From 62d77ff7ecbff1377d5a167f18156bc69cdbaf25 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 27 Jun 2019 17:31:45 +0200 Subject: [PATCH] dt-bindings: net: Add a YAML schemas for the generic MDIO options The MDIO buses have a number of available device tree properties that can be used in their device tree node. Add a YAML schemas for those. Suggested-by: Andrew Lunn Signed-off-by: Maxime Ripard Reviewed-by: Andrew Lunn Reviewed-by: Rob Herring Signed-off-by: Rob Herring --- .../devicetree/bindings/net/mdio.txt | 38 +------------- .../devicetree/bindings/net/mdio.yaml | 51 +++++++++++++++++++ 2 files changed, 52 insertions(+), 37 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt index e3e1603f256c..cf8a0105488e 100644 --- a/Documentation/devicetree/bindings/net/mdio.txt +++ b/Documentation/devicetree/bindings/net/mdio.txt @@ -1,37 +1 @@ -Common MDIO bus properties. - -These are generic properties that can apply to any MDIO bus. - -Optional properties: -- reset-gpios: One GPIO that control the RESET lines of all PHYs on that MDIO - bus. -- reset-delay-us: RESET pulse width in microseconds. - -A list of child nodes, one per device on the bus is expected. These -should follow the generic phy.txt, or a device specific binding document. - -The 'reset-delay-us' indicates the RESET signal pulse width in microseconds and -applies to all PHY devices. It must therefore be appropriately determined based -on all PHY requirements (maximum value of all per-PHY RESET pulse widths). - -Example : -This example shows these optional properties, plus other properties -required for the TI Davinci MDIO driver. - - davinci_mdio: ethernet@5c030000 { - compatible = "ti,davinci_mdio"; - reg = <0x5c030000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - reset-delay-us = <2>; - - ethphy0: ethernet-phy@1 { - reg = <1>; - }; - - ethphy1: ethernet-phy@3 { - reg = <3>; - }; - }; +This file has moved to mdio.yaml. diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml new file mode 100644 index 000000000000..b8fa8251c4bc --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO Bus Generic Binding + +maintainers: + - Andrew Lunn + - Florian Fainelli + - Heiner Kallweit + +description: + These are generic properties that can apply to any MDIO bus. Any + MDIO bus must have a list of child nodes, one per device on the + bus. These should follow the generic ethernet-phy.yaml document, or + a device specific binding document. + +properties: + reset-gpios: + maxItems: 1 + description: + The phandle and specifier for the GPIO that controls the RESET + lines of all PHYs on that MDIO bus. + + reset-delay-us: + description: + RESET pulse width in microseconds. It applies to all PHY devices + and must therefore be appropriately determined based on all PHY + requirements (maximum value of all per-PHY RESET pulse widths). + +examples: + - | + davinci_mdio: mdio@5c030000 { + compatible = "ti,davinci_mdio"; + reg = <0x5c030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio2 5 1>; + reset-delay-us = <2>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + }; + + ethphy1: ethernet-phy@3 { + reg = <3>; + }; + }; -- 2.45.2