From 3b6c2179eebf4536d08cf966c9f585dd95c72367 Mon Sep 17 00:00:00 2001 From: Catherine Sullivan Date: Thu, 3 Sep 2015 17:18:52 -0400 Subject: [PATCH] i40e: Remove 100M SGMII unless hw is X722 Only the X722 device now supports 100M SGMII, and nothing supports 100M on 1000Base_T. Change-ID: I6f44dcd818944edd40041410e6de380f4a359a0c Signed-off-by: Catherine Sullivan Signed-off-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/i40e/i40e_ethtool.c | 42 ++++++++++++------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 185ac91ce78f..b31139127616 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -255,7 +255,8 @@ static void i40e_partition_setting_complaint(struct i40e_pf *pf) **/ static void i40e_get_settings_link_up(struct i40e_hw *hw, struct ethtool_cmd *ecmd, - struct net_device *netdev) + struct net_device *netdev, + struct i40e_pf *pf) { struct i40e_link_status *hw_link_info = &hw->phy.link_info; u32 link_speed = hw_link_info->link_speed; @@ -299,16 +300,18 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw, break; case I40E_PHY_TYPE_10GBASE_T: case I40E_PHY_TYPE_1000BASE_T: - case I40E_PHY_TYPE_100BASE_TX: ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_10000baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_100baseT_Full; + SUPPORTED_1000baseT_Full; ecmd->advertising = ADVERTISED_Autoneg; if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB) ecmd->advertising |= ADVERTISED_10000baseT_Full; if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB) ecmd->advertising |= ADVERTISED_1000baseT_Full; + break; + case I40E_PHY_TYPE_100BASE_TX: + ecmd->supported = SUPPORTED_Autoneg | + SUPPORTED_100baseT_Full; if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB) ecmd->advertising |= ADVERTISED_100baseT_Full; break; @@ -328,12 +331,15 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw, break; case I40E_PHY_TYPE_SGMII: ecmd->supported = SUPPORTED_Autoneg | - SUPPORTED_1000baseT_Full | - SUPPORTED_100baseT_Full; + SUPPORTED_1000baseT_Full; if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB) ecmd->advertising |= ADVERTISED_1000baseT_Full; - if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB) - ecmd->advertising |= ADVERTISED_100baseT_Full; + if (pf->hw.mac.type == I40E_MAC_X722) { + ecmd->supported |= SUPPORTED_100baseT_Full; + if (hw_link_info->requested_speeds & + I40E_LINK_SPEED_100MB) + ecmd->advertising |= ADVERTISED_100baseT_Full; + } break; /* Backplane is set based on supported phy types in get_settings * so don't set anything here but don't warn either @@ -381,7 +387,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw, * Reports link settings that can be determined when link is down **/ static void i40e_get_settings_link_down(struct i40e_hw *hw, - struct ethtool_cmd *ecmd) + struct ethtool_cmd *ecmd, + struct i40e_pf *pf) { enum i40e_aq_capabilities_phy_type phy_types = hw->phy.phy_types; @@ -392,11 +399,13 @@ static void i40e_get_settings_link_down(struct i40e_hw *hw, ecmd->advertising = 0x0; if (phy_types & I40E_CAP_PHY_TYPE_SGMII) { ecmd->supported |= SUPPORTED_Autoneg | - SUPPORTED_1000baseT_Full | - SUPPORTED_100baseT_Full; + SUPPORTED_1000baseT_Full; ecmd->advertising |= ADVERTISED_Autoneg | - ADVERTISED_1000baseT_Full | - ADVERTISED_100baseT_Full; + ADVERTISED_1000baseT_Full; + if (pf->hw.mac.type == I40E_MAC_X722) { + ecmd->supported |= SUPPORTED_100baseT_Full; + ecmd->advertising |= ADVERTISED_100baseT_Full; + } } if (phy_types & I40E_CAP_PHY_TYPE_XAUI || phy_types & I40E_CAP_PHY_TYPE_XFI || @@ -425,7 +434,8 @@ static void i40e_get_settings_link_down(struct i40e_hw *hw, ecmd->advertising |= ADVERTISED_Autoneg | ADVERTISED_40000baseCR4_Full; } - if (phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) { + if ((phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) && + !(phy_types & I40E_CAP_PHY_TYPE_1000BASE_T)) { ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_100baseT_Full; ecmd->advertising |= ADVERTISED_Autoneg | @@ -467,9 +477,9 @@ static int i40e_get_settings(struct net_device *netdev, bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP; if (link_up) - i40e_get_settings_link_up(hw, ecmd, netdev); + i40e_get_settings_link_up(hw, ecmd, netdev, pf); else - i40e_get_settings_link_down(hw, ecmd); + i40e_get_settings_link_down(hw, ecmd, pf); /* Now set the settings that don't rely on link being up/down */ -- 2.45.2