From 407b0b1e0ea3be171c324dd5a717ec52391faaab Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 27 Sep 2017 12:36:53 -0700 Subject: [PATCH] dt-bindings: Document the Raspberry Pi Touchscreen nodes. This doesn't yet cover input, but the driver does get the display working when the firmware is disabled from talking to our I2C lines. Signed-off-by: Eric Anholt Acked-by: Rob Herring Link: https://patchwork.freedesktop.org/patch/msgid/20170927193654.12609-3-eric@anholt.net --- .../panel/raspberrypi,7inch-touchscreen.txt | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt new file mode 100644 index 000000000000..e9e19c059260 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt @@ -0,0 +1,49 @@ +This binding covers the official 7" (800x480) Raspberry Pi touchscreen +panel. + +This DSI panel contains: + +- TC358762 DSI->DPI bridge +- Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight +- Touchscreen controller on I2C for touch input + +and this binding covers the DSI display parts but not its touch input. + +Required properties: +- compatible: Must be "raspberrypi,7inch-touchscreen-panel" +- reg: Must be "45" +- port: See panel-common.txt + +Example: + +dsi1: dsi@7e700000 { + #address-cells = <1>; + #size-cells = <0>; + <...> + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; +}; + +i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio 28 0 + &gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; +}; -- 2.45.2