From 3a3e11647315c1238ff9544e6d9c17396d7e48ec Mon Sep 17 00:00:00 2001 From: "Bird, Tim" Date: Mon, 17 Oct 2016 17:42:50 -0700 Subject: [PATCH] dt-bindings: power: supply: Add otg regulator binding Add a binding for the regulator which controls the OTG chargepath switch. The OTG switch gets its power from pm8941_5vs1, and that should be expressed as a usb_otg_in-supply property in the DT node for the charger driver. The regulator name is "otg-vbus". Signed-off-by: Tim Bird Acked-by: Bjorn Andersson Reviewed-by: Andy Gross Acked-by: Rob Herring Signed-off-by: Stephen Boyd Signed-off-by: Sebastian Reichel --- .../bindings/power/supply/qcom_smbb.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt index 65b88fac854b..06f8a5ddb68e 100644 --- a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt +++ b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt @@ -105,6 +105,22 @@ PROPERTIES regulation must be done externally to fully comply with the JEITA safety guidelines if this flag is set. +- usb_otg_in-supply: + Usage: optional + Value type: + Description: Reference to the regulator supplying power to the USB_OTG_IN + pin. + +child nodes: +- otg-vbus: + Usage: optional + Description: This node defines a regulator used to control the direction + of VBUS voltage - specifically: whether to supply voltage + to VBUS for host mode operation of the OTG port, or allow + input voltage from external VBUS for charging. In the + hardware, the supply for this regulator comes from + usb_otg_in-supply. + EXAMPLE charger@1000 { compatible = "qcom,pm8941-charger"; @@ -128,4 +144,7 @@ charger@1000 { qcom,fast-charge-current-limit = <1000000>; qcom,dc-charge-current-limit = <1000000>; + usb_otg_in-supply = <&pm8941_5vs1>; + + otg-vbus {}; }; -- 2.45.2