From 78f8a0fae653d69ee87b6f2eabd82666f45d5a49 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Wed, 19 Oct 2016 10:28:20 +0800 Subject: [PATCH] dt-bindings: mt8173-xhci: support host side of dual-role mode Some resources, such as IPPC register etc, shared with device driver are moved into common glue layer when xHCI driver is the host side of dual-role mode and they should be changed as optional properties if they are required ones before. For clarity, add a new part of binding to support host side of dual-role mode. Additionally add optional properties of pinctrl for host only mode Signed-off-by: Chunfeng Yun Acked-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/mt8173-xhci.txt | 54 ++++++++++++++++++- 1 file changed, 52 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt index b3a7ffa48852..2a930bd52b94 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt @@ -2,10 +2,18 @@ MT8173 xHCI The device node for Mediatek SOC USB3.0 host controller +There are two scenarios: the first one only supports xHCI driver; +the second one supports dual-role mode, and the host is based on xHCI +driver. Take account of backward compatibility, we divide bindings +into two parts. + +1st: only supports xHCI driver +------------------------------------------------------------------------ + Required properties: - compatible : should contain "mediatek,mt8173-xhci" - - reg : specifies physical base address and size of the registers, - the first one for MAC, the second for IPPC + - reg : specifies physical base address and size of the registers + - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control - interrupts : interrupt used by the controller - power-domains : a phandle to USB power domain node to control USB's mtcmos @@ -27,12 +35,16 @@ Optional properties: control register, it depends on "mediatek,wakeup-src". - vbus-supply : reference to the VBUS regulator; - usb3-lpm-capable : supports USB3.0 LPM + - pinctrl-names : a pinctrl state named "default" must be defined + - pinctrl-0 : pin control group + See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt Example: usb30: usb@11270000 { compatible = "mediatek,mt8173-xhci"; reg = <0 0x11270000 0 0x1000>, <0 0x11280700 0 0x0100>; + reg-names = "mac", "ippc"; interrupts = ; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; clocks = <&topckgen CLK_TOP_USB30_SEL>, @@ -49,3 +61,41 @@ usb30: usb@11270000 { mediatek,syscon-wakeup = <&pericfg>; mediatek,wakeup-src = <1>; }; + +2nd: dual-role mode with xHCI driver +------------------------------------------------------------------------ + +In the case, xhci is added as subnode to mtu3. An example and the DT binding +details of mtu3 can be found in: +Documentation/devicetree/bindings/usb/mtu3.txt + +Required properties: + - compatible : should contain "mediatek,mt8173-xhci" + - reg : specifies physical base address and size of the registers + - reg-names: should be "mac" for xHCI MAC + - interrupts : interrupt used by the host controller + - power-domains : a phandle to USB power domain node to control USB's + mtcmos + - vusb33-supply : regulator of USB avdd3.3v + + - clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names + - clock-names : must be + "sys_ck": for clock of xHCI MAC + +Optional properties: + - vbus-supply : reference to the VBUS regulator; + - usb3-lpm-capable : supports USB3.0 LPM + +Example: +usb30: usb@11270000 { + compatible = "mediatek,mt8173-xhci"; + reg = <0 0x11270000 0 0x1000>; + reg-names = "mac"; + interrupts = ; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + vusb33-supply = <&mt6397_vusb_reg>; + usb3-lpm-capable; +}; -- 2.45.2