Josef Bacik [Wed, 19 Jun 2019 17:47:20 +0000 (13:47 -0400)]
btrfs: cleanup the target logic in __btrfs_block_rsv_release
This works for all callers already, but if we wanted to use the helper
for the global_block_rsv it would end up trying to refill itself. Fix
the logic to be able to be used no matter which block rsv is passed in
to this helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 19 Jun 2019 17:47:19 +0000 (13:47 -0400)]
btrfs: export __btrfs_block_rsv_release
The delalloc reserve stuff calls this directly because it cares about
the qgroup accounting stuff, so export it so we can move it around. Fix
btrfs_block_rsv_release() to just be a static inline since it just calls
__btrfs_block_rsv_release() with NULL for the qgroup stuff.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: Simplify update of space_info in __reserve_metadata_bytes()
We don't need an if-else-if chain where we can use a simple OR since
both conditions are performing the same action. The short-circuit for OR
will ensure that if the first condition is true, can_overcommit() is not
called.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 18 Jun 2019 18:00:16 +0000 (20:00 +0200)]
btrfs: lift bio_set_dev from bio allocation helpers
The block device is passed around for the only purpose to set it in new
bios. Move the assignment one level up. This is a preparatory patch for
further bdev cleanups.
David Sterba [Tue, 18 Jun 2019 18:00:13 +0000 (20:00 +0200)]
btrfs: use raid_attr for minimum stripe count in btrfs_calc_avail_data_space
Minimum stripe count matches the minimum devices required for a given
profile. The open coded assignments match the raid_attr table.
What's changed here is the meaning for RAID5/6. Previously their
min_stripes would be 1, while newly it's devs_min. This however shold be
the same as before because it's not possible to create filesystem on
fewer devices than the raid_attr table allows.
There's no adjustment regarding the parity stripes (like
calc_data_stripes does), because we're interested in overall space that
would fit on the devices.
Missing devices make no difference for the whole calculation, we have
the size stored in the structures.
David Sterba [Tue, 18 Jun 2019 18:00:08 +0000 (20:00 +0200)]
btrfs: drop default value assignments in enums
A few more instances whre we don't need to specify the values as long as
they are the same that enum assigns automatically. All of the enums are
in-memory only and nothing relies on the exact values.
Josef Bacik [Tue, 18 Jun 2019 14:59:18 +0000 (10:59 -0400)]
btrfs: run delayed iput at unlink time
We have been seeing issues in production where a cleaner script will end
up unlinking a bunch of files that have pending iputs. This means they
will get their final iput's run at btrfs-cleaner time and thus are not
throttled, which impacts the workload.
Since we are unlinking these files we can just drop the delayed iput at
unlink time. We are already holding a reference to the inode so this
will not be the final iput and thus is completely safe to do at this
point. Doing this means we are more likely to be doing the final iput
at unlink time, and thus will get the IO charged to the caller and get
throttled appropriately without affecting the main workload.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 19 Jun 2019 12:05:50 +0000 (13:05 +0100)]
Btrfs: add missing inode version, ctime and mtime updates when punching hole
If the range for which we are punching a hole covers only part of a page,
we end up updating the inode item but we skip the update of the inode's
iversion, mtime and ctime. Fix that by ensuring we update those properties
of the inode.
A patch for fstests test case generic/059 that tests this as been sent
along with this fix.
Fixes: 2aaa66558172b0 ("Btrfs: add hole punching") Fixes: e8c1c76e804b18 ("Btrfs: add missing inode update when punching hole") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 19 Jun 2019 12:05:39 +0000 (13:05 +0100)]
Btrfs: fix fsync not persisting dentry deletions due to inode evictions
In order to avoid searches on a log tree when unlinking an inode, we check
if the inode being unlinked was logged in the current transaction, as well
as the inode of its parent directory. When any of the inodes are logged,
we proceed to delete directory items and inode reference items from the
log, to ensure that if a subsequent fsync of only the inode being unlinked
or only of the parent directory when the other is not fsync'ed as well,
does not result in the entry still existing after a power failure.
That check however is not reliable when one of the inodes involved (the
one being unlinked or its parent directory's inode) is evicted, since the
logged_trans field is transient, that is, it is not stored on disk, so it
is lost when the inode is evicted and loaded into memory again (which is
set to zero on load). As a consequence the checks currently being done by
btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log() always
return true if the inode was evicted before, regardless of the inode
having been logged or not before (and in the current transaction), this
results in the dentry being unlinked still existing after a log replay
if after the unlink operation only one of the inodes involved is fsync'ed.
# Keep an open file descriptor on our directory while we evict inodes.
# We just want to evict the file's inode, the directory's inode must not
# be evicted.
$ ( cd /mnt/dir; while true; do :; done ) &
$ pid=$!
# Wait a bit to give time to background process to chdir to our test
# directory.
$ sleep 0.5
# Trigger eviction of the file's inode.
$ echo 2 > /proc/sys/vm/drop_caches
# Unlink our file and fsync the parent directory. After a power failure
# we don't expect to see the file anymore, since we fsync'ed the parent
# directory.
$ rm -f $SCRATCH_MNT/dir/foo
$ xfs_io -c fsync /mnt/dir
<power failure>
$ mount /dev/sdb /mnt
$ ls /mnt/dir
foo
$
--> file still there, unlink not persisted despite explicit fsync on dir
Fix this by checking if the inode has the full_sync bit set in its runtime
flags as well, since that bit is set everytime an inode is loaded from
disk, or for other less common cases such as after a shrinking truncate
or failure to allocate extent maps for holes, and gets cleared after the
first fsync. Also consider the inode as possibly logged only if it was
last modified in the current transaction (besides having the full_fsync
flag set).
Fixes: 3a5f1d458ad161 ("Btrfs: Optimize btree walking while logging inodes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Jun 2019 09:05:05 +0000 (12:05 +0300)]
btrfs: Use btrfs_get_io_geometry appropriately
Presently btrfs_map_block is used not only to do everything necessary to
map a bio to the underlying allocation profile but it's also used to
identify how much data could be written based on btrfs' stripe logic
without actually submitting anything. This is achieved by passing NULL
for 'bbio_ret' parameter.
This patch refactors all callers that require just the mapping length
by switching them to using btrfs_io_geometry instead of calling
btrfs_map_block with a special NULL value for 'bbio_ret'. No functional
change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Jun 2019 09:05:03 +0000 (12:05 +0300)]
btrfs: Introduce btrfs_io_geometry infrastructure
Add a structure that holds various parameters for IO calculations and a
helper that fills the values. This will help further refactoring and
reduction of functions that in some way open-coded the calculations.
Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 13 Jun 2019 15:55:03 +0000 (17:55 +0200)]
btrfs: improve messages when updating feature flags
Currently the messages printed after setting an incompat feature are
cryptis, we can easily make it better as the textual description is
passed to the helpers. Old:
Arnd Bergmann [Mon, 17 Jun 2019 11:07:28 +0000 (13:07 +0200)]
btrfs: shut up bogus -Wmaybe-uninitialized warning
gcc sometimes can't determine whether a variable has been initialized
when both the initialization and the use are conditional:
fs/btrfs/props.c: In function 'inherit_props':
fs/btrfs/props.c:389:4: error: 'num_bytes' may be used uninitialized in this function [-Werror=maybe-uninitialized]
btrfs_block_rsv_release(fs_info, trans->block_rsv,
This code is fine. Unfortunately, I cannot think of a good way to
rephrase it in a way that makes gcc understand this, so I add a bogus
initialization the way one should not.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Sterba <dsterba@suse.com>
[ gcc 8 and 9 don't emit the warning ] Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 22 Apr 2019 15:44:09 +0000 (16:44 +0100)]
Btrfs: prevent send failures and crashes due to concurrent relocation
Send always operates on read-only trees and always expected that while it
is in progress, nothing changes in those trees. Due to that expectation
and the fact that send is a read-only operation, it operates on commit
roots and does not hold transaction handles. However relocation can COW
nodes and leafs from read-only trees, which can cause unexpected failures
and crashes (hitting BUG_ONs). while send using a node/leaf, it gets
COWed, the transaction used to COW it is committed, a new transaction
starts, the extent previously used for that node/leaf gets allocated,
possibly for another tree, and the respective extent buffer' content
changes while send is still using it. When this happens send normally
fails with EIO being returned to user space and messages like the
following are found in dmesg/syslog:
[ 3408.699121] BTRFS error (device sdc): parent transid verify failed on 58703872 wanted 250 found 253
[ 3441.523123] BTRFS error (device sdc): did not find backref in send_root. inode=63211, offset=0, disk_byte=5222825984 found extent=5222825984
Other times, less often, we hit a BUG_ON() because an extent buffer that
send is using used to be a node, and while send is still using it, it
got COWed and got reused as a leaf while send is still using, producing
the following trace:
Another possibility, much less likely to happen, is that send will not
fail but the contents of the stream it produces may not be correct.
To avoid this, do not allow send and relocation (balance) to run in
parallel. In the long term the goal is to allow for both to be able to
run concurrently without any problems, but that will take a significant
effort in development and testing.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 31 May 2019 13:39:31 +0000 (15:39 +0200)]
btrfs: add mask for all RAID1 types
Preparatory patch for additional RAID1 profiles with more copies. The
mask will contain 3-copy and 4-copy, most of the checks for plain RAID1
work the same for the other profiles.
Qu Wenruo [Thu, 13 Jun 2019 09:31:24 +0000 (17:31 +0800)]
btrfs: qgroup: Don't hold qgroup_ioctl_lock in btrfs_qgroup_inherit()
[BUG]
Lockdep will report the following circular locking dependency:
WARNING: possible circular locking dependency detected
5.2.0-rc2-custom #24 Tainted: G O
------------------------------------------------------
btrfs/8631 is trying to acquire lock: 000000002536438c (&fs_info->qgroup_ioctl_lock#2){+.+.}, at: btrfs_qgroup_inherit+0x40/0x620 [btrfs]
but task is already holding lock: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
[CAUSE]
Due to the delayed subvolume creation, we need to call
btrfs_qgroup_inherit() inside commit transaction code, with a lot of
other mutex hold.
This hell of lock chain can lead to above problem.
[FIX]
On the other hand, we don't really need to hold qgroup_ioctl_lock if
we're in the context of create_pending_snapshot().
As in that context, we're the only one being able to modify qgroup.
All other qgroup functions which needs qgroup_ioctl_lock are either
holding a transaction handle, or will start a new transaction:
Functions will start a new transaction():
* btrfs_quota_enable()
* btrfs_quota_disable()
Functions hold a transaction handler:
* btrfs_add_qgroup_relation()
* btrfs_del_qgroup_relation()
* btrfs_create_qgroup()
* btrfs_remove_qgroup()
* btrfs_limit_qgroup()
* btrfs_qgroup_inherit() call inside create_subvol()
So we have a higher level protection provided by transaction, thus we
don't need to always hold qgroup_ioctl_lock in btrfs_qgroup_inherit().
Only the btrfs_qgroup_inherit() call in create_subvol() needs to hold
qgroup_ioctl_lock, while the btrfs_qgroup_inherit() call in
create_pending_snapshot() is already protected by transaction.
So the fix is to detect the context by checking
trans->transaction->state.
If we're at TRANS_STATE_COMMIT_DOING, then we're in commit transaction
context and no need to get the mutex.
Reported-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
[ 1843.525936] Memory state around the buggy address:
[ 1843.526975] ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479] ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877] ^
[ 1843.533287] ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874] ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================
This is caused by supplying a too short compression value ('lz') in the
test-case and comparing it to 'lzo' with strncmp() and a length of 3.
strncmp() read past the 'lz' when looking for the 'o' and thus caused an
out-of-bounds read.
Introduce a new check 'btrfs_compress_is_valid_type()' which not only
checks the user-supplied value against known compression types, but also
employs checks for too short values.
Reported-by: Nikolay Borisov <nborisov@suse.com> Fixes: 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 7 Jun 2019 10:25:24 +0000 (11:25 +0100)]
Btrfs: fix data loss after inode eviction, renaming it, and fsync it
When we log an inode, regardless of logging it completely or only that it
exists, we always update it as logged (logged_trans and last_log_commit
fields of the inode are updated). This is generally fine and avoids future
attempts to log it from having to do repeated work that brings no value.
However, if we write data to a file, then evict its inode after all the
dealloc was flushed (and ordered extents completed), rename the file and
fsync it, we end up not logging the new extents, since the rename may
result in logging that the inode exists in case the parent directory was
logged before. The following reproducer shows and explains how this can
happen:
# Do a direct IO write instead of a buffered write because with a
# buffered write we would need to make sure dealloc gets flushed and
# complete before we do the inode eviction later, and we can not do that
# from user space with call to things such as sync(2) since that results
# in a transaction commit as well.
$ xfs_io -d -c "pwrite -S 0xd3 0 4K" /mnt/dir/bar
# Keep the directory dir in use while we evict inodes. We want our file
# bar's inode to be evicted but we don't want our directory's inode to
# be evicted (if it were evicted too, we would not be able to reproduce
# the issue since the first fsync below, of file foo, would result in a
# transaction commit.
$ ( cd /mnt/dir; while true; do :; done ) &
$ pid=$!
# Wait a bit to give time for the background process to chdir.
$ sleep 0.1
# Evict all inodes, except the inode for the directory dir because it is
# currently in use by our background process.
$ echo 2 > /proc/sys/vm/drop_caches
# fsync file foo, which ends up persisting information about the parent
# directory because it is a new inode.
$ xfs_io -c fsync /mnt/dir/foo
# Rename bar, this results in logging that this inode exists (inode item,
# names, xattrs) because the parent directory is in the log.
$ mv /mnt/dir/bar /mnt/dir/baz
# Now fsync baz, which ends up doing absolutely nothing because of the
# rename operation which logged that the inode exists only.
$ xfs_io -c fsync /mnt/dir/baz
<power failure>
$ mount /dev/sdb /mnt
$ od -t x1 -A d /mnt/dir/baz 0000000
--> Empty file, data we wrote is missing.
Fix this by not updating last_sub_trans of an inode when we are logging
only that it exists and the inode was not yet logged since it was loaded
from disk (full_sync bit set), this is enough to make btrfs_inode_in_log()
return false for this scenario and make us log the inode. The logged_trans
of the inode is still always setsince that alone is used to track if names
need to be deleted as part of unlink operations.
Fixes: 257c62e1bce03e ("Btrfs: avoid tree log commit when there are no changes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 11 Jun 2019 12:31:01 +0000 (14:31 +0200)]
btrfs: raid56: clear incompat block group flags after removing the last one
The incompat bit for RAID56 is set either at mount time or automatically
when the profile is used by balance. The part where the bit is removed
is missing and can be unexpected or undesired when an older kernel is
needed.
This patch will drop the incompat bit after this command, assuming
that RAID5 profile is not used by system or metadata:
David Sterba [Wed, 3 Apr 2019 17:32:56 +0000 (19:32 +0200)]
btrfs: tests: add locks around add_extent_mapping
There are no concerns about locking during the selftests so the locks
are not necessary, but following patches will add lockdep assertions to
add_extent_mapping so this is needed in tests too.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 5 Jun 2019 11:50:04 +0000 (14:50 +0300)]
btrfs: Document __etree_search
The function has a lot of return values and specific conventions making
it cumbersome to understand what's returned. Have a go at documenting
its parameters and return values.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Jun 2019 10:06:02 +0000 (13:06 +0300)]
btrfs: Don't trim returned range based on input value in find_first_clear_extent_bit
Currently find_first_clear_extent_bit always returns a range whose
starting value is >= passed 'start'. This implicit trimming behavior is
somewhat subtle and an implementation detail.
Instead, this patch modifies the function such that now it always
returns the range which contains passed 'start' and has the given bits
unset. This range could either be due to presence of existing records
which contains 'start' but have the bits unset or because there are no
records that contain the given starting offset.
This patch also adds test cases which cover find_first_clear_extent_bit
since they were missing up until now.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Jun 2019 10:06:01 +0000 (13:06 +0300)]
btrfs: trim: make reserved device area adjustments more explicit
Currently the first megabyte on a device housing a btrfs filesystem is
exempt from allocation and trimming. Currently this is not a problem
since 'start' is set to 1M at the beginning of btrfs_trim_free_extents
and find_first_clear_extent_bit always returns a range that is >= start.
However, in a follow up patch find_first_clear_extent_bit will be
changed such that it will return a range containing 'start' and this
range may very well be 0...>=1M so 'start'.
Future proof the sole user of find_first_clear_extent_bit by setting
'start' after the function is called. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: remove assumption about csum type form btrfs_print_data_csum_error()
btrfs_print_data_csum_error() still assumed checksums to be 32 bit in
size. Make it size agnostic.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: directly call into crypto framework for checksumming
Currently btrfs_csum_data() relied on the crc32c() wrapper around the
crypto framework for calculating the CRCs.
As we have our own crypto_shash structure in the fs_info now, we can
directly call into the crypto framework without going trough the wrapper.
This way we can even remove the btrfs_csum_data() and btrfs_csum_final()
wrappers.
The module dependency on crc32c is preserved via MODULE_SOFTDEP("pre:
crc32c"), which was previously provided by LIBCRC32C config option doing
the same.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: add boilerplate code for directly including the crypto framework
Add boilerplate code for directly including the crypto framework. This
helps us flipping the switch for new algorithms.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: Simplify btrfs_check_super_csum() and get rid of size assumptions
Now that we have already checked for a valid checksum type before
calling btrfs_check_super_csum(), it can be simplified even further.
While at it get rid of the implicit size assumption of the resulting
checksum as well.
This is a preparation for changing all checksum functionality to use the
crypto layer later.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: check for supported superblock checksum type before checksum validation
Now that we have factorerd out the superblock checksum type validation,
we can check for supported superblock checksum types before doing the
actual validation of the superblock read from disk.
This leads the path to further simplifications of
btrfs_check_super_csum() later on.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ] Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs is only supporting CRC32C as checksumming algorithm. As
this is about to change provide a function to validate the checksum type
in the superblock against all possible algorithms.
This makes adding new algorithms easier as there are fewer places to
adjust when adding new algorithms.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: format checksums according to type for printing
Add a small helper for btrfs_print_data_csum_error() which formats the
checksum according to it's type for pretty printing.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com>
[ shorten macro name ] Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS has the implicit assumption that a checksum in btrfs_orderd_sums
is 4 bytes. While this is true for CRC32C, it is not for any other
checksum.
Change the data type to be a byte array and adjust loop index
calculation accordingly.
This includes moving the adjustment of 'index' by 'ins_size' in
btrfs_csum_file_blocks() before dividing 'ins_size' by the checksum
size, because before this patch the 'sums' member of 'struct
btrfs_ordered_sum' was 4 Bytes in size and afterwards it is only one
byte.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: use btrfs_crc32c{,_final}() in for free space cache
The CRC checksum in the free space cache is not dependant on the super
block's csum_type field but always a CRC32C.
So use btrfs_crc32c() and btrfs_crc32c_final() instead of
btrfs_csum_data() and btrfs_csum_final() for computing these checksums.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9678c54388b6 ("btrfs: Remove custom crc32c init code") removed
the btrfs_crc32c() function, because it was a duplicate of the crc32c()
library function we already have in the kernel.
Resurrect it as a shim wrapper over crc32c() to make following
transformations of the checksumming code in btrfs easier.
Also provide a btrfs_crc32_final() to ease following transformations.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: use btrfs_csum_data() instead of directly calling crc32c
btrfsic_test_for_metadata() directly calls the crc32c() library function
for calculating the CRC32C checksum, but then uses btrfs_csum_final() to
invert the result.
To ease further refactoring and development around checksumming in BTRFS
convert to calling btrfs_csum_data(), which is a wrapper around
crc32c().
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
# Prealloc one extent
xfs_io -f -c "falloc 8k 64m" $mnt/file1
# Fill the remaining data space
xfs_io -f -c "pwrite 0 -b 4k 512M" $mnt/padding
sync
# Write into the prealloc extent
xfs_io -c "pwrite 1m 16m" $mnt/file1
# Reflink then fsync, fsync would fail due to ENOSPC
xfs_io -c "reflink $mnt/file1 8k 0 4k" -c "fsync" $mnt/file1
umount $dev
The fsync fails with ENOSPC, and the last page of the buffered write is
lost.
[CAUSE]
This is caused by:
- Btrfs' back reference only has extent level granularity
So write into shared extent must be COWed even only part of the extent
is shared.
So for above script we have:
- fallocate
Create a preallocated extent where we can do NOCOW write.
- fill all the remaining data and unallocated space
- buffered write into preallocated space
As we have not enough space available for data and the extent is not
shared (yet) we fall into NOCOW mode.
- reflink
Now part of the large preallocated extent is shared, later write
into that extent must be COWed.
- fsync triggers writeback
But now the extent is shared and therefore we must fallback into COW
mode, which fails with ENOSPC since there's not enough space to
allocate data extents.
[WORKAROUND]
The workaround is to ensure any buffered write in the related extents
(not just the reflink source range) get flushed before reflink/dedupe,
so that NOCOW writes succeed that happened before reflinking succeed.
The workaround is expensive, we could do it better by only flushing
NOCOW range, but that needs extra accounting for NOCOW range.
For now, fix the possible data loss first.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 7 May 2019 07:23:46 +0000 (10:23 +0300)]
btrfs: Return EAGAIN if we can't start no snpashot write in check_can_nocow
The first thing code does in check_can_nocow is trying to block
concurrent snapshots. If this fails (due to snpashot already being in
progress) the function returns ENOSPC which makes no sense. Instead
return EAGAIN. Despite this return value not being propagated to callers
it's good practice to return the closest in terms of semantics error
code. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 7 May 2019 07:19:24 +0000 (10:19 +0300)]
btrfs: Always use a cached extent_state in btrfs_lock_and_flush_ordered_range
In case no cached_state argument is passed to
btrfs_lock_and_flush_ordered_range use one locally in the function. This
optimises the case when an ordered extent is found since the unlock
function will be able to unlock that state directly without searching
for it again.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 7 May 2019 07:19:23 +0000 (10:19 +0300)]
btrfs: Use newly introduced btrfs_lock_and_flush_ordered_range
There several functions which open code
btrfs_lock_and_flush_ordered_range, just replace them with a call to the
function. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 7 May 2019 07:19:22 +0000 (10:19 +0300)]
btrfs: add new helper btrfs_lock_and_flush_ordered_range
There is a certain idiom used in multiple places in btrfs' codebase,
dealing with flushing an ordered range. Factor this in a separate
function that can be reused. Future patches will replace the existing
code with that function.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 9 May 2019 07:31:50 +0000 (15:31 +0800)]
btrfs: remove the incorrect comment on RO fs when btrfs_run_delalloc_range() fails
At the context of btrfs_run_delalloc_range(), we haven't started/joined
a transaction, thus even something went wrong, we can't and won't abort
transaction, thus no way to make the fs RO.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 17 May 2019 09:43:36 +0000 (11:43 +0200)]
btrfs: use u8 for raid_array members
The raid_attr table is now 7 * 56 = 392 bytes long, consisting of just
small numbers so we don't have to use ints. New size is 7 * 32 = 224,
saving 3 cachelines.
David Sterba [Fri, 17 May 2019 09:43:29 +0000 (11:43 +0200)]
btrfs: use raid_attr table to find profiles for integrity lowering
Replace open coded list of the profiles by selecting them from the
raid_attr table. The criteria are now more explicit, we need profiles
that have more than 1 copy of the data or can reconstruct the data with
a missing device.
David Sterba [Fri, 17 May 2019 09:43:17 +0000 (11:43 +0200)]
btrfs: remove mapping tree structures indirection
fs_info::mapping_tree is the physical<->logical mapping tree and uses
the same underlying structure as extents, but is embedded to another
structure. There are no other members and this indirection is useless.
No functional change.
David Sterba [Fri, 17 May 2019 09:43:15 +0000 (11:43 +0200)]
btrfs: raid56: allow the exact minimum number of devices for balance convert
The minimum number of devices for RAID5 is 2, though this is only a bit
expensive RAID1, and for RAID6 it's 3, which is a triple copy that works
only 3 devices.
mkfs.btrfs allows that and mounting such filesystem also works, so the
conversion via balance filters is inconsistent with the others and we
should not prevent it.
David Sterba [Fri, 17 May 2019 09:43:13 +0000 (11:43 +0200)]
btrfs: fix minimum number of chunk errors for DUP
The list of profiles in btrfs_chunk_max_errors lists DUP as a profile
DUP able to tolerate 1 device missing. Though this profile is special
with 2 copies, it still needs the device, unlike the others.
Looking at the history of changes, thre's no clear reason why DUP is
there, functions were refactored and blocks of code merged to one
helper.
d20983b40e828 Btrfs: fix writing data into the seed filesystem
- factor code to a helper
de11cc12df173 Btrfs: don't pre-allocate btrfs bio
- unrelated change, DUP still in the list with max errors 1
a236aed14ccb0 Btrfs: Deal with failed writes in mirrored configurations
- introduced the max errors, leaves DUP and RAID1 in the same group
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Tue, 11 Sep 2018 22:06:25 +0000 (06:06 +0800)]
Btrfs: remove unused variables in __btrfs_unlink_inode
This code was first introduced in 5f39d397dfbe ("Btrfs: Create
extent_buffer interface for large blocksizes") and the function was
named btrfs_unlink_trans. It later got renamed to __btrfs_unlink_inode
and finally commit 16cdcec736cd ("btrfs: implement delayed inode items
operation") changed the way inodes are deleted and obviated the need for
those two members.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ replace changelog by Nikolay's version ] Signed-off-by: David Sterba <dsterba@suse.com>
This is a leftover from 312c89fbca06 ("btrfs: cleanup btrfs_mount()
using btrfs_mount_root()"), the mode was used for opening devices that's
not done here anymore.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Su Yue [Wed, 28 Nov 2018 03:21:12 +0000 (11:21 +0800)]
btrfs: switch order of unlocks of space_info and bg in do_trimming()
In function do_trimming(), block_group->lock should be unlocked first,
as the locks should be released in the reverse order. This does not
cause problems but should follow the best practices.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
For num_bytes part, we can detect such overflow along with file offset
(key->offset), as file_offset + num_bytes should never go beyond u64.
For ram_bytes part, it's about the decompressed size of the extent, not
directly related to the size.
In theory it is OK to have a large value, and put extra limitation
on RAM bytes may cause unexpected false alerts.
So in tree-checker, we only check if the file offset and num bytes
overflow.
Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 14 May 2019 10:54:45 +0000 (13:54 +0300)]
btrfs: Remove redundant assignment of tgt_device->commit_total_bytes
This is already done in btrfs_init_dev_replace_tgtdev which is the first
phase of device replace, called before doing scrub. During that time
exclusive lock is held. Additionally btrfs_fs_device::commit_total_bytes
is always set based on the size of the underlying block device which
shouldn't change once set. This makes the 2nd assignment of the variable
in the finishing phase redundant.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 14 May 2019 10:54:43 +0000 (13:54 +0300)]
btrfs: Explicitly reserve space for devreplace item
Part of device replace involves writing an item to the device root
containing information about pending replace operations. Currently space
for this item is not being explicitly reserved so this works thanks to
presence of global reserve. While not fatal it's not a good practice.
Let's be explicit about space requirement of device replace and reserve
space when starting the transaction.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 14 May 2019 10:54:42 +0000 (13:54 +0300)]
btrfs: Streamline replace sem unlock in btrfs_dev_replace_start
There are only 2 branches which goto leave label with need_unlock set
to true. Essentially need_unlock is used as a substitute for directly
calling up_write. Since the branches needing this are only 2 and their
context is not that big it's more clear to just call up_write where
required. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 14 May 2019 10:54:41 +0000 (13:54 +0300)]
btrfs: Ensure btrfs_init_dev_replace_tgtdev sees up to date values
btrfs_init_dev_replace_tgtdev reads certain values from the source
device (such as commit_total_bytes) which are updated during transaction
commit. Currently this function is called before committing any pending
transaction, leading to possibly reading outdated values.
Fix this by moving the function below the transaction commit, at this
point the EXCL_OP bit it set hence once transaction is complete the
total size of the device cannot be changed (it's usually changed by
resize/remove ops which are blocked).
Fixes: 9e271ae27e44 ("Btrfs: kernel operation should come after user input has been verified") Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 14 May 2019 10:54:40 +0000 (13:54 +0300)]
btrfs: dev-replace: Remove impossible WARN_ON
This WARN_ON can never trigger because src_device cannot be null.
btrfs_find_device_by_devspec always returns either an error or a valid
pointer to the device. Just remove it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 14 May 2019 10:54:39 +0000 (13:54 +0300)]
btrfs: Reduce critical section in btrfs_init_dev_replace_tgtdev
There is no point in holding btrfs_fs_devices::device_list_mutex
while initialising fields of the not-yet-published device. Instead,
hold the mutex only when the newly initialised device is being
published. I think holding device_list_mutex here is redundant
altogether, because at this point BTRFS_FS_EXCL_OP is set which
prevents device removal/addition/balance/resize to occur.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 14 May 2019 10:54:38 +0000 (13:54 +0300)]
btrfs: Don't opencode sync_blockdev in btrfs_init_dev_replace_tgtdev
Using sync_blockdev makes it plain obvious what's happening. No
functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 15 May 2019 13:31:04 +0000 (15:31 +0200)]
btrfs: fiemap: preallocate ulists for btrfs_check_shared
btrfs_check_shared looks up parents of a given extent and uses ulists
for that. These are allocated and freed repeatedly. Preallocation in the
caller will avoid the overhead and also allow us to use the GFP_KERNEL
as it is happens before the extent locks are taken.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 16 May 2019 11:39:59 +0000 (13:39 +0200)]
btrfs: detect fast implementation of crc32c on all architectures
Currently, there's only check for fast crc32c implementation on X86,
based on the CPU flags. This is used to decide if checksumming should be
offloaded to worker threads or can be calculated by the caller.
As there are more architectures that implement a faster version of
crc32c (ARM, SPARC, s390, MIPS, PowerPC), also there are specialized hw
cards.
The detection is based on driver name, all generic C implementations
contain 'generic', while the specialized versions do not. Alternatively
the priority could be used, but this is not currently provided by the
crypto API.
The flag is set per-filesystem at mount time and used for the offloading
decisions.
Qu Wenruo [Tue, 14 May 2019 23:33:48 +0000 (07:33 +0800)]
btrfs: extent-tree: Refactor add_pinned_bytes() to add|sub_pinned_bytes()
Instead of using @sign to determine whether we're adding or subtracting.
Even it only has 3 callers, it's still (and in fact already caused
problem in the past) confusing to use.
Refactor add_pinned_bytes() to add_pinned_bytes() and sub_pinned_bytes()
to explicitly show what we're doing.
Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 30 Jun 2019 03:20:52 +0000 (11:20 +0800)]
Merge tag 'powerpc-5.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a regression in my commit adding KUAP (Kernel User Access
Prevention) on Radix, which incorrectly touched the AMR in the early
machine check handler.
Thanks to Nicholas Piggin"
* tag 'powerpc-5.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/exception: Fix machine check early corrupting AMR
Linus Torvalds [Sun, 30 Jun 2019 03:19:17 +0000 (11:19 +0800)]
Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP fixes from Thomas Gleixner:
"Two small changes for the cpu hotplug code:
- Prevent out of bounds access which actually might crash the machine
caused by a missing bounds check in the fail injection code
- Warn about unsupported migitation mode command line arguments to
make people aware that they typoed the paramater. Not necessarily a
fix but quite some people tripped over that"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Fix out-of-bounds read when setting fail state
cpu/speculation: Warn on unsupported mitigations= parameter
Linus Torvalds [Sat, 29 Jun 2019 11:42:30 +0000 (19:42 +0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes all over the place:
- might_sleep() atomicity fix in the microcode loader
- resctrl boundary condition fix
- APIC arithmethics bug fix for frequencies >= 4.2 GHz
- three 5-level paging crash fixes
- two speculation fixes
- a perf/stacktrace fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fall back to using frame pointers for generated code
perf/x86: Always store regs->ip in perf_callchain_kernel()
x86/speculation: Allow guests to use SSBD even if host does not
x86/mm: Handle physical-virtual alignment mismatch in phys_p4d_init()
x86/boot/64: Add missing fixup_pointer() for next_early_pgt access
x86/boot/64: Fix crash if kernel image crosses page table boundary
x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz
x86/resctrl: Prevent possible overrun during bitmap operations
x86/microcode: Fix the microcode load on CPU hotplug for real
Linus Torvalds [Sat, 29 Jun 2019 11:39:17 +0000 (19:39 +0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Various fixes, most of them related to bugs perf fuzzing found in the
x86 code"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/regs: Use PERF_REG_EXTENDED_MASK
perf/x86: Remove pmu->pebs_no_xmm_regs
perf/x86: Clean up PEBS_XMM_REGS
perf/x86/regs: Check reserved bits
perf/x86: Disable extended registers for non-supported PMUs
perf/ioctl: Add check for the sample_period value
perf/core: Fix perf_sample_regs_user() mm check
Linus Torvalds [Sat, 29 Jun 2019 11:36:53 +0000 (19:36 +0800)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Diverse irqchip driver fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix command queue pointer comparison bug
irqchip/mips-gic: Use the correct local interrupt map registers
irqchip/ti-sci-inta: Fix kernel crash if irq_create_fwspec_mapping fail
irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus