From 446411e18b2cb17d153e45f634a3c9a79ada3ac2 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 13 Feb 2013 14:20:25 +0100 Subject: [PATCH] spi: Initialize cs_gpio and cs_gpios with -ENOENT The return value from of_get_named_gpio is -ENOENT when the given index matches a hole in the "cs-gpios" property phandle list. However, the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master is -EINVAL, which is documented to indicate that a GPIO line should not be used for the given spi_device. This sets the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master to -ENOENT. Thus, -ENOENT is the only value used to indicate that no GPIO line should be used. Signed-off-by: Andreas Larsson Signed-off-by: Grant Likely --- drivers/spi/spi.c | 4 ++-- include/linux/spi/spi.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 004b10f184d4..bcca66c5107f 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -334,7 +334,7 @@ struct spi_device *spi_alloc_device(struct spi_master *master) spi->dev.parent = &master->dev; spi->dev.bus = &spi_bus_type; spi->dev.release = spidev_release; - spi->cs_gpio = -EINVAL; + spi->cs_gpio = -ENOENT; device_initialize(&spi->dev); return spi; } @@ -1079,7 +1079,7 @@ static int of_spi_register_master(struct spi_master *master) return -ENOMEM; for (i = 0; i < master->num_chipselect; i++) - cs[i] = -EINVAL; + cs[i] = -ENOENT; for (i = 0; i < nb; i++) cs[i] = of_get_named_gpio(np, "cs-gpios", i); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 38c2b925923d..c395f32b53b3 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -57,7 +57,7 @@ extern struct bus_type spi_bus_type; * @modalias: Name of the driver to use with this device, or an alias * for that name. This appears in the sysfs "modalias" attribute * for driver coldplugging, and in uevents used for hotplugging - * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when + * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when * when not using a GPIO line) * * A @spi_device is used to interchange data between an SPI slave @@ -261,7 +261,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS - * number. Any individual value may be -EINVAL for CS lines that + * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). * * Each SPI master controller can communicate with one or more @spi_device -- 2.45.2