perf trace: Rename thread_thread->paths to thread_trace->files
So that we can add more per file attributes besides the pathname, such
as which ioctl beautifier to use, for cases such as the sound and
usbdeffs ioctls, that both use the 'U' command, so we have to
differentiate at the major number for the device file.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-1895cmhrdz2dkl5prf2cj2yj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Tue, 20 Nov 2018 05:06:17 +0000 (21:06 -0800)]
perf script: Fix LBR skid dump problems in brstackinsn
This is a fix for another instance of the skid problem Milian recently
found [1]
The LBRs don't freeze at the exact same time as the PMI is triggered.
The perf script brstackinsn code that dumps LBR assembler assumes that
the last branch in the LBR leads to the sample point. But with skid
it's possible that the CPU executes one or more branches before the
sample, but which do not appear in the LBR.
What happens then is either that the sample point is before the last LBR
branch. In this case the dumper sees a negative length and ignores it.
Or it the sample point is long after the last branch. Then the dumper
sees a very long block and dumps it upto its block limit (16k bytes),
which is noise in the output.
On typical sample session this can happen regularly.
This patch tries to detect and handle the situation. On the last block
that is dumped by the LBR dumper we always stop on the first branch. If
the block length is negative just scan forward to the first branch.
Otherwise scan until a branch is found.
The PT decoder already has a function that uses the instruction decoder
to detect branches, so we can just reuse it here.
Then when a terminating branch is found print an indication and stop
dumping. This might miss a few instructions, but at least shows no
runaway blocks.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Link: http://lkml.kernel.org/r/20181120050617.4119-1-andi@firstfloor.org
[ Resolved conflict with dd2e18e9ac20 ("perf tools: Support 'srccode' output") ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 26 Dec 2018 11:21:21 +0000 (12:21 +0100)]
perf python: Do not force closing original perf descriptor in evlist.get_pollfd()
Ondřej reported that when compiled with python3, the python extension
regresses in evlist.get_pollfd function behaviour.
The evlist.get_pollfd function creates file objects from evlist's fds
and returns them in a list. The python3 version also sets them to 'close
the original descriptor' when the object dies (is closed), by passing
True via the 'closefd' arg in the PyFile_FromFd call.
The python's closefd doc says:
If closefd is False, the underlying file descriptor will be kept open
when the file is closed.
That's why the following line in python3 closes all evlist fds:
evlist.get_pollfd()
the returned list is immediately destroyed and that takes down the
original events fds.
Passing closefd as False to PyFile_FromFd to fix this.
Reported-by: Ondřej Lysoněk <olysonek@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jaroslav Škarvada <jskarvad@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 66dfdff03d19 ("perf tools: Add Python 3 support") Link: http://lkml.kernel.org/r/20181226112121.5285-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Colin Ian King [Fri, 21 Dec 2018 08:48:09 +0000 (08:48 +0000)]
perf trace: Use correct SECCOMP prefix spelling, "SECOMP_*" -> "SECCOMP_*"
The spelling of the SECCOMP is incorrect, fix these.
Signed-off-by: Colin King <colin.king@canonical.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-janitors@vger.kernel.org Fixes: c65c83ffe904 ("perf trace: Allow asking for not suppressing common string prefixes") Link: http://lkml.kernel.org/r/20181221084809.6108-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Do not hardcode the size of the tracepoint common_ fields
We shouldn't hardcode the size of the tracepoint common_ fields, use the
offset of the 'id'/'__syscallnr' field in the sys_enter event instead.
This caused the augmented syscalls code to fail on a particular build of a
PREEMPT_RT_FULL kernel where these extra 'common_migrate_disable' and
'common_padding' fields were before the syscall id one:
All those 'common_' prefixed fields are zeroed when they hit a BPF tracepoint
hook, we better just discard those, i.e. somehow pass an offset to the
BPF program from the start of the ctx and make adjustments in the 'perf trace'
handlers to adjust the offset of the syscall arg offsets obtained from tracefs.
Till then, fix it the quick way and add this to the augmented_raw_syscalls.c to
bet it to work in such kernels:
struct syscall_enter_args {
unsigned long long common_tp_fields;
+ long rt_common_tp_fields;
long syscall_nr;
unsigned long args[6];
};
struct syscall_exit_args {
unsigned long long common_tp_fields;
+ long rt_common_tp_fields;
long syscall_nr;
long ret;
};
Just to check that this was the case. Fix it properly later, for now remove the
hardcoding of the offset in the 'perf trace' side and document the situation
with this patch.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2pqavrktqkliu5b9nzouio21@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz
Current libbfd feature test unconditionally links against -liberty and -lz.
While it's required on some systems (e.g. opensuse), it's completely
unnecessary on the others, where only -lbdf is sufficient (debian).
This patch streamlines (and renames) the following feature checks:
feature-libbfd - only link against -lbfd (debian),
see commit 2cf9040714f3 ("perf tools: Fix bfd
dependency libraries detection")
feature-libbfd-liberty - link against -lbfd and -liberty
feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse),
see commit 280e7c48c3b8 ("perf tools: fix BFD
detection on opensuse")
(feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z}
for clarity)
The main motivation is to fix this feature test for bpftool which is
currently broken on debian (libbfd feature shows OFF, but we still
unconditionally link against -lbfd and it works).
Tested on debian with only -lbfd installed (without -liberty); I'd
appreciate if somebody on the other systems can test this new detection
method.
Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-nt49d6iqle80cw8f529ovaqi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Check if the raw_syscalls:sys_{enter,exit} are setup before setting tp filter
While updating 'perf trace' on an machine with an old precompiled
augmented_raw_syscalls.o that didn't setup the syscall map the new 'perf
trace' codebase notices the augmented_raw_syscalls.o eBPF event, decides
to use it instead of the old raw_syscalls:sys_{enter,exit} method, but
then because we don't have the syscall map tries to set the tracepoint
filter on the sys_{enter,exit} evsels, that are NULL, segfaulting.
Make the code more robust by checking it those tracepoints have
their respective evsels in place before trying to set the tp filter.
With this we still get everything to work, just not setting up the
syscall filters, which is better than a segfault. Now to update the
precompiled augmented_raw_syscalls.o and continue development :-)
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-3ft5rjdl05wgz2pwpx2z8btu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Thu, 20 Dec 2018 17:51:47 +0000 (18:51 +0100)]
Merge tag 'perf-core-for-mingo-4.21-20181218' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Implement BPF based syscall filtering in 'perf trace', using BPF maps and
the augmented_raw_syscalls.c BPF proggie (Arnaldo Carvalho de Melo)
- Allow specifying in .perfconfig a set of events use in 'perf trace' in
addition to any other specified from the command line. This initially
will be used to always use the augmented_raw_syscalls.o precompiled
BPF program for getting pointer contents. (Arnaldo Carvalho de Melo)
- Allow fine grained control about how the syscall output should be
formatted. This will be used to allow producing the same output produced
by the 'strace' tool, to then use in regression tests comparing the
output of 'perf trace' with the one produced from 'strace' (Arnaldo Carvalho de Melo)
- Beautify the renameat2 olddirfd, newdirfd and flags arguments (Arnaldo Carvalho de Melo)
- Beautify arch_prctl 'code' syscall arg (Arnaldo Carvalho de Melo)
- Beautify fadvise64 'advice' syscall arg (Arnaldo Carvalho de Melo)
- Relax checks on perf-PID.map ownership, resulting in symbols in
executable anonymous maps setup by JITs in things like node.js to
be resolved in a 'perf top' session run by root without the need
for --force to be used (Arnaldo Carvalho de Melo)
- Update asm-generic/unistd.h copy (Arnaldo Carvalho de Melo)
- Do not use the first and last symbols when setting up address filters in
auxtrace, this fails when we don't have a symbol table, filter the entire
area based on the dso size. (Adrian Hunter)
- Do not use kernel headers to build libsubcmd, we shouldn't use
anything from outside tools/, fixes the build with the Android NDK (Arnaldo Carvalho de Melo)
- Add several prototypes for systems lacking those, such as open_memstream(),
sigqueue(), fixing warnings building with Android's bionic libc that were
preventing the use of -Werror there (Arnaldo Carvalho de Melo)
- Use LDFLAGS in the libtraceevent build commands, allowing developers
to override its values (Jiri Olsa)
- Link libperf-jvmti.so with LDFLAGS variable, allowing distro
packages to propagate its settings when building this library (Jiri Olsa)
- cs-etm (ARM CoreSight) fixes: (Leo Yan)
- Correct packets swapping in cs_etm__flush()
- Avoid stale branch samples when flush packet
- Remove unused 'trace_on' in cs_etm_decoder
- Refactor enumeration cs_etm_sample_type
- Rename CS_ETM_TRACE_ON to CS_ETM_DISCONTINUITY
- Treat NO_SYNC element as trace discontinuity
- Treat EO_TRACE element as trace discontinuity
- Generate branch sample for exception packet
- Use shebangs in the 'perf test' shell scripts, making them identifiable as
shell scripts (Michael Petlan)
- Avoid segfaults caused by negated options in 'perf stat' (Michael Petlan)
- Fix processing of dereferenced args in bprintk events in libtracevent (Steven Rostedt)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-2e7xwm5i2qcc88jp2lyawdyd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf symbols: Relax checks on perf-PID.map ownership
Those are simple enough, and usually not produced by root, instead by
whatever user is running java, rust, Node.js JIT code that end up
generating those /tmp/perf-PID.map for resolution of symbols in the
anonymous executable maps.
Having to use --force to resolve symbols in 'perf top' is a distraction,
as recently I experienced when node.js symbols were not being resolved
by 'perf top'.
Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hítalo Silva <hitalos@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-tk2jgo2v4v2yjuj28axbpppo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zwbslubagram8a8zdc003u8h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-tb7jguv01u8p570piq13eioh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to generate the string table for fadvise64's 'advice'
argument.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-muswpnft8q9krktv052yrgsc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-27qhouo1kaac2iyl85nfnsf5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf beauty mmap: Print PROT_READ before PROT_EXEC to match strace output
Helps with comparing 'strace' and 'perf trace' output, for mutual
regression testing.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-va0qe95xbhep5hy52aq5qe0v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This actually so far, AFAIK is available only in x86, so the code was
put in place with x86 prefixes, in arches where it is not available it
will just not be called, so no further mechanisms are needed at this
time.
Later, when other arches wire this up, we'll just look at the uname
(live sessions) or perf_env data in the perf.data header to auto-wire
the right beautifier.
With this the output is the same as produced by 'strace' when used with
the following ~/.perfconfig:
And that seems to be related to the CET/Shadow Stack feature, that
userland in Fedora 29 (glibc 2.28) are querying the kernel about, that
0x3001 seems to be ARCH_CET_STATUS, I'll check the situation and test
with a fedora 29 kernel to see if the other codes are used.
A diff that ignores the different pointers for different runs needs to
be put in place in the upcoming regression tests comparing 'perf trace's
output to strace's.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-73a9prs8ktkrt97trtdmdjs8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kx59j2dk5l1x04ou57mt99ck@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Move strarrays to beauty.h for further reuse
We'll use it in the upcoming arch_prctl() 'code' arg beautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-6e4tj2fjen8qa73gy4u49vav@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-3r9blij6n8wdlsyd5dujx86r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-w0fux1psivphhx6rve8kn3vq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need it to generate the tables for the 'code' arch_prctl's syscall
argument.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-vu890pi18fpd4eyz61cazckj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Show NULL when syscall pointer args are 0
Matching strace's output format. The 'format' file for the syscall
tracepoints have an indication if the arg is a pointer, with some
exceptions like 'mmap' that has its first arg as an 'unsigned long', so
use a heuristic using the argument name, i.e. if it contains the 'addr'
substring, format it with the pointer formatter.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ddghemr8qrm6i0sb8awznbze@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match strace, now both emit the same line for calls like:
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-krxl6klsqc9qyktoaxyih942@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf augmented_raw_syscalls: Copy 'access' arg as well
This will all come from userspace, but to test the changes to make 'perf
trace' output similar to strace's, do this one more now manually.
To update the precompiled augmented_raw_syscalls.o binary I just run:
# perf record -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB perf.data ]
#
Because to have augmented_raw_syscalls to be always used and a fast
startup and remove the need to have the llvm toolchain installed, I'm
using:
So when doing changes to augmented_raw_syscals.c one needs to rebuild
the .o file.
This will be done automagically later, i.e. have a 'make' behaviour of
recompiling when the .c gets changed.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-lw3i2atyq8549fpqwmszn3qp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Add alignment spaces after the closing parens
To use strace's style, helping in comparing the output of 'perf trace'
with the one from 'strace', to help in upcoming regression tests.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-mw6peotz4n84rga0fk78buff@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ofovpmvdli3bwch30936xn7t@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Allow asking for not suppressing common string prefixes
So far we've been suppressing common stuff such as "MAP_" in the mmap
flags, showing "SHARED" instead of "MAP_SHARED", allow for those
prefixes (and a few suffixes) to be shown:
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-mtn1i4rjowjl72trtnbmvjd4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Add a prefix member to the strarray class
So that the user, in an upcoming patch, can select printing it to get
the full string as used in the source code, not one with a common prefix
chopped off so as to make the output more compact.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zypczc88gzbmeqx7b372s138@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match 'strace' output, helping with upcoming regression tests
comparing both outputs.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jab52t1dcuh6vlztqle9g7u9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Make the alignment of the syscall args be configurable
Since the start 'perf trace' aligns the parens enclosing the list of
syscall args to align the syscall results, allow this to be
configurable, keeping the default of 70. Using:
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-r8cbhoz1lr5npq9tutpvoigr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ta9tbdwgodpw719sr2bjm8eb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-mjjnicy48367jah6ls4k0nk8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Allow configuring default for perf_event_attr.inherit
I.f. if children should inherit the parent perf_event configuration,
i.e. if we should trace children as well or just the parent.
The default is to follow children, to disable this and have a behaviour
similar to strace, set this config option or use the --no_inherit 'perf
trace' option.
Notice that since there is just one thread, the "comm/TID" column is
suppressed.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-thd8s16pagyza71ufi5vjlan@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-l, --list show current config variables
--system use system config file
--user use user config file
#
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-z2n63avz6tliqb5gmu4l1dti@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2c7h1m8fhzb9puxtj9nlevi8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Allow configuring if zeroed syscall args should be printed
The default so far, since we show argument names followed by its values,
was to make the output more compact by suppressing most zeroed args.
Make this configurable so that users can choose what best suit their
needs.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-q0gxws02ygodh94o0hzim5xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Allow specifying a set of events to add in perfconfig
To add augmented_raw_syscalls to the events speficied by the user, or be
the only one if no events were specified by the user, one can add this
to perfconfig:
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-0lgj7vh64hg3ce44gsmvj7ud@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf augmented_raw_syscalls: Do not include stdio.h
We're not using that puts() thing, and thus we don't need to define the
__bpf_stdout__ map, reducing the setup time.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-3452xgatncpil7v22minkwbo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Tue, 11 Dec 2018 07:38:28 +0000 (15:38 +0800)]
perf cs-etm: Generate branch sample for exception packet
The exception packet appears as one element with 'elem_type' ==
OCSD_GEN_TRC_ELEM_EXCEPTION or OCSD_GEN_TRC_ELEM_EXCEPTION_RET, which is
present for exception entry and exit respectively. The decoder sets the
packet fields 'packet->exc' and 'packet->exc_ret' to indicate the
exception packets; but exception packets don't have a dedicated sample
type and shares the same sample type CS_ETM_RANGE with normal
instruction packets.
As a result, the exception packets are taken as normal instruction
packets and this introduces confusion in mixing different packet types.
Furthermore, these instruction range packets will be processed for
branch samples only when 'packet->last_instr_taken_branch' is true,
otherwise they will be omitted, this can introduce a mess for exception
and exception returning due to not having the complete address range
info for context switching.
To process exception packets properly, this patch introduces two new
sample types: CS_ETM_EXCEPTION and CS_ETM_EXCEPTION_RET; these two types
of packets will be handled by cs_etm__exception(). The function
cs_etm__exception() forces setting the previous CS_ETM_RANGE packet flag
'prev_packet->last_instr_taken_branch' to true, this matches well with
the program flow when the exception is trapped from user space to kernel
space, no matter if the most recent flow has branch taken or not; this
is also safe for returning to user space after exception handling.
After exception packets have their own sample type, the packet fields
'packet->exc' and 'packet->exc_ret' aren't needed anymore, so remove
them.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight ml <coresight@lists.linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-9-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Tue, 11 Dec 2018 07:38:27 +0000 (15:38 +0800)]
perf cs-etm: Treat EO_TRACE element as trace discontinuity
If the decoder outputs an EO_TRACE element, it means the end of the
trace buffer; this is a discontinuity and in this case the end of trace
data needs to be saved.
This patch generates a CS_ETM_DISCONTINUITY packet for the EO_TRACE
element hereby flushing the end of trace data in cs-etm.c.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-8-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Tue, 11 Dec 2018 07:38:26 +0000 (15:38 +0800)]
perf cs-etm: Treat NO_SYNC element as trace discontinuity
The CoreSight tracer driver might insert barrier packets between
different buffers, thus the decoder can spot the boundaries based on the
barrier packet; it is possible for the decoder to hit a barrier packet
and emit a NO_SYNC element, then the decoder will find a periodic
synchronisation point inside that next trace block that starts the trace
again but does not have the TRACE_ON element as indicator - usually
because this trace block has wrapped the buffer so we have lost the
original point when the trace was enabled.
In the first case it causes the insertion of a OCSD_GEN_TRC_ELEM_NO_SYNC
in the middle of the tracing stream, but as we were not handling the
NO_SYNC element properly this ends up making users miss the
discontinuity indications.
Though OCSD_GEN_TRC_ELEM_NO_SYNC is different from CS_ETM_TRACE_ON when
output from the decoder, both indicate that the trace data is
discontinuous; this patch treats OCSD_GEN_TRC_ELEM_NO_SYNC as a trace
discontinuity and generates a CS_ETM_DISCONTINUITY packet for it, so
cs-etm can handle the discontinuity for this case, finally it saves the
last trace data for the previous trace block and restart samples for the
new block.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight ml <coresight@lists.linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-7-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Tue, 11 Dec 2018 07:38:25 +0000 (15:38 +0800)]
perf cs-etm: Rename CS_ETM_TRACE_ON to CS_ETM_DISCONTINUITY
TRACE_ON element is used at the beginning of trace, it also can be
appeared in the middle of trace data to indicate discontinuity; for
example, it's possible to see multiple TRACE_ON elements in the trace
stream if the trace is being limited by address range filtering.
Furthermore, except TRACE_ON element is for discontinuity, NO_SYNC and
EO_TRACE also can be used to indicate discontinuity, though they are
used for different scenarios for which the trace is interrupted.
This patch renames sample type CS_ETM_TRACE_ON to CS_ETM_DISCONTINUITY,
firstly the new name describes more closely the purpose of the packet;
secondly this is a preparation for other output elements which also
cause the trace discontinuity thus they can share the same one packet
type.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-6-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The values in enumeration cs_etm_sample_type are defined with setting
bit N for each packet type, this is not suggested in the usual case.
This patch refactor cs_etm_sample_type by converting from bit shifting
values to continuous numbers.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-5-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Tue, 11 Dec 2018 07:38:22 +0000 (15:38 +0800)]
perf cs-etm: Avoid stale branch samples when flush packet
At the end of trace buffer handling, function cs_etm__flush() is invoked
to flush any remaining branch stack entries. As a side effect, it also
generates branch sample, because the 'etmq->packet' doesn't contains any
new coming packet but point to one stale packet after packets swapping,
so it wrongly makes synthesize branch samples with stale packet info.
We could review below detailed flow which causes issue:
Packet1 and packet2 are two continuous packets, when packet2 is the new
coming packet, cs_etm__sample() generates branch sample for these two
packets and use [packet1::end_addr - 4 => packet2::start_addr] as branch
jump flow, thus we can see the first generated branch sample in step 1.
At the end of cs_etm__sample() it swaps packets so 'etm->prev_packet'=
packet2 and 'etm->packet'=packet1, so far it's okay for branch sample.
If packet2 is the last one packet in trace buffer, even there have no
any new coming packet, cs_etm__run_decoder() invokes cs_etm__flush() to
flush branch stack entries as expected, but it also generates branch
samples by taking 'etm->packet' as a new coming packet, thus the branch
jump flow is as [packet2::end_addr - 4 => packet1::start_addr]; this
is the second sample which is generated in step 2. So actually the
second sample is a stale sample and we should not generate it.
This patch introduces a new function cs_etm__end_block(), at the end of
trace block this function is invoked to only flush branch stack entries
and thus can avoid to generate branch sample for stale packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-3-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Tue, 11 Dec 2018 07:38:21 +0000 (15:38 +0800)]
perf cs-etm: Correct packets swapping in cs_etm__flush()
The structure cs_etm_queue uses 'prev_packet' to point to previous
packet, this can be used to combine with new coming packet to generate
samples.
In function cs_etm__flush() it swaps packets only when the flag
'etm->synth_opts.last_branch' is true, this means that it will not swap
packets if without option '--itrace=il' to generate last branch entries;
thus for this case the 'prev_packet' doesn't point to the correct
previous packet and the stale packet still will be used to generate
sequential sample. Thus if dump trace with 'perf script' command we can
see the incorrect flow with the stale packet's address info.
This patch corrects packets swapping in cs_etm__flush(); except using
the flag 'etm->synth_opts.last_branch' it also checks the another flag
'etm->sample_branches', if any flag is true then it swaps packets so can
save correct content to 'prev_packet'. Finally this can fix the wrong
program flow dumping issue.
The patch has a minor refactoring to use 'etm->synth_opts.last_branch'
instead of 'etmq->etm->synth_opts.last_branch' for condition checking,
this is consistent with that is done in cs_etm__sample().
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-2-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Switch to using a struct for the aumented_raw_syscalls syscalls map values
We'll start adding more perf-syscall stuff, so lets do this prep step so
that the next ones are just about adding more fields.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-vac4sn1ns1vj4y07lzj7y4b8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf bpf: Move perf_event_output() from stdio.h to bpf.h
So that we don't always carry that __bpf_output__ map, leaving that to
the scripts wanting to use that facility.
'perf trace' will be changed to look if that map is present and only
setup the bpf-output events if so.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-azwys8irxqx9053vpajr0k5h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
What is it that this gsd-housekeeping thingy needs to open
/proc/self/mountinfo four times periodically? :-)
This map will be extended to tell per-syscall parameters, i.e. how many
bytes to copy per arg, using the function signature to get the types and
then the size of those types, via BTF.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-cy222g9ucvnym3raqvxp0hpg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Avoid using raw_syscalls in duplicity with eBPF augmentation
So when we do something like:
# perf trace -e open*,augmented_raw_syscalls.o
We need to set trace->trace_syscalls because there is logic that use
that when mixing strace-like output with other events, such as scheduler
tracepoints, but with that set we ended up having multiple
raw_syscalls:sys_{enter,exit} setup, which garbled the output, so
check if trace->augmented_raw_syscalls is set and avoid the two extra
tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kjmnbrlgu0c38co1ye8egbsb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Rename set_ev_qualifier_filter to clarify its a tracepoint filter
Rename it to trace__set_ev_qualifier_tp_filter(), as this just sets up
tracepoint filters on the raw_syscalls:sys_{enter,exit} tracepoints, and
since we're going to do the same for the augmented_raw_syscalls
codepath, when used, rename it to clarify.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-8bjsul8x7osw7nxjodnyfn14@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 12 Dec 2018 13:29:40 +0000 (14:29 +0100)]
perf tools: Link libperf-jvmti.so with LDFLAGS variable
So we could propagate distro flags into libperf-jvmti.so library.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181212132940.840-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Cast off_t to s64 to avoid warning on bionic libc
To avoid this warning:
CC /tmp/build/perf/util/s390-cpumsf.o
util/s390-cpumsf.c: In function 's390_cpumsf_samples':
util/s390-cpumsf.c:508:3: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'off_t' [-Wformat=]
pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n",
^
Now the various Android cross toolchains used in the perf tools
container test builds are all clean and we can remove this:
export EXTRA_MAKE_ARGS="WERROR=0"
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lkml.kernel.org/n/tip-5rav4ccyb0sjciysz2i4p3sx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Add missing open_memstream() prototype for systems lacking it
There are systems such as the Android NDK API level 24 has the
open_memstream() function but doesn't provide a prototype, adding noise
to the build:
builtin-timechart.c: In function 'cat_backtrace':
builtin-timechart.c:486:2: warning: implicit declaration of function 'open_memstream' [-Wimplicit-function-declaration]
FILE *f = open_memstream(&p, &p_len);
^
builtin-timechart.c:486:2: warning: nested extern declaration of 'open_memstream' [-Wnested-externs]
builtin-timechart.c:486:12: warning: initialization makes pointer from integer without a cast
FILE *f = open_memstream(&p, &p_len);
^
Define a LACKS_OPEN_MEMSTREAM_PROTOTYPE define so that code needing that
can get a prototype.
Checked in the bionic git repo to be available since level 23:
Reducing this noise when cross building to the Android NDK:
util/header.c: In function 'perf_header__fprintf_info':
util/header.c:2710:45: warning: pointer targets in passing argument 1 of 'ctime' differ in signedness [-Wpointer-sign]
fprintf(fp, "# captured on : %s", ctime(&st.st_ctime));
^
In file included from util/../perf.h:5:0,
from util/evlist.h:11,
from util/header.c:22:
/opt/android-ndk-r15c/platforms/android-26/arch-arm/usr/include/time.h:81:14: note: expected 'const time_t *' but argument is of type 'long unsigned int *'
extern char* ctime(const time_t*) __LIBC_ABI_PUBLIC__;
^
perf tools: Add missing sigqueue() prototype for systems lacking it
There are systems such as the Android NDK API level 24 has the
sigqueue() function but doesn't provide a prototype, adding noise to the
build:
util/evlist.c: In function 'perf_evlist__prepare_workload':
util/evlist.c:1494:4: warning: implicit declaration of function 'sigqueue' [-Wimplicit-function-declaration]
if (sigqueue(getppid(), SIGUSR1, val))
^
util/evlist.c:1494:4: warning: nested extern declaration of 'sigqueue' [-Wnested-externs]
Define a LACKS_SIGQUEUE_PROTOTYPE define so that code needing that can
get a prototype.
Checked in the bionic git repo to be available since level 23:
tools lib subcmd: Don't add the kernel sources to the include path
At some point we decided not to directly include kernel sources files
when building tools/perf/, but when tools/lib/subcmd/ was forked from
tools/perf it somehow ended up adding it via these two lines in its
Makefile:
This fixes the build when building from the sources in environments such
as the Android NDK crossbuilding from a fedora:26 system:
subcmd-util.h:11:15: error: expected ',' or ';' before 'void'
static inline void report(const char *prefix, const char *err, va_list params)
^
In file included from /git/perf/include/uapi/linux/stddef.h:2:0,
from /git/perf/include/uapi/linux/posix_types.h:5,
from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h:36,
from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/unistd.h:33,
from run-command.c:2:
subcmd-util.h:18:17: error: '__no_instrument_function__' attribute applies only to functions
The /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h
file that includes linux/posix_types.h ends up getting the one in the kernel
sources causing the breakage. Fix it.
Test built tools/objtool/ too.
Reported-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 4b6ab94eabe4 ("perf subcmd: Create subcmd library") Link: https://lkml.kernel.org/n/tip-5lhaoecrj12t0bqwvpiu14sm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: Allow selecting use the use of the ordered_events code
I was trigger happy on this one, as using ordered_events as implemented
by Jiri for use with the --block code under discussion on lkml incurs
in delaying processing to form batches that then get ordered and then
printed.
With 'perf trace' we want to process the events as they go, without that
delay, and doing it that way works well for the common case which is to
trace a thread or a workload started by 'perf trace'.
So revert back to not using ordered_events but add an option to select
that mode so that users can experiment with their particular use case to
see if works better, i.e. if the added delay is not a problem and the
ordering helps.
tools lib traceevent: Fix processing of dereferenced args in bprintk events
In the case that a bprintk event has a dereferenced pointer that is
stored as a string, and there's more values to process (more args), the
arg was not updated to point to the next arg after processing the
dereferenced pointer, and it screwed up what was to be displayed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 37db96bb49629 ("tools lib traceevent: Handle new pointer processing of bprint strings") Link: http://lkml.kernel.org/r/20181210134522.3f71e2ca@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Petlan [Mon, 10 Dec 2018 16:00:04 +0000 (11:00 -0500)]
perf stat: Avoid segfaults caused by negated options
Some 'perf stat' options do not make sense to be negated (event,
cgroup), some do not have negated path implemented (metrics). Due to
that, it is better to disable the "no-" prefix for them, since
otherwise, the later opt-parsing segfaults.
Before:
$ perf stat --no-metrics -- ls
Segmentation fault (core dumped)
After:
$ perf stat --no-metrics -- ls
Error: option `no-metrics' isn't available
Usage: perf stat [<options>] [<command>]
Signed-off-by: Michael Petlan <mpetlan@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 1485912065.62416880.1544457604340.JavaMail.zimbra@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Petlan [Wed, 21 Nov 2018 21:39:18 +0000 (16:39 -0500)]
perf tests: Use shebangs in the shell scripts
Since the first line was used as a test identification, it needs to be
skipped by shell_test__description() function now.
Further notes from Hendrik:
It might be worth to note that adding the shebang is necessary to spot
them as scripts.
Using /bin/sh looks fine to. Just briefly checked whether the scripts
contains some bash-specifics, which is not the case.
Signed-off-by: Michael Petlan <mpetlan@redhat.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 2127419430.57657104.1542836358464.JavaMail.zimbra@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 27 Nov 2018 08:46:34 +0000 (10:46 +0200)]
perf auxtrace: Alter addr_filter__entire_dso() to work if there are no symbols
addr_filter__entire_dso() uses the first and last symbols from a dso,
and so does not work when there are no symbols. Alter it to filter the
whole file instead.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 1b36c03e3569 ("perf record: Add support for using symbols in address filters") Link: http://lkml.kernel.org/r/20181127084634.12469-1-adrian.hunter@intel.com
[ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Tue, 18 Dec 2018 13:39:00 +0000 (14:39 +0100)]
Merge tag 'perf-core-for-mingo-4.21-20181217' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Introduce 'perf record --aio' to use asynchronous IO trace writing, disabled
by default (Alexey Budankov)
- Add fallback routines to be used in places where we don't have the CPU mode
(kernel/userspace/hypervisor) and thus must first fallback lookups looking
at all map trees when trying to resolve symbols (Adrian Hunter)
- Fix error with config term "pt=0", where we should just force "pt=1" and
warn the user about the former being nonsensical (Adrian Hunter)
- Fix 'perf test' entry where we expect 'sleep' to come in a PERF_RECORD_COMM
but instead we get 'coreutils' when sleep is provided by some versions of
the 'coreutils' package (Adrian Hunter)
- Introduce 'perf top --kallsyms file' to match 'perf report --kallsyms', useful
when dealing with BPF, where symbol resolution happens via kallsyms, not via
the default vmlinux ELF symtabs (Arnaldo Carvalho de Melo)
- Support 'srccode' output field in 'perf script' (Andi Kleen)
- Introduce basic 'perf annotation' support for the ARC architecture (Eugeniy Paltsev)
- Compute and display average IPC and IPC coverage per symbol in 'perf annotate' and
'perf report' (Jin Yao)
- Make 'perf top' use ordered_events and process histograms in a separate thread (Jiri Olsa)
- Make 'perf trace' use ordered_events (Jiri Olsa)
- Add support for ETMv3 and PTMv1.1 decoding in cs-etm (Mathieu Poirier)
- Support for ARM A32/T32 instruction sets in CoreSight trace (cs-etm) (Robert Walker)
- strncpy() fixes triggered by new warnings on gcc 8.2.0 (Arnaldo Carvalho de Melo)
- Handle tracefs syscall tracepoint older 'nr' field in 'perf trace', that got
renamed to '__syscall_nr' to work in older kernels (Arnaldo Carvalho de Melo)
- Give better hint about devel package for libssl (Arnaldo Carvalho de Melo)
- Fix the 'perf trace' build in architectures lacking explicit mmap.h file (Arnaldo Carvalho de Melo)
- Remove extra rb_tree traversal indirection from map__find() (Eric Saint-Etienne)
- Disable breakpoint tests for 32-bit ARM (Florian Fainelli)
- Fix typos all over the place, mostly in comments, but also in some debug
messages and JSON files (Ingo Molnar)
- Allow specifying proc-map-timeout in config file (Mark Drayton)
Add OE_FLUSH__TIME flush type, to be able to flush only certain amount
of the queue based on the provided timestamp. It will be used in the
following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dmitry Levin <ldv@altlinux.org> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Luis Cláudio Gonçalves <lclaudio@uudg.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181205160509.1168-7-jolsa@kernel.org
[ Fix the build on older systems such as centos 5 and 6 where 'time' shadows a global declaration ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sihyeon Jang [Sat, 1 Dec 2018 15:46:03 +0000 (00:46 +0900)]
perf config: Modify size factor of snprintf
According to definition of snprintf, it gets size factor including
null('\0') byte. So '-1' is not neccessary. Also it will be helpful
unfied style with other cases. (eg. builtin-script.c)
Alexey Budankov [Wed, 5 Dec 2018 17:19:41 +0000 (20:19 +0300)]
perf record: Fix memory leak on AIO objects deallocation
Sending a part which was missed between v12 and v13 of the patch set
introducing AIO trace streaming for perf record mode.
The part is essential to avoid memory leakage during deallocation of AIO
related trace data buffers.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/e5d3154e-1583-83bb-9527-28ddbc6dbf9d@linux.intel.com
[ No need to test for NULL before calling zfree() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf parse-events: Fix unchecked usage of strncpy()
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/parse-events.c: In function 'print_symbol_events':
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'print_symbol_events.constprop',
inlined from 'print_events' at util/parse-events.c:2508:2:
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'print_symbol_events.constprop',
inlined from 'print_events' at util/parse-events.c:2511:2:
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 947b4ad1d198 ("perf list: Fix max event string size") Link: https://lkml.kernel.org/n/tip-b663e33bm6x8hrkie4uxh7u2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
In this case the 'target' buffer is coming from a list of build-ids that
are expected to have a len of at most (SBUILD_ID_SIZE - 1) chars, so
probably we're safe, but since we're using strncpy() here, use strlcpy()
instead to provide the intended safety checking without the using the
problematic strncpy() function.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/probe-file.c: In function 'probe_cache__open.isra.5':
util/probe-file.c:427:3: error: 'strncpy' specified bound 41 equals destination size [-Werror=stringop-truncation]
strncpy(sbuildid, target, SBUILD_ID_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 1f3736c9c833 ("perf probe: Show all cached probes") Link: https://lkml.kernel.org/n/tip-l7n8ggc9kl38qtdlouke5yp5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf ui helpline: Use strlcpy() as a shorter form of strncpy() + explicit set nul
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
In this case we are actually setting the null byte at the right place,
but since we pass the buffer size as the limit to strncpy() and not
it minus one, gcc ends up warning us about that, see below. So, lets
just switch to the shorter form provided by strlcpy().
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
ui/tui/helpline.c: In function 'tui_helpline__push':
ui/tui/helpline.c:27:2: error: 'strncpy' specified bound 512 equals destination size [-Werror=stringop-truncation]
strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0';
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: e6e904687949 ("perf ui: Introduce struct ui_helpline") Link: https://lkml.kernel.org/n/tip-d1wz0hjjsh19xbalw69qpytj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
In this specific case this would only happen if fgets() was buggy, as
its man page states that it should read one less byte than the size of
the destination buffer, so that it can put the nul byte at the end of
it, so it would never copy 255 non-nul chars, as fgets reads into the
orig buffer at most 254 non-nul chars and terminates it. But lets just
switch to strlcpy to keep the original intent and silence the gcc 8.2
warning.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
In function 'cpu_model',
inlined from 'svg_cpu_box' at util/svghelper.c:378:2:
util/svghelper.c:337:5: error: 'strncpy' output may be truncated copying 255 bytes from a string of length 255 [-Werror=stringop-truncation]
strncpy(cpu_m, &buf[13], 255);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Fixes: f48d55ce7871 ("perf: Add a SVG helper library file") Link: https://lkml.kernel.org/n/tip-xzkoo0gyr56gej39ltivuh9g@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we make sure the destination buffer has at least strlen(orig) + 1,
no need to do a strncpy(dest, orig, strlen(orig)), just use strcpy(dest,
orig).
This silences this gcc 8.2 warning on Alpine Linux:
In function 'add_man_viewer',
inlined from 'perf_help_config' at builtin-help.c:284:3:
builtin-help.c:192:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy((*p)->name, name, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
builtin-help.c: In function 'perf_help_config':
builtin-help.c:187:15: note: length computed here
size_t len = strlen(name);
^~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 078006012401 ("perf_counter tools: add in basic glue from Git") Link: https://lkml.kernel.org/n/tip-2f69l7drca427ob4km8i7kvo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/header.c: In function 'perf_event__synthesize_event_update_name':
util/header.c:3625:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(ev->data, evsel->name, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/header.c:3618:15: note: length computed here
size_t len = strlen(evsel->name);
^~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a6e5281780d1 ("perf tools: Add event_update event unit type") Link: https://lkml.kernel.org/n/tip-wycz66iy8dl2z3yifgqf894p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/header.c: In function 'perf_event__synthesize_event_update_unit':
util/header.c:3586:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(ev->data, evsel->unit, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/header.c:3579:16: note: length computed here
size_t size = strlen(evsel->unit);
^~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a6e5281780d1 ("perf tools: Add event_update event unit type") Link: https://lkml.kernel.org/n/tip-fiikh5nay70bv4zskw2aa858@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
In function 'decompress_kmodule',
inlined from 'dso__decompress_kmodule_fd' at util/dso.c:305:9:
util/dso.c:298:3: error: 'strncpy' destination unchanged after copying no bytes [-Werror=stringop-truncation]
strncpy(pathname, tmpbuf, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC /tmp/build/perf/util/values.o
CC /tmp/build/perf/util/debug.o
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: c9a8a6131fb6 ("perf tools: Move the temp file processing into decompress_kmodule") Link: https://lkml.kernel.org/n/tip-tl2hdxj64tt4k8btbi6a0ugw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mathieu Poirier [Tue, 4 Dec 2018 20:39:04 +0000 (13:39 -0700)]
perf cs-etm: Add support for PTMv1.1 decoding
This patch is re-using the mechanic set forth by ETMv3 to add support
for PTM decoding. Configuration for both encoding protocol is similar
but the generated stream itself is very different, hence requiring
special handling.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543955944-10042-4-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mathieu Poirier [Tue, 4 Dec 2018 20:39:03 +0000 (13:39 -0700)]
perf cs-etm: Add support for ETMv3 trace decoding
Add support for the creation of packet printer and decoder for the ETMv3
trace architecture. That way traces generated by tracers adhering to
that trace protocol can be handled properly by the perf infrastructure.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543955944-10042-3-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mathieu Poirier [Tue, 4 Dec 2018 20:39:02 +0000 (13:39 -0700)]
perf cs-etm: Add configuration for ETMv3 trace protocol
This patch deals with the proper initialisation of configuration
parameters for the ETMv3 trace protocol in order to properly handle
packets generated by tracers following this specification.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543955944-10042-2-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 13 Nov 2018 10:15:34 +0000 (11:15 +0100)]
perf top: Move perf_top__reset_sample_counters() to after counts display
Move the perf_top__reset_sample_counters() call to right after we
display the counters so we can see the updated numbers for longer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-o72pyiwt05f3p2juprwmz2jo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 19 Nov 2018 10:12:01 +0000 (11:12 +0100)]
perf top: Display slow reader warning when droping samples
Currently we display the "Too slow to read ring buffer.." helpline only
in the slow reader thread. This patch triggers it also when the
processing thread drops samples, because it has the same reason, which
is too many data on input.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-bnev2mloavyurmgchcr3o24o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# perf top
Samples: 0 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 0 lost: 0/0 drop: 0/0
The format is: <current period drop>/<total drop>
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-2lj87zz8tq9ye1ntax3ulw0n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 11 Nov 2018 18:52:06 +0000 (19:52 +0100)]
perf top: Drop samples which are behind the refresh rate
Drop samples from processing thread if they get behind the latest event
read from the kernel maps. If it gets behind more than the refresh rate
(-d option), drop the sample.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-x533ra5c1pgofvbtsizzuydd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 7 Nov 2018 19:11:19 +0000 (20:11 +0100)]
perf top: Set the 'session_done' volatile variable when exiting
So we can get out of hist processing ASAP on user request.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-r8aufbgbixr2f85s3wcoaw9v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 5 Nov 2018 20:23:40 +0000 (21:23 +0100)]
perf top: Use cond variable instead of a lock
Use conditional variable logic to synchronize between the reading and
processing threads. Currently it's done by having mutex around rotation
code.
Using a POSIX cond variable to sync both threads after queues rotation:
Process thread:
- Detects data
- Switches queues
- Sets rotate variable
- Waits in pthread_cond_wait()
Read thread:
- Detects rotate is set
- Kicks the process thread with a pthread_cond_signal()
After this rotation is safely completed and both threads can continue
with the new queue.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-3rdeg23rv3brvy1pwt3igvyw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 5 Nov 2018 12:24:55 +0000 (13:24 +0100)]
perf top: Add processing thread
Add a new thread that takes care of the hist creating to alleviate the
main reader thread so it can keep perf mmaps served in time so that we
reduce the possibility of losing events.
The 'perf top' command now spawns 2 extra threads, the data processing
is the following:
1) The main thread reads the data from mmaps and queues them to
ordered events object;
2) The processing threads takes the data from the ordered events
object and create initial histogram;
3) The GUI thread periodically sorts the initial histogram and
presents it.
Passing the data between threads 1 and 2 is done by having 2 ordered
events queues. One is always being stored by thread 1 while the other is
flushed out in thread 2.
Passing the data between threads 2 and 3 stays the same as was initially
for threads 1 and 3.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-hhf4hllgkmle9wl1aly1jli0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 5 Nov 2018 20:34:47 +0000 (21:34 +0100)]
perf top: Move lost events warning to helpline
We can't display the UI box saying that we are slow in the reader
thread. That will make 'perf top' even slower and the user even more
angry ;-)
Move the UI box message from the reader thread to the UI thread and
change it to a helpline, so there's no need to 'press any key'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-x4k0iuw7tt6mywsaguq6jfwu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>