From 135eae49c6cc5186145d1d5bcc375ee82ab60d36 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 27 Apr 2018 17:39:00 +0530 Subject: [PATCH] ARM: dts: dra7-evm: Model EVM_3V6 regulator On TI's DRA74x EVM, EVM_3V6 is connected is connected to the VBAT line of the wilink card. Model it here so that it can be used while adding wilink8 WLAN support. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 42 ++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index f1425b0f3a54..181289a28ca1 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -20,6 +20,16 @@ memory@0 { reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; + evm_12v0: fixedregulator-evm_12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + evm_1v8_sw: fixedregulator-evm_1v8 { compatible = "regulator-fixed"; regulator-name = "evm_1v8"; @@ -54,6 +64,38 @@ aic_dvdd: fixedregulator-aic_dvdd { regulator-max-microvolt = <1800000>; }; + evm_3v3: fixedregulator-evm3v3 { + /* Output of Cntlr A of TPS43351-Q1 on dra7-evm */ + compatible = "regulator-fixed"; + regulator-name = "evm_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + evm_5v0: fixedregulator-evm_5v0 { + /* Output of Cntlr B of TPS43351-Q1 on dra7-evm */ + compatible = "regulator-fixed"; + regulator-name = "evm_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + evm_3v6: fixedregulator-evm_3v6 { + compatible = "regulator-fixed"; + regulator-name = "evm_3v6"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + vin-supply = <&evm_5v0>; + regulator-always-on; + regulator-boot-on; + }; + extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; -- 2.45.2