ALSA: hda: Fix race between creating and refreshing sysfs entries
hda_widget_sysfs_reinit() can free underlying codec->widgets structure
on which widget_tree_create() operates. Add locking to prevent such
issues from happening.
Jeremy Soller [Fri, 10 May 2019 14:15:07 +0000 (10:15 -0400)]
ALSA: hda/realtek - Corrected fixup for System76 Gazelle (gaze14)
A mistake was made in the identification of the four variants of the
System76 Gazelle (gaze14). This patch corrects the PCI ID of the
17-inch, GTX 1660 Ti variant from 0x8560 to 0x8551. This patch also
adds the correct fixups for the 15-inch and 17-inch GTX 1650 variants
with PCI IDs 0x8560 and 0x8561.
Tests were done on all four variants ensuring full audio capability.
Realtek codec driver applied the COEF setups to change the EAPD
control to the default mode (i.e. control by EPAD verbs) at the init
callback. It works, but this is too excessive at the same time, since
it's called at each runtime PM resume. That is, the initialization
should be done only once after the probe. One may think that moving
this to the probe should be OK, but no -- there is a catch; when a
system resumes from S4 (hibernation), we need to re-initialize this
again manually, because it's out of regcache restoration.
This patch addresses the issue by introducing alc_pre_init() function
that performs such a task. This is called from each codec probe
function, and it's called from the resume callback conditionally only
from S4 resume.
Reported-and-tested-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 9 May 2019 05:13:40 +0000 (07:13 +0200)]
Merge tag 'asoc-v5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.2
A bunch of driver specific fixes that came in since the initial pull
request for v5.2, mainly warning fixes for the newly added Sound Open
Firmware code which people appeared to only start looking at after I'd
sent the pull request.
Takashi Iwai [Wed, 8 May 2019 13:01:24 +0000 (15:01 +0200)]
ALSA: line6: toneport: Fix broken usage of timer for delayed execution
The line6 toneport driver has code for some delayed initialization,
and this hits the kernel Oops because mutex and other sleepable
functions are used in the timer callback. Fix the abuse by a delayed
work instead so that everything works gracefully.
Takashi Iwai [Wed, 8 May 2019 12:45:38 +0000 (14:45 +0200)]
ALSA: aica: Fix a long-time build breakage
The build of aica sound driver has been broken since the timer API
conversion and some code rewrite. This patch fixes the breakage by
using the common substream field, as well as a bit cleaning up wrt the
timer handling in the code.
Fixes: d522bb6a105f ("ALSA: sh: aica: Convert timers to use timer_setup()") Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kailang Yang [Wed, 8 May 2019 08:27:03 +0000 (16:27 +0800)]
ALSA: hda/realtek - Support low power consumption for ALC256
Remove hp_pin = 0 return. Add the default pin 0x21 as headphone.
Supported low power consumption, it must do depop procedure when
headset jack was plugged or unplugged.
So, alc256_init() and alc256_shutup() must run delay when headset jack
was plugged or unplugged.
If depop procedure not run with delay, it will have a chance to let
power consumption raise high.
[ NOTE: this is a quite quite similar change for ALC295 by commit d3ba58bb8959 ("ALSA: hda/realtek - Support low power consumption for
ALC295"), but applied to ALC256 codec instead -- tiwai ]
Fixes: 8983eb602af5 ("ALSA: hda/realtek - Move to ACT_INIT state") Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 8 May 2019 08:29:31 +0000 (10:29 +0200)]
Merge tag 'asoc-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.2
A bunch of driver specific fixes that came in since the initial pull
request for v5.2, mainly warning fixes for the newly added Sound Open
Firmware code which people appeared to only start looking at after I'd
sent the pull request.
Olivier Moysan [Mon, 6 May 2019 12:54:11 +0000 (14:54 +0200)]
ASoC: stm32: i2s: update pcm hardware constraints
- Set period minimum size. Ensure at least 5ms period
up to 48kHz/16 bits to prevent underrun/overrun.
- Remove MDMA constraints on period maximum size and
set period maximum to half the buffer maximum size.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Libin Yang [Tue, 7 May 2019 06:33:11 +0000 (14:33 +0800)]
ASoC: codec: hdac_hdmi: no checking monitor in hw_params
Some userspace apps, like pulseaudio, may call open, hw_params,
prepare to judge whether the pcm is ready or not. Current hdac_hdmi
will return -ENODEV if monitor is not connected, which will cause
the apps believe the pcm is not ready. Actually PCM for hdmi is ready,
even the monitor is not connected.
This patch removes the check of monitor presence in hw_params, just like
what the legacy HD-Audio driver does.
Signed-off-by: Libin Yang <libin.yang@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih [Tue, 7 May 2019 10:12:19 +0000 (18:12 +0800)]
ASoC: mediatek: mt6358: save output volume for mixer controls
Output volume settings from mixer controls would be lost.
Imagine that "Headphone Volume" has set to -10dB via amixer:
- in mtk_hp_enable()
- hp_store_gain() saves the volume setting -10dB from regmap_read()
to ana_gain[AUDIO_ANALOG_VOLUME_HPOUTL]
- headset_volume_ramp() ramps up from -10dB to -10dB
- in mtk_hp_disable()
- headset_volume_ramp() ramps down from -10dB to -40dB
Next time in mtk_hp_enable(), hp_store_gain() would save -40dB but
not -10dB. As a result, headset_volume_ramp() would ramp from -10dB to
-40dB (which is mute).
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih [Tue, 7 May 2019 10:12:18 +0000 (18:12 +0800)]
ASoC: mediatek: mt6358: initialize setting when ramping volume
Mt6358 ramps up from the smallest volume (i.e. -10dB) to target dB when
opening and ramps down from target dB to mute (i.e. -40dB) when closing.
If target is equal to -10dB when opening, headset_volume_ramp() simply
leaves current setting (which may not be -10dB) unchanged.
Execute the loop at least once to initialize the setting to the
starting point (i.e. from).
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code mistakenly uses IS_ENABLED in C code instead of as
in conditional compilation, leading to the following error:
ld: sound/soc/sof/core.o: in function `sof_machine_check':
sound/soc/sof/core.c:279: undefined reference to `sof_nocodec_setup'
Fix by using #if !IS_ENABLED()
Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The SND_SOC_INTEL_COMMON Kconfig was removed months ago from SOF
Kconfig files but is still selected instead of the correct
SND_SOC_SOF_INTEL_COMMON kconfig which does select xtensa stuff,
leading to the following errors.
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x120): undefined reference
to `sof_xtensa_arch_ops'
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x180): undefined reference
to `sof_xtensa_arch_ops'
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x1e0): undefined reference
to `sof_xtensa_arch_ops'
Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes a compile warning below by properly handling the error code
from sof_get_ctrl_copy_params():
include/linux/kernel.h:843:43: warning: 'sparams.pl_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
sound/soc/sof/ipc.c:639:34: note: 'sparams.pl_size' was declared here
The function returns an error before setting sparams.pl_size, so it'd
assign an uninitialized value at a later point.
Fixes: 53e0c72d98ba ("ASoC: SOF: Add support for IPC IO between DSP and Host") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
Jeremy Soller [Tue, 7 May 2019 21:11:08 +0000 (17:11 -0400)]
ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14)
On the System76 Gazelle (gaze14), there is a headset microphone input
attached to 0x1a that does not have a jack detect. In order to get it
working, the pin configuration needs to be set correctly, and the
ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is
identical to the patch already applied for the System76 Darter Pro
(darp5).
Signed-off-by: Jeremy Soller <jeremy@system76.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kailang Yang [Mon, 6 May 2019 07:09:42 +0000 (15:09 +0800)]
ALSA: hda/realtek - Support low power consumption for ALC295
Enter to close more power control widgets at suspend.
Remove hp_pin check. Add the default pin 0x21 as headphone.
Supported low power consumption, it must do depop procedure when
headset jack was plugged or unplugged.
So, alc225_init() and alc225_shutup() must run delay when headset
jack was plugged or unplugged.
If depop procedure not run with delay, it will have a chance to let
power consumption raise high.
[ A few compile fixes by tiwai ]
Fixes: 8983eb602af5 ("ALSA: hda/realtek - Move to ACT_INIT state") Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 6 May 2019 15:02:24 +0000 (17:02 +0200)]
ASoC: rockchip: Fix an uninitialized variable compile warning
Paper over a trivial case leading to an uninitialized variable compile
warning:
sound/soc/rockchip/rockchip_pdm.c:179:3: warning: ‘clk_out’ may be used uninitialized in this function [-Wmaybe-uninitialized]
Fixes: 624e8e00acaf ("ASoC: rockchip: pdm: fixup pdm fractional div") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 6 May 2019 15:02:22 +0000 (17:02 +0200)]
ASoC: da7219: Fix a compile warning at CONFIG_COMMON_CLK=n
A trivial fix for the randconfig build error:
sound/soc/codecs/da7219.c:2366:6: warning: unused variable ‘i’ [-Wunused-variable]
Fixes: d90ba6c8b53e ("ASoC: da7219: Expose BCLK and WCLK control through CCF") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
Fix kconfig warning for unmet dependency for IOSF_MBI when
PCI is not set/enabled. Fixes this warning:
WARNING: unmet direct dependencies detected for IOSF_MBI
Depends on [n]: PCI [=n]
Selected by [y]:
- SND_SOC_SOF_ACPI [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] && (ACPI [=y] || COMPILE_TEST [=n]) && X86 [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
- Set period minimum size. Ensure at least 5ms period
up to 48kHz/16 bits to prevent underrun/overrun.
- Remove MDMA constraints on period maximum size and
set period maximum to half the buffer maximum size.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Jon Hunter [Wed, 1 May 2019 14:29:38 +0000 (15:29 +0100)]
ASoC: max98090: Fix restore of DAPM Muxes
The max98090 driver defines 3 DAPM muxes; one for the right line output
(LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux)
and one for the right headphone mixer source (MIXHPRSEL Mux). The same
bit is used for the mux as well as the DAPM enable, and although the mux
can be correctly configured, after playback has completed, the mux will
be reset during the disable phase. This is preventing the state of these
muxes from being saved and restored correctly on system reboot. Fix this
by marking these muxes as SND_SOC_NOPM.
Note this has been verified this on the Tegra124 Nyan Big which features
the MAX98090 codec.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
Curtis Malainey [Fri, 3 May 2019 19:32:14 +0000 (12:32 -0700)]
ASoC: RT5677-SPI: Disable 16Bit SPI Transfers
The current algorithm allows 3 types of transfers, 16bit, 32bit and
burst. According to Realtek, 16bit transfers have a special restriction
in that it is restricted to the memory region of
0x18020000 ~ 0x18021000. This region is the memory location of the I2C
registers. The current algorithm does not uphold this restriction and
therefore fails to complete writes.
Since this has been broken for some time it likely no one is using it.
Better to simply disable the 16 bit writes. This will allow users to
properly load firmware over SPI without data corruption.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Reviewed-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
Hui Wang [Mon, 6 May 2019 14:09:32 +0000 (22:09 +0800)]
ALSA: hda/hdmi - Consider eld_valid when reporting jack event
On the machines with AMD GPU or Nvidia GPU, we often meet this issue:
after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting
even there is no any monitors plugged.
When this problem happens, we check the /proc/asound/cardX/eld#N.M, we
will find the monitor_present=1, eld_valid=0.
The root cause is BIOS or GPU driver makes the PRESENCE valid even no
monitor plugged, and of course the driver will not get the valid
eld_data subsequently.
In this situation, we should not report the jack_plugged event, to do
so, let us change the function hdmi_present_sense_via_verbs(). In this
function, it reads the pin_sense via snd_hda_pin_sense(), after
calling this function, the jack_dirty is 0, and before exiting
via_verbs(), we change the shadow pin_sense according to both
monitor_present and eld_valid, then in the snd_hda_jack_report_sync(),
since the jack_dirty is still 0, it will report jack event according
to this modified shadow pin_sense.
After this change, the driver will not report Jack_is_plugged event
through hdmi_present_sense_via_verbs() if monitor_present is 1 and
eld_valid is 0.
Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hui Wang [Mon, 6 May 2019 14:09:31 +0000 (22:09 +0800)]
ALSA: hda/hdmi - Read the pin sense from register when repolling
The driver will check the monitor presence when resuming from suspend,
starting poll or interrupt triggers. In these 3 situations, the
jack_dirty will be set to 1 first, then the hda_jack.c reads the
pin_sense from register, after reading the register, the jack_dirty
will be set to 0. But hdmi_repoll_work() is enabled in these 3
situations, It will read the pin_sense a couple of times subsequently,
since the jack_dirty is 0 now, It does not read the register anymore,
instead it uses the shadow pin_sense which is read at the first time.
It is meaningless to check the shadow pin_sense a couple of times,
we need to read the register to check the real plugging state, so
we set the jack_dirty to 1 in the hdmi_repoll_work().
Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 6 May 2019 14:14:09 +0000 (16:14 +0200)]
Merge tag 'asoc-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.2
This is a pretty huge set of changes, it's been a pretty active release
all round but the big thing with this release is the Sound Open Firmware
changes from Intel, providing another DSP framework for use with the
DSPs in their SoCs. This one works with the firmware of the same name
which is free software (unlike the previous DSP firmwares and framework)
and there has been some interest in adoption by other systems already so
hopefully we will see adoption by other vendors in the future.
Other highlights include:
- Support for MCLK/sample rate ratio setting in the generic cards.
- Support for pin switches in the generic cards.
- A big set of improvements to the TLV320AIC32x4 drivers from Annaliese
McDermond.
- New drivers for Freescale audio mixers, several Intel machines,
several Mediatek machines, Meson G12A, Sound Open Firmware and
Spreadtrum compressed audio and DMA devices.
Baolin Wang [Fri, 12 Apr 2019 06:40:17 +0000 (14:40 +0800)]
ASoC: sprd: Add reserved DMA memory support
For Spreadtrum audio platform driver, it need allocate a larger DMA buffer
dynamically to copy audio data between userspace and kernel space, but that
will increase the risk of memory allocation failure especially the system
is under heavy load situation.
To make sure the audio can work in this scenario, we usually reserve one
region of memory to be used as a shared pool of DMA buffers for the
platform component. So add of_reserved_mem_device_init_by_idx() function
to initialize the shared pool of DMA buffers to be used by the platform
component.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Dan Carpenter [Mon, 6 May 2019 12:51:19 +0000 (15:51 +0300)]
ALSA: synth: emux: soundfont.c: divide by zero in calc_gus_envelope_time()
This function is called from load_guspatch() and the rate is specified
by the user. If they accidentally selected zero then it would crash the
kernel. I've just changed the zero to a one.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Sun, 5 May 2019 21:37:25 +0000 (14:37 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"I'd like to apologize for this very late pull request: I was dithering
through the week whether to send the fixes, and then yesterday Jiri's
crash fix for a regression introduced in this cycle clearly marked
perf/urgent as 'must merge now'.
Most of the commits are tooling fixes, plus there's three kernel fixes
via four commits:
- race fix in the Intel PEBS code
- fix an AUX bug and roll back a previous attempt
- fix AMD family 17h generic HW cache-event perf counters
The largest diffstat contribution comes from the AMD fix - a new event
table is introduced, which is a fairly low risk change but has a large
linecount"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix race in intel_pmu_disable_event()
perf/x86/intel/pt: Remove software double buffering PMU capability
perf/ring_buffer: Fix AUX software double buffering
perf tools: Remove needless asm/unistd.h include fixing build in some places
tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv
tools build: Add -ldl to the disassembler-four-args feature test
perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet
perf cs-etm: Don't check cs_etm_queue::prev_packet validity
perf report: Report OOM in status line in the GTK UI
perf bench numa: Add define for RUSAGE_THREAD if not present
tools lib traceevent: Change tag string for error
perf annotate: Fix build on 32 bit for BPF annotation
tools uapi x86: Sync vmx.h with the kernel
perf bpf: Return value with unlocking in perf_env__find_btf()
MAINTAINERS: Include vendor specific files under arch/*/events/*
perf/x86/amd: Update generic hardware cache events for Family 17h
Linus Torvalds [Sun, 5 May 2019 21:26:11 +0000 (14:26 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Disable function tracing during early SME setup to fix a boot crash on
SME-enabled kernels running distro kernels (some of which have
function tracing enabled)"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/mem_encrypt: Disable all instrumentation for early SME setup
Linus Torvalds [Sun, 5 May 2019 16:28:45 +0000 (09:28 -0700)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
- a couple of ->i_link use-after-free fixes
- regression fix for wrong errno on absent device name in mount(2)
(this cycle stuff)
- ancient UFS braino in large GID handling on Solaris UFS images (bogus
cut'n'paste from large UID handling; wrong field checked to decide
whether we should look at old (16bit) or new (32bit) field)
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour
Abort file_remove_privs() for non-reg. files
[fix] get rid of checking for absent device name in vfs_get_tree()
apparmorfs: fix use-after-free on symlink traversal
securityfs: fix use-after-free on symlink traversal
Jiri Olsa [Sat, 4 May 2019 15:15:56 +0000 (17:15 +0200)]
perf/x86/intel: Fix race in intel_pmu_disable_event()
New race in x86_pmu_stop() was introduced by replacing the
atomic __test_and_clear_bit() of cpuc->active_mask by separate
test_bit() and __clear_bit() calls in the following commit:
3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler")
The race causes panic for PEBS events with enabled callchains:
The event is configured to make samples from PEBS drain code,
but when it's disabled, we'll go through NMI path instead,
where data->callchain will not get allocated and we'll crash:
Linus Torvalds [Fri, 3 May 2019 23:49:46 +0000 (16:49 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- PPC and ARM bugfixes from submaintainers
- Fix old Windows versions on AMD (recent regression)
- Fix old Linux versions on processors without EPT
- Fixes for LAPIC timer optimizations
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: nVMX: Fix size checks in vmx_set_nested_state
KVM: selftests: make hyperv_cpuid test pass on AMD
KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer
KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size
x86/kvm/mmu: reset MMU context when 32-bit guest switches PAE
KVM: x86: Whitelist port 0x7e for pre-incrementing %rip
Documentation: kvm: fix dirty log ioctl arch lists
KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit
KVM: arm/arm64: Don't emulate virtual timers on userspace ioctls
kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP
KVM: arm/arm64: Ensure vcpu target is unset on reset failure
KVM: lapic: Convert guest TSC to host time domain if necessary
KVM: lapic: Allow user to disable adaptive tuning of timer advancement
KVM: lapic: Track lapic timer advance per vCPU
KVM: lapic: Disable timer advancement if adaptive tuning goes haywire
x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012
KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short
KVM: PPC: Book3S: Protect memslots while validating user address
KVM: PPC: Book3S HV: Perserve PSSCR FAKE_SUSPEND bit on guest exit
KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs
...
Linus Torvalds [Fri, 3 May 2019 18:42:01 +0000 (11:42 -0700)]
Merge branch 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C driver bugfixes and a MAINTAINERS update for you"
* 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: Prevent runtime suspend of adapter when Host Notify is required
i2c: synquacer: fix enumeration of slave devices
MAINTAINERS: friendly takeover of i2c-gpio driver
i2c: designware: ratelimit 'transfer when suspended' errors
i2c: imx: correct the method of getting private data in notifier_call
Linus Torvalds [Fri, 3 May 2019 15:55:06 +0000 (08:55 -0700)]
Merge tag 'clk-fixes-for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two fixes for the NKMP clks on Allwinner SoCs, a locking fix for
clkdev where we forgot to hold a lock while iterating a list that can
change, and finally a build fix that adds some stubs for clk APIs that
are used by devfreq drivers on platforms without the clk APIs"
* tag 'clk-fixes-for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Add missing stubs for a few functions
clkdev: Hold clocks_mutex while iterating clocks list
clk: sunxi-ng: nkmp: Explain why zero width check is needed
clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)
Linus Torvalds [Fri, 3 May 2019 15:42:03 +0000 (08:42 -0700)]
Merge tag 'sound-5.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few stable fixes at this round.
The USB Line6 audio fixes are a bit large, but they are rather trivial
and pretty much device-specific, so should be safe to apply at this
late stage. Ditto for other HD-audio quirks"
* tag 'sound-5.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR
ALSA: line6: use dynamic buffers
ALSA: hda/realtek - Fixed Dell AIO speaker noise
ALSA: hda/realtek - Add new Dell platform for headset mode
Ross Zwisler [Thu, 2 May 2019 17:27:00 +0000 (11:27 -0600)]
MAINTAINERS: update git tree for sound entries
Several sound related entries in MAINTAINERS refer to the old git tree
at "git://git.alsa-project.org/alsa-kernel.git". This is no longer used
for development, and Takashi Iwai's kernel.org tree is used instead.
Now that all AUX allocations are high-order by default, the software
double buffering PMU capability doesn't make sense any more, get rid
of it. In case some PMUs choose to opt out, we can re-introduce it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf/ring_buffer: Fix AUX software double buffering
This recent commit:
5768402fd9c6e87 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically")
overlooked the fact that the previous one page granularity of the AUX buffer
provided an implicit double buffering capability to the PMU driver, which
went away when the entire buffer became one high-order page.
Always make the full-trace mode AUX allocation at least two-part to preserve
the previous behavior and allow the implicit double buffering to continue.
Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Fixes: 5768402fd9c6e87 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") Link: http://lkml.kernel.org/r/20190503085536.24119-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mac Chiang [Thu, 2 May 2019 06:12:04 +0000 (14:12 +0800)]
ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSE
On kbl_rt5663_max98927, commit 38a5882e4292
("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE")
This key pair mapping to play/pause when playing Youtube
The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.
For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.
Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec
The same fix is required on Chrome kbl_da7219_max98357a.
Signed-off-by: Mac Chiang <mac.chiang@intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The machine driver is a generic machine driver for SOF with rt5682
codec. it currently supports BYT/CHT/ICL/CML. Depending on the SOC
hdmi/speaker and DMIC support are added dynamically.
Only add information related to SOF since the machine driver was
only tested with SOF.
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Rander Wang [Tue, 30 Apr 2019 22:37:42 +0000 (17:37 -0500)]
ASoC: Intel: skl_hda_dsp_generic: add DMIC support
Add dmic dai links using naming conventions used in
previous machine drivers.
Tested on whiskylake & icelake with SOF driver. Due
to a missing topology file, the DMIC functionality
could not be tested with the Skylake driver but was
tested for non-regressions on a GeminiLake platform
without DMICs.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Pan Xiuli [Tue, 30 Apr 2019 23:09:34 +0000 (18:09 -0500)]
ASoC: SOF: Intel: CNL: add ipc dump function
Add ipc dump function to CNL+ platforms.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Pan Xiuli [Tue, 30 Apr 2019 23:09:33 +0000 (18:09 -0500)]
ASoC: SOF: Intel: APL: add ipc dump function
Add IPC dump function for APL plaform
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Pan Xiuli [Tue, 30 Apr 2019 23:09:32 +0000 (18:09 -0500)]
ASoC: SOF: IPC: add ipc dump function
Dump IPC status when IPC timed out. IPC status is platform specific and
need bind to plaform.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: intel: hda: add hw_params_upon_resume flag for hda stream
The prepare() ioctl for BE dai link gets called both
when the stream is started and when it is resumed from
suspend. SOF uses this ioctl to set the hw params
again only if the stream has been suspended.
When the stream is started, the hw_params ioctl gets called
before prepare() and hw_params is set for the BE dai link.
So the prepare call does not need to do anything further.
When the stream resumes after system suspend, SOF requires
that the hw_params be set again for the BE dai. In order
to determine which streams should set the hw params
during prepare(), an internal flag called "hw_params_upon_resume"
is introduced in struct sof_intel_hda_stream. The flag is set
for hda streams when the sof device suspends and is
cleared after hw_params is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Keyon Jie [Tue, 30 Apr 2019 23:09:30 +0000 (18:09 -0500)]
ASoC: SOF: Intel: hda-stream: handle real stream interrupts only
The stream and IPC share the same interrupt. The stream interrupt
handler mistakenly uses the ipc interrupt and return IRQ_HANDLED,
causing the ipc interrupt to be missed.
Make sure the stream interrupt handler only deals with stream-related
interrupts.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Keyon Jie [Tue, 30 Apr 2019 23:09:29 +0000 (18:09 -0500)]
ASoC: SOF: Intel: hda-stream: store stream capabilities
Add stream_max into struct sof_intel_hda_dev to store the total hda
stream number that the platform can support, and initialize it at
stream_init.
This can be used later e.g. for stream bitmask.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Keyon Jie [Tue, 30 Apr 2019 23:09:28 +0000 (18:09 -0500)]
ASoC: SOF: Intel: hda-ipc: simplify handling of IPC IRQ
When using a shared IRQ between IPC interrupt and stream IOC interrupt,
the interrupt handlers need to check the interrupt source before
scheduling their respective IRQ threads. In the case of IPC handler, it
should check if it is an IPC interrupt before waking up the IPC IRQ
thread.
The IPC IRQ thread, once scheduled, does not need to check the IRQ
source again. So, remove the superfluous check in the thread. Remove the
irq_status field from snd_sof_dev struct also as it is no longer needed.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Keyon Jie [Tue, 30 Apr 2019 23:09:27 +0000 (18:09 -0500)]
ASoC: SOF: ipc: use snd_sof_pcm_period_elapsed
Switch to a wrapper function which schedules the actual call of
snd_pcm_period_elapsed after the current IPC is completed.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Keyon Jie [Tue, 30 Apr 2019 23:09:26 +0000 (18:09 -0500)]
ASoC: SOF: Intel: use snd_sof_pcm_period_elapsed
Switch to a wrapper function which schedules the actual call of
snd_pcm_period_elapsed after the current IPC is completed.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Keyon Jie [Tue, 30 Apr 2019 23:09:25 +0000 (18:09 -0500)]
ASoC: SOF: PCM: add period_elapsed work to fix race condition in interrupt context
The IPC implementation in SOF requires sending IPCs serially: we should
not send a new IPC command to the firmware before we get an ACK (or time
out) from firmware, and the IRQ processing is complete.
snd_pcm_period_elapsed() can be called in interrupt context before
IRQ_HANDLED is returned. When the PCM is done draining, a STOP
IPC will then be sent, which breaks the expectation that IPCs are
handled serially and leads to IPC timeouts.
This patch adds a workqueue to defer the call to snd_pcm_elapsed() after
the IRQ is handled.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: Intel: hda: set I2S slave before enabling DSP
By default, the I2S ports are configured in master mode during
DSP powerup sequences, the FS and BCLK lines will be driven on
startup, even when the topology file explicitly requires the
SSP to be slave.
This may be problematic for external components configured in
master mode who don't expect the Intel SOC/PCH to drive. Fix by
configuring the SSP as slave before the SSP outputs are enabled
to avoid this transient behavior.
When the topology file configures the SSP as clock master, the
initial slave configuration will be overridden.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Keyon Jie [Tue, 30 Apr 2019 23:09:19 +0000 (18:09 -0500)]
ASoC: SOF: Intel: cnl: add pointer ops to use DPIB position
Add .pcm_pointer ops for cannonlake to read DPIB/posbuf and get pointer
for ALSA, to align with apollolake.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: add Kconfig option for strict ABI checks
When the kernel is more recent than firmware files, it will always
behave in backwards-compatible ways.
Add optional behavior to check if the kernel is older than the
firmware files, so that the kernel fails early instead of attempting
to use new functionality it does not support.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Ross Zwisler [Mon, 29 Apr 2019 18:25:17 +0000 (12:25 -0600)]
ASoC: Intel: avoid Oops if DMA setup fails
Currently in sst_dsp_new() if we get an error return from sst_dma_new()
we just print an error message and then still complete the function
successfully. This means that we are trying to run without sst->dma
properly set up, which will result in NULL pointer dereference when
sst->dma is later used. This was happening for me in
sst_dsp_dma_get_channel():
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: sst_dsp_dma_get_channel+0x4f/0x125 [snd_soc_sst_firmware]
Fix this by adding proper error handling for the case where we fail to
set up DMA.
This change only affects Haswell and Broadwell systems. Baytrail
systems explicilty opt-out of DMA via sst->pdata->resindex_dma_base
being set to -1.
Signed-off-by: Ross Zwisler <zwisler@google.com> Cc: stable@vger.kernel.org Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: hdmi-codec: stream is already locked in hw_params
startup() should have run before hw_params() is called, so the
current_substream pointer should already be properly set. There
is no reason to call hdmi_codec_new_stream() again in the
hw_params() callback
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Thu, 2 May 2019 11:33:40 +0000 (12:33 +0100)]
ASoC: SOF: remove redundant null checks of dai
Currently there are two null checks of pointer dai in function
sof_connect_dai_widget and yet there is no null check of dai
at the end of the function when checking !dai->name. The latter
would be a null pointer deference if dai is null (as picked up
by static analysis), however the function is only ever called
when dai is successfully allocated, so the null checks are
redundant. Clean up the code by removing the null checks.
Addresses-Coverity: ("Dereference after null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
A stream may specify a rate range using 'rate_min' and 'rate_max', so a
stream may be valid and not specify any rates. However, as stream cannot
be valid and not have any channel. Let's use this condition instead to
determine if a stream is valid or not.
Fixes: cde79035c6cf ("ASoC: Handle multiple codecs with split playback / capture") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: hdmi-codec: unlock the device on startup errors
If the hdmi codec startup fails, it should clear the current_substream
pointer to free the device. This is properly done for the audio_startup()
callback but for snd_pcm_hw_constraint_eld().
Make sure the pointer cleared if an error is reported.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Yu-Hsuan Hsu [Thu, 2 May 2019 04:07:43 +0000 (12:07 +0800)]
ASoC: da7219: Update the support rate list
If we want to set rate to 64000 on da7219, it fails and returns
"snd_pcm_hw_params: Invalid argument".
We should remove 64000 from support rate list because it is not
available.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Ingo Molnar [Fri, 3 May 2019 05:48:18 +0000 (07:48 +0200)]
Merge tag 'perf-urgent-for-mingo-5.1-20190502' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
tools UAPI:
Arnaldo Carvalho de Melo:
- Sync x86's vmx.h with the kernel.
- Copy missing unistd.h headers for arc, hexagon and riscv, fixing
a reported build regression on the ARC 32-bit architecture.
perf bench numa:
Arnaldo Carvalho de Melo:
- Add define for RUSAGE_THREAD if not present, fixing the build on the
ARC architecture when only zlib and libnuma are present.
perf BPF:
Arnaldo Carvalho de Melo:
- The disassembler-four-args feature test needs -ldl on distros such as
Mageia 7.
Bo YU:
- Fix unlocking on success in perf_env__find_btf(), detected with
the coverity tool.
libtraceevent:
Leo Yan:
- Change misleading hard coded 'trace-cmd' string in error messages.
ARM hardware tracing:
Leo Yan:
- Always allocate memory for cs_etm_queue::prev_packet, fixing a segfault
when processing CoreSight perf data.
perf annotate:
Thadeu Lima de Souza Cascardo:
- Fix build on 32 bit for BPF.
perf report:
Thomas Richter:
- Report OOM in status line in the GTK UI.
core libs:
- Remove needless asm/unistd.h that, used with sys/syscall.h ended
up redefining the syscalls defines in environments such as the
ARC arch when using uClibc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf tools: Remove needless asm/unistd.h include fixing build in some places
We were including sys/syscall.h and asm/unistd.h, since sys/syscall.h
includes asm/unistd.h, sometimes this leads to the redefinition of
defines, breaking the build.
Noticed on ARC with uCLibc.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-xjpf80o64i2ko74aj2jih0qg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv
Since those were introduced in:
c8ce48f06503 ("asm-generic: Make time32 syscall numbers optional")
But when the asm-generic/unistd.h was sync'ed with tools/ in:
1a787fc5ba18 ("tools headers uapi: Sync copy of asm-generic/unistd.h with the kernel sources")
I forgot to copy the files for the architectures that define
__ARCH_WANT_TIME32_SYSCALLS, so the perf build was breaking there, as
reported by Vineet Gupta for the ARC architecture.
After updating my ARC container to use the glibc based toolchain + cross
building libnuma, zlib and elfutils, I finally managed to reproduce the
problem and verify that this now is fixed and will not regress as will
be tested before each pull req sent upstream.
Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> CC: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20190426193531.GC28586@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools build: Add -ldl to the disassembler-four-args feature test
Thomas Backlund reported that the perf build was failing on the Mageia 7
distro, that is because it uses:
cat /tmp/build/perf/feature/test-disassembler-four-args.make.output
/usr/bin/ld: /usr/lib64/libbfd.a(plugin.o): in function `try_load_plugin':
/home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:243:
undefined reference to `dlopen'
/usr/bin/ld:
/home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:271:
undefined reference to `dlsym'
/usr/bin/ld:
/home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:256:
undefined reference to `dlclose'
/usr/bin/ld:
/home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:246:
undefined reference to `dlerror'
as we allow dynamic linking and loading
Reported-by: Thomas Backlund <tmb@mageia.org> Tested-by: Thomas Backlund <tmb@mageia.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lkml.kernel.org/r/20190501173158.GC21436@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Sun, 28 Apr 2019 08:32:27 +0000 (16:32 +0800)]
perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet
Robert Walker reported a segmentation fault is observed when process
CoreSight trace data; this issue can be easily reproduced by the command
'perf report --itrace=i1000i' for decoding tracing data.
If neither the 'b' flag (synthesize branches events) nor 'l' flag
(synthesize last branch entries) are specified to option '--itrace',
cs_etm_queue::prev_packet will not been initialised. After merging the
code to support exception packets and sample flags, there introduced a
number of uses of cs_etm_queue::prev_packet without checking whether it
is valid, for these cases any accessing to uninitialised prev_packet
will cause crash.
As cs_etm_queue::prev_packet is used more widely now and it's already
hard to follow which functions have been called in a context where the
validity of cs_etm_queue::prev_packet has been checked, this patch
always allocates memory for cs_etm_queue::prev_packet.
Reported-by: Robert Walker <robert.walker@arm.com> Suggested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki K Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Fixes: 7100b12cf474 ("perf cs-etm: Generate branch sample for exception packet") Fixes: 24fff5eb2b93 ("perf cs-etm: Avoid stale branch samples when flush packet") Link: http://lkml.kernel.org/r/20190428083228.20246-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since cs_etm_queue::prev_packet is allocated for all cases, it will
never be NULL pointer; now validity checking prev_packet is pointless,
remove all of them.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki K Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190428083228.20246-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The GUI always fails in the FINISHED_ROUND event (68) and does not
indicate the reason why.
When happened is the following. Perf report calls a lot of functions and
down deep when a FINISHED_ROUND event is processed, these functions are
called:
Now this functions runs out of memory and
returns -ENOMEM. This is reported all the way up
until function
perf_session__process_event() returns to its caller, where -ENOMEM is
changed to -EINVAL and processing stops:
if ((skip = perf_session__process_event(session, event, head)) < 0) {
pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n",
head, event->header.size, event->header.type);
err = -EINVAL;
goto out_err;
}
This occurred in the FINISHED_ROUND event when it has to process some
10000 entries and ran out of memory.
This patch indicates the root cause and displays it in the status line
of ther perf report GUI.
Output before (on GUI status line):
0xf4198 [0x8]: failed to process type: 68
Output after:
0xf4198 [0x8]: failed to process type: 68 [not enough memory]
Committer notes:
the 'skip' variable needs to be initialized to -EINVAL, so that when the
size is less than sizeof(struct perf_event_attr) we avoid this valid
compiler warning:
util/session.c: In function ‘perf_session__process_events’:
util/session.c:1936:7: error: ‘skip’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
err = skip;
~~~~^~~~~~
util/session.c:1874:6: note: ‘skip’ was declared here
s64 skip;
^~~~
cc1: all warnings being treated as errors
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20190423105303.61683-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf bench numa: Add define for RUSAGE_THREAD if not present
While cross building perf to the ARC architecture on a fedora 30 host,
we were failing with:
CC /tmp/build/perf/bench/numa.o
bench/numa.c: In function ‘worker_thread’:
bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’?
getrusage(RUSAGE_THREAD, &rusage);
^~~~~~~~~~~~~
SIGEV_THREAD
bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in
[perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1
arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
[perfbuilder@60d5802468f6 perf]$
Trying to reproduce a report by Vineet, I noticed that, with just
cross-built zlib and numactl libraries, I ended up with the above
failure.
So, since RUSAGE_THREAD is available as a define, check for that and
numactl libraries, I ended up with the above failure.
So, since RUSAGE_THREAD is available as a define in the system headers,
check if it is defined in the 'perf bench numa' sources and define it if
not.
Now it builds and I have to figure out if the problem reported by Vineet
only takes place if we have libelf or some other library available.
Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Wed, 24 Apr 2019 01:38:02 +0000 (09:38 +0800)]
tools lib traceevent: Change tag string for error
The traceevent lib is used by the perf tool, and when executing
perf test -v 6
it outputs error log on the ARM64 platform:
running test 33 '*:*'trace-cmd: No such file or directory
[...]
trace-cmd: Invalid argument
The trace event parsing code originally came from trace-cmd so it keeps
the tag string "trace-cmd" for errors, this easily introduces the
impression that the perf tool launches trace-cmd command for trace event
parsing, but in fact the related parsing is accomplished by the
traceevent lib.
This patch changes the tag string to "libtraceevent" so that we can
avoid confusion and let users to more easily connect the error with
traceevent lib.
perf annotate: Fix build on 32 bit for BPF annotation
Commit 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") adds
support for BPF programs annotations but the new code does not build on 32-bit.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Song Liu <songliubraving@fb.com> Fixes: 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") Link: http://lkml.kernel.org/r/20190403194452.10845-1-cascardo@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2b27924bb1d4 ("KVM: nVMX: always use early vmcs check when EPT is disabled")
That causes this object in the tools/perf build process to be rebuilt:
CC /tmp/build/perf/arch/x86/util/kvm-stat.o
But it isn't using VMX_ABORT_ prefixed constants, so no change in
behaviour.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/n/tip-bjbo3zc0r8i8oa0udpvftya6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bo YU [Mon, 22 Apr 2019 08:01:38 +0000 (04:01 -0400)]
perf bpf: Return value with unlocking in perf_env__find_btf()
In perf_env__find_btf(), we're returning without unlocking
"env->bpf_progs.lock". There may be cause lockdep issue.
Detected by CoversityScan, CID# 1444762:(program hangs(LOCK))
Signed-off-by: Bo YU <tsu.yubo@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Fixes: 2db7b1e0bd49d: (perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf()) Link: http://lkml.kernel.org/r/20190422080138.10088-1-tsu.yubo@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
1) Out of bounds access in xfrm IPSEC policy unlink, from Yue Haibing.
2) Missing length check for esp4 UDP encap, from Sabrina Dubroca.
3) Fix byte order of RX STBC access in mac80211, from Johannes Berg.
4) Inifnite loop in bpftool map create, from Alban Crequy.
5) Register mark fix in ebpf verifier after pkt/null checks, from Paul
Chaignon.
6) Properly use rcu_dereference_sk_user_data in L2TP code, from Eric
Dumazet.
7) Buffer overrun in marvell phy driver, from Andrew Lunn.
8) Several crash and statistics handling fixes to bnxt_en driver, from
Michael Chan and Vasundhara Volam.
9) Several fixes to the TLS layer from Jakub Kicinski (copying negative
amounts of data in reencrypt, reencrypt frag copying, blind nskb->sk
NULL deref, etc).
10) Several UDP GRO fixes, from Paolo Abeni and Eric Dumazet.
11) PID/UID checks on ipv6 flow labels are inverted, from Willem de
Bruijn.
12) Use after free in l2tp, from Eric Dumazet.
13) IPV6 route destroy races, also from Eric Dumazet.
14) SCTP state machine can erroneously run recursively, fix from Xin
Long.
15) Adjust AF_PACKET msg_name length checks, add padding bytes if
necessary. From Willem de Bruijn.
16) Preserve skb_iif, so that forwarded packets have consistent values
even if fragmentation is involved. From Shmulik Ladkani.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
udp: fix GRO packet of death
ipv6: A few fixes on dereferencing rt->from
rds: ib: force endiannes annotation
selftests: fib_rule_tests: print the result and return 1 if any tests failed
ipv4: ip_do_fragment: Preserve skb_iif during fragmentation
net/tls: avoid NULL pointer deref on nskb->sk in fallback
selftests: fib_rule_tests: Fix icmp proto with ipv6
packet: validate msg_namelen in send directly
packet: in recvmsg msg_name return at least sizeof sockaddr_ll
sctp: avoid running the sctp state machine recursively
stmmac: pci: Fix typo in IOT2000 comment
Documentation: fix netdev-FAQ.rst markup warning
ipv6: fix races in ip6_dst_destroy()
l2ip: fix possible use-after-free
appletalk: Set error code if register_snap_client failed
net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc
rxrpc: Fix net namespace cleanup
ipv6/flowlabel: wait rcu grace period before put_pid()
vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach
tcp: add sanity tests in tcp_add_backlog()
...
Linus Torvalds [Thu, 2 May 2019 16:55:04 +0000 (09:55 -0700)]
Merge tag 'for-linus-20190502' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"This is mostly io_uring fixes/tweaks. Most of these were actually done
in time for the last -rc, but I wanted to ensure that everything
tested out great before including them. The code delta looks larger
than it really is, as it's mostly just comment additions/changes.
Outside of the comment additions/changes, this is mostly removal of
unnecessary barriers. In all, this pull request contains:
- Tweak to how we handle errors at submission time. We now post a
completion event if the error occurs on behalf of an sqe, instead
of returning it through the system call. If the error happens
outside of a specific sqe, we return the error through the system
call. This makes it nicer to use and makes the "normal" use case
behave the same as the offload cases. (me)
- Fix for a missing req reference drop from async context (me)
- If an sqe is submitted with RWF_NOWAIT, don't punt it to async
context. Return -EAGAIN directly, instead of using it as a hint to
do async punt. (Stefan)
- Fix notes on barriers (Stefan)
- Remove unnecessary barriers (Stefan)
- Fix potential double free of memory in setup error (Mark)
- Further improve sq poll CPU validation (Mark)
- Fix page allocation warning and leak on buffer registration error
(Mark)
- Fix iov_iter_type() for new no-ref flag (Ming)
- Fix a case where dio doesn't honor bio no-page-ref (Ming)"
* tag 'for-linus-20190502' of git://git.kernel.dk/linux-block:
io_uring: avoid page allocation warnings
iov_iter: fix iov_iter_type
block: fix handling for BIO_NO_PAGE_REF
io_uring: drop req submit reference always in async punt
io_uring: free allocated io_memory once
io_uring: fix SQPOLL cpu validation
io_uring: have submission side sqe errors post a cqe
io_uring: remove unnecessary barrier after unsetting IORING_SQ_NEED_WAKEUP
io_uring: remove unnecessary barrier after incrementing dropped counter
io_uring: remove unnecessary barrier before reading SQ tail
io_uring: remove unnecessary barrier after updating SQ head
io_uring: remove unnecessary barrier before reading cq head
io_uring: remove unnecessary barrier before wq_has_sleeper
io_uring: fix notes on barriers
io_uring: fix handling SQEs requesting NOWAIT
Jarkko Nikula [Tue, 30 Apr 2019 14:23:22 +0000 (17:23 +0300)]
i2c: Prevent runtime suspend of adapter when Host Notify is required
Multiple users have reported their Synaptics touchpad has stopped
working between v4.20.1 and v4.20.2 when using SMBus interface.
The culprit for this appeared to be commit c5eb1190074c ("PCI / PM: Allow
runtime PM without callback functions") that fixed the runtime PM for
i2c-i801 SMBus adapter. Those Synaptics touchpad are using i2c-i801
for SMBus communication and testing showed they are able to get back
working by preventing the runtime suspend of adapter.
Normally when i2c-i801 SMBus adapter transmits with the client it resumes
before operation and autosuspends after.
However, if client requires SMBus Host Notify protocol, what those
Synaptics touchpads do, then the host adapter must not go to runtime
suspend since then it cannot process incoming SMBus Host Notify commands
the client may send.
Fix this by keeping I2C/SMBus adapter active in case client requires
Host Notify.
Reported-by: Keijo Vaara <ferdasyn@rocketmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=203297 Fixes: c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Keijo Vaara <ferdasyn@rocketmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The I2C host driver for SynQuacer fails to populate the of_node and
ACPI companion fields of the struct i2c_adapter it instantiates,
resulting in enumeration of the subordinate I2C bus to fail.
Fixes: 0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang [Thu, 25 Apr 2019 14:35:55 +0000 (16:35 +0200)]
MAINTAINERS: friendly takeover of i2c-gpio driver
I haven't heard from Haavard in years despite putting him to the CC list for
i2c-gpio related mails. Since I was doing the work on this driver for a while
now, let me take official maintainership, so it will be more clear to users.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Haavard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>