git_connect() can return 0 if we use git protocol for example.
Users of this function don't know and don't care if a process
had been created or not, and to avoid them to check it before
calling finish_connect() this patch allows finish_connect() to
take a null pid. And in that case return 0.
[jc: updated function signature of git_connect() with a comment on
its return value. ]
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Christian Couder [Mon, 11 Sep 2006 05:04:50 +0000 (07:04 +0200)]
Fix a memory leak in "connect.c" and die if command too long.
Use "add_to_string" instead of "sq_quote" and "snprintf", so
that there is no memory allocation and no memory leak.
Also check if the command is too long to fit into the buffer
and die if this is the case, instead of truncating it to the
buffer size.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 10 Sep 2006 22:36:04 +0000 (00:36 +0200)]
gitweb: Paginate history output
git_history output is now divided into pages, like git_shortlog,
git_tags and git_heads output. As whole git-rev-list output is now
read into array before writing anything, it allows for better
signaling of errors.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 10 Sep 2006 22:29:27 +0000 (00:29 +0200)]
gitweb: Make pickaxe search a feature
As pickaxe search (selected using undocumented 'pickaxe:' operator in
search query) is resource consuming, allow to turn it on/off using
feature meachanism. Turned on by default, for historical reasons.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Thu, 7 Sep 2006 11:48:49 +0000 (13:48 +0200)]
autoconf: Add support for setting NO_ICONV and ICONVDIR
Add support for ./configure options --without-iconv (if neither libc
nor libiconv properly support iconv), and for --with-iconv=PATH (to
set prefix to libiconv library and headers, used only when
NEED_LIBICONV is set). While at it, make ./configure set or unset
NO_ICONV always (it is not autodetected in Makefile).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Mon, 4 Sep 2006 05:42:32 +0000 (17:42 +1200)]
git-repack: create new packs inside $GIT_DIR, not cwd
Avoid failing when cwd is !writable by writing the
packfiles in $GIT_DIR, which is more in line with other commands.
Without this, git-repack was failing when run from crontab
by non-root user accounts. For large repositories, this
also makes the mv operation a lot cheaper, and avoids leaving
temp packfiles around the fs upon failure.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 6 Sep 2006 04:39:02 +0000 (21:39 -0700)]
Teach rev-list an option to read revs from the standard input.
When --stdin option is given, in addition to the <rev>s listed
on the command line, the command can read one rev parameter per
line from the standard input. The list of revs ends at the
first empty line or EOF.
Note that you still have to give all the flags from the command
line; only rev arguments (including A..B, A...B, and A^@ notations)
can be give from the standard input.
Junio C Hamano [Wed, 6 Sep 2006 04:28:36 +0000 (21:28 -0700)]
revision.c: allow injecting revision parameters after setup_revisions().
setup_revisions() wants to get all the parameters at once and
then postprocesses the resulting revs structure after it is done
with them. This code structure is a bit cumbersome to deal with
efficiently when we want to inject revision parameters from the
side (e.g. read from standard input).
Fortunately, the nature of this postprocessing is not affected by
revision parameters; they are affected only by flags. So it is
Ok to do add_object() after the it returns.
This splits out the code that deals with the revision parameter
out of the main loop of setup_revisions(), so that we can later
call it from elsewhere after it returns.
Andy Whitcroft [Tue, 5 Sep 2006 19:00:17 +0000 (20:00 +0100)]
send-pack: remove remote reference limit
When build a pack for a push we query the remote copy for existant
heads. These are used to prune unnecessary objects from the pack.
As we receive the remote references in get_remote_heads() we validate
the reference names via check_ref() which includes a length check;
rejecting those >45 characters in size.
This is a miss converted change, it was originally designed to reject
messages which were less than 45 characters in length (a 40 character
sha1 and refs/) to prevent comparing unitialised memory. check_ref()
now gets the raw length so check for at least 5 characters.
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Paul Mackerras [Mon, 4 Sep 2006 11:38:40 +0000 (21:38 +1000)]
diff-index --cc shows a 3-way diff between HEAD, index and working tree.
This implements a 3-way diff between the HEAD commit, the state in the
index, and the working directory. This is like the n-way diff for a
merge, and uses much of the same code. It is invoked with the -c flag
to git-diff-index, which it already accepted and did nothing with.
Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 5 Sep 2006 01:57:35 +0000 (18:57 -0700)]
Merge branch 'jc/pack'
* jc/pack:
more lightweight revalidation while reusing deflated stream in packing
pack-objects: fix thinko in revalidate code
pack-objects: re-validate data we copy from elsewhere.
Jakub Narebski [Mon, 4 Sep 2006 16:17:58 +0000 (18:17 +0200)]
gitweb: Divide page path into directories -- path's "breadcrumbs"
Divide page path into directories, so that each part of path links to
the "tree" view of the $hash_base (or HEAD, if $hash_base is not set)
version of the directory.
If the entity is blob, final part (basename) links to $hash_base or
HEAD revision of the "raw" blob ("blob_plain" view). If the entity is
tree, link to the "tree" view.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
If you try to fsck a repository that isn't entirely empty, but that has no
inter-object references (ie all the objects are blobs, and don't refer to
anything else), git-fsck-objects currently fails.
This probably cannot happen in practice, but can be tested with something
like
where the fsck will die by a divide-by-zero when it tries to look up the
references from the one object it found (hash_obj() will do a modulus by
refs_hash_size).
On some other archiectures (ppc, sparc) the divide-by-zero will go
unnoticed, and we'll instead SIGSEGV when we hit the "refs_hash[j]"
access.
So move the test that should protect against this from mark_reachable()
into lookup_object_refs(), which incidentally in the process also fixes
mark_reachable() itself (it used to not mark the one object that _was_
reachable, because it decided that it had no refs too early).
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 4 Sep 2006 04:09:18 +0000 (21:09 -0700)]
more lightweight revalidation while reusing deflated stream in packing
When copying from an existing pack and when copying from a loose
object with new style header, the code makes sure that the piece
we are going to copy out inflates well and inflate() consumes
the data in full while doing so.
The check to see if the xdelta really apply is quite expensive
as you described, because you would need to have the image of
the base object which can be represented as a delta against
something else.
Jakub Narebski [Sun, 3 Sep 2006 21:43:03 +0000 (23:43 +0200)]
gitweb: Change the name of diff to parent link in "commit" view to "diff
Change the name of diff to parent (current commit to one of parents)
link in "commit" view (git_commit subroutine) from "commitdiff" to
"diff". Let's leave "commitdiff" for equivalent of git-show, or
git-diff-tree with one revision, i.e. diff for a given commit to its
parent (parents).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 3 Sep 2006 21:44:46 +0000 (14:44 -0700)]
pack-objects: fix thinko in revalidate code
When revalidating an entry from an existing pack entry->size and
entry->type are not necessarily the size of the final object
when the entry is deltified, but for base objects they must
match.
Junio C Hamano [Sun, 3 Sep 2006 00:10:16 +0000 (17:10 -0700)]
Merge branch 'master' into cc/trace
* master:
Trace into a file or an open fd and refactor tracing code.
Replace uses of strdup with xstrdup.
consolidate two copies of new style object header parsing code.
Documentation: Fix howto/revert-branch-rebase.html generation
fmt-merge-msg: fix off-by-one bug
git-rev-list(1): group options; reformat; document more options
Constness tightening for move/link_temp_to_file()
gitweb: Fix git_blame
Include config.mak.autogen in the doc Makefile
Use xmalloc instead of malloc
git(7): move gitk(1) to the list of porcelain commands
gitk: Fix some bugs in the new cherry-picking code
gitk: Improve responsiveness while reading and layout out the graph
gitk: Update preceding/following tag info when creating a tag
gitk: Add a menu item for cherry-picking commits
gitk: Fix a couple of buglets in the branch head menu items
gitk: Add a context menu for heads
gitk: Add a row context-menu item for creating a new branch
gitk: Recompute ancestor/descendent heads/tags when rereading refs
gitk: Minor cleanups
Junio C Hamano [Fri, 1 Sep 2006 22:05:12 +0000 (15:05 -0700)]
pack-objects: re-validate data we copy from elsewhere.
When reusing data from an existing pack and from a new style
loose objects, we used to just copy it staight into the
resulting pack. Instead make sure they are not corrupt, but
do so only when we are not streaming to stdout, in which case
the receiving end will do the validation either by unpacking
the stream or by constructing the .idx file.
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 1 Sep 2006 22:17:01 +0000 (15:17 -0700)]
consolidate two copies of new style object header parsing code.
Also while we are at it, remove redundant typename[] array from
unpack_sha1_header. The only reason it is different from the
type_names[] array in object.c module is that this code cares
about the subset of object types that are valid in a loose
object, so prepare a separate array of boolean that tells us
which types are valid, and share the name translation with the
others.
The rule for howto/*.html used "$?", which expands to the list of all
newer prerequisites, including asciidoc.conf added by another rule.
"$<" should be used instead.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 1 Sep 2006 07:54:01 +0000 (00:54 -0700)]
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix some bugs in the new cherry-picking code
gitk: Improve responsiveness while reading and layout out the graph
gitk: Update preceding/following tag info when creating a tag
gitk: Add a menu item for cherry-picking commits
gitk: Fix a couple of buglets in the branch head menu items
gitk: Add a context menu for heads
gitk: Add a row context-menu item for creating a new branch
gitk: Recompute ancestor/descendent heads/tags when rereading refs
gitk: Minor cleanups
Christian Couder [Thu, 31 Aug 2006 06:42:11 +0000 (08:42 +0200)]
Trace into open fd and refactor tracing code.
Now if GIT_TRACE is set to an integer value greater than 1
and lower than 10, we interpret this as an open fd value
and we trace into it. Note that this behavior is not
compatible with the previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
It's now possible to run the tests like this:
GIT_TRACE=9 make test 9>/var/tmp/trace.log
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 31 Aug 2006 21:14:20 +0000 (14:14 -0700)]
t5710: fix two thinkos.
The intention of the test seems to be to build a long chain of
clones that locally borrow objects from their parents and see the
system give up dereferencing long chains. There were two problems:
(1) it did not test the right repository;
(2) it did not build a chain long enough to trigger the limitation.
I do not think it is a good test to make sure the limitation the
current implementation happens to have still exists, but that is
a topic at a totally different level.
Jakub Narebski [Wed, 30 Aug 2006 22:36:04 +0000 (00:36 +0200)]
gitweb: Extend parse_difftree_raw_line to save commit info
Extend parse_difftree_raw_line to save commit info from when
git-diff-tree is given only one <tree-ish>, for example when fed
from git-rev-list using --stdin option.
git-diff-tree outputs a line with the commit ID when applicable.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Dennis Stosberg [Tue, 29 Aug 2006 07:19:02 +0000 (09:19 +0200)]
use do() instead of require() to include configuration
When run under mod_perl, require() will read and execute the configuration
file on the first invocation only. On every subsequent invocation, all
configuration variables will be reset to their default values. do() reads
and executes the configuration file unconditionally.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Dennis Stosberg [Thu, 31 Aug 2006 19:32:45 +0000 (21:32 +0200)]
gitweb: Remove forgotten call to git_to_hash
On Aug 27th, Jakub Narebski sent a patch which removed the git_to_hash()
function and this call to it. The patch did not apply cleanly and had to
be applied manually. Removing the last chunk has obviously been forgotten.
Franck Bui-Huu [Tue, 29 Aug 2006 11:37:06 +0000 (13:37 +0200)]
log-tree.c: cleanup a bit append_signoff()
This patch clean up append_signoff() by moving specific code that
looks up for "^[-A-Za-z]+: [^@]+@" pattern into a function.
It also stops the primary search when the cursor oversteps
'buf + at' limit.
This patch changes slightly append_signoff() behaviour too. If we
detect any Signed-off-by pattern during the primary search, we
needn't to do a pattern research after.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Tue, 29 Aug 2006 18:47:30 +0000 (11:47 -0700)]
git-fsck-objects: lacking default references should not be fatal
The comment added says it all: if we have lost all references in a git
archive, git-fsck-objects should still work, so instead of dying it should
just notify the user about that condition.
This change was triggered by me just doing a "git-init-db" and then
populating that empty git archive with a pack/index file to look at it.
Having git-fsck-objects not work just because I didn't have any references
handy was rather irritating, since part of the reason for running
git-fsck-objects in the first place was to _find_ the missing references.
However, "--unreachable" really doesn't make sense in that situation, and
we want to turn it off to protect anybody who uses the old "git prune"
shell-script (rather than the modern built-in). The old pruning script
used to remove all objects that were reported as unreachable, and without
any refs, that obviously means everything - not worth it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 28 Aug 2006 21:17:31 +0000 (23:17 +0200)]
gitweb: Add local time and timezone to git_print_authorship
Add local time (hours and minutes) and local timezone to the output of
git_print_authorship command, used by git_commitdiff. The code was
taken from git_commit subroutine.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 28 Aug 2006 12:48:14 +0000 (14:48 +0200)]
gitweb: Add diff tree, with links to patches, to commitdiff view
Added/uncommented git_difftree_body invocation in git_commitdiff.
Added anchors (via 'id' attribute) to patches in patchset.
git_difftree_body is modified to link to patch anchor when called from
git_commitdiff, instead of link to blobdiff.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 28 Aug 2006 12:48:11 +0000 (14:48 +0200)]
gitweb: Do not remove signoff lines in git_print_simplified_log
Remove '-remove_signoff => 1' option to git_print_log call in the
git_print_simplified_log subroutine. This means that in "log" and
"commitdiff" views (git_log and git_commitdiff subroutines) signoff
lines will be shown.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 28 Aug 2006 12:48:10 +0000 (14:48 +0200)]
gitweb: Make git_print_log generic; git_print_simplified_log uses it
Collapse git_print_log and git_print_simplified_log into one
subroutine git_print_log. git_print_simplified_log now simply calls
git_print_log with proper options.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 28 Aug 2006 23:20:28 +0000 (16:20 -0700)]
Merge branch 'gl/web'
* gl/web: (46 commits)
gitweb: Use @diff_opts, default ('M'), as git-diff and git-diff-tree paramete
gitweb: Remove git_to_hash function
gitweb: Remove unused git_get_{preceding,following}_references
gitweb: Fix typo in git_patchset_body
gitweb: Fix typo in git_difftree_body
gitweb: blobs defined by non-textual hash ids can be cached
gitweb: Improve comments about gitweb features configuration
gitweb: Remove workaround for git-diff bug fixed in f82cd3c
gitweb: Remove creating directory for temporary files
gitweb: Remove git_diff_print subroutine
gitweb: git_blobdiff_plain is git_blobdiff('plain')
gitweb: Use git-diff-tree or git-diff patch output for blobdiff
gitweb: Change here-doc back for style consistency in git_blobdiff
gitweb: Always display link to blobdiff_plain in git_blobdiff
gitweb: Add invisible hyperlink to from-file/to-file diff header
gitweb: Parse two-line from-file/to-file diff header in git_patchset_body
gitweb: Allow for pre-parsed difftree info in git_patchset_body
gitweb: Add support for hash_parent_base parameter for blobdiffs
gitweb: Use git_get_name_rev_tags for commitdiff_plain X-Git-Tag: header
gitweb: Add git_get_rev_name_tags function
...
Paul Mackerras [Mon, 28 Aug 2006 12:41:09 +0000 (22:41 +1000)]
gitk: Fix some bugs in the new cherry-picking code
When inserting the new commit row for the cherry-picked commit, we weren't
advancing the selected line (if there is one), and we weren't updating
commitlisted properly.
Junio C Hamano [Mon, 21 Aug 2006 02:03:13 +0000 (19:03 -0700)]
daemon: prepare for multiple services.
This adds an infrastructure to selectively enable and disable
more than one services in git-daemon. Currently upload-pack
service, which serves the git-fetch-pack and git-peek-remote
clients, is the only service that is defined.
Junio C Hamano [Mon, 28 Aug 2006 03:18:58 +0000 (20:18 -0700)]
Merge branch 'js/c-merge-recursive'
* js/c-merge-recursive: (21 commits)
discard_cache(): discard index, even if no file was mmap()ed
merge-recur: do not die unnecessarily
merge-recur: try to merge older merge bases first
merge-recur: if there is no common ancestor, fake empty one
merge-recur: do not setenv("GIT_INDEX_FILE")
merge-recur: do not call git-write-tree
merge-recursive: fix rename handling
.gitignore: git-merge-recur is a built file.
merge-recur: virtual commits shall never be parsed
merge-recur: use the unpack_trees() interface instead of exec()ing read-tree
merge-recur: fix thinko in unique_path()
Makefile: git-merge-recur depends on xdiff libraries.
merge-recur: Explain why sha_eq() and struct stage_data cannot go
merge-recur: Cleanup last mixedCase variables...
merge-recur: Fix compiler warning with -pedantic
merge-recur: Remove dead code
merge-recur: Get rid of debug code
merge-recur: Convert variable names to lower_case
Cumulative update of merge-recursive in C
recur vs recursive: help testing without touching too many stuff.
...
This is an evil merge that removes TEST script from the toplevel.
Junio C Hamano [Sun, 27 Aug 2006 22:53:20 +0000 (15:53 -0700)]
git-apply --reject: finishing touches.
After a failed "git am" attempt:
git apply --reject --verbose .dotest/patch
applies hunks that are applicable and leaves *.rej files the
rejected hunks, and it reports what it is doing. With --index,
files with a rejected hunk do not get their index entries
updated at all, so "git diff" will show the hunks that
successfully got applied.
Without --verbose to remind the user that the patch updated some
other paths cleanly, it is very easy to lose track of the status
of the working tree, so --reject implies --verbose.
Jakub Narebski [Sun, 27 Aug 2006 21:49:36 +0000 (23:49 +0200)]
gitweb: Use @diff_opts, default ('M'), as git-diff and git-diff-tree paramete
Added new global configuration variable @diff_opts, which holds
additional options (parameters) to git-diff and git-diff-tree, usually
dealing rename/copying detection. Default value is '-M', taken from
git_commit subroutine. Description of options and their approximate
cost by Junio C Hamano.
Changes:
* git_commitdiff, git_blobdiff and git_blobdiff_plain now use '-M'
instead of '-M', '-C'
* git-diff now uses the same options as git-diff-tree
* git_comittdiff_plain now uses '-M' instead of '-B'
and is now rename-aware
* git_rss uses now '-M' instead of ()
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 27 Aug 2006 21:45:26 +0000 (23:45 +0200)]
gitweb: Remove git_to_hash function
Remove git_to_hash function, which was to translate symbolic reference
to hash, and it's use in git_blobdiff. We don't try so hard to guess
filename if it was not provided.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Sat, 26 Aug 2006 22:45:26 +0000 (15:45 -0700)]
Relative timestamps in git log
I noticed that I was looking at the kernel gitweb output at some point
rather than just do "git log", simply because I liked seeing the
simplified date-format, ie the "5 days ago" rather than a full date.
This adds infrastructure to do that for "git log" too. It does NOT add the
actual flag to enable it, though, so right now this patch is a no-op, but
it should now be easy to add a command line flag (and possibly a config
file option) to just turn on the "relative" date format.
The exact cut-off points when it switches from days to weeks etc are
totally arbitrary, but are picked somewhat to avoid the "1 weeks ago"
thing (by making it show "10 days ago" rather than "1 week", or "70
minutes ago" rather than "1 hour ago").
[jc: with minor fix and tweak around "month" and "week" area.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Rene Scharfe [Sat, 26 Aug 2006 21:19:21 +0000 (23:19 +0200)]
Add git-zip-tree
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jonas Fonseca [Sat, 26 Aug 2006 14:16:18 +0000 (16:16 +0200)]
Use xrealloc instead of realloc
Change places that use realloc, without a proper error path, to instead use
xrealloc. Drop an erroneous error path in the daemon code that used errno
in the die message in favour of the simpler xrealloc.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:12:27 +0000 (04:12 -0400)]
Convert unpack_entry_gently and friends to use offsets.
Change unpack_entry_gently and its helper functions to use offsets
rather than addresses and left counts to supply pack position
information. In most cases this makes the code easier to follow,
and it reduces the number of local variables in a few functions.
It also better prepares this code for mapping partial segments of
packs and altering what regions of a pack are mapped while unpacking
an entry.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:12:04 +0000 (04:12 -0400)]
Cleanup unpack_object_header to use only offsets.
If we're always incrementing both the offset and the pointer we
aren't gaining anything by keeping both. Instead just use the
offset since that's what we were given and what we are expected
to return. Also using offset is likely to make it easier to remap
the pack in the future should partial mapping of very large packs
get implemented.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:11:36 +0000 (04:11 -0400)]
Cleanup unpack_entry_gently and friends to use type_name array.
[PATCH 3/5] Cleanup unpack_entry_gently and friends to use type_name array.
This change allows combining all of the non-delta entries into a
single case, as well as to remove an unnecessary local variable
in unpack_entry_gently.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:11:02 +0000 (04:11 -0400)]
Reuse compression code in unpack_compressed_entry.
[PATCH 2/5] Reuse compression code in unpack_compressed_entry.
This cleans up the code by reusing a perfectly good decompression
implementation at the expense of 1 extra byte of memory allocated in
temporary memory while the delta is being decompressed and applied
to the base.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:10:43 +0000 (04:10 -0400)]
Reorganize/rename unpack_non_delta_entry to unpack_compressed_entry.
This function was moved above unpack_delta_entry so we can call it
from within unpack_delta_entry without a forward declaration.
This change looks worse than it is. Its really just a relocation
of unpack_non_delta_entry to earlier in the file and renaming the
function to unpack_compressed_entry. No other changes were made.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>