From 48f80609e536bc9be12c64e4c6c69625baee7b02 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Fri, 16 Mar 2018 15:35:38 -0700 Subject: [PATCH] usb: dwc3: Make TX/RX threshold configurable DWC_usb31 periodic transfer at 48K+ bytes per interval may need modification to the TX/RX packet threshold to achieve optimal result. Add properties to make it configurable. By default, periodic ESS TX and RX threshold are not enabled. To enable TX or RX threshold (host mode only), both packet threshold count and max burst size properties must be set to a valid non-zero value 1-16. DWC_usb31 programming guide section 1.2.3 and 1.2.4. Cc: John Youn Reviewed-by: Rob Herring Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/dwc3.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 44e8bab159ad..0dbd3083e7dd 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -57,6 +57,22 @@ Optional properties: - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame length adjustment when the fladj_30mhz_sdbnd signal is invalid or incorrect. + - snps,rx-thr-num-pkt-prd: periodic ESS RX packet threshold count - host mode + only. Set this and rx-max-burst-prd to a valid, + non-zero value 1-16 (DWC_usb31 programming guide + section 1.2.4) to enable periodic ESS RX threshold. + - snps,rx-max-burst-prd: max periodic ESS RX burst size - host mode only. Set + this and rx-thr-num-pkt-prd to a valid, non-zero value + 1-16 (DWC_usb31 programming guide section 1.2.4) to + enable periodic ESS RX threshold. + - snps,tx-thr-num-pkt-prd: periodic ESS TX packet threshold count - host mode + only. Set this and tx-max-burst-prd to a valid, + non-zero value 1-16 (DWC_usb31 programming guide + section 1.2.3) to enable periodic ESS TX threshold. + - snps,tx-max-burst-prd: max periodic ESS TX burst size - host mode only. Set + this and tx-thr-num-pkt-prd to a valid, non-zero value + 1-16 (DWC_usb31 programming guide section 1.2.3) to + enable periodic ESS TX threshold. - tx-fifo-resize: determines if the FIFO *has* to be reallocated. -- 2.45.2