Johannes Sixt [Thu, 11 Sep 2008 08:14:44 +0000 (10:14 +0200)]
Use compatibility regex library also on AIX
This augments 3632cfc24 (Use compatibility regex library on Darwin,
2008-09-07), which already carries a "Tested-by" statement for AIX,
but that test was actually done with this patch included.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Tested-by: Mike Ralphson <mike@abacus.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
separate build targets for man and html documentation
This introduces new build targets "man" and "html" which allow building
the documentation in the respective formats separately. This helps
people with a partial documentation build chain: html pages can be built
without xmlto.
This is documented in INSTALL now, together with corrections: Before,
instructions in INSTALL would build man+html but install man only. Now
the instructions build and install both, and new and pre-existing
targets are explained.
Note that build targets "doc" and "man" correspond to install targets
"install-doc install-html" and "install-doc" respectively. This
inconsistency is not changed, in order to keep everyone's build scripts
from breaking.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm> Signed-off-by: Junio C Hamano <gitster@pobox.com>
allow installation of man and html doc from the man and html branches
This patch introduces a make target "quick-install-html" which installs
the html documentation from the branch origin/html, without the need for
asciidoc/xmlto. This is analogous to the existing "quick-install-doc"
target for the man pages.
We advertise these targets in the INSTALL file now.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 10 Sep 2008 19:22:35 +0000 (12:22 -0700)]
Fix git-diff-tree --stdin
140b378 (Teach git diff-tree --stdin to diff trees, 2008-08-10) broke the
more important case of reading series of commits to filter ones that touch
given pathspecs.
Noticed by Mark Levedahl, running "gitk ec3a4ba" and trying to focus on
commits that touch "t/" directory.
Junio C Hamano [Wed, 10 Sep 2008 20:56:20 +0000 (13:56 -0700)]
Merge branch 'maint'
* maint:
Update draft release notes for 1.6.0.2
Use compatibility regex library for OSX/Darwin
git-svn: Fixes my() parameter list syntax error in pre-5.8 Perl
Git.pm: Use File::Temp->tempfile instead of ->new
t7501: always use test_cmp instead of diff
The standard libc regex library on OSX does not support alternation
in POSIX Basic Regular Expression mode. This breaks the diff.funcname
functionality on OSX.
To fix this, we use the GNU regex library which is already present in
the compat/ diretory for the MinGW port. However, simply adding compat/
to the COMPAT_CFLAGS variable causes a conflict between the system
fnmatch.h and the one present in compat/. To remedy this, move the
regex and fnmatch functionality to their own subdirectories in compat/
so they can be included seperately.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Tested-by: Mike Ralphson <mike@abacus.co.uk> (AIX) Tested-by: Johannes Sixt <johannes.sixt@telecom.at> (MinGW) Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marcus Griep [Mon, 8 Sep 2008 16:53:01 +0000 (12:53 -0400)]
Git.pm: Use File::Temp->tempfile instead of ->new
Perl 5.8.0 ships with File::Temp 0.13, which does not have the new()
interface introduced in 0.14, as pointed out by Tom G. Christensen.
This modifies Git.pm to use the more established tempfile() interface
and updates 'git svn' to match.
Signed-off-by: Marcus Griep <marcus@griep.us> Acked-by: Eric Wong <normalperson@yhbt.net> Tested-by: Tom G. Christensen <tgc@statsbiblioteket.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 10 Sep 2008 09:12:47 +0000 (02:12 -0700)]
Merge branch 'np/maint-safer-pack' into maint
* np/maint-safer-pack:
fixup_pack_header_footer(): use nicely aligned buffer sizes
index-pack: use fixup_pack_header_footer()'s validation mode
pack-objects: use fixup_pack_header_footer()'s validation mode
improve reliability of fixup_pack_header_footer()
pack-objects: improve returned information from write_one()
Use xmalloc() and friends to catch allocation failures
Some places use the standard malloc/strdup without checking if the
allocation was successful; they should use xmalloc/xstrdup that
check the memory allocation result.
Signed-off-by: Dotan Barak <dotanba@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6023-merge-file: Work around non-portable sed usage
OS X sed doesn't understand '\n' on the right side of a substitution.
Use a valid substitution character instead and use 'tr' to convert
those to a newline.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The non-verbose output was not changed in fdb2a2a (compat: introduce
on_disk_bytes(), 2008-08-18) which caused git-count-objects to claim 512
times too much space used for loose objects.
Johannes Sixt [Mon, 8 Sep 2008 10:46:55 +0000 (12:46 +0200)]
Windows: git-shell can be compiled again
The reason that git-shell was excluded from the Windows build was that
our compatibility layer needed stuff that was removed when we tried to
link less of the git library into git-shell. Since 4cfc24a (shell: do
not play duplicated definition games to shrink the executable,
2008-08-19) the complete library is linked again, so we can build
git-shell on Windows as well. (This fixes 'make install', which depends
on that git-shell is always built.)
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t91XX-svn: start removing use of "git-" from these tests
Subversion tests use too many "git-foo" form, so I am converting them
in two steps.
This first step replaces literal strings "remotes/git-svn" and "git-svn-id"
by introducing $remotes_git_svn and $git_svn_id constants defined as shell
variables. This will reduce the number of false hits from "git grep".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 21 Feb 2008 23:10:37 +0000 (15:10 -0800)]
Don't verify host name in SSL certs when GIT_SSL_NO_VERIFY is set
Originally from Mike Hommey; earlier we were disabling SSL_VERIFYPEER
but SSL_VERIFYHOST was in effect even when the user asked not to with
the environment variable.
Eric Wong [Sun, 7 Sep 2008 03:18:18 +0000 (20:18 -0700)]
git-svn: fix handling of even funkier branch names
Apparently do_switch() tolerates the lack of escaping in less
funky branch names. For the really strange and scary ones, we
need to escape them properly. It strangely maintains compatible
with the existing handling of branch names with spaces and
exclamation marks.
Reported-by: m.skoric@web.de ($gmane/94677) Signed-off-by: Eric Wong <normalperson@yhbt.net>
Junio C Hamano [Sun, 7 Sep 2008 02:39:13 +0000 (19:39 -0700)]
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
git-svn: set auto_props when renaming files
t9124: clean up chdir usage
git-svn: fix 'info' tests for unknown items
git-svn: match SVN 1.5 behaviour of info' on unknown item
git svn info: always quote URLs in 'info' output
git svn info: make info relative to the current directory
git svn info: tests: fix ptouch argument order in setup
git svn info: tests: use test_cmp instead of git-diff
git svn info: tests: do not use set -e
git svn info: tests: let 'init' test run with SVN 1.5
git svn: catch lack of upstream info for dcommit earlier
git-svn: check error code of send_txstream
git-svn: Send deltas during commits
git-svn: Introduce SVN::Git::Editor::_chg_file_get_blob
git-svn: extract base blob in generate_diff
Paul Talacko [Sun, 7 Sep 2008 01:50:38 +0000 (18:50 -0700)]
git-svn: set auto_props when renaming files
Patch-by: Paul Talacko <gnuruandstuff@yahoo.co.uk>:
<http://article.gmane.org/gmane.comp.version-control.git/95006>
> Hello,
>
> There's an issue in git-svn as autoprops are not applied to
> renamed files, only to added files.
>
> This patch fixes the bug.
[ew: added test case] Signed-off-by: Eric Wong <normalperson@yhbt.net>
Junio C Hamano [Sun, 7 Sep 2008 01:06:39 +0000 (18:06 -0700)]
Merge updated git-gui and gitk that call each other
Merge git://repo.or.cz/git-gui and git://git.kernel.org/pub/scm/gitk/gitk
* git://repo.or.cz/git-gui:
git-gui: Show special diffs for complex conflict cases.
git-gui: Make F5 reselect a diff, if an untracked file is selected.
git-gui: Reimplement and enhance auto-selection of diffs.
git-gui: Support conflict states _U & UT.
git-gui: Support more merge tools.
git-gui: Don't allow staging files with conflicts.
git-gui: Support calling merge tools.
git-gui: Support resolving conflicts via the diff context menu.
git-gui: Mark forgotten strings for translation.
git-gui: Allow specifying an initial line for git gui blame.
git-gui: Better positioning in Blame Parent Commit
git-gui: Support passing blame to a parent commit.
git-gui: Support starting gitk from Gui Blame
git-gui: Teach git gui about file type changes
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Add menu item for calling git gui blame
gitk: Add option to specify the default commit on command line
Junio C Hamano [Sat, 6 Sep 2008 23:47:32 +0000 (16:47 -0700)]
Merge branch 'maint'
* maint:
Update draft release notes for 1.6.0.2
stash: refresh the index before deciding if the work tree is dirty
Mention the fact that 'git annotate' is only for backward compatibility.
"blame -c" should be compatible with "annotate"
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
Junio C Hamano [Sat, 6 Sep 2008 23:03:22 +0000 (16:03 -0700)]
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
Thomas Rast [Fri, 29 Aug 2008 13:42:49 +0000 (15:42 +0200)]
git-svn: fix 'info' tests for unknown items
The previous tests all expected the results from SVN and Git to be
identical, and expected both to return success. This cannot be
guaranteed: SVN changed the message style between 1.4 and 1.5, and
in 1.5, sets a failure exit code.
Change the tests to verify that 'git svn info <item>' sets a failure
exit code, and that its output contains the file name. This should
hopefully catch all other errors.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Thomas Rast [Fri, 29 Aug 2008 13:42:48 +0000 (15:42 +0200)]
git-svn: match SVN 1.5 behaviour of info' on unknown item
Previously 'git svn info unknown-file' only announced its failure (in
the SVN 1.4 style, "not a versioned resource"), and exited
successfully.
It is desirable to actually exit with failure, so change the code to
exit(1) under this condition. Since that is already halfway SVN 1.5
compatibility, also change the error output to match 1.5.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Thomas Rast [Tue, 26 Aug 2008 19:32:37 +0000 (21:32 +0200)]
git svn info: always quote URLs in 'info' output
Changes 'git svn info' to always URL-escape the 'URL' and 'Repository'
fields and --url output, like SVN (at least 1.5) does.
Note that reusing the escape_url() further down in Git::SVN::Ra is not
possible because it only triggers for http(s) URLs. I did not know
whether extending it to all schemes would break SVN access anywhere,
so I made a new one that quotes in all schemes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Thomas Rast [Tue, 26 Aug 2008 19:32:36 +0000 (21:32 +0200)]
git svn info: make info relative to the current directory
Previously 'git svn info <path>' would always treat the <path> as
relative to the working directory root, with a default of ".". This
does not match the behaviour of 'svn info'. Prepend $(git rev-parse
--show-prefix) to the path used inside cmd_info to make it relative to
the current working directory.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Thomas Rast [Tue, 26 Aug 2008 19:32:35 +0000 (21:32 +0200)]
git svn info: tests: fix ptouch argument order in setup
The arguments must be <gitwc-path> <svnwc-path>, otherwise it fails to
update the timestamps (without setting a failure exit code) and
results in bad test output later on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Thomas Rast [Tue, 26 Aug 2008 19:32:34 +0000 (21:32 +0200)]
git svn info: tests: use test_cmp instead of git-diff
git-diff does not appear to return the correct exit values, and gives
a false success for more than half (!) of the tests due to the space
in "trash directory" which git-svn fails to encode.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Thomas Rast [Tue, 26 Aug 2008 19:32:33 +0000 (21:32 +0200)]
git svn info: tests: do not use set -e
Exiting in the middle of a test confuses the test suite, which will
just say "FATAL: Unexpected exit with code 1" in response to a failed
test, instead of actually diagnosing failure and continuing with the
next test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Thomas Rast [Sun, 31 Aug 2008 13:50:59 +0000 (15:50 +0200)]
git svn: catch lack of upstream info for dcommit earlier
Since 711521e 'git svn dcommit' attempts to use the upstream
information to determine the SVN URL, before it verifies that it even
found an upstream. Move up the corresponding check.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Eric Wong <normalperson@yhbt.net>
Eric Wong [Mon, 1 Sep 2008 02:45:07 +0000 (19:45 -0700)]
git-svn: check error code of send_txstream
Not checking the error code of a function used to transform and
send data makes me nervous. It currently returns "undef" on
success; so die if we get any result other than "undef" because
it's likely something went wrong somewhere. I really wish this
function returned an MD5 like send_stream (or better yet, SHA1)
for verification.
Junio C Hamano [Fri, 5 Sep 2008 07:29:51 +0000 (00:29 -0700)]
Mention the fact that 'git annotate' is only for backward compatibility.
When somebody is reading git-blame.txt (or git-annotate.txt) for the first
time, the message we would like to send is:
(1) Here is why you would want to use this command, what it can do
(perhaps more than what you would have expected from "$scm blame"),
and how you tell it to do what it does.
This is obvious.
(2) You might have heard of the command with the other name. There is no
difference between the two, except they differ in their default
output formats.
This is essential to answer: "git has both? how are they different?"
(3) We tend to encourage blame over annotate for new scripts and new
people, but there is no reason to choose one over the other.
This is not as important as (2), but would be useful to avoid
repeated questions about "when will we start deprecating this?"
As long as we describe (2) on git-annotate page clearly enough, people who
read git-blame page first and get curious can refer to git-annotate page.
While at it, subtly hint (3) without being overly explicit.
Junio C Hamano [Fri, 5 Sep 2008 07:57:35 +0000 (00:57 -0700)]
"blame -c" should be compatible with "annotate"
There is no reason to have a separate variable cmd_is_annotate;
OUTPUT_ANNOTATE_COMPAT option is supposed to produce the compatibility
output, and we should produce the same output even when the command was
not invoked as "annotate" but as "blame -c".
Junio C Hamano [Fri, 5 Sep 2008 05:30:44 +0000 (22:30 -0700)]
Merge branch 'jc/maint-log-grep'
* jc/maint-log-grep:
log --author/--committer: really match only with name part
diff --cumulative is a sub-option of --dirstat
bash completion: Hide more plumbing commands
Junio C Hamano [Fri, 5 Sep 2008 05:15:02 +0000 (22:15 -0700)]
log --author/--committer: really match only with name part
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
git-gui: Fix diff parsing for lines starting with "--" or "++"
Languages like Lua and SQL use "--" to mark a line as commented out.
If this appears at column 0 and is part of the pre-image we may see
"--- foo" in the diff, indicating that the line whose content is
"-- foo" has been removed from the new version.
git-gui was incorrectly parsing "--- foo" as the old file name
in the file header, causing it to generate a bad patch file when
the user tried to stage or unstage a hunk or the selected line.
We need to keep track of where we are in the parsing so that we do
not misread a deletion or addition record as part of the header.
Reported-by: Alexander Gladysh <agladysh@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Show special diffs for complex conflict cases.
Add special handling for displaying diffs of modified/deleted,
and symlink/mode conflicts. Currently the display is completely
unusable for deciding how to resolve the conflict.
New display modes:
1) Deleted/Modified conflict: e.g.
LOCAL: deleted
REMOTE:
[diff :1:$path :3:$path]
git-gui: Make F5 reselect a diff, if an untracked file is selected.
If an untracked file is selected, F5 and other manual rescan synonyms
would try to select a tracked file instead. Also, clicking on an icon
in the unstaged changes list skips over untracked files, unless the
file clicked is untracked itself.
The objective is to make it easier to ignore untracked files showing
up in the Unstaged Changes list, and ensure that no modifications
to tracked objects are left unstaged.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Reimplement and enhance auto-selection of diffs.
Generalize the next_diff system, and implement auto-reselection
for merge tool resolution and reshow_diff. Also add auto-selection
of diffs after rescan, if no diff is already selected.
New auto-select rules:
- Rescan auto-selects the first conflicting file, or if none
a modified tracked file, if nothing was selected previously.
- Resolving a conflict auto-selects the nearest conflicting
file, or nothing if everything is resolved.
- Staging the last remaining hunk auto-selects the nearest
modified staged file.
- Staging a file through its icon auto-selects the nearest file.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Don't allow staging files with conflicts.
Prevent staging files with conflict markers by clicking
on the icon in the 'Unstaged Changes' list. Instead, pretend
that the user clicked the name, and show the diff.
Originally it made some sense to allow staging conflicting
files, because git-gui did not provide any tools to resolve
them from within the GUI. But now that we have added mergetool
capabilities, it is more likely to cause accidental and
non-undoable errors.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Adds an item to the diff context menu in conflict mode,
which invokes a merge tool for the selected file. Tool
command-line handling code was ported from git-mergetool.
Automatic default tool selection and custom merge tools
are not supported. If merge.tool is not set, git-gui
defaults to meld.
This implementation uses a checkout-index hack in order
to retrieve all stages with autocrlf and filters properly
applied. It requires temporarily moving the original
conflict file out of the way.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Support resolving conflicts via the diff context menu.
If the file has merge conflicts, show a special version of the
diff context menu, which includes conflict resolution commands
instead of Stage Hunk/Line. This patch only supports resolving
by discarding all sides except one.
Discarding is the only way to resolve conflicts involving symlinks
and/or deletion, excluding manual editing.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Petr Baudis [Tue, 26 Aug 2008 17:11:44 +0000 (19:11 +0200)]
bash completion: Hide more plumbing commands
git <tab><tab> still shows way too many commands, some of them
are clearly plumbing. This patch hides the plumbing commands
liberally (that is, in special cases, users still might want to
call one of the hidden commands, a *normal* workflow should never
involve these, though - and if it does, we have a UI problem anyway).
Signed-off-by: Petr Baudis <pasky@suse.cz> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 3 Sep 2008 23:08:23 +0000 (16:08 -0700)]
Merge branch 'maint'
* maint:
Start 1.6.0.2 maintenance cycle
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
Fix passwd(5) ref and reflect that commit doens't use commit-tree
improve handling of sideband message display
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
checkout: fix message when leaving detached HEAD
clone: fix creation of explicitly named target directory
'git foo' program identifies itself without dash in die() messages
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
Start conforming code to "git subcmd" style
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
Junio C Hamano [Wed, 3 Sep 2008 21:51:56 +0000 (14:51 -0700)]
Merge branch 'ho/dashless' into maint
* ho/dashless:
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
'git foo' program identifies itself without dash in die() messages
Start conforming code to "git subcmd" style
Nicolas Pitre [Wed, 3 Sep 2008 19:13:42 +0000 (15:13 -0400)]
improve handling of sideband message display
Currently the code looks for line break characters in order to prepend
"remote: " to every line received as many lines can be sent in a single
chunk. However the opposite might happen too, i.e. a single message
line split amongst multiple chunks. This patch adds support for the
later case to avoid displays like:
Jeff King [Wed, 3 Sep 2008 18:07:26 +0000 (14:07 -0400)]
checkout: fix message when leaving detached HEAD
The shell version of git checkout would print:
Previous HEAD position was 1234abcd... commit subject line
when leaving a detached HEAD for another commit. Ths C
version attempted to implement this, but got the condition
wrong such that the behavior never triggered.
This patch simplifies the conditions for showing the message
to the ones used by the shell version: any time we are
leaving a detached HEAD and the new and old commits are not
the same (this suppresses it for the "git checkout -b new"
case recommended when you enter the detached state).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: fix creation of explicitly named target directory
'git clone <repo> path/' (note the trailing slash) fails, because the
entire path is interpreted as leading directories. So when mkdir tries to
create the actual path, it already exists.
This makes sure trailing slashes are removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 3 Sep 2008 00:47:13 +0000 (17:47 -0700)]
Merge branch 'tr/filter-branch'
* tr/filter-branch:
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Documentation: rev-list-options: move --simplify-merges documentation
filter-branch: use --simplify-merges
filter-branch: fix ref rewriting with --subdirectory-filter
filter-branch: Extend test to show rewriting bug
Topo-sort before --simplify-merges
revision traversal: show full history with merge simplification
revision.c: whitespace fix
Junio C Hamano [Wed, 3 Sep 2008 00:46:48 +0000 (17:46 -0700)]
Merge branch 'np/maint-safer-pack'
* np/maint-safer-pack:
fixup_pack_header_footer(): use nicely aligned buffer sizes
index-pack: use fixup_pack_header_footer()'s validation mode
pack-objects: use fixup_pack_header_footer()'s validation mode
improve reliability of fixup_pack_header_footer()
pack-objects: improve returned information from write_one()
projects / git.git / log