From 63bd0f19226dea7c373e961d7aebe4c5d8798ccc Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 28 Aug 2018 10:56:10 +0200 Subject: [PATCH] phy: rockchip-usb: add usb-uart setup for rk3188 The rk3188 also supports bringing the uart2 out through the usb dm+dp pins, so add the necessary setup for it. rk3066 does not seem to support usb-uart functionality and this particular phy was only used on older Rockchip socs, so this leaves room for a bit of cleanup as well, as there most likely won't be new additions in the driver. Signed-off-by: Heiko Stuebner Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/rockchip/phy-rockchip-usb.c | 141 ++++++++++++++++-------- 1 file changed, 95 insertions(+), 46 deletions(-) diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c index 269c86329cb8..b2899c744ad9 100644 --- a/drivers/phy/rockchip/phy-rockchip-usb.c +++ b/drivers/phy/rockchip/phy-rockchip-usb.c @@ -36,7 +36,22 @@ static int enable_usb_uart; #define HIWORD_UPDATE(val, mask) \ ((val) | (mask) << 16) -#define UOC_CON0_SIDDQ BIT(13) +#define UOC_CON0 0x00 +#define UOC_CON0_SIDDQ BIT(13) +#define UOC_CON0_DISABLE BIT(4) +#define UOC_CON0_COMMON_ON_N BIT(0) + +#define UOC_CON2 0x08 +#define UOC_CON2_SOFT_CON_SEL BIT(2) + +#define UOC_CON3 0x0c +/* bits present on rk3188 and rk3288 phys */ +#define UOC_CON3_UTMI_TERMSEL_FULLSPEED BIT(5) +#define UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3) +#define UOC_CON3_UTMI_XCVRSEELCT_MASK (3 << 3) +#define UOC_CON3_UTMI_OPMODE_NODRIVING (1 << 1) +#define UOC_CON3_UTMI_OPMODE_MASK (3 << 1) +#define UOC_CON3_UTMI_SUSPENDN BIT(0) struct rockchip_usb_phys { int reg; @@ -46,7 +61,8 @@ struct rockchip_usb_phys { struct rockchip_usb_phy_base; struct rockchip_usb_phy_pdata { struct rockchip_usb_phys *phys; - int (*init_usb_uart)(struct regmap *grf); + int (*init_usb_uart)(struct regmap *grf, + const struct rockchip_usb_phy_pdata *pdata); int usb_uart_phy; }; @@ -313,28 +329,88 @@ static const struct rockchip_usb_phy_pdata rk3066a_pdata = { }, }; +static int __init rockchip_init_usb_uart_common(struct regmap *grf, + const struct rockchip_usb_phy_pdata *pdata) +{ + int regoffs = pdata->phys[pdata->usb_uart_phy].reg; + int ret; + u32 val; + + /* + * COMMON_ON and DISABLE settings are described in the TRM, + * but were not present in the original code. + * Also disable the analog phy components to save power. + */ + val = HIWORD_UPDATE(UOC_CON0_COMMON_ON_N + | UOC_CON0_DISABLE + | UOC_CON0_SIDDQ, + UOC_CON0_COMMON_ON_N + | UOC_CON0_DISABLE + | UOC_CON0_SIDDQ); + ret = regmap_write(grf, regoffs + UOC_CON0, val); + if (ret) + return ret; + + val = HIWORD_UPDATE(UOC_CON2_SOFT_CON_SEL, + UOC_CON2_SOFT_CON_SEL); + ret = regmap_write(grf, regoffs + UOC_CON2, val); + if (ret) + return ret; + + val = HIWORD_UPDATE(UOC_CON3_UTMI_OPMODE_NODRIVING + | UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC + | UOC_CON3_UTMI_TERMSEL_FULLSPEED, + UOC_CON3_UTMI_SUSPENDN + | UOC_CON3_UTMI_OPMODE_MASK + | UOC_CON3_UTMI_XCVRSEELCT_MASK + | UOC_CON3_UTMI_TERMSEL_FULLSPEED); + ret = regmap_write(grf, UOC_CON3, val); + if (ret) + return ret; + + return 0; +} + +#define RK3188_UOC0_CON0 0x10c +#define RK3188_UOC0_CON0_BYPASSSEL BIT(9) +#define RK3188_UOC0_CON0_BYPASSDMEN BIT(8) + +/* + * Enable the bypass of uart2 data through the otg usb phy. + * See description of rk3288-variant for details. + */ +static int __init rk3188_init_usb_uart(struct regmap *grf, + const struct rockchip_usb_phy_pdata *pdata) +{ + u32 val; + int ret; + + ret = rockchip_init_usb_uart_common(grf, pdata); + if (ret) + return ret; + + val = HIWORD_UPDATE(RK3188_UOC0_CON0_BYPASSSEL + | RK3188_UOC0_CON0_BYPASSDMEN, + RK3188_UOC0_CON0_BYPASSSEL + | RK3188_UOC0_CON0_BYPASSDMEN); + ret = regmap_write(grf, RK3188_UOC0_CON0, val); + if (ret) + return ret; + + return 0; +} + static const struct rockchip_usb_phy_pdata rk3188_pdata = { .phys = (struct rockchip_usb_phys[]){ { .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" }, { .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" }, { /* sentinel */ } }, + .init_usb_uart = rk3188_init_usb_uart, + .usb_uart_phy = 0, }; -#define RK3288_UOC0_CON0 0x320 -#define RK3288_UOC0_CON0_COMMON_ON_N BIT(0) -#define RK3288_UOC0_CON0_DISABLE BIT(4) - -#define RK3288_UOC0_CON2 0x328 -#define RK3288_UOC0_CON2_SOFT_CON_SEL BIT(2) - #define RK3288_UOC0_CON3 0x32c -#define RK3288_UOC0_CON3_UTMI_SUSPENDN BIT(0) -#define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING (1 << 1) -#define RK3288_UOC0_CON3_UTMI_OPMODE_MASK (3 << 1) -#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3) -#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK (3 << 3) -#define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED BIT(5) #define RK3288_UOC0_CON3_BYPASSDMEN BIT(6) #define RK3288_UOC0_CON3_BYPASSSEL BIT(7) @@ -353,40 +429,13 @@ static const struct rockchip_usb_phy_pdata rk3188_pdata = { * * The actual code in the vendor kernel does some things differently. */ -static int __init rk3288_init_usb_uart(struct regmap *grf) +static int __init rk3288_init_usb_uart(struct regmap *grf, + const struct rockchip_usb_phy_pdata *pdata) { u32 val; int ret; - /* - * COMMON_ON and DISABLE settings are described in the TRM, - * but were not present in the original code. - * Also disable the analog phy components to save power. - */ - val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N - | RK3288_UOC0_CON0_DISABLE - | UOC_CON0_SIDDQ, - RK3288_UOC0_CON0_COMMON_ON_N - | RK3288_UOC0_CON0_DISABLE - | UOC_CON0_SIDDQ); - ret = regmap_write(grf, RK3288_UOC0_CON0, val); - if (ret) - return ret; - - val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL, - RK3288_UOC0_CON2_SOFT_CON_SEL); - ret = regmap_write(grf, RK3288_UOC0_CON2, val); - if (ret) - return ret; - - val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING - | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC - | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED, - RK3288_UOC0_CON3_UTMI_SUSPENDN - | RK3288_UOC0_CON3_UTMI_OPMODE_MASK - | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK - | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED); - ret = regmap_write(grf, RK3288_UOC0_CON3, val); + ret = rockchip_init_usb_uart_common(grf, pdata); if (ret) return ret; @@ -516,7 +565,7 @@ static int __init rockchip_init_usb_uart(void) return PTR_ERR(grf); } - ret = data->init_usb_uart(grf); + ret = data->init_usb_uart(grf, data); if (ret) { pr_err("%s: could not init usb_uart, %d\n", __func__, ret); enable_usb_uart = 0; -- 2.45.2