From 65b4eb9e351362ff8d41b873989e13a8fd35d13a Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Thu, 19 Dec 2013 09:23:03 -0500 Subject: [PATCH] staging: dwc2: update DT binding to add generic clock/phy properties dwc2/s3c-hsotg require a single clock to be specified and optionally a generic phy. On the s3c-hsotg driver old style USB phy support is present as a fallback so the generic phy properties are optional. Signed-off-by: Matt Porter Acked-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/staging/dwc2.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt index 1a1b7cfa4845..a1753ed0dd84 100644 --- a/Documentation/devicetree/bindings/staging/dwc2.txt +++ b/Documentation/devicetree/bindings/staging/dwc2.txt @@ -5,6 +5,14 @@ Required properties: - compatible : "snps,dwc2" - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt +- clocks: clock provider specifier +- clock-names: shall be "otg" +Refer to clk/clock-bindings.txt for generic clock consumer properties + +Optional properties: +- phys: phy provider specifier +- phy-names: shall be "device" +Refer to phy/phy-bindings.txt for generic phy consumer properties Example: @@ -12,4 +20,8 @@ Example: compatible = "ralink,rt3050-usb, snps,dwc2"; reg = <0x101c0000 40000>; interrupts = <18>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; }; -- 2.45.2