From 5264d2749fa3a52bc3adf3937c284590cf0b3ecf Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 24 Apr 2015 11:57:06 +0200 Subject: [PATCH] ARM: tegra: Add missing HDMI +5V regulator Commit fb50a116bbbc ("drm/tegra: hdmi - Add connector supply support") introduced a new supply for HDMI connectors that is used to control the voltage on the +5V pin. Not all boards have had the corresponding supply added to their device tree files, causing the following warning message during boot: [ 0.859698] 54280000.hdmi supply hdmi not found, using dummy regulator Add such a regulator to the Seaboard DTS to enable the driver to control this voltage and get rid of the warning. Reported-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra20-seaboard.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index e2fed2712249..aea8994b35f2 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -31,6 +31,7 @@ hdmi@54280000 { vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; + hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) @@ -893,6 +894,17 @@ vdd_bl_reg: regulator@5 { gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_hdmi: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "VDDIO_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_reg>; + }; }; sound { -- 2.45.2