitions to Generic names.
Corrected coding style mistakes.
Changes in v2:
Converted individual patches to a series.
Made sure that individual patches build correctly
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Jun 2019 17:12:17 +0000 (10:12 -0700)]
Merge tag 'wireless-drivers-next-for-davem-2019-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valu says:
====================
wireless-drivers-next patches for 5.3
First set of patches for 5.3, but not that many patches this time.
This pull request fails to compile with the tip tree due to
ktime_get_boot_ns() API changes there. It should be easy for Linus to
fix it in p54 driver once he pulls this, an example resolution here:
Jon Hunter [Wed, 26 Jun 2019 10:23:22 +0000 (11:23 +0100)]
net: stmmac: Fix crash observed if PHY does not support EEE
If the PHY does not support EEE mode, then a crash is observed when the
ethernet interface is enabled. The crash occurs, because if the PHY does
not support EEE, then although the EEE timer is never configured, it is
still marked as enabled and so the stmmac ethernet driver is still
trying to update the timer by calling mod_timer(). This triggers a BUG()
in the mod_timer() because we are trying to update a timer when there is
no callback function set because timer_setup() was never called for this
timer.
The problem is caused because we return true from the function
stmmac_eee_init(), marking the EEE timer as enabled, even when we have
not configured the EEE timer. Fix this by ensuring that we return false
if the PHY does not support EEE and hence, 'eee_active' is not set.
Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Hunter [Wed, 26 Jun 2019 10:23:21 +0000 (11:23 +0100)]
net: stmmac: Fix possible deadlock when disabling EEE support
When stmmac_eee_init() is called to disable EEE support, then the timer
for EEE support is stopped and we return from the function. Prior to
stopping the timer, a mutex was acquired but in this case it is never
released and so could cause a deadlock. Fix this by releasing the mutex
prior to returning from stmmax_eee_init() when stopping the EEE timer.
Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 1e47b4837f3b ("ipv6: Dump route exceptions if requested") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Weihang Li [Thu, 20 Jun 2019 08:52:45 +0000 (16:52 +0800)]
net: hns3: add exception handling when enable NIC HW error interrupts
If we failed to enable NIC HW error interrupts during client
initialization in some cases, we should do exception handling to clear
flags and free the resources.
Fixes: 00ea6e5fda9d ("net: hns3: delay and separate enabling of NIC and ROCE HW errors") Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 20 Jun 2019 08:52:44 +0000 (16:52 +0800)]
net: hns3: fixes wrong place enabling ROCE HW error when loading
The ROCE HW errors should only be enabled when initializing ROCE's
client, the current code enable it no matter initializing NIC or
ROCE client.
So this patch fixes it.
Fixes: 00ea6e5fda9d ("net: hns3: delay and separate enabling of NIC and ROCE HW errors") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 20 Jun 2019 08:52:43 +0000 (16:52 +0800)]
net: hns3: fix race conditions between reset and module loading & unloading
When loading or unloading module, it should wait for the reset task
done before it un-initializes the client, otherwise the reset task
may cause a NULL pointer reference.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Weihang Li [Thu, 20 Jun 2019 08:52:42 +0000 (16:52 +0800)]
net: hns3: add check to number of buffer descriptors
This patch adds check to number of bds before we allocate memory for
them. If we get an invalid bd num in some cases, it will cause a memory
overflow.
Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Weihang Li [Thu, 20 Jun 2019 08:52:41 +0000 (16:52 +0800)]
net: hns3: remove override_pci_need_reset
We add override_pci_need_reset to prevent redundant and unwanted PF
resets if a RAS error occurs in commit 69b51bbb03f7 ("net: hns3: fix
to stop multiple HNS reset due to the AER changes").
Now in HNS3 driver, we use hw_err_reset_req to record reset level that
we need to recover from a RAS error. This variable cans solve above
issue as override_pci_need_reset, so this patch removes
override_pci_need_reset.
Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Weihang Li [Thu, 20 Jun 2019 08:52:40 +0000 (16:52 +0800)]
net: hns3: modify handling of out of memory in hclge_err.c
Users should be informed if HNS driver failed to allocate memory for
descriptor when handling hw errors. This patch solve above issues.
Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Weihang Li [Thu, 20 Jun 2019 08:52:39 +0000 (16:52 +0800)]
net: hns3: code optimizaition of hclge_handle_hw_ras_error()
This patch optimizes hclge_handle_hw_ras_error() to make the code logic
clearer.
1. If there was no NIC or Roce RAS when we read
HCLGE_RAS_PF_OTHER_INT_STS_REG, we return directly.
2. Because NIC and Roce RAS may occurs at the same time, so we should
check value of revision at first before we handle Roce RAS instead
of only checking it in branch of no NIC RAS is detected.
3. Check HCLGE_STATE_RST_HANDLING each time before we want to return
PCI_ERS_RESULT_NEED_RESET.
4. Remove checking of HCLGE_RAS_REG_NFE_MASK and
HCLGE_RAS_REG_ROCEE_ERR_MASK because if hw_err_reset_req is not
zero, it proves that we have set it in handling of NIC or Roce RAS.
Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 20 Jun 2019 08:52:38 +0000 (16:52 +0800)]
net: hns3: restore the MAC autoneg state after reset
When doing global reset, the MAC autoneg state of fibre
port is set to default, which may cause user configuration
lost. This patch fixes it by restore the MAC autoneg state
after reset.
Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 20 Jun 2019 08:52:37 +0000 (16:52 +0800)]
net: hns3: sync VLAN filter entries when kill VLAN ID failed
When HW is resetting, firmware is unable to handle commands
from driver. So if remove VLAN device from stack at this time,
it will fail to remove the VLAN ID from HW VLAN filter, then
the VLAN filter status is unsynced with stack.
This patch fixes it by recording the VLAN ID delete failed,
and removes them again when reset complete.
Fixes: 44e626f720c3 ("net: hns3: fix VLAN offload handle for VLAN inserted by port") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For VF VLAN filter is disabled when VF VLAN table is full, then the
new VLAN ID won't be added into VF VLAN table, it will always print
fail log when remove these VLAN IDs. If user has added too many
VLANs, it will cause massive verbose print logs.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 20 Jun 2019 08:52:35 +0000 (16:52 +0800)]
net: hns3: fix selftest fail issue for fibre port with autoneg on
When doing selftest for fibre port with autoneg on, the MAC speed
may be incorrect, which may cause the selftest failed. This patch
fixes it by halting autoneg during the selftest.
Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Tue, 25 Jun 2019 16:08:13 +0000 (18:08 +0200)]
tipc: eliminate unnecessary skb expansion during retransmission
We increase the allocated headroom for the buffer copies to be
retransmitted. This eliminates the need for the lower stack levels
(UDP/IP/L2) to expand the headroom in order to add their own headers.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Tue, 25 Jun 2019 15:36:43 +0000 (17:36 +0200)]
tipc: simplify stale link failure criteria
In commit a4dc70d46cf1 ("tipc: extend link reset criteria for stale
packet retransmission") we made link retransmission failure events
dependent on the link tolerance, and not only of the number of failed
retransmission attempts, as we did earlier. This works well. However,
keeping the original, additional criteria of 99 failed retransmissions
is now redundant, and may in some cases lead to failure detection
times in the order of minutes instead of the expected 1.5 sec link
tolerance value.
We now remove this criteria altogether.
Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lucas Bates [Tue, 25 Jun 2019 01:00:27 +0000 (21:00 -0400)]
tc-testing: Restore original behaviour for namespaces in tdc
This patch restores the original behaviour for tdc prior to the
introduction of the plugin system, where the network namespace
functionality was split from the main script.
It introduces the concept of required plugins for testcases,
and will automatically load any plugin that isn't already
enabled when said plugin is required by even one testcase.
Additionally, the -n option for the nsPlugin is deprecated
so the default action is to make use of the namespaces.
Instead, we introduce -N to not use them, but still create
the veth pair.
buildebpfPlugin's -B option is also deprecated.
If a test cases requires the features of a specific plugin
in order to pass, it should instead include a new key/value
pair describing plugin interactions:
"plugins": {
"requires": "buildebpfPlugin"
},
A test case can have more than one required plugin: a list
can be inserted as the value for 'requires'.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com> Acked-by: Davide Caratti <dcaratti@redhat.com> Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Netfilter updates for net-next
The following patches contains Netfilter updates for net-next:
1) .br_defrag indirection depends on CONFIG_NF_DEFRAG_IPV6, from wenxu.
2) Remove unnecessary memset() in ipset, from Florent Fourcot.
3) Merge control plane addition and deletion in ipset, also from Florent.
4) A few missing check for nla_parse() in ipset, from Aditya Pakki
and Jozsef Kadlecsik.
5) Incorrect cleanup in error path of xt_set version 3, from Jozsef.
6) Memory accounting problems when resizing in ipset, from Stefano Brivio.
7) Jozsef updates his email to @netfilter.org, this batch comes with a
conflict resolution with recent SPDX header updates.
8) Add to create custom conntrack expectations via nftables, from
Stephane Veyret.
9) A lookup optimization for conntrack, from Florian Westphal.
10) Check for supported flags in xt_owner.
11) Support for pernet sysctl in br_netfilter, patches
from Christian Brauner.
12) Patches to move common synproxy infrastructure to nf_synproxy.c,
to prepare the synproxy support for nf_tables, patches from
Fernando Fernandez Mancera.
13) Support to restore expiration time in set element, from Laura Garcia.
14) Fix recent rewrite of netfilter IPv6 to avoid indirections
when CONFIG_IPV6 is unset, from Arnd Bergmann.
15) Always reset vlan tag on skbuff fraglist when refragmenting in
bridge conntrack, from wenxu.
16) Support to match IPv4 options in nf_tables, from Stephen Suryaputra.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ard Biesheuvel [Mon, 17 Jun 2019 08:43:38 +0000 (10:43 +0200)]
airo: switch to skcipher interface
The AIRO driver applies a ctr(aes) on a buffer of considerable size
(2400 bytes), and instead of invoking the crypto API to handle this
in its entirety, it open codes the counter manipulation and invokes
the AES block cipher directly.
Let's fix this, by switching to the sync skcipher API instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Add watchdog for rt2800 devices. For now it only detect hung
and print error.
[Note: I verified that printing messages from process context is
fine on MT7620 (WT3020) platform that have problem when printk
is called from interrupt context].
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
For mmio we do not properlly trace dma done Q_INDEX_DMA_DONE index
for TX queues. That would require implementing INT_SOURCE_CSR_*_DMA_DONE
interrupts, what is rather not worth to do due to adding extra
CPU load (small but still somewhat not necessary otherwise).
We can just read TX DMA done indexes from registers directly. What
will be used by watchdog.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This patch removes the error branch for (queue > dev->queues).
It is no longer needed anymore as the "queue" value is validated by
cfg80211's parse_txq_params() before the driver code gets called.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yan-Hsuan Chuang [Fri, 14 Jun 2019 07:24:14 +0000 (15:24 +0800)]
rtw88: rsvd page should go though management queue
The hardware default uses management queue to transmit frames that are
downloaded into reserved page, so we need to clearly assign the frames
to use qsel in TX_DESC_QSEL_MGMT to avoid using wrong queue.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yan-Hsuan Chuang [Fri, 14 Jun 2019 07:24:13 +0000 (15:24 +0800)]
rtw88: restore DACK results to save time
DACK is done right after the hardware has been turned on, which
means it will be done every time we leave the IDLE state.
But it takes ~2 seconds to finish DACK.
We can back up the results and restore them. And it only takes a few
milliseconds to restore the results to the hardware, saving a lot of
time.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yan-Hsuan Chuang [Fri, 14 Jun 2019 07:24:12 +0000 (15:24 +0800)]
rtw88: power on again if it was already on
We could fail to power on because it was already on. If the return
value is -EALREADY, power off and then power on again to turn on the
hardware as expected.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yan-Hsuan Chuang [Fri, 14 Jun 2019 07:24:10 +0000 (15:24 +0800)]
rtw88: 8822c: disable rx clock gating before counter reset
Driver Could fail to reset counter if rx clock gating is not disabled.
So we need to disable rx clock gating before resetting counters.
Otherwise counters may increase unexpected.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Chien-Hsun Liao [Fri, 14 Jun 2019 07:24:08 +0000 (15:24 +0800)]
rtw88: 8822c: add rf write protection when switching channel
Collision of writing rf registers could occur if the driver writes
rf registers by direct write while the hardware is writing other rf
registers by pi write simultaneously.
Hardware pi write can be triggered by rf calibrations sometimes, so
the driver can not always write rf registers by direct write
protection. Direct write protection can make sure that there is no
hardware pi write during the direct write.
According to some experiments, if we add direct write protection
when switching channel, the performance of rf calibration will not
be affected.
Signed-off-by: Chien-Hsun Liao <ben.liao@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Chin-Yen Lee [Fri, 14 Jun 2019 07:24:07 +0000 (15:24 +0800)]
rtw88: add beacon function setting
Add beacon function setting routines for each hardware port.
If beacon function is not enabled, the hardware is not able
to synchronize with AP's beacon and can miss the beacons
under some scenarios such as PS mode.
For AP and Adhoc modes that require to send beacons, do not
update the TSF, otherwise the beacon interval may be affected.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yan-Hsuan Chuang [Fri, 14 Jun 2019 07:24:06 +0000 (15:24 +0800)]
rtw88: add support for random mac scan
When driver uses random mac address to scan, the unicast probe response
will not be received because the addr1 is not matched. Configure port
address by requested mac address to receive probe response from AP.
To support random mac scan, we need to configure the mac address during
scan period to receive unicast prop_resp. After scan is completed,
configure the mac address back to the original one that the port used.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
iwlegacy: 4965: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. This driver was saving the debugfs file away to be
removed at a later time. However, the 80211 core would delete the whole
directory that the debugfs files are created in, after it asks the
driver to do the deletion, so just rely on the 80211 core to do all of
the cleanup for us, making us not need to keep a pointer to the dentries
around at all.
This cleans up the structure of the driver data a bit and makes the code
a tiny bit smaller.
Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
iwlegacy: 3945: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. This driver was saving the debugfs file away to be
removed at a later time. However, the 80211 core would delete the whole
directory that the debugfs files are created in, after it asks the
driver to do the deletion, so just rely on the 80211 core to do all of
the cleanup for us, making us not need to keep a pointer to the dentries
around at all.
This cleans up the structure of the driver data a bit and makes the code
a tiny bit smaller.
Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Sat, 8 Jun 2019 10:58:00 +0000 (11:58 +0100)]
rtlwifi: rtl8188ee: remove redundant assignment to rtstatus
Variable rtstatus is being initialized with a value that is never read
as rtstatus is being re-assigned a little later on. The assignment is
redundant and hence can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
mt7601u: fix possible memory leak when the device is disconnected
When the device is disconnected while passing traffic it is possible
to receive out of order urbs causing a memory leak since the skb linked
to the current tx urb is not removed. Fix the issue deallocating the skb
cleaning up the tx ring. Moreover this patch fixes the following kernel
warning
mt7601u: do not schedule rx_tasklet when the device has been disconnected
Do not schedule rx_tasklet when the usb dongle is disconnected.
Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb
can run concurrently with urb completion and we can unlink urbs from rx
ring in any order.
This patch fixes the common kernel warning reported when
the device is removed.
Colin Ian King [Thu, 30 May 2019 18:40:44 +0000 (19:40 +0100)]
rtlwifi: remove redundant assignment to variable badworden
The variable badworden is assigned with a value that is never read and
it is re-assigned a new value immediately afterwards. The assignment is
redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: syzbot+1fcc5ef45175fc774231@syzkaller.appspotmail.com Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Firmware can send invalid command response, the processing of
which can attempt to modify unexpected context and cause issues.
To fix this, driver should check that the command response ID is
same as the one it downloaded, and ignore processing of invalid
response.
Signed-off-by: Swati Kushwaha <swatiuma@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
In set_mac_address, driver check for interfaces with same bss_type
For first STA entry, this would return 3 interfaces since all priv's have
bss_type as 0 due to kzalloc. Thus mac address gets changed for STA
unexpected. This patch adds check for first STA and avoids mac address
change. This patch also adds mac_address change for p2p based on bss_num
type.
Signed-off-by: Sharvari Harisangam <sharvari@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Brian Norris [Tue, 4 Jun 2019 17:31:44 +0000 (10:31 -0700)]
mwifiex: print PCI mmap with %pK
Unadorned '%p' has restrictive policies these days, such that it usually
just prints garbage at early boot (see
Documentation/core-api/printk-formats.rst, "kernel will print
``(ptrval)`` until it gathers enough entropy"). Annotating with %pK
(for "kernel pointer") allows the kptr_restrict sysctl to control
printing policy better.
We might just as well drop this message entirely, but this fix was easy
enough for now.
Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Alan Stern [Mon, 20 May 2019 14:44:21 +0000 (10:44 -0400)]
p54usb: Fix race between disconnect and firmware loading
The syzbot fuzzer found a bug in the p54 USB wireless driver. The
issue involves a race between disconnect and the firmware-loader
callback routine, and it has several aspects.
One big problem is that when the firmware can't be loaded, the
callback routine tries to unbind the driver from the USB _device_ (by
calling device_release_driver) instead of from the USB _interface_ to
which it is actually bound (by calling usb_driver_release_interface).
The race involves access to the private data structure. The driver's
disconnect handler waits for a completion that is signalled by the
firmware-loader callback routine. As soon as the completion is
signalled, you have to assume that the private data structure may have
been deallocated by the disconnect handler -- even if the firmware was
loaded without errors. However, the callback routine does access the
private data several times after that point.
Another problem is that, in order to ensure that the USB device
structure hasn't been freed when the callback routine runs, the driver
takes a reference to it. This isn't good enough any more, because now
that the callback routine calls usb_driver_release_interface, it has
to ensure that the interface structure hasn't been freed.
Finally, the driver takes an unnecessary reference to the USB device
structure in the probe function and drops the reference in the
disconnect handler. This extra reference doesn't accomplish anything,
because the USB core already guarantees that a device structure won't
be deallocated while a driver is still bound to any of its interfaces.
To fix these problems, this patch makes the following changes:
Call usb_driver_release_interface() rather than
device_release_driver().
Don't signal the completion until after the important
information has been copied out of the private data structure,
and don't refer to the private data at all thereafter.
Lock udev (the interface's parent) before unbinding the driver
instead of locking udev->parent.
During the firmware loading process, take a reference to the
USB interface instead of the USB device.
Don't take an unnecessary reference to the device during probe
(and then don't drop it during disconnect).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+200d4bb11b23d929335f@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Resolve conflict between d2912cb15bdd ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 500") removing the GPL disclaimer
and fe03d4745675 ("Update my email address") which updates Jozsef
Kadlecsik's email.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
====================
cxgb4: Reference count MPS TCAM entries within a PF
Firmware reference counts the MPS TCAM entries by PF and VF,
but it does not do it for usage within a PF or VF. This patch
adds the support to track MPS TCAM entries within a PF.
v2->v3:
Fixed the compiler errors due to incorrect patch
Also, removed the new blank line at EOF
v1->v2:
Use refcount_t type instead of atomic_t for mps reference count
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Rangoju [Mon, 24 Jun 2019 17:35:32 +0000 (23:05 +0530)]
cxgb4: Re-work the logic for mps refcounting
Remove existing mps refcounting code which was
added only for encap filters and add necessary
data structures/functions to support mps reference
counting for all the mac filters. Also add wrapper
functions for allocating and freeing encap mac
filters.
Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Icenowy Zheng [Thu, 20 Jun 2019 13:47:44 +0000 (15:47 +0200)]
net: stmmac: sun8i: force select external PHY when no internal one
The PHY selection bit also exists on SoCs without an internal PHY; if it's
set to 1 (internal PHY, default value) then the MAC will not make use of
any PHY on such SoCs.
This problem appears when adapting for H6, which has no real internal PHY
(the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
connected via RMII interface at GPIO bank A).
Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
to address the problem of a wrong default value.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Icenowy Zheng [Thu, 20 Jun 2019 13:47:43 +0000 (15:47 +0200)]
net: stmmac: sun8i: add support for Allwinner H6 EMAC
The EMAC on Allwinner H6 is just like the one on A64. The "internal PHY" on
H6 is on a co-packaged AC200 chip, and it's not really internal (it's
connected via RMII at PA GPIO bank).
Add support for the Allwinner H6 EMAC in the dwmac-sun8i driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 24 Jun 2019 17:18:49 +0000 (10:18 -0700)]
Merge branch 'cached-route-listings'
Stefano Brivio says:
====================
Fix listing (IPv4, IPv6) and flushing (IPv6) of cached route exceptions
For IPv6 cached routes, the commands 'ip -6 route list cache' and
'ip -6 route flush cache' don't work at all after route exceptions have
been moved to a separate hash table in commit 2b760fcf5cfb ("ipv6: hook
up exception table to store dst cache").
For IPv4 cached routes, the command 'ip route list cache' has also
stopped working in kernel 3.5 after commit 4895c771c7f0 ("ipv4: Add FIB
nexthop exceptions.") introduced storage for route exceptions as a
separate entity.
Fix this by allowing userspace to clearly request cached routes with
the RTM_F_CLONED flag used as a filter (in conjuction with strict
checking) and by retrieving and dumping cached routes if requested.
If strict checking is not requested (iproute2 < 5.0.0), we don't have a
way to consistently filter results on other selectors (e.g. on tables),
so skip filtering entirely and dump both regular routes and exceptions.
For IPv4, cache flushing uses a completely different mechanism, so it
wasn't affected. Listing of exception routes (modified routes pre-3.5) was
tested against these versions of kernel and iproute2:
For IPv6, a separate iproute2 patch is required. Versions of iproute2
and kernel tested:
iproute2
kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 5.1.0, patched
3.18 list + + + + + +
flush + + + + + +
4.4 list + + + + + +
flush + + + + + +
4.9 list + + + + + +
flush + + + + + +
4.14 list + + + + + +
flush + + + + + +
4.15 list
flush
4.19 list
flush
5.0 list
flush
5.1 list
flush
with list + + + + + +
fix flush + + + +
v7: Make sure r->rtm_tos is initialised in 3/11, move loop over nexthop
objects in 4/11, add comments about usage of "skip" counters in commit
messages of 4/11 and 8/11
v6: Target for net-next, rebase and adapt to nexthop objects for IPv6 paths.
Merge selftests into this series (as they were addressed for net-next).
A number of minor changes detailed in logs of single patches.
v5: Skip filtering altogether if no strict checking is requested: selecting
routes or exceptions only would be inconsistent with the fact we can't
filter on tables. Drop 1/8 (non-strict dump filter function no longer
needed), replace 2/8 (don't use NLM_F_MATCH, decide to skip routes or
exceptions in filter function), drop 6/8 (2/8 is enough for IPv6 too).
Introduce dump_routes and dump_exceptions flags in filter, adapt other
patches to that.
v4: Fix the listing issue also for IPv4, making the behaviour consistent
with IPv6. Honour NLM_F_MATCH as per RFC 3549 and allow usage of
RTM_F_CLONED filter. Split patches into smaller logical changes.
v3: Drop check on RTM_F_CLONED and rework logic of return values of
rt6_dump_route()
v2: Add count of routes handled in partial dumps, and skip them, in patch 1/2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 21 Jun 2019 15:45:30 +0000 (17:45 +0200)]
selftests: pmtu: Make list_flush_ipv6_exception test more demanding
Instead of just listing and flushing two cached exceptions, create
a relatively big number of them, and count how many are listed. Single
netlink dump messages contain approximately 25 entries each, and this
way we can make sure the partial dump tracking mechanism is working
properly.
While at it, also ensure that no cached routes can be listed after
flush, and remove 'sleep 1' calls, they are not actually needed.
v7: No changes
v6:
- Merge this patch into series including fix, as it's also targeted
for net-next. No actual changes
Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 21 Jun 2019 15:45:28 +0000 (17:45 +0200)]
ip6_fib: Don't discard nodes with valid routing information in fib6_locate_1()
When we perform an inexact match on FIB nodes via fib6_locate_1(), longer
prefixes will be preferred to shorter ones. However, it might happen that
a node, with higher fn_bit value than some other, has no valid routing
information.
In this case, we'll pick that node, but it will be discarded by the check
on RTN_RTINFO in fib6_locate(), and we might miss nodes with valid routing
information but with lower fn_bit value.
This is apparent when a routing exception is created for a default route:
# ip -6 route list
fc00:1::/64 dev veth_A-R1 proto kernel metric 256 pref medium
fc00:2::/64 dev veth_A-R2 proto kernel metric 256 pref medium
fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 pref medium
fe80::/64 dev veth_A-R1 proto kernel metric 256 pref medium
fe80::/64 dev veth_A-R2 proto kernel metric 256 pref medium
default via fc00:1::2 dev veth_A-R1 metric 1024 pref medium
# ip -6 route list cache
fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 expires 593sec mtu 1500 pref medium
fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 593sec mtu 1500 pref medium
# ip -6 route flush cache # node for default route is discarded
Failed to send flush request: No such process
# ip -6 route list cache
fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 586sec mtu 1500 pref medium
Check right away if the node has a RTN_RTINFO flag, before replacing the
'prev' pointer, that indicates the longest matching prefix found so far.
Fixes: 38fbeeeeccdb ("ipv6: prepare fib6_locate() for exception table") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 21 Jun 2019 15:45:27 +0000 (17:45 +0200)]
ipv6: Dump route exceptions if requested
Since commit 2b760fcf5cfb ("ipv6: hook up exception table to store dst
cache"), route exceptions reside in a separate hash table, and won't be
found by walking the FIB, so they won't be dumped to userspace on a
RTM_GETROUTE message.
This causes 'ip -6 route list cache' and 'ip -6 route flush cache' to
have no function anymore:
# ip -6 route get fc00:3::1
fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 539sec mtu 1400 pref medium
# ip -6 route get fc00:4::1
fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 536sec mtu 1500 pref medium
# ip -6 route list cache
# ip -6 route flush cache
# ip -6 route get fc00:3::1
fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 520sec mtu 1400 pref medium
# ip -6 route get fc00:4::1
fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 519sec mtu 1500 pref medium
because iproute2 lists cached routes using RTM_GETROUTE, and flushes them
by listing all the routes, and deleting them with RTM_DELROUTE one by one.
If cached routes are requested using the RTM_F_CLONED flag together with
strict checking, or if no strict checking is requested (and hence we can't
consistently apply filters), look up exceptions in the hash table
associated with the current fib6_info in rt6_dump_route(), and, if present
and not expired, add them to the dump.
We might be unable to dump all the entries for a given node in a single
message, so keep track of how many entries were handled for the current
node in fib6_walker, and skip that amount in case we start from the same
partially dumped node.
When a partial dump restarts, as the starting node might change when
'sernum' changes, we have no guarantee that we need to skip the same
amount of in-node entries. Therefore, we need two counters, and we need to
zero the in-node counter if the node from which the dump is resumed
differs.
Note that, with the current version of iproute2, this only fixes the
'ip -6 route list cache': on a flush command, iproute2 doesn't pass
RTM_F_CLONED and, due to this inconsistency, 'ip -6 route flush cache' is
still unable to fetch the routes to be flushed. This will be addressed in
a patch for iproute2.
To flush cached routes, a procfs entry could be introduced instead: that's
how it works for IPv4. We already have a rt6_flush_exception() function
ready to be wired to it. However, this would not solve the issue for
listing.
Versions of iproute2 and kernel tested:
iproute2
kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 5.1.0, patched
3.18 list + + + + + +
flush + + + + + +
4.4 list + + + + + +
flush + + + + + +
4.9 list + + + + + +
flush + + + + + +
4.14 list + + + + + +
flush + + + + + +
4.15 list
flush
4.19 list
flush
5.0 list
flush
5.1 list
flush
with list + + + + + +
fix flush + + + +
v7:
- Explain usage of "skip" counters in commit message (suggested by
David Ahern)
v6:
- Rebase onto net-next, use recently introduced nexthop walker
- Make rt6_nh_dump_exceptions() a separate function (suggested by David
Ahern)
v5:
- Use dump_routes and dump_exceptions from filter, ignore NLM_F_MATCH,
update test results (flushing works with iproute2 < 5.0.0 now)
v4:
- Split NLM_F_MATCH and strict check handling in separate patches
- Filter routes using RTM_F_CLONED: if it's not set, only return
non-cached routes, and if it's set, only return cached routes:
change requested by David Ahern and Martin Lau. This implies that
iproute2 needs a separate patch to be able to flush IPv6 cached
routes. This is not ideal because we can't fix the breakage caused
by 2b760fcf5cfb entirely in kernel. However, two years have passed
since then, and this makes it more tolerable
v3:
- More descriptive comment about expired exceptions in rt6_dump_route()
- Swap return values of rt6_dump_route() (suggested by Martin Lau)
- Don't zero skip_in_node in case we don't dump anything in a given pass
(also suggested by Martin Lau)
- Remove check on RTM_F_CLONED altogether: in the current UAPI semantic,
it's just a flag to indicate the route was cloned, not to filter on
routes
v2: Add tracking of number of entries to be skipped in current node after
a partial dump. As we restart from the same node, if not all the
exceptions for a given node fit in a single message, the dump will
not terminate, as suggested by Martin Lau. This is a concrete
possibility, setting up a big number of exceptions for the same route
actually causes the issue, suggested by David Ahern.
Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 2b760fcf5cfb ("ipv6: hook up exception table to store dst cache") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 21 Jun 2019 15:45:26 +0000 (17:45 +0200)]
ipv6/route: Change return code of rt6_dump_route() for partial node dumps
In the next patch, we are going to add optional dump of exceptions to
rt6_dump_route().
Change the return code of rt6_dump_route() to accomodate partial node
dumps: we might dump multiple routes per node, and might be able to dump
only a given number of them, so fib6_dump_node() will need to know how
many routes have been dumped on partial dump, to restart the dump from the
point where it was interrupted.
Note that fib6_dump_node() is the only caller and already handles all
non-negative return codes as success: those become -1 to signal that we're
done with the node. If we fail, return 0, as we were unable to dump the
single route in the node, but we're not done with it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 21 Jun 2019 15:45:25 +0000 (17:45 +0200)]
ipv6/route: Don't match on fc_nh_id if not set in ip6_route_del()
If fc_nh_id isn't set, we shouldn't try to match against it. This
actually matters just for the RTF_CACHE below (where this case is
already handled): if iproute2 gets a route exception and tries to
delete it, it won't reference it by fc_nh_id, even if a nexthop
object might be associated to the originating route.
Fixes: 5b98324ebe29 ("ipv6: Allow routes to use nexthop objects") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>