Nicolas Pitre [Wed, 4 Nov 2009 21:32:46 +0000 (16:32 -0500)]
pack-objects: move thread autodetection closer to relevant code
Let's keep thread stuff close together if possible. And in this case,
this even reduces the #ifdef noise, and allows for skipping the
autodetection altogether if delta search is not needed (like with a pure
clone).
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Daniel Barkalow [Wed, 4 Nov 2009 02:52:35 +0000 (21:52 -0500)]
Allow curl helper to work without a local repository
It's okay to use the curl helper without a local repository, so long
as you don't use "fetch". There aren't any git programs that would try
to use it, and it doesn't make sense to try it (since there's nowhere
to write the results), but we may as well be clear.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Daniel Barkalow [Wed, 4 Nov 2009 02:38:51 +0000 (21:38 -0500)]
Require a struct remote in transport_get()
cmd_ls_remote() was calling transport_get() with a NULL remote and a
non-NULL url in the case where it was run outside a git
repository. This involved a bunch of ill-tested special
cases. Instead, simply get the struct remote for the URL with
remote_get(), which works fine outside a git repository, and can also
take global options into account.
This fixes a tiny and obscure bug where "git ls-remote" without a repo
didn't support global url.*.insteadOf, even though "git clone" and
"git ls-remote" in any repo did.
Also, enforce that all callers provide a struct remote to transport_get().
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is not enough justification for doing this. We do not update
things in .git/branches and .git/remotes anymore, but still do read
information from there and will keep doing so.
Besides, this breaks quite a lot of tests in t55?? series.
Junio C Hamano [Sat, 31 Oct 2009 03:05:47 +0000 (20:05 -0700)]
Merge branch 'ja/fetch-doc'
* ja/fetch-doc:
Documentation/merge-options.txt: order options in alphabetical groups
Documentation/git-pull.txt: Add subtitles above included option files
Documentation/fetch-options.txt: order options alphabetically
Make the MSVC projects use PDB/IDB files named after the project
Instead of having all PDB files for all projects named "vc90.pdb", name them
after the respective project to make the relation more clear (and to avoid name
clashes when copying files around).
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: Marius Storm-Olsen <mstormo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with MSVC on x86-compatible, use an intrinsic for byte swapping.
In contrast to the GCC path, we do not prefer inline assembly here as it is not
supported for the x64 platform.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 28 Oct 2009 18:21:46 +0000 (11:21 -0700)]
Merge branch 'maint'
* maint:
help -a: do not unnecessarily look for a repository
Do not try to remove directories when removing old links
rebase -i: more graceful handling of invalid commands
help -i: properly error out if no info viewer can be found
David Brown [Wed, 28 Oct 2009 17:13:44 +0000 (10:13 -0700)]
commit: More generous accepting of RFC-2822 footer lines.
'git commit -s' will insert a blank line before the Signed-off-by
line at the end of the message, unless this last line is a
Signed-off-by line itself. Common use has other trailing lines
at the ends of commit text, in the style of RFC2822 headers.
Be more generous in considering lines to be part of this footer.
If the last paragraph of the commit message reasonably resembles
RFC-2822 formatted lines, don't insert that blank line.
The new Signed-off-by line is still only suppressed when the
author's existing Signed-off-by is the last line of the message.
Signed-off-by: David Brown <davidb@quicinc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash completion: difftool accepts the same options as diff
So complete refs, files after the double-dash and some diff options that
make sense for difftool.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help -a: do not unnecessarily look for a repository
Although 'git help -a' actually doesn't need to be run inside a git
repository and uses no repository-specific information, it looks for a git
directory. On 'git <TAB><TAB>' the bash completion runs 'git help -a' and
unnecessary searching for a git directory can be annoying in auto-mount
environments. With this commit, 'git help' no longer searches for a
repository when run with the -a option.
Reported by Vincent Danjean through http://bugs.debian.org/539273
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Björn Gustavsson [Sat, 17 Oct 2009 09:33:38 +0000 (11:33 +0200)]
bash: complete more options for 'git rebase'
Complete all long options for 'git rebase' except --no-verify
(probably used very seldom) and the long options corresponding
to -v, -q, and -f.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not try to remove directories when removing old links
When building Git with MSVC on Windows, directories named after the Git alias
are created for the output files, e.g. there is a "git-merge-index" directory
next to the "git-merge-index.exe" executable in the build root. Previously,
"make all" just checked if "git-merge-index" and "git-merge-index.exe" are the
same file, and if not, tried to remove "git-merge-index". This fails in the
case of "git-merge-index" being a directory, which is why this is checked now.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jan Krüger [Tue, 27 Oct 2009 14:58:14 +0000 (15:58 +0100)]
rebase -i: more graceful handling of invalid commands
Currently, when there is an invalid command, the rest of the line is
still treated as if the command had been valid, i.e. rebase -i attempts
to produce a patch, using the next argument as a SHA1 name. If there is
no next argument or an invalid one, very confusing error messages
appear (the line was '.'; path to git-rebase-todo substituted):
Unknown command: .
fatal: ambiguous argument 'Please fix this in the file $somefile.':
unknown revision or path not in the working tree.
Use '--' to separate paths from revisions
fatal: Not a valid object name Please fix this in the file $somefile.
fatal: bad revision 'Please fix this in the file $somefile.'
Instead, verify the validity of the remaining line and error out earlier
if necessary.
Signed-off-by: Jan Krüger <jk@jk.gs> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 27 Oct 2009 23:07:41 +0000 (16:07 -0700)]
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
git-svn: convert SVN 1.5+ / svnmerge.py svn:mergeinfo props to parents
git-svn: add test data for SVN 1.5+ merge, with script.
git-svn: convert SVK merge tickets to extra parents
git-svn: allow test setup script to support PERL env. var
git-svn: add test data for SVK merge, with script.
git svn: fix fetch where glob is on the top-level URL
Junio C Hamano [Tue, 27 Oct 2009 21:55:37 +0000 (14:55 -0700)]
Merge git://repo.or.cz/git-gui
* git://repo.or.cz/git-gui:
git-gui: adjust the minimum height of diff pane for shorter screen height
git-gui: fix use of uninitialized variable
git-gui: store wm state and fix wm geometry
git-gui: Ensure submodule path is quoted properly
git-gui: fix diff for partially staged submodule changes
git-gui: Update russian translation
git-gui: Limit display to a maximum number of files
git-gui: remove warning when deleting correctly merged remote branch
git-gui: Added Greek translation & glossary
git-gui: display summary when showing diff of a submodule
Vietor Liu [Fri, 16 Oct 2009 09:41:26 +0000 (17:41 +0800)]
git-gui: adjust the minimum height of diff pane for shorter screen height
When the main window is maximized, if the screen height is shorter (e.g.
Netbook screen 1024x600), both the partial commit pane and the status bar
are hidden. The diff pane is resizable, so that it can use less vertical
height, allowing the overall window to be shorter and still display both
the entire commit pane and status bar.
Signed-off-by: Vietor Liu <vietor@vxwo.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sam Vilain [Tue, 20 Oct 2009 02:42:03 +0000 (15:42 +1300)]
git-svn: convert SVN 1.5+ / svnmerge.py svn:mergeinfo props to parents
This feature is long overdue; convert SVN's merge representation to git's
as revisions are imported. This works by converting the list of revisions
in each line of the svn:mergeinfo into git revision ranges, and then
checking the latest of each of these revision ranges for A) being new and
B) now being completely merged.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Acked-by: Eric Wong <normalperson@yhbt.net>
Sam Vilain [Tue, 20 Oct 2009 02:42:01 +0000 (15:42 +1300)]
git-svn: convert SVK merge tickets to extra parents
SVK is a simple case to start with, as its idea of merge parents
matches git's one. When a svk:merge ticket is encountered, check each
of the listed merged revisions to see if they are in the history of
this commit; if not, then we have encountered a merge - record it.
[ew: minor formatting cleanups]
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Acked-by: Eric Wong <normalperson@yhbt.net>
Eric Wong [Fri, 23 Oct 2009 06:39:04 +0000 (23:39 -0700)]
git svn: fix fetch where glob is on the top-level URL
In cases where the top-level URL we're tracking is the path we
glob against, we can once again track odd repositories that keep
branches/tags at the top level. This regression was introduced
in commit 6f5748e14cc5bb0a836b649fb8e2d6a5eb166f1d.
Thanks to Daniel Cordero for the original bug report and
bisection.
Junio C Hamano [Mon, 26 Oct 2009 01:40:20 +0000 (18:40 -0700)]
Merge branch 'jc/receive-pack-auto'
* jc/receive-pack-auto:
receive-pack: run "gc --auto --quiet" and optionally "update-server-info"
gc --auto --quiet: make the notice a bit less verboase
Andreas Schwab [Sat, 24 Oct 2009 13:06:57 +0000 (15:06 +0200)]
Work around option parsing bug in the busybox tar implementation
The first argument of the tar command is interpreted as a bundle of
letters specifying the mode of operation and additional options, with
any option arguments taken from subsequent words on the command line
as needed. The implementation of tar in busybox treats this bundle
as if preceded by a dash and then parses it by getopt rules, which
mishandles 'tar xfo -'. Use 'tar xof -' instead to work this around.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Thu, 22 Oct 2009 08:19:06 +0000 (10:19 +0200)]
Quote ' as \(aq in manpages
The docbook/xmlto toolchain insists on quoting ' as \'. This does
achieve the quoting goal, but modern 'man' implementations turn the
apostrophe into a unicode "proper" apostrophe (given the right
circumstances), breaking code examples in many of our manpages.
Quote them as \(aq instead, which is an "apostrophe quote" as per the
groff_char manpage.
Unfortunately, as Anders Kaseorg kindly pointed out, this is not
portable beyond groff, so we add an extra Makefile variable GNU_ROFF
which you need to enable to get the new quoting.
Thanks also to Miklos Vajna for documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 22 Oct 2009 06:06:14 +0000 (23:06 -0700)]
Fix incorrect error check while reading deflated pack data
The loop in get_size_from_delta() feeds a deflated delta data from the
pack stream _until_ we get inflated result of 20 bytes[*] or we reach the
end of stream.
Side note. This magic number 20 does not have anything to do with the
size of the hash we use, but comes from 1a3b55c (reduce delta head
inflated size, 2006-10-18).
The loop reads like this:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
stream.total_out < sizeof(delta_head));
This git_inflate() can return:
- Z_STREAM_END, if use_pack() fed it enough input and the delta itself
was smaller than 20 bytes;
- Z_OK, when some progress has been made;
- Z_BUF_ERROR, if no progress is possible, because we either ran out of
input (due to corrupt pack), or we ran out of output before we saw the
end of the stream.
The fix b3118bd (sha1_file: Fix infinite loop when pack is corrupted,
2009-10-14) attempted was against a corruption that appears to be a valid
stream that produces a result larger than the output buffer, but we are
not even trying to read the stream to the end in this loop. If avail_out
becomes zero, total_out will be the same as sizeof(delta_head) so the loop
will terminate without the "fix". There is no fix from b3118bd needed for
this loop, in other words.
The loop in unpack_compressed_entry() is quite a different story. It
feeds a deflated stream (either delta or base) and allows the stream to
produce output up to what we expect but no more.
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
This _does_ risk falling into an endless interation, as we can exhaust
avail_out if the length we expect is smaller than what the stream wants to
produce (due to pack corruption). In such a case, avail_out will become
zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may
not) be zero.
But this is not a right fix:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
+ if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out)
+ break; /* wants more input??? */
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run
out before reading the end of stream marker. In such a case, both avail_in
and avail_out would be zero, and the loop should iterate to allow the end
of stream marker to be seen by inflate from the input stream.
The right fix for this loop is likely to be to increment the initial
avail_out by one (we allocate one extra byte to terminate it with NUL
anyway, so there is no risk to overrun the buffer), and break out if we
see that avail_out has become zero, in order to detect that the stream
wants to produce more than what we expect. After the loop, we have a
check that exactly tests this condition:
So here is a patch (without my previous botched attempts) to fix this
issue. The first hunk reverts the corresponding hunk from b3118bd, and
the second hunk is the same fix proposed earlier.
Ingmar Vanhassel [Tue, 20 Oct 2009 10:29:32 +0000 (12:29 +0200)]
import-tars: Add support for tarballs compressed with lzma, xz
Also handle the extensions .tlz and .txz, aliases for .tar.lzma and
.tar.xz respectively.
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org> Liked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 20 Oct 2009 21:56:40 +0000 (14:56 -0700)]
receive-pack: run "gc --auto --quiet" and optionally "update-server-info"
Introduce two new configuration variables, receive.autogc (defaults to
true) and receive.updateserverinfo (defaults to false). When these are
set, receive-pack runs "gc --auto --quiet" and "update-server-info"
respectively after it finishes receiving data from "git push" and updating
refs.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Nicolas Pitre <nico@fluxnic.net>
Junio C Hamano [Sun, 18 Oct 2009 07:49:23 +0000 (00:49 -0700)]
git checkout --no-guess
Porcelains may want to make sure their calls to "git checkout" will
reliably fail regardless of the presense of random remote tracking
branches by the new DWIMmery introduced.
Luckily all existing in-tree callers have extra checks to make sure they
feed local branch name when they want to switch, or they explicitly ask to
detach HEAD at the given commit, so there is no need to add this option
for them.
As this is strictly script-only option, do not even bother to document it,
and do bother to hide it from "git checkout -h".
The "git pull" documentation has examples which follow an outdated
style. Update the examples to use "git merge" where appropriate and
move the examples to the corresponding manpages.
Furthermore,
- show that pull is equivalent to fetch and merge, which is still a
frequently asked question,
- explain the default fetch refspec.
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 20 Oct 2009 18:46:55 +0000 (11:46 -0700)]
fsck: default to "git fsck --full"
Linus and other git developers from the early days trained their fingers
to type the command, every once in a while even without thinking, to check
the consistency of the repository back when the lower core part of the git
was still being developed. Developers who wanted to make sure that git
correctly dealt with packfiles could deliberately trigger their creation
and checked them after they were created carefully, but loose objects are
the ones that are written by various commands from random codepaths. It
made some technical sense to have a mode that checked only loose objects
from the debugging point of view for that reason.
Even for git developers, there no longer is any reason to type "git fsck"
every five minutes these days, worried that some newly created objects
might be corrupt due to recent change to git.
The reason we did not make "--full" the default is probably we trust our
filesystems a bit too much. At least, we trusted filesystems more than we
trusted the lower core part of git that was under development.
Once a packfile is created and we always use it read-only, there didn't
seem to be much point in suspecting that the underlying filesystems or
disks may corrupt them in such a way that is not caught by the SHA-1
checksum over the entire packfile and per object checksum. That trust in
the filesystems might have been a good tradeoff between fsck performance
and reliability on platforms git was initially developed on and for, but
it may not be true anymore as we run on many more platforms these days.
Stephen Boyd [Fri, 16 Oct 2009 04:14:59 +0000 (21:14 -0700)]
gitweb: linkify author/committer names with search
It's nice to search for an author by merely clicking on their name in
gitweb. This is usually faster than selecting the name, copying the
selection, pasting it into the search box, selecting between
author/committer and then hitting enter.
Linkify the avatar icon in log/shortlog view because the icon is directly
adjacent to the name and thus more related. The same is not true
when in commit/tag view where the icon is farther away.
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --submodule option to the diff option family
When you use the option --submodule=log you can see the submodule
summaries inlined in the diff, instead of not-quite-helpful SHA-1 pairs.
The format imitates what "git submodule summary" shows.
To do that, <path>/.git/objects/ is added to the alternate object
databases (if that directory exists).
This option was requested by Jens Lehmann at the GitTogether in Berlin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 19 Oct 2009 15:48:12 +0000 (17:48 +0200)]
stash list: drop the default limit of 10 stashes
'git stash list' had an undocumented limit of 10 stashes, unless other
git-log arguments were specified. This surprised at least one user,
but possibly served to cut the output below a screenful without using
a pager.
Since the last commit, 'git stash list' will fire up a pager according
to the same rules as the 'git log' it calls, so we can drop the limit.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 19 Oct 2009 15:48:11 +0000 (17:48 +0200)]
stash list: use new %g formats instead of sed
With the new formats, we can rewrite 'git stash list' in terms of an
appropriate pretty format, instead of hand-editing with sed. This has
the advantage that it obeys the normal settings for git-log, notably
the pager.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 19 Oct 2009 15:48:10 +0000 (17:48 +0200)]
Introduce new pretty formats %g[sdD] for reflog information
Add three new --pretty=format escapes:
%gD long reflog descriptor (e.g. refs/stash@{0})
%gd short reflog descriptor (e.g. stash@{0})
%gs reflog message
This is achieved by passing down the reflog info, if any, inside the
pretty_print_context struct.
We use the newly refactored get_reflog_selector(), and give it some
extra functionality to extract a shortened ref. The shortening is
cached inside the commit_reflogs struct; the only allocation of it
happens in read_complete_reflog(), where it is initialised to 0. Also
add another helper get_reflog_message() for the message extraction.
Note that the --format="%h %gD: %gs" tests may not work in real
repositories, as the --pretty formatter doesn't know to leave away the
": " on the last commit in an incomplete (because git-gc removed the
old part) reflog. This equivalence is nevertheless the main goal of
this patch.
Thanks to Jeff King for reviews, the %gd testcase and documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 19 Oct 2009 15:48:08 +0000 (17:48 +0200)]
Refactor pretty_print_commit arguments into a struct
pretty_print_commit() has a bunch of rarely-used arguments, and
introducing more of them requires yet another update of all the call
sites. Refactor most of them into a struct to make future extensions
easier.
The ones that stay "plain" arguments were chosen on the grounds that
all callers put real arguments there, whereas some callers have 0/NULL
for all arguments that were factored into the struct.
We declare the struct 'const' to ensure none of the callers are bitten
by the changed (no longer call-by-value) semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Boyd [Fri, 16 Oct 2009 06:32:33 +0000 (23:32 -0700)]
rebase -i: fix reword when using a terminal editor
We don't want to use output() on git-commit --amend when rewording the
commit message. This leads to confusion as the editor is run in a
subshell with it's output saved away, leaving the user with a seemingly
frozen terminal.
Fix by removing the output part.
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 16 Oct 2009 05:59:41 +0000 (22:59 -0700)]
format_commit_message(): fix function signature
The format template string was declared as "const void *" for some unknown
reason, even though it obviously is meant to be passed a string. Make it
"const char *".