From 60fd011bfaaae91f0f795621ba80d6f5d46ca966 Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Thu, 22 May 2014 19:44:18 +0300 Subject: [PATCH] mfd: ti-keystone-devctrl: Add bindings for device state control The Keystone II devices have a set of registers that are used to control the status of its peripherals. This node is intended to allow access to this functionality. Reviewed-by: Arnd Bergmann Signed-off-by: Ivan Khoronzhuk Signed-off-by: Lee Jones --- .../bindings/mfd/ti-keystone-devctrl.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt new file mode 100644 index 000000000000..20963c76b4bc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt @@ -0,0 +1,19 @@ +* Device tree bindings for Texas Instruments keystone device state control + +The Keystone II devices have a set of registers that are used to control +the status of its peripherals. This node is intended to allow access to +this functionality. + +Required properties: + +- compatible: "ti,keystone-devctrl", "syscon" + +- reg: contains offset/length value for device state control + registers space. + +Example: + +devctrl: device-state-control@0x02620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; +}; -- 2.45.2