Guo Ren [Mon, 27 Jan 2020 11:57:29 +0000 (19:57 +0800)]
csky: Optimize abiv2 copy_to_user_page with VM_EXEC
Only when vma is for VM_EXEC, we need sync dcache & icache. eg:
- gdb ptrace modify user space instruction code area.
Add VM_EXEC condition to reduce unnecessary cache flush.
The abiv1 cpus' cache are all VIPT, so we still need to deal with
dcache aliasing problem. But there is optimized way to use cache
color, just like what's done in arch/csky/abiv1/inc/abi/page.h.
Guo Ren [Sun, 26 Jan 2020 17:20:36 +0000 (01:20 +0800)]
csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860)
Instead of flushing cache per update_mmu_cache() called, we use
flush_dcache_page to reduce the frequency of flashing the cache.
As abiv2 cpus are all PIPT for icache & dcache, we needn't handle
dcache aliasing problem. But their icache can't snoop dcache, so
we still need sync_icache_dcache in update_mmu_cache().
Guo Ren [Wed, 22 Jan 2020 03:15:14 +0000 (11:15 +0800)]
csky: Support icache flush without specific instructions
Some CPUs don't support icache specific instructions to flush icache
lines in broadcast way. We use cpu control registers to flush local
icache and use IPI to notify other cores.
Guo Ren [Tue, 17 Dec 2019 03:12:55 +0000 (11:12 +0800)]
csky: Set regs->usp to kernel sp, when the exception is from kernel
In the past, we didn't care about kernel sp when saving pt_reg. But in some
cases, we still need pt_reg->usp to represent the kernel stack before enter
exception.
For cmpxhg in atomic.S, we need save and restore usp for above.
Guo Ren [Mon, 30 Dec 2019 07:53:37 +0000 (15:53 +0800)]
csky/mm: Fixup export invalid_pte_table symbol
There is no present bit in csky pmd hardware, so we need to prepare invalid_pte_table
for empty pmd entry and the functions (pmd_none & pmd_present) in pgtable.h need
invalid_pte_talbe to get result. If a module use these functions, we need export the
symbol for it.
Guo Ren [Sun, 1 Dec 2019 14:34:19 +0000 (22:34 +0800)]
csky: Separate fixaddr_init from highmem
After fixaddr_init is separated from highmem, we could use tcm
without highmem selected. (610 (abiv1) don't support highmem,
but it could use tcm now.)
Guo Ren [Wed, 27 Nov 2019 00:44:33 +0000 (08:44 +0800)]
csky: Tightly-Coupled Memory or Sram support
The implementation are not only used by TCM but also used by sram on
SOC bus. It follow existed linux tcm software interface, so that old
tcm application codes could be re-used directly.
Software interface list in asm/tcm.h:
- Variables/Const: __tcmdata, __tcmconst
- Functions: __tcmfunc, __tcmlocalfunc
- Malloc/Free: tcm_alloc, tcm_free
In linux menuconfig:
- Choose a TCM contain instrctions + data or separated in ITCM/DTCM.
- Determine TCM_BASE (DTCM_BASE) in phyiscal address.
- Determine size of TCM or ITCM(DTCM) in page counts.
Here is hello tcm example from Documentation/arm/tcm.rst which could
be directly used:
Mao Han [Fri, 11 Oct 2019 02:56:55 +0000 (10:56 +0800)]
csky: Initial stack protector support
This is a basic -fstack-protector support without per-task canary
switching. The protector will report something like when stack
corruption is detected:
It's tested with strcpy local array overflow in sys_kill and get:
stack-protector: Kernel stack is corrupted in: sys_kill+0x23c/0x23c
TODO:
- Support task switch for different cannary
Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
ext4: fix potential race between s_group_info online resizing and access
During an online resize an array of pointers to s_group_info gets replaced
so it can get enlarged. If there is a concurrent access to the array in
ext4_get_group_info() and this memory has been reused then this can lead to
an invalid memory access.
Theodore Ts'o [Sat, 15 Feb 2020 21:40:37 +0000 (16:40 -0500)]
ext4: fix potential race between online resizing and write operations
During an online resize an array of pointers to buffer heads gets
replaced so it can get enlarged. If there is a racing block
allocation or deallocation which uses the old array, and the old array
has gotten reused this can lead to a GPF or some other random kernel
memory getting modified.
Dave Airlie [Fri, 21 Feb 2020 02:46:54 +0000 (12:46 +1000)]
Merge tag 'drm-intel-fixes-2020-02-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.6-rc3:
- Workaround missing Display Stream Compression (DSC) state readout by
forcing modeset when its enabled at probe
- Fix EHL port clock voltage level requirements
- Fix queuing retire workers on the virtual engine
- Fix use of partially initialized waiters
- Stop using drm_pci_alloc/drm_pci/free
- Fix rewind of RING_TAIL by forcing a context reload
- Fix locking on resetting ring->head
- Propagate our bug filing URL change to stable kernels
Dave Airlie [Fri, 21 Feb 2020 02:30:23 +0000 (12:30 +1000)]
Merge tag 'drm-misc-fixes-2020-02-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.6-rc3:
- Fix dt binding for sunxi.
- Allow only 1 rotation argument, and allow 0 rotation in video cmdline.
- Small compiler warning fix for panfrost.
- Fix when using performance counters in panfrost when using per fd address space.
Vasundhara Volam [Thu, 20 Feb 2020 22:26:35 +0000 (17:26 -0500)]
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
If crashed kernel does not shutdown the NIC properly, PCIe FLR
is required in the kdump kernel in order to initialize all the
functions properly.
Fixes: d629522e1d66 ("bnxt_en: Reduce memory usage when running in kdump kernel.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Thu, 20 Feb 2020 22:26:34 +0000 (17:26 -0500)]
bnxt_en: Improve device shutdown method.
Especially when bnxt_shutdown() is called during kexec, we need to
disable MSIX and disable Bus Master to completely quiesce the device.
Make these 2 calls unconditionally in the shutdown method.
Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: netlink: cap max groups which will be considered in netlink_bind()
Since nl_groups is a u32 we can't bind more groups via ->bind
(netlink_bind) call, but netlink has supported more groups via
setsockopt() for a long time and thus nlk->ngroups could be over 32.
Recently I added support for per-vlan notifications and increased the
groups to 33 for NETLINK_ROUTE which exposed an old bug in the
netlink_bind() code causing out-of-bounds access on archs where unsigned
long is 32 bits via test_bit() on a local variable. Fix this by capping the
maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively
capping them at 32 which is the minimum of allocated groups and the
maximum groups which can be bound via netlink_bind().
CC: Christophe Leroy <christophe.leroy@c-s.fr> CC: Richard Guy Briggs <rgb@redhat.com> Fixes: 4f520900522f ("netlink: have netlink per-protocol bind function return an error code.") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tim Harvey [Wed, 19 Feb 2020 23:19:36 +0000 (15:19 -0800)]
net: thunderx: workaround BGX TX Underflow issue
While it is not yet understood why a TX underflow can easily occur
for SGMII interfaces resulting in a TX wedge. It has been found that
disabling/re-enabling the LMAC resolves the issue.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Robert Jones <rjones@gateworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Wed, 19 Feb 2020 22:59:42 +0000 (14:59 -0800)]
ionic: fix fw_status read
The fw_status field is only 8 bits, so fix the read. Also,
we only want to look at the one status bit, to allow for future
use of the other bits, and watch for a bad PCI read.
Fixes: 97ca486592c0 ("ionic: add heartbeat check") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 20 Feb 2020 23:15:16 +0000 (15:15 -0800)]
Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA fixes from Mimi Zohar:
"Two bug fixes and an associated change for each.
The one that adds SM3 to the IMA list of supported hash algorithms is
a simple change, but could be considered a new feature"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add sm3 algorithm to hash algorithm configuration list
crypto: rename sm3-256 to sm3 in hash_algo_name
efi: Only print errors about failing to get certs if EFI vars are found
x86/ima: use correct identifier for SetupMode variable
Roman Kiryanov [Wed, 19 Feb 2020 21:40:06 +0000 (13:40 -0800)]
net: disable BRIDGE_NETFILTER by default
The description says 'If unsure, say N.' but
the module is built as M by default (once
the dependencies are satisfied).
When the module is selected (Y or M), it enables
NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS
which alter kernel internal structures.
We (Android Studio Emulator) currently do not
use this module and think this it is more consistent
to have it disabled by default as opposite to
disabling it explicitly to prevent enabling
NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS.
Signed-off-by: Roman Kiryanov <rkir@google.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
at91ether_init was handling the phy mode and speed but since the switch to
phylink, the NCFGR register got overwritten by macb_mac_config(). The issue
is that the RM9200_RMII bit and the MACB_CLK_DIV32 field are cleared
but never restored as they conflict with the PAE, GBE and PCSSEL bits.
Add new capability to differentiate between EMAC and the other versions of
the IP and use it to set and avoid clearing the relevant bits.
Also, this fixes a NULL pointer dereference in macb_mac_link_up as the EMAC
doesn't use any rings/bufffers/queues.
Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Masami Hiramatsu [Thu, 20 Feb 2020 12:19:42 +0000 (21:19 +0900)]
bootconfig: Print array as multiple commands for legacy command line
Print arraied values as multiple same options for legacy
kernel command line. With this rule, if the "kernel.*" and
"init.*" array entries in bootconfig are printed out as
multiple same options, e.g.
Remove error message silent knob, we don't need it anymore
because we can check if there is a bootconfig by checking
the magic word.
If there is a magic word, but failed to load a bootconfig
from initrd, there is a real problem.
Masami Hiramatsu [Thu, 20 Feb 2020 12:18:42 +0000 (21:18 +0900)]
bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.
The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.
Masami Hiramatsu [Mon, 17 Feb 2020 09:52:39 +0000 (18:52 +0900)]
tracing: Clear trace_state when starting trace
Clear trace_state data structure when starting trace
in __synth_event_trace_start() internal function.
Currently trace_state is initialized only in the
synth_event_trace_start() API, but the trace_state
in synth_event_trace() and synth_event_trace_array()
are on the stack without initialization.
This means those APIs will see wrong parameters and
wil skip closing process in __synth_event_trace_end()
because trace_state->disabled may be !0.
tracing: Disable trace_printk() on post poned tests
The tracing seftests checks various aspects of the tracing infrastructure,
and one is filtering. If trace_printk() is active during a self test, it can
cause the filtering to fail, which will disable that part of the trace.
To keep the selftests from failing because of trace_printk() calls,
trace_printk() checks the variable tracing_selftest_running, and if set, it
does not write to the tracing buffer.
As some tracers were registered earlier in boot, the selftest they triggered
would fail because not all the infrastructure was set up for the full
selftest. Thus, some of the tests were post poned to when their
infrastructure was ready (namely file system code). The postpone code did
not set the tracing_seftest_running variable, and could fail if a
trace_printk() was added and executed during their run.
Cc: stable@vger.kernel.org Fixes: 9afecfbb95198 ("tracing: Postpone tracer start-up tests till the system is more robust") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
tracing: Have synthetic event test use raw_smp_processor_id()
The test code that tests synthetic event creation pushes in as one of its
test fields the current CPU using "smp_processor_id()". As this is just
something to see if the value is correctly passed in, and the actual CPU
used does not matter, use raw_smp_processor_id(), otherwise with debug
preemption enabled, a warning happens as the smp_processor_id() is called
without preemption enabled.
Thomas Gleixner [Wed, 19 Feb 2020 17:30:26 +0000 (18:30 +0100)]
xen: Enable interrupts when calling _cond_resched()
xen_maybe_preempt_hcall() is called from the exception entry point
xen_do_hypervisor_callback with interrupts disabled.
_cond_resched() evades the might_sleep() check in cond_resched() which
would have caught that and schedule_debug() unfortunately lacks a check
for irqs_disabled().
Enable interrupts around the call and use cond_resched() to catch future
issues.
Fixes: fdfd811ddde3 ("x86/xen: allow privcmd hypercalls to be preempted") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/878skypjrh.fsf@nanos.tec.linutronix.de Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tom Zanussi [Fri, 14 Feb 2020 22:56:41 +0000 (16:56 -0600)]
tracing: Fix number printing bug in print_synth_event()
Fix a varargs-related bug in print_synth_event() which resulted in
strange output and oopses on 32-bit x86 systems. The problem is that
trace_seq_printf() expects the varargs to match the format string, but
print_synth_event() was always passing u64 values regardless. This
results in unspecified behavior when unpacking with va_arg() in
trace_seq_printf().
Add a function that takes the size into account when calling
trace_seq_printf().
Tom Zanussi [Fri, 14 Feb 2020 22:56:40 +0000 (16:56 -0600)]
tracing: Check that number of vals matches number of synth event fields
Commit 7276531d4036('tracing: Consolidate trace() functions')
inadvertently dropped the synth_event_trace() and
synth_event_trace_array() checks that verify the number of values
passed in matches the number of fields in the synthetic event being
traced, so add them back.
Tom Zanussi [Fri, 14 Feb 2020 22:56:39 +0000 (16:56 -0600)]
tracing: Make synth_event trace functions endian-correct
synth_event_trace(), synth_event_trace_array() and
__synth_event_add_val() write directly into the trace buffer and need
to take endianness into account, like trace_event_raw_event_synth()
does.
Tom Zanussi [Fri, 14 Feb 2020 22:56:38 +0000 (16:56 -0600)]
tracing: Make sure synth_event_trace() example always uses u64
synth_event_trace() is the varargs version of synth_event_trace_array(),
which takes an array of u64, as do synth_event_add_val() et al.
To not only be consistent with those, but also to address the fact
that synth_event_trace() expects every arg to be of the same type
since it doesn't also pass in e.g. a format string, the caller needs
to make sure all args are of the same type, u64. u64 is used because
it needs to accomodate the largest type available in synthetic events,
which is u64.
This fixes the bug reported by the kernel test robot/Rong Chen.
David S. Miller [Thu, 20 Feb 2020 18:30:47 +0000 (10:30 -0800)]
Merge branch 's390-fixes'
Julian Wiedmann says:
====================
s390/qeth: fixes 2020-02-20
please apply the following patch series for qeth to netdev's net tree.
This corrects three minor issues:
1) return a more fitting errno when VNICC cmds are not supported,
2) remove a bogus WARN in the NAPI code, and
3) be _very_ pedantic about the RX copybreak.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 20 Feb 2020 14:54:56 +0000 (15:54 +0100)]
s390/qeth: fix off-by-one in RX copybreak check
The RX copybreak is intended as the _max_ value where the frame's data
should be copied. So for frame_len == copybreak, don't build an SG skb.
Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 20 Feb 2020 14:54:55 +0000 (15:54 +0100)]
s390/qeth: don't warn for napi with 0 budget
Calling napi->poll() with 0 budget is a legitimate use by netpoll.
Fixes: a1c3ed4c9ca0 ("qeth: NAPI support for l2 and l3 discipline") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Thu, 20 Feb 2020 14:54:54 +0000 (15:54 +0100)]
s390/qeth: vnicc Fix EOPNOTSUPP precedence
When getting or setting VNICC parameters, the error code EOPNOTSUPP
should have precedence over EBUSY.
EBUSY is used because vnicc feature and bridgeport feature are mutually
exclusive, which is a temporary condition.
Whereas EOPNOTSUPP indicates that the HW does not support all or parts of
the vnicc feature.
This issue causes the vnicc sysfs params to show 'blocked by bridgeport'
for HW that does not support VNICC at all.
Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Thu, 20 Feb 2020 06:23:09 +0000 (22:23 -0800)]
openvswitch: Distribute switch variables for initialization
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
net/openvswitch/flow_netlink.c: In function ‘validate_set’:
net/openvswitch/flow_netlink.c:2711:29: warning: statement will never be executed [-Wswitch-unreachable]
2711 | const struct ovs_key_ipv4 *ipv4_key;
| ^~~~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Thu, 20 Feb 2020 06:23:07 +0000 (22:23 -0800)]
net: ip6_gre: Distribute switch variables for initialization
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
net/ipv6/ip6_gre.c: In function ‘ip6gre_err’:
net/ipv6/ip6_gre.c:440:32: warning: statement will never be executed [-Wswitch-unreachable]
440 | struct ipv6_tlv_tnl_enc_lim *tel;
| ^~~
net/ipv6/ip6_tunnel.c: In function ‘ip6_tnl_err’:
net/ipv6/ip6_tunnel.c:520:32: warning: statement will never be executed [-Wswitch-unreachable]
520 | struct ipv6_tlv_tnl_enc_lim *tel;
| ^~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Thu, 20 Feb 2020 06:23:04 +0000 (22:23 -0800)]
net: core: Distribute switch variables for initialization
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
net/core/skbuff.c: In function ‘skb_checksum_setup_ip’:
net/core/skbuff.c:4809:7: warning: statement will never be executed [-Wswitch-unreachable]
4809 | int err;
| ^~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Qian Cai [Mon, 17 Feb 2020 16:48:26 +0000 (11:48 -0500)]
kvm/emulate: fix a -Werror=cast-function-type
arch/x86/kvm/emulate.c: In function 'x86_emulate_insn':
arch/x86/kvm/emulate.c:5686:22: error: cast between incompatible
function types from 'int (*)(struct x86_emulate_ctxt *)' to 'void
(*)(struct fastop *)' [-Werror=cast-function-type]
rc = fastop(ctxt, (fastop_t)ctxt->execute);
Fix it by using an unnamed union of a (*execute) function pointer and a
(*fastop) function pointer.
Fixes: 3009afc6e39e ("KVM: x86: Use a typedef for fastop functions") Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kees Cook [Thu, 20 Feb 2020 06:23:18 +0000 (22:23 -0800)]
x86/xen: Distribute switch variables for initialization
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
arch/x86/xen/enlighten_pv.c: In function ‘xen_write_msr_safe’:
arch/x86/xen/enlighten_pv.c:904:12: warning: statement will never be executed [-Wswitch-unreachable]
904 | unsigned which;
| ^~~~~
Michael Ellerman [Thu, 20 Feb 2020 04:42:41 +0000 (15:42 +1100)]
selftests: Install settings files to fix TIMEOUT failures
Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit b43e78f65b1d ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Catalin Marinas [Wed, 19 Feb 2020 12:31:56 +0000 (12:31 +0000)]
mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()
Currently the arm64 kernel ignores the top address byte passed to brk(),
mmap() and mremap(). When the user is not aware of the 56-bit address
limit or relies on the kernel to return an error, untagging such
pointers has the potential to create address aliases in user-space.
Passing a tagged address to munmap(), madvise() is permitted since the
tagged pointer is expected to be inside an existing mapping.
The current behaviour breaks the existing glibc malloc() implementation
which relies on brk() with an address beyond 56-bit to be rejected by
the kernel.
Remove untagging in the above functions by partially reverting commit ce18d171cb73 ("mm: untag user pointers in mmap/munmap/mremap/brk"). In
addition, update the arm64 tagged-address-abi.rst document accordingly.
Link: https://bugzilla.redhat.com/1797052 Fixes: ce18d171cb73 ("mm: untag user pointers in mmap/munmap/mremap/brk") Cc: <stable@vger.kernel.org> # 5.4.x- Cc: Florian Weimer <fweimer@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reported-by: Victor Stinner <vstinner@redhat.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
Shijie Luo [Sat, 15 Feb 2020 08:02:06 +0000 (03:02 -0500)]
ext4: add cond_resched() to __ext4_find_entry()
We tested a soft lockup problem in linux 4.19 which could also
be found in linux 5.x.
When dir inode takes up a large number of blocks, and if the
directory is growing when we are searching, it's possible the
restart branch could be called many times, and the do while loop
could hold cpu a long time.
Qian Cai [Fri, 7 Feb 2020 14:29:11 +0000 (09:29 -0500)]
ext4: fix a data race in EXT4_I(inode)->i_disksize
EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by
KCSAN,
BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4]
write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127:
ext4_write_end+0x4e3/0x750 [ext4]
ext4_update_i_disksize at fs/ext4/ext4.h:3032
(inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046
(inlined by) ext4_write_end at fs/ext4/inode.c:1287
generic_perform_write+0x208/0x2a0
ext4_buffered_write_iter+0x11f/0x210 [ext4]
ext4_file_write_iter+0xce/0x9e0 [ext4]
new_sync_write+0x29c/0x3b0
__vfs_write+0x92/0xa0
vfs_write+0x103/0x260
ksys_write+0x9d/0x130
__x64_sys_write+0x4c/0x60
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37:
ext4_writepages+0x10ac/0x1d00 [ext4]
mpage_map_and_submit_extent at fs/ext4/inode.c:2468
(inlined by) ext4_writepages at fs/ext4/inode.c:2772
do_writepages+0x5e/0x130
__writeback_single_inode+0xeb/0xb20
writeback_sb_inodes+0x429/0x900
__writeback_inodes_wb+0xc4/0x150
wb_writeback+0x4bd/0x870
wb_workfn+0x6b4/0x960
process_one_work+0x54c/0xbe0
worker_thread+0x80/0x650
kthread+0x1e0/0x200
ret_from_fork+0x27/0x50
Reported by Kernel Concurrency Sanitizer on:
CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-20200204+ #5
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
Workqueue: writeback wb_workfn (flush-7:0)
Since only the read is operating as lockless (outside of the
"i_data_sem"), load tearing could introduce a logic bug. Fix it by
adding READ_ONCE() for the read and WRITE_ONCE() for the write.
Problem is that reading an attribute takes the kernfs lock in the kernfs
code, then resource->lock in the driver. During an ACPI notification, the
opposite happens: The resource lock is taken first, followed by the kernfs
lock when sysfs attributes are removed and re-created. Presumably this is
now seen due to some locking related changes in kernfs after v5.4, but it
was likely always a problem.
Fix the problem by not blindly acquiring the lock in the notification
function. It is only needed to protect the various update functions.
However, those update functions are called anyway when sysfs attributes
are read. This means that we can just stop calling those functions from
the notifier, and the resource lock in the notifier function is no longer
needed.
That leaves two situations:
First, METER_NOTIFY_CONFIG removes and re-allocates capability strings.
While it did so under the resource lock, _displaying_ those strings was not
protected, creating a race condition. To solve this problem, selectively
protect both removal/creation and reporting of capability attributes with
the resource lock.
Second, removing and re-creating the attribute files is no longer protected
by the resource lock. That doesn't matter since access to each individual
attribute is protected by the kernfs lock. Userspace may get messed up if
attributes disappear and reappear under its nose, but that is not different
than today, and there is nothing we can do about it without major driver
restructuring.
Last but not least, when removing the driver, remove attribute functions
first, then release capability strings. This avoids yet another race
condition.
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: stable@vger.kernel.org # v5.5+ Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Linus Torvalds [Thu, 20 Feb 2020 01:22:10 +0000 (17:22 -0800)]
Merge tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to build failures and other test bugs"
* tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: openat2: fix build error on newer glibc
selftests: use LDLIBS for libraries instead of LDFLAGS
selftests: fix too long argument
selftests: allow detection of build failures
Kernel selftests: tpm2: check for tpm support
selftests/ftrace: Have pid filter test use instance flag
selftests: fix spelling mistaked "chaigned" -> "chained"
Maxime Ripard [Mon, 10 Feb 2020 10:04:17 +0000 (11:04 +0100)]
dt-bindings: media: csi: Fix clocks description
Commit 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible
for CSI1 on A10/A20") introduced support for the CSI1 controller on A10 and
A20 that unlike CSI0 doesn't have an ISP and therefore only have two
clocks, the bus and module clocks.
The clocks and clock-names properties have thus been modified to allow
either two or tree clocks. However, the current list has the ISP clock at
the second position, which means the bindings expects a list of either
bus and isp, or bus, isp and mod. The initial intent of the patch was
obviously to have bus and mod in the former case.
Let's fix the binding so that it validates properly.
Fixes: 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org>
The Allwinner CSI controller is sitting beside the MBUS that is represented
as an interconnect.
Make sure that the interconnect properties are valid in the binding.
Fixes: 7866d6903ce8 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org>
dt-bindings: net: mdio: remove compatible string from example
Remove vendor specific compatible string from example, otherwise DT YAML
schemas validation may trigger warnings specific to TI ti,davinci_mdio
and not to the generic MDIO example.
For example, the "bus_freq" is required for davinci_mdio, but not required for
generic mdio example. As result following warning will be produced:
mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Rob Herring <robh@kernel.org>
Thierry Reding [Tue, 14 Jan 2020 12:38:21 +0000 (13:38 +0100)]
dt-bindings: memory-controller: Update example for Tegra124 EMC
The example in the Tegra124 EMC device tree binding looks like an old
version that doesn't contain all the required fields. Update it with a
version from the current DTS files to fix the make dt_binding_check
target.
Reported-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
[robh: also fix missing '#reset-cells'] Signed-off-by: Rob Herring <robh@kernel.org>
Dave Airlie [Thu, 20 Feb 2020 01:01:28 +0000 (11:01 +1000)]
Merge tag 'drm-msm-fixes-2020-02-16' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
+ fix UBWC on GPU and display side for sc7180
+ fix DSI suspend/resume issue encountered on sc7180
+ fix some breakage on so called "linux-android" devices
(fallout from sc7180/a618 support, not seen earlier
due to bootloader/firmware differences)
+ couple other misc fixes
David S. Miller [Thu, 20 Feb 2020 00:38:16 +0000 (16:38 -0800)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-02-19
This series contains fixes to the ice driver.
Brett fixes an issue where if a user sets an odd [tx|rx]-usecs value
through ethtool, the request is denied because the hardware is set to
have an ITR with 2us granularity. Also fix an issue where the VF has
not been completely removed/reset after being unbound from the host
driver, so resolve this by waiting for the VF remove/reset process to
happen before checking if the VF is disabled.
Michal fixes an issue, where when the user changes flow control via
ethtool, the OS is told the link is going down when that may not be the
case. Before the fix, the only way to get out of this state was to take
the interface down and up again.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Wed, 19 Feb 2020 19:16:32 +0000 (14:16 -0500)]
udp: rehash on disconnect
As of the below commit, udp sockets bound to a specific address can
coexist with one bound to the any addr for the same port.
The commit also phased out the use of socket hashing based only on
port (hslot), in favor of always hashing on {addr, port} (hslot2).
The change broke the following behavior with disconnect (AF_UNSPEC):
server binds to 0.0.0.0:1337
server connects to 127.0.0.1:80
server disconnects
client connects to 127.0.0.1:1337
client sends "hello"
server reads "hello" // times out, packet did not find sk
On connect the server acquires a specific source addr suitable for
routing to its destination. On disconnect it reverts to the any addr.
The connect call triggers a rehash to a different hslot2. On
disconnect, add the same to return to the original hslot2.
Skip this step if the socket is going to be unhashed completely.
Fixes: 4cdeeee9252a ("net: udp: prefer listeners bound to an address") Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rohit Maheshwari [Wed, 19 Feb 2020 04:10:22 +0000 (09:40 +0530)]
net/tls: Fix to avoid gettig invalid tls record
Current code doesn't check if tcp sequence number is starting from (/after)
1st record's start sequnce number. It only checks if seq number is before
1st record's end sequnce number. This problem will always be a possibility
in re-transmit case. If a record which belongs to a requested seq number is
already deleted, tls_get_record will start looking into list and as per the
check it will look if seq number is before the end seq of 1st record, which
will always be true and will return 1st record always, it should in fact
return NULL.
As part of the fix, start looking each record only if the sequence number
lies in the list else return NULL.
There is one more check added, driver look for the start marker record to
handle tcp packets which are before the tls offload start sequence number,
hence return 1st record if the record is tls start marker and seq number is
before the 1st record's starting sequence number.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Wed, 19 Feb 2020 23:47:57 +0000 (15:47 -0800)]
bpf: Fix a potential deadlock with bpf_map_do_batch
Commit 057996380a42 ("bpf: Add batch ops to all htab bpf map")
added lookup_and_delete batch operation for hash table.
The current implementation has bpf_lru_push_free() inside
the bucket lock, which may cause a deadlock.
To fix the issue, for htab_lru_map_lookup_and_delete_batch() in CPU0,
let us do bpf_lru_push_free() out of the htab bucket lock. This can
avoid the above deadlock scenario.
Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map") Reported-by: syzbot+a38ff3d9356388f2fb83@syzkaller.appspotmail.com Reported-by: syzbot+122b5421d14e68f29cd1@syzkaller.appspotmail.com Suggested-by: Hillf Danton <hdanton@sina.com> Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Brian Vazquez <brianvv@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200219234757.3544014-1-yhs@fb.com
Brian Vazquez [Tue, 18 Feb 2020 17:25:52 +0000 (09:25 -0800)]
bpf: Do not grab the bucket spinlock by default on htab batch ops
Grabbing the spinlock for every bucket even if it's empty, was causing
significant perfomance cost when traversing htab maps that have only a
few entries. This patch addresses the issue by checking first the
bucket_cnt, if the bucket has some entries then we go and grab the
spinlock and proceed with the batching.
Tested with a htab of size 50K and different value of populated entries.
Heidi Fahim [Tue, 18 Feb 2020 22:19:16 +0000 (14:19 -0800)]
kunit: run kunit_tool from any directory
Implemented small fix so that the script changes work directories to the
root of the linux kernel source tree from which kunit.py is run. This
enables the user to run kunit from any working directory. Originally
considered using os.path.join but this is more error prone as we would
have to find all file path usages and modify them accordingly. Using
os.chdir ensures that the entire script is run within /linux.
Heidi Fahim [Tue, 26 Nov 2019 22:36:16 +0000 (14:36 -0800)]
kunit: test: Improve error messages for kunit_tool when kunitconfig is invalid
Previous error message for invalid kunitconfig was vague. Added to it so
that it lists invalid fields and prompts for them to be removed. Added
validate_config function returning whether or not this kconfig is valid.
> virsh attach-device domain_name pci_0000_af_0_0.xml
error: Failed to attach device from pci_0000_af_0_0.xml
error: Cannot set interface MAC/vlanid to 00:de:ad:00:11:01/0 for
ifname ens1f1 vf 0: Device or resource busy
This is failing because the VF has not been completely removed/reset
after being unbound (via the virsh command above) from the host iavf
driver and ice_set_vf_mac() checks if the VF is disabled before waiting
for the reset to finish.
Fix this by waiting for the VF remove/reset process to happen before
checking if the VF is disabled. Also, since many functions for VF
administration on the PF were more or less calling the same 3 functions
(ice_wait_on_vf_reset(), ice_is_vf_disabled(), and ice_check_vf_init())
move these into the helper function ice_check_vf_ready_for_cfg(). Then
call this function in any flow that attempts to configure/query a VF
from the PF.
Lastly, increase the maximum wait time in ice_wait_on_vf_reset() to
800ms, and modify/add the #define(s) that determine the wait time.
This was done for robustness because in rare/stress cases VF removal can
take a max of ~800ms and previously the wait was a max of ~300ms.
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Remove code that tell the OS that link is going down when user
change flow control via ethtool. When link is up it isn't certain
that link goes down after 0x0605 aq command. If link doesn't go
down, OS thinks that link is down, but physical link is up. To
reset this state user have to take interface down and up.
If link goes down after 0x0605 command, FW send information
about that and after that driver tells the OS that the link goes
down. So this code in ethtool is unnecessary.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Thu, 13 Feb 2020 21:31:23 +0000 (13:31 -0800)]
ice: Don't reject odd values of usecs set by user
Currently if a user sets an odd [tx|rx]-usecs value through ethtool,
the request is denied because the hardware is set to have an ITR
granularity of 2us. This caused poor customer experience. Fix this by
aligning to a register allowed value, which results in rounding down.
Also, print a once per ring container type message to be clear about
our intentions.
Also, change the ITR_TO_REG define to be the bitwise and of the ITR
setting and the ICE_ITR_MASK. This makes the purpose of ITR_TO_REG more
obvious.
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The PN544 driver checks the "enable" polarity during of driver's probe and
it's doing that by turning ON and OFF NFC with different polarities until
enabling succeeds. It takes some time for the hardware to power-down, and
thus, to deassert the IRQ that is raised by turning ON the hardware.
Since the delay after last power-down of the polarity-checking process is
missed in the code, the interrupt may trigger immediately after installing
the IRQ handler (right after the checking is done), which results in IRQ
handler trying to touch the disabled HW and ends with marking NFC as
'DEAD' during of the driver's probe:
pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high
pn544_hci_i2c 1-002a: NFC: invalid len byte
shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead
This patch fixes the occasional NFC initialization failure on Nexus 7
device.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
added support for access to the free-running counter via 'perf -e
msr/irperf/', but when exercised, it always returns a 0 count:
BEFORE:
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
624,833 instructions
0 msr/irperf/
Simply set its enable bit - HWCR bit 30 - to make it start counting.
Enablement is restricted to all machines advertising IRPERF capability,
except those susceptible to an erratum that makes the IRPERF return
bad values.
That erratum occurs in Family 17h models 00-1fh [1], but not in F17h
models 20h and above [2].
AFTER (on a family 17h model 31h machine):
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
621,690 instructions
622,490 msr/irperf/
[1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors
[2] Revision Guide for AMD Family 17h Models 30h-3Fh Processors
The revision guides are available from the bugzilla Link below.
Paul Cercueil [Tue, 11 Feb 2020 14:53:37 +0000 (11:53 -0300)]
MIPS: ingenic: DTS: Fix watchdog nodes
The devicetree ABI was broken on purpose by commit 6d532143c915
("watchdog: jz4740: Use regmap provided by TCU driver"), and
commit 1d9c30745455 ("watchdog: jz4740: Use WDT clock provided
by TCU driver"). The commit message of the latter explains why the ABI
was broken.
However, the current devicetree files were not updated to the new ABI
described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt,
so the watchdog driver would not probe.
Fix this problem by updating the watchdog nodes to comply with the new
ABI.
Fixes: 6d532143c915 ("watchdog: jz4740: Use regmap provided by TCU driver") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com> Cc: od@zcrc.me Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v5.5+
The devicetree ABI was broken on purpose by commit 6d532143c915
("watchdog: jz4740: Use regmap provided by TCU driver"), and
commit 1d9c30745455 ("watchdog: jz4740: Use WDT clock provided
by TCU driver"). The commit message of the latter explains why the ABI
was broken.
However, the current devicetree files were not updated to the new ABI
described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt,
so the watchdog driver would not probe.
Fix this problem by updating the clock of watchdog node from
"&cgu X1000_CLK_RTCLK" to "&tcu TCU_CLK_WDT" to comply with the new
ABI.
Please pull and let me know if there is any problem.
For -stable v5.3
('net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa')
For -stable v5.4
('net/mlx5: DR, Fix matching on vport gvmi')
('net/mlx5e: Fix crash in recovery flow without devlink reporter')
For -stable v5.5
('net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY')
('net/mlx5e: Don't clear the whole vf config when switching modes')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang does not appear to need this flag like GCC does because the jalr
check that was added in commit 976c23af3ee5 ("mips: vdso: add build
time check that no 'jalr t9' calls left") passes just fine with
$ make ARCH=mips CC=clang CROSS_COMPILE=mipsel-linux-gnu- malta_defconfig arch/mips/vdso/
even before commit d3f703c4359f ("mips: vdso: fix 'jalr t9' crash in
vdso code").
-mrelax-pic-calls has been supported since clang 9, which is the
earliest version that could build a working MIPS kernel, and it is the
default for clang so just leave it be.
Fixes: d3f703c4359f ("mips: vdso: fix 'jalr t9' crash in vdso code") Link: https://github.com/ClangBuiltLinux/linux/issues/890 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: clang-built-linux@googlegroups.com
Linus Torvalds [Wed, 19 Feb 2020 17:26:59 +0000 (09:26 -0800)]
Merge tag 'sound-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only largish change in this pull request is about the revert of
the recent max98090 and its relevant patches due to regressions.
Other than that, all small fixes for ALSA core (covering KCSAN fuzzer
warnings in ALSA sequencer and rawmidi), Intel SOF HD-audio fixes, AMD
ACP fixes, usual HD-audio quirks, and various ASoC fixes"
* tag 'sound-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Use scnprintf() for printing texts for sysfs/procfs
ALSA: hda/realtek - Apply quirk for yet another MSI laptop
ASoC: sun8i-codec: Fix setting DAI data format
ALSA: hda/realtek - Apply quirk for MSI GP63, too
ASoC: amd: ACP needs to be powered off in BIOS.
ASoC: hdmi-codec: set plugged_cb to NULL when component removing
ASoC: dapm: remove snd_soc_dapm_put_enum_double_locked
ASoC: max98090: revert invalid fix for handling SHDN
ALSA: rawmidi: Avoid bit fields for state flags
ALSA: seq: Fix concurrent access to queue current tick/time
ALSA: seq: Avoid concurrent access to queue flags
ASoC: codec2codec: avoid invalid/double-free of pcm runtime
ASoC: amd: Buffer Size instead of MAX Buffer
ASoC: SOF: Intel: hda: move i915 init earlier
ASoC: SOF: Intel: hda: fix ordering bug in resume flow
ALSA: hda: do not override bus codec_mask in link_get()
ASoC: atmel: fix atmel_ssc_set_audio link failure
ASoC: fsl_sai: Fix exiting path on probing failure
Keith Busch [Wed, 19 Feb 2020 15:59:36 +0000 (00:59 +0900)]
nvme: Fix uninitialized-variable warning
gcc may detect a false positive on nvme using an unintialized variable
if setting features fails. Since this is not a fast path, explicitly
initialize this variable to suppress the warning.
Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
H.J. Lu [Thu, 16 Jan 2020 20:46:51 +0000 (12:46 -0800)]
x86/boot/compressed: Don't declare __force_order in kaslr_64.c
GCC 10 changed the default to -fno-common, which leads to
LD arch/x86/boot/compressed/vmlinux
ld: arch/x86/boot/compressed/pgtable_64.o:(.bss+0x0): multiple definition of `__force_order'; \
arch/x86/boot/compressed/kaslr_64.o:(.bss+0x0): first defined here
make[2]: *** [arch/x86/boot/compressed/Makefile:119: arch/x86/boot/compressed/vmlinux] Error 1
Since __force_order is already provided in pgtable_64.c, there is no
need to declare __force_order in kaslr_64.c.
Alex Deucher [Tue, 18 Feb 2020 18:20:30 +0000 (13:20 -0500)]
drm/amdgpu/display: clean up hdcp workqueue handling
Use the existence of the workqueue itself to determine when to
enable HDCP features rather than sprinkling asic checks all over
the code. Also add a check for the existence of the hdcp
workqueue in the irq handling on the off chance we get and HPD
RX interrupt with the CP bit set. This avoids a crash if
the driver doesn't support HDCP for a particular asic.
Fixes: 96a3b32e67236f ("drm/amd/display: only enable HDCP for DCN+")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206519 Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
changzhu [Fri, 14 Feb 2020 02:57:17 +0000 (10:57 +0800)]
drm/amdgpu: add is_raven_kicker judgement for raven1
The rlc version of raven_kicer_rlc is different from the legacy rlc
version of raven_rlc. So it needs to add a judgement function for
raven_kicer_rlc and avoid disable GFXOFF when loading raven_kicer_rlc.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shyjumon N [Thu, 6 Feb 2020 20:17:25 +0000 (13:17 -0700)]
nvme/pci: Add sleep quirk for Samsung and Toshiba drives
The Samsung SSD SM981/PM981 and Toshiba SSD KBG40ZNT256G on the Lenovo
C640 platform experience runtime resume issues when the SSDs are kept in
sleep/suspend mode for long time.
This patch applies the 'Simple Suspend' quirk to these configurations.
With this patch, the issue had not been observed in a 1+ day test.
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Shyjumon N <shyjumon.n@intel.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
Will Deacon [Wed, 19 Feb 2020 10:19:13 +0000 (10:19 +0000)]
arm64: memory: Add missing brackets to untagged_addr() macro
Add brackets around the evaluation of the 'addr' parameter to the
untagged_addr() macro so that the cast to 'u64' applies to the result
of the expression.
Cc: <stable@vger.kernel.org> Fixes: 597399d0cb91 ("arm64: tags: Preserve tags for addresses translated via TTBR1") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will@kernel.org>
Stephen Kitt [Fri, 14 Feb 2020 17:26:28 +0000 (18:26 +0100)]
s390: remove obsolete ieee_emulation_warnings
s390 math emulation was removed with commit 5a79859ae0f3 ("s390:
remove 31 bit support"), rendering ieee_emulation_warnings useless.
The code still built because it was protected by CONFIG_MATHEMU, which
was no longer selectable.
This patch removes the sysctl_ieee_emulation_warnings declaration and
the sysctl entry declaration.
Will Deacon [Tue, 18 Feb 2020 17:27:56 +0000 (17:27 +0000)]
iommu/arm-smmu: Restore naming of driver parameter prefix
Extending the Arm SMMU driver to allow for modular builds changed
KBUILD_MODNAME to be "arm_smmu_mod" so that a single module could be
built from the multiple existing object files without the need to rename
any source files.
This inadvertently changed the name of the driver parameters, which may
lead to runtime issues if bootloaders are relying on the old names for
correctness (e.g. "arm-smmu.disable_bypass=0").
Although MODULE_PARAM_PREFIX can be overridden to restore the old naming
for builtin parameters, only the new name is matched by modprobe and so
loading the driver as a module would cause parameters specified on the
kernel command line to be ignored. Instead, rename "arm_smmu_mod" to
"arm_smmu". Whilst it's a bit of a bodge, this allows us to create a
single module without renaming any files and makes use of the fact that
underscores and hyphens can be used interchangeably in parameter names.
Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@armlinux.org.uk> Reported-by: Li Yang <leoyang.li@nxp.com> Fixes: cd221bd24ff5 ("iommu/arm-smmu: Allow building as a module") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
Robin Murphy [Tue, 18 Feb 2020 18:12:41 +0000 (18:12 +0000)]
iommu/qcom: Fix bogus detach logic
Currently, the implementation of qcom_iommu_domain_free() is guaranteed
to do one of two things: WARN() and leak everything, or dereference NULL
and crash. That alone is terrible, but in fact the whole idea of trying
to track the liveness of a domain via the qcom_domain->iommu pointer as
a sanity check is full of fundamentally flawed assumptions. Make things
robust and actually functional by not trying to be quite so clever.
Reported-by: Brian Masney <masneyb@onstation.org> Tested-by: Brian Masney <masneyb@onstation.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Joerg Roedel <jroedel@suse.de>