From 6b7b4b8941b727af5fdc73b6a0910ede4c06cf11 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 29 Oct 2014 17:40:41 +0000 Subject: [PATCH] ASoC: Intel: Add PM support to the HSW/BDW DSP core. Add support for PM wake, sleep and stall calls to the core HSW/BDW driver. This includes reworking the reset and boot code and adding new calls for setting D3/D0 state. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/intel/sst-haswell-dsp.c | 158 ++++++++++++++++++++++-------- 1 file changed, 119 insertions(+), 39 deletions(-) diff --git a/sound/soc/intel/sst-haswell-dsp.c b/sound/soc/intel/sst-haswell-dsp.c index 5058dc8bfed0..86aea343bfec 100644 --- a/sound/soc/intel/sst-haswell-dsp.c +++ b/sound/soc/intel/sst-haswell-dsp.c @@ -247,8 +247,67 @@ static irqreturn_t hsw_irq(int irq, void *context) return ret; } -static void hsw_boot(struct sst_dsp *sst) +static void hsw_set_dsp_D3(struct sst_dsp *sst) +{ + u32 val; + + /* switch off audio PLL, DRAM & IRAM blocks */ + val = readl(sst->addr.pci_cfg + SST_VDRTCTL0); + val |= SST_VDRTCL0_APLLSE_MASK | SST_VDRTCL0_DSRAMPGE_MASK | + SST_VDRTCL0_ISRAMPGE_MASK; + writel(val, sst->addr.pci_cfg + SST_VDRTCTL0); + + /* Set D3 state */ + val = readl(sst->addr.pci_cfg + SST_PMCS); + val |= SST_PMCS_PS_MASK; + writel(val, sst->addr.pci_cfg + SST_PMCS); +} + +static void hsw_reset(struct sst_dsp *sst) +{ + /* put DSP into reset and stall */ + sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, + SST_CSR_RST | SST_CSR_STALL, + SST_CSR_RST | SST_CSR_STALL); + + /* keep in reset for 10ms */ + mdelay(10); + + /* take DSP out of reset and keep stalled for FW loading */ + sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, + SST_CSR_RST | SST_CSR_STALL, SST_CSR_STALL); +} + +static int hsw_set_dsp_D0(struct sst_dsp *sst) { + int tries = 10; + u32 reg; + + /* Set D0 state */ + reg = readl(sst->addr.pci_cfg + SST_PMCS); + reg &= ~SST_PMCS_PS_MASK; + writel(reg, sst->addr.pci_cfg + SST_PMCS); + + /* check that ADSP shim is enabled */ + while (tries--) { + reg = readl(sst->addr.pci_cfg + SST_PMCS) & SST_PMCS_PS_MASK; + if (reg == 0) + goto finish; + + msleep(1); + } + + return -ENODEV; + +finish: + hsw_reset(sst); + + /* switch on audio PLL, DRAM & IRAM blocks */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); + reg &= ~(SST_VDRTCL0_APLLSE_MASK | SST_VDRTCL0_DSRAMPGE_MASK | + SST_VDRTCL0_ISRAMPGE_MASK); + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0); + /* select SSP1 19.2MHz base clock, SSP clock 0, turn off Low Power Clock */ sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, SST_CSR_S1IOCS | SST_CSR_SBCS1 | SST_CSR_LPCS, 0x0); @@ -267,30 +326,73 @@ static void hsw_boot(struct sst_dsp *sst) sst_dsp_shim_update_bits_unlocked(sst, SST_CSR2, SST_CSR2_SDFD_SSP1, SST_CSR2_SDFD_SSP1); - /* enable DMA engine 0,1 all channels to access host memory */ - sst_dsp_shim_update_bits_unlocked(sst, SST_HMDC, - SST_HMDC_HDDA1(0xff) | SST_HMDC_HDDA0(0xff), - SST_HMDC_HDDA1(0xff) | SST_HMDC_HDDA0(0xff)); + /* set on-demond mode on engine 0,1 for all channels */ + sst_dsp_shim_update_bits(sst, SST_HMDC, + SST_HMDC_HDDA_E0_ALLCH | SST_HMDC_HDDA_E1_ALLCH, + SST_HMDC_HDDA_E0_ALLCH | SST_HMDC_HDDA_E1_ALLCH); + + /* Enable Interrupt from both sides */ + sst_dsp_shim_update_bits(sst, SST_IMRX, (SST_IMRX_BUSY | SST_IMRX_DONE), + 0x0); + sst_dsp_shim_update_bits(sst, SST_IMRD, (SST_IMRD_DONE | SST_IMRD_BUSY | + SST_IMRD_SSP0 | SST_IMRD_DMAC), 0x0); + + /* clear IPC registers */ + sst_dsp_shim_write(sst, SST_IPCX, 0x0); + sst_dsp_shim_write(sst, SST_IPCD, 0x0); + sst_dsp_shim_write(sst, 0x80, 0x6); + sst_dsp_shim_write(sst, 0xe0, 0x300a); /* disable all clock gating */ writel(0x0, sst->addr.pci_cfg + SST_VDRTCTL2); + return 0; +} + +static void hsw_boot(struct sst_dsp *sst) +{ + /* set oportunistic mode on engine 0,1 for all channels */ + sst_dsp_shim_update_bits(sst, SST_HMDC, + SST_HMDC_HDDA_E0_ALLCH | SST_HMDC_HDDA_E1_ALLCH, 0); + /* set DSP to RUN */ sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, SST_CSR_STALL, 0x0); } -static void hsw_reset(struct sst_dsp *sst) +static void hsw_stall(struct sst_dsp *sst) { + /* stall DSP */ + sst_dsp_shim_update_bits(sst, SST_CSR, + SST_CSR_24MHZ_LPCS | SST_CSR_STALL, + SST_CSR_STALL | SST_CSR_24MHZ_LPCS); +} + +static void hsw_sleep(struct sst_dsp *sst) +{ + dev_dbg(sst->dev, "HSW_PM dsp runtime suspend\n"); + /* put DSP into reset and stall */ - sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, - SST_CSR_RST | SST_CSR_STALL, SST_CSR_RST | SST_CSR_STALL); + sst_dsp_shim_update_bits(sst, SST_CSR, + SST_CSR_24MHZ_LPCS | SST_CSR_RST | SST_CSR_STALL, + SST_CSR_RST | SST_CSR_STALL | SST_CSR_24MHZ_LPCS); - /* keep in reset for 10ms */ - mdelay(10); + hsw_set_dsp_D3(sst); + dev_dbg(sst->dev, "HSW_PM dsp runtime suspend exit\n"); +} - /* take DSP out of reset and keep stalled for FW loading */ - sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, - SST_CSR_RST | SST_CSR_STALL, SST_CSR_STALL); +static int hsw_wake(struct sst_dsp *sst) +{ + int ret; + + dev_dbg(sst->dev, "HSW_PM dsp runtime resume\n"); + + ret = hsw_set_dsp_D0(sst); + if (ret < 0) + return ret; + + dev_dbg(sst->dev, "HSW_PM dsp runtime resume exit\n"); + + return 0; } struct sst_adsp_memregion { @@ -431,27 +533,6 @@ static struct sst_block_ops sst_hsw_ops = { .disable = hsw_block_disable, }; -static int hsw_enable_shim(struct sst_dsp *sst) -{ - int tries = 10; - u32 reg; - - /* enable shim */ - reg = readl(sst->addr.pci_cfg + SST_SHIM_PM_REG); - writel(reg & ~0x3, sst->addr.pci_cfg + SST_SHIM_PM_REG); - - /* check that ADSP shim is enabled */ - while (tries--) { - reg = sst_dsp_shim_read_unlocked(sst, SST_CSR); - if (reg != 0xffffffff) - return 0; - - msleep(1); - } - - return -ENODEV; -} - static int hsw_init(struct sst_dsp *sst, struct sst_pdata *pdata) { const struct sst_adsp_memregion *region; @@ -490,7 +571,7 @@ static int hsw_init(struct sst_dsp *sst, struct sst_pdata *pdata) } /* enable the DSP SHIM */ - ret = hsw_enable_shim(sst); + ret = hsw_set_dsp_D0(sst); if (ret < 0) { dev_err(dev, "error: failed to set DSP D0 and reset SHIM\n"); return ret; @@ -500,10 +581,6 @@ static int hsw_init(struct sst_dsp *sst, struct sst_pdata *pdata) if (ret) return ret; - /* Enable Interrupt from both sides */ - sst_dsp_shim_update_bits_unlocked(sst, SST_IMRX, 0x3, 0x0); - sst_dsp_shim_update_bits_unlocked(sst, SST_IMRD, - (0x3 | 0x1 << 16 | 0x3 << 21), 0x0); /* register DSP memory blocks - ideally we should get this from ACPI */ for (i = 0; i < region_count; i++) { @@ -535,6 +612,9 @@ static void hsw_free(struct sst_dsp *sst) struct sst_ops haswell_ops = { .reset = hsw_reset, .boot = hsw_boot, + .stall = hsw_stall, + .wake = hsw_wake, + .sleep = hsw_sleep, .write = sst_shim32_write, .read = sst_shim32_read, .write64 = sst_shim32_write64, -- 2.45.2