From 42c1add97073b5a701b8aee0fdb69ef0345d4c50 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Feb 2014 21:32:44 +0000 Subject: [PATCH] mmc: sdhci-spear: remove support for power gpio None of this code is currently used: there are no definitions of struct sdhci_plat_data in arch/arm, neither are there any DT properties which use card_power_gpio/power_active_high/power_always_enb. In any case, slot power control should be rigged up via vmmc and the regulator subsystem in the DT case. Signed-off-by: Russell King Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-spear.c | 32 -------------------------------- include/linux/mmc/sdhci-spear.h | 8 -------- 2 files changed, 40 deletions(-) diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index fc6eac5b1064..676df4623057 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -56,14 +56,6 @@ static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id) gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH; irq_set_irq_type(irq, gpio_irq_type); - if (sdhci->data->card_power_gpio >= 0) { - if (!sdhci->data->power_always_enb) { - /* if card inserted, give power, otherwise remove it */ - val = sdhci->data->power_active_high ? !val : val ; - gpio_set_value(sdhci->data->card_power_gpio, val); - } - } - /* inform sdhci driver about card insertion/removal */ tasklet_schedule(&host->card_tasklet); @@ -179,30 +171,6 @@ static int sdhci_probe(struct platform_device *pdev) if (!sdhci->data) return 0; - if (sdhci->data->card_power_gpio >= 0) { - int val = 0; - - ret = devm_gpio_request(&pdev->dev, - sdhci->data->card_power_gpio, "sdhci"); - if (ret < 0) { - dev_dbg(&pdev->dev, "gpio request fail: %d\n", - sdhci->data->card_power_gpio); - goto set_drvdata; - } - - if (sdhci->data->power_always_enb) - val = sdhci->data->power_active_high; - else - val = !sdhci->data->power_active_high; - - ret = gpio_direction_output(sdhci->data->card_power_gpio, val); - if (ret) { - dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", - sdhci->data->card_power_gpio); - goto set_drvdata; - } - } - if (sdhci->data->card_int_gpio >= 0) { ret = devm_gpio_request(&pdev->dev, sdhci->data->card_int_gpio, "sdhci"); diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h index e78c0e236e9d..8cc095a76cf8 100644 --- a/include/linux/mmc/sdhci-spear.h +++ b/include/linux/mmc/sdhci-spear.h @@ -18,17 +18,9 @@ /* * struct sdhci_plat_data: spear sdhci platform data structure * - * @card_power_gpio: gpio pin for enabling/disabling power to sdhci socket - * @power_active_high: if set, enable power to sdhci socket by setting - * card_power_gpio - * @power_always_enb: If set, then enable power on probe, otherwise enable only - * on card insertion and disable on card removal. * card_int_gpio: gpio pin used for card detection */ struct sdhci_plat_data { - int card_power_gpio; - int power_active_high; - int power_always_enb; int card_int_gpio; }; -- 2.45.2