media: platform: vivid-cec: use 64-bit arithmetic instead of 32-bit
Add suffix ULL to constant 10 in order to give the compiler complete
information about the proper arithmetic to use. Notice that this
constant is used in a context that expects an expression of type
u64 (64 bits, unsigned).
The expression len * 10 * CEC_TIM_DATA_BIT_TOTAL is currently being
evaluated using 32-bit arithmetic.
Also, remove unnecessary parentheses and add a code comment to make it
clear what is the reason of the code change.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: platform: sh_veu: use 64-bit arithmetic instead of 32-bit
Cast left and top to dma_addr_t in order to give the compiler complete
information about the proper arithmetic to use. Notice that these
variables are being used in contexts that expect expressions of
type dma_addr_t (64 bit, unsigned).
Such expressions are currently being evaluated using 32-bit arithmetic.
Also, move the expression (((dma_addr_t)left * veu->vfmt_out.fmt->depth) >> 3)
at the end in order to avoid a line wrapping checkpatch.pl warning.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: rockchip/rga: use 64-bit arithmetic instead of 32-bit
Cast p to dma_addr_t in order to avoid a potential integer overflow.
This variable is being used in a context that expects an expression
of type dma_addr_t (u64).
The expression p << PAGE_SHIFT is currently being evaluated
using 32-bit arithmetic.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: pci: cx88-input: use 64-bit arithmetic instead of 32-bit
Add suffix LL to constant 1000000 in order to give the compiler
complete information about the proper arithmetic to use. Notice
that this constant is used in a context that expects an expression
of type ktime_t (64 bits, signed).
The expression ir->polling * 1000000 is currently being evaluated
using 32-bit arithmetic.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: i2c: max2175: use 64-bit arithmetic instead of 32-bit
Add suffix LL to constant 2 in order to give the compiler complete
information about the proper arithmetic to use. Notice that this
constant is used in a context that expects an expression of type
s64 (64 bits, signed).
The expression 2 * (clock_rate - abs_nco_freq) is currently being
evaluated using 32-bit arithmetic.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: dvb-frontends: ves1820: use 64-bit arithmetic instead of 32-bit
Add suffix ULL to constant 10 in order to give the compiler complete
information about the proper arithmetic to use. Notice that this
constant is used in a context that expects an expression of type
u64 (64 bits, unsigned).
The expression fpxin = state->config->xin * 10 is currently being
evaluated using 32-bit arithmetic.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: rtl2832: use 64-bit arithmetic instead of 32-bit in rtl2832_set_frontend
Add suffix ULL to constant 7 in order to give the compiler complete
information about the proper arithmetic to use. Notice that this
constant is used in a context that expects an expression of type
u64 (64 bits, unsigned).
The expression dev->pdata->clk * 7 is currently being evaluated
using 32-bit arithmetic.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fixes vb2_vmalloc_get_userptr() to ioremap correct area.
Since the current code does ioremap the page address, if the offset > 0,
it does not do ioremap the last page and results in kernel panic.
This fixes to pass the size + offset to ioremap so that ioremap
can map correct area. Also, this uses __pfn_to_phys() to get the physical
address of given PFN.
media: v4l: vidioc-prepare-buf.rst: fix link to VIDIOC_QBUF
The description for VIDIOC_PREPARE_BUF results in the following
sentence: "...before actually enqueuing it, using the ioctl VIDIOC_QBUF,
VIDIOC_DQBUF ioctl...".
The intent is to only refer to VIDIOC_QBUF though, so fix this.
Sakari Ailus [Fri, 2 Feb 2018 10:08:59 +0000 (05:08 -0500)]
media: vb2: core: Finish buffers at the end of the stream
If buffers were prepared or queued and the buffers were released without
starting the queue, the finish mem op (corresponding to the prepare mem
op) was never called to the buffers.
Before commit a136f59c0a1f there was no need to do this as in such a case
the prepare mem op had not been called yet. Address the problem by
explicitly calling finish mem op when the queue is stopped if the buffer
is in either prepared or queued state.
Fixes: a136f59c0a1f ("[media] vb2: Move buffer cache synchronisation to prepare from queue") Cc: stable@vger.kernel.org # for v4.13 and up Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hans Verkuil [Thu, 1 Feb 2018 07:36:33 +0000 (02:36 -0500)]
media: vivid: fix incorrect capabilities for radio
The vivid driver has two custom controls that change the behavior of RDS.
Depending on the control setting the V4L2_CAP_READWRITE capability is toggled.
However, after an earlier commit the capability was no longer set correctly.
This is now fixed.
Fixes: 9765a32cd8 ("vivid: set device_caps in video_device") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Colin Ian King [Wed, 31 Jan 2018 17:33:09 +0000 (12:33 -0500)]
media: cx25821: prevent out-of-bounds read on array card
Currently an out of range dev->nr is detected by just reporting the
issue and later on an out-of-bounds read on array card occurs because
of this. Fix this by checking the upper range of dev->nr with the size
of array card (removes the hard coded size), move this check earlier
and also exit with the error -ENOSYS to avoid the later out-of-bounds
array read.
Detected by CoverityScan, CID#711191 ("Out-of-bounds-read")
Fixes: commit 02b20b0b4cde ("V4L/DVB (12730): Add conexant cx25821 driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: %ld -> %zd] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Niklas Söderlund [Thu, 25 Jan 2018 13:08:52 +0000 (08:08 -0500)]
media: v4l2-dev.h: fix symbol collision in media_entity_to_video_device()
A recent change to the media_entity_to_video_device() macro breaks some
use-cases for the macro due to a symbol collision. Before the change
this worked:
While after the change it results in a compiler error "error: 'struct
video_device' has no member named 'link'; did you mean 'lock'?". While
the following still works after the change.
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Wei Yongjun [Wed, 17 Jan 2018 11:24:52 +0000 (06:24 -0500)]
media: rcar_drif: fix error return code in rcar_drif_alloc_dmachannels()
Fix to return error code -ENODEV from the dma_request_slave_channel()
error handling case instead of 0, as done elsewhere in this function.
rc can be overwrite to 0 by dmaengine_slave_config() in the for loop.
media: usbtv: Add USB ID 1f71:3306 to the UTV007 driver
Add support for a new USB ID in this driver.
Signed-off-by: Ian Douglas Scott <ian@iandouglasscott.com>
[hans.verkuil@cisco.com: add commit message] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Tomasz Figa [Tue, 9 Jan 2018 08:42:47 +0000 (03:42 -0500)]
media: mtk-vcodec: Always signal source change event on format change
Currently the driver signals the source change event only in case of
a midstream resolution change, however the initial format detection
is also defined as a source change by the V4L2 codec API specification.
Fix this by signaling the event after the initial header is parsed as
well.
Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Wu-Cheng Li <wuchengli@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Oliver Neukum [Mon, 8 Jan 2018 14:21:07 +0000 (09:21 -0500)]
media: usbtv: prevent double free in error case
Quoting the original report:
It looks like there is a double-free vulnerability in Linux usbtv driver
on an error path of usbtv_probe function. When audio registration fails,
usbtv_video_free function ends up freeing usbtv data structure, which
gets freed the second time under usbtv_video_fail label.
usbtv_audio_fail:
usbtv_video_free(usbtv); =>
v4l2_device_put(&usbtv->v4l2_dev);
=> v4l2_device_put
=> kref_put
=> v4l2_device_release
=> usbtv_release (CALLBACK)
=> kfree(usbtv) (1st time)
usbtv_video_fail:
usb_set_intfdata(intf, NULL);
usb_put_dev(usbtv->udev);
kfree(usbtv); (2nd time)
So, as we have refcounting, use it
Reported-by: Yavuz, Tuba <tuba@ece.ufl.edu> Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Philipp Zabel [Thu, 4 Jan 2018 15:58:55 +0000 (10:58 -0500)]
media: coda: bump maximum number of internal framebuffers to 19
While the h.264 standard only allows up to 16 reference frames, the CODA
firmware needs two more buffers: one to hold the currently decoded frame
and one for the display frame. Adding the framebuffer needed by the
driver for VDOA operation brings the total to a maximum of 19 internal
framebuffers.
Lift the current maximum of 17 internal framebuffers to allow playback
of high profile streams that require more than 14 reference frames.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Arnd Bergmann [Thu, 4 Jan 2018 13:43:50 +0000 (08:43 -0500)]
media: au0828: fix VIDEO_V4L2 dependency
After the move of videobuf2 into the common directory, selecting the
au0828 driver with CONFIG_V4L2 disabled started causing a link failure,
as we now attempt to build videobuf2 but it still requires v4l2:
We want to be able to build the core au0828 support without V4L2,
so this makes the 'select' conditional on V4L2, and refines the
dependencies in VIDEO_AU0828_V4L2 so it can only be enabled in
the exact conditions that have VIDEOBUF2_VMALLOC reachable.
Fixes: 03fbdb2fc2b8 ("media: move videobuf2 to drivers/media/common") Fixes: 05439b1a3693 ("[media] media: au0828 - convert to use videobuf2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hugues Fruchet [Thu, 8 Feb 2018 12:22:14 +0000 (07:22 -0500)]
media: ov5640: fix framerate update
After a framerate update through s_frame_interval(), the new
framerate was not taken into account when streaming,
but was taken into account on next session.
This was due to sensor->current_mode not updated accordingly to new
framerate setting in ov5640_s_frame_interval().
Fix module_param(virtual_channel) permissions.
This problem was detected by checkpatch:
$ scripts/checkpatch.pl -f drivers/media/i2c/ov5640.c
ERROR: Use 4 digit octal (0777) not decimal permissions
+module_param(virtual_channel, int, 0);
Also add an error trace in case of virtual_channel not in
the valid range of values.
Jacopo Mondi [Wed, 24 Jan 2018 09:30:50 +0000 (04:30 -0500)]
media: v4l2: i2c: ov7670: Implement OF mbus configuration
ov7670 driver supports two optional properties supplied through platform
data, but currently does not support any standard video interface
property.
Add support through OF parsing for 2 generic properties (vsync and hsync
polarities) and for one custom property already supported through
platform data to suppress pixel clock output during horizontal
blanking.
While at there, check return value of register writes in set_fmt
function and rationalize spacings.
Signal polarities and pixel clock blanking verified through scope and
image capture.
Jacopo Mondi [Wed, 24 Jan 2018 09:30:49 +0000 (04:30 -0500)]
media: dt-bindings: Add OF properties to ov7670
Describe newly introduced OF properties for ov7670 image sensor.
The driver supports two standard properties to configure synchronism
signals polarities and one custom property already supported as
platform data options to suppress pixel clock during horizontal
blankings.
Re-phrase child nodes description while at there.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: i2c: ov9650: fix potential integer overflow in __ov965x_set_frame_interval
Cast fi->interval.numerator to u64 in order to avoid a potential integer
overflow. This variable is being used in a context that expects an
expression of type u64.
Addresses-Coverity-ID: 1324146 ("Unintentional integer overflow")
[Sakari Ailus: use do_div() to make this work on 32-bit systems]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Akinobu Mita [Sun, 21 Jan 2018 15:14:14 +0000 (10:14 -0500)]
media: ov9650: support device tree probing
The ov9650 driver currently only supports legacy platform data probe.
This change adds device tree probing.
There has been an attempt to add device tree support for ov9650 driver
by Hugues Fruchet as a part of the patchset that adds support of OV9655
camera (http://www.spinics.net/lists/linux-media/msg117903.html), but
it wasn't merged into mainline because creating a separate driver for
OV9655 is preferred.
This is very similar to Hugues's patch, but not supporting new device.
Akinobu Mita [Sun, 21 Jan 2018 15:14:15 +0000 (10:14 -0500)]
media: MAINTAINERS: add entry for ov9650 driver
This adds an entry to the MAINTAINERS file for ov9650 driver. The
following persons are added in this entry.
* Sakari as a person who looks after media sensor driver patches
* Sylwester as a module author
* Myself as a person who has the hardware and can test the patches
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Shunqian Zheng [Tue, 16 Jan 2018 09:22:01 +0000 (04:22 -0500)]
media: ov2685: add support for OV2685 sensor
This patch adds driver for Omnivision's ov2685 sensor.
Though the ov2685 can output yuv data, this driver only
supports the raw bayer format, including the following features:
- output 1600x1200 at 30fps
- test patterns
- manual exposure/gain control
- vblank and hblank
- media controller
- runtime pm
Shunqian Zheng [Tue, 16 Jan 2018 09:21:59 +0000 (04:21 -0500)]
media: ov5695: add support for OV5695 sensor
This patch adds driver for Omnivision's ov5695 sensor,
the driver supports following features:
- supported resolutions
+ 2592x1944 at 30fps
+ 1920x1080 at 30fps
+ 1296x972 at 60fps
+ 1280x720 at 30fps
+ 640x480 at 120fps
- test patterns
- manual exposure/gain(analog and digital) control
- vblank and hblank
- media controller
- runtime pm
Hans Verkuil [Tue, 16 Jan 2018 11:02:45 +0000 (06:02 -0500)]
media: mt9t031: deprecate, move to staging
This driver is unused and depends on the deprecated soc-camera framework.
Move it to staging in preparation for being removed unless someone does
the work to convert it to a proper V4L2 subdev driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hans Verkuil [Tue, 16 Jan 2018 11:02:44 +0000 (06:02 -0500)]
media: imx074: deprecate, move to staging
This driver is unused and depends on the deprecated soc-camera framework.
Move it to staging in preparation for being removed unless someone does
the work to convert it to a proper V4L2 subdev driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Yong Zhi [Fri, 9 Feb 2018 00:14:24 +0000 (19:14 -0500)]
media: intel-ipu3: cio2: Disable and sync irq before stream off
This is to avoid pending interrupts to be handled during
stream off, in which case, the ready buffer will be removed
from buffer list, thus not all buffers can be returned to VB2
as expected. Disable CIO2 irq at cio2_hw_exit() so no new
interrupts are generated.
Jasmin Jessich [Sun, 14 Jan 2018 10:21:43 +0000 (05:21 -0500)]
media: uvcvideo: Fixed ktime_t to ns conversion
Commit 828ee8c71950 ("media: uvcvideo: Use ktime_t for timestamps")
changed to use ktime_t for timestamps. Older Kernels use a struct for
ktime_t, which requires the conversion function ktime_to_ns to be used on
some places. With this patch it will compile now also for older Kernel
versions.
Laurent Pinchart [Tue, 16 Jan 2018 17:45:36 +0000 (12:45 -0500)]
media: uvcvideo: Use parentheses around sizeof operand
While the sizeof is an operator and not a function, the preferred coding
style in the kernel is to enclose its operand in parentheses. To avoid
mixing multiple coding styles in the driver, use parentheses around all
sizeof operands.
While at it replace a kmalloc() with a kmalloc_array() to silence a
checkpatch warning triggered by this patch.
Skip duplicate dimensions in enum_framesizes, let enum_frameintervals list
the intervals from both frame descriptors. Change set_streamparm to switch
to the correct frame index when changing the interval. This enables 90 fps
capture on a Lenovo Explorer Windows Mixed Reality headset.
[laurent.pinchart@ideasonboard.com: Renamed tmp_ival to ival]
Edgar Thier [Thu, 12 Oct 2017 07:54:17 +0000 (03:54 -0400)]
media: uvcvideo: Apply flags from device to actual properties
Use flags the device exposes for UVC controls.
This allows the device to define which property flags are set.
Since some cameras offer auto-adjustments for properties (e.g. auto-gain),
the values of other properties (e.g. gain) can change in the camera.
Examining the flags ensures that the driver is aware of such properties.
Tim Harvey [Thu, 15 Feb 2018 17:55:33 +0000 (12:55 -0500)]
media: dt-bindings: Add bindings for TDA1997X
Define the device tree bindings for the TDA1997X.
Acked-by: Rob Herring <robh@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: make a proper commit message] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Tim Harvey [Thu, 15 Feb 2018 17:55:32 +0000 (12:55 -0500)]
media: MAINTAINERS: add entry for NXP TDA1997x driver
Add new MAINTAINERS entry.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: make a proper commit message] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Tim Harvey [Thu, 15 Feb 2018 17:55:30 +0000 (12:55 -0500)]
media: v4l-ioctl: fix clearing pad for VIDIOC_DV_TIMINGS_CAP
The pad field was inadvertently cleared. Fix this. It's needed for subdevs.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: make a proper commit message] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the v4l2_hdmi_colorimetry() function so we have a single function
that determines the colorspace, YCbCr encoding, quantization range and
transfer function from the InfoFrame data.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These sensor drivers have use case specific mode lists. This is currently
not used nor there is a standard API for selecting the mode list. Disable
configurations for non-preview modes until configuration selection is
improved so that all the configurations are always usable.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[hans.verkuil@cisco.com: clarify that this functionality it currently unused] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sakari Ailus [Sun, 21 Jan 2018 21:43:42 +0000 (16:43 -0500)]
media: staging: atomisp: Kill subdev s_parm abuse
Remove sensor driver's interface for setting the use case specific mode
list as well as the mode lists that are related to other than
CI_MODE_PREVIEW. This removes s_parm abuse in using driver specific values
in v4l2_streamparm.capture.capturemode. The drivers already support
[gs]_frame_interval so removing support for [gs]_parm is enough.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Mon, 12 Feb 2018 14:00:28 +0000 (09:00 -0500)]
media: rc: get start time just before calling driver tx
The current code gets the start time before copying the IR from
userspace (could cause page faults) and encoding IR. This means
that the gap calculation could be off.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Florian Echtler [Thu, 8 Feb 2018 08:43:05 +0000 (03:43 -0500)]
media: add panel register access functions
These functions provide write access to the internal LCD panel registers
which also control the sensor. They can be used to disable the
preprocessor, set the illumination brightness, and adjust gain/contrast
(which are stored together in one register internally called "vsvideo").
Florian Echtler [Thu, 8 Feb 2018 08:43:03 +0000 (03:43 -0500)]
media: add missing blob structure field for tag id
The SUR40 can recognize specific printed patterns directly in hardware;
this information (i.e. the pattern id) is present but currently unused
in the blob structure.
Linus Torvalds [Sun, 11 Feb 2018 22:34:03 +0000 (14:34 -0800)]
vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>