From 1877d2c5f5cff2f4115d702a1223a0f0d66cdb36 Mon Sep 17 00:00:00 2001 From: Mark Greer Date: Tue, 25 Apr 2017 15:43:54 -0700 Subject: [PATCH] NFC: trf7970a: Enable pins are active high not active low The example DTS code for the trf7970a sets the GPIOs for the EN and EN2 pins to active low when they are really active high so correct the error. Acked-by: Rob Herring Signed-off-by: Mark Greer Signed-off-by: Samuel Ortiz --- Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 57cb52c94783..a24a93a4b010 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -36,8 +36,8 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): spi-max-frequency = <2000000>; interrupt-parent = <&gpio2>; interrupts = <14 0>; - ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, - <&gpio2 5 GPIO_ACTIVE_LOW>; + ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>, + <&gpio2 5 GPIO_ACTIVE_HIGH>; vin-supply = <&ldo3_reg>; vdd-io-supply = <&ldo2_reg>; autosuspend-delay = <30000>; -- 2.45.2