From 4d3186a525b3f6af7d5f468e94b79b9e92cf3853 Mon Sep 17 00:00:00 2001 From: Remi Pommarel Date: Sun, 1 Sep 2019 15:39:15 +0200 Subject: [PATCH] PCI: amlogic: Fix reset assertion via gpio descriptor Normally asserting reset signal on gpio would be achieved with: gpiod_set_value_cansleep(reset_gpio, 1); Meson PCI driver set reset value to '0' instead of '1' as it takes into account the PERST# signal polarity. The polarity should be taken care in the device tree instead. This fixes the reset assertion meaning and moves out the polarity configuration in DT (please note that there is no DT currently using this driver). Signed-off-by: Remi Pommarel Signed-off-by: Lorenzo Pieralisi Reviewed-by: Martin Blumenstingl Reviewed-by: Neil Armstrong --- drivers/pci/controller/dwc/pci-meson.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c index e35e9eaa50ee..541f37a6f6a5 100644 --- a/drivers/pci/controller/dwc/pci-meson.c +++ b/drivers/pci/controller/dwc/pci-meson.c @@ -287,9 +287,9 @@ static inline void meson_cfg_writel(struct meson_pcie *mp, u32 val, u32 reg) static void meson_pcie_assert_reset(struct meson_pcie *mp) { - gpiod_set_value_cansleep(mp->reset_gpio, 0); - udelay(500); gpiod_set_value_cansleep(mp->reset_gpio, 1); + udelay(500); + gpiod_set_value_cansleep(mp->reset_gpio, 0); } static void meson_pcie_init_dw(struct meson_pcie *mp) -- 2.45.2