From 940293affa7ed7c0bdb1820ecf7a8f12e901d030 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 27 Apr 2018 17:39:03 +0530 Subject: [PATCH] ARM: dts: dra7: Use sdhci-omap programming model Use sdhci-omap programming model based on the generic sdhci library for programming the eMMC/SD/SDIO controller. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Tony Lindgren --- .../boot/dts/am57xx-beagle-x15-common.dtsi | 4 +-- arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + arch/arm/boot/dts/am57xx-idk-common.dtsi | 3 ++- arch/arm/boot/dts/dra7-evm.dts | 1 + arch/arm/boot/dts/dra7.dtsi | 27 +++++++------------ arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +- arch/arm/boot/dts/dra76-evm.dts | 3 ++- 7 files changed, 19 insertions(+), 22 deletions(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 6204a266212a..ad953113cefb 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -444,8 +444,8 @@ &mmc2 { vmmc-supply = <&vdd_3v3>; vqmmc-supply = <&vdd_3v3>; bus-width = <8>; - ti,non-removable; - cap-mmc-dual-data-rate; + non-removable; + no-1-8-v; }; &sata { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index c76ea6579a81..70a71c641066 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -25,6 +25,7 @@ &mmc1 { pinctrl-1 = <&mmc1_pins_hs>; vmmc-supply = <&ldo1_reg>; + no-1-8-v; }; &mmc2 { diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 43a6d0590f7c..ad87f1ae904d 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -412,8 +412,9 @@ &mmc2 { vmmc-supply = <&v3_3d>; vqmmc-supply = <&v3_3d>; bus-width = <8>; - ti,non-removable; + non-removable; max-frequency = <96000000>; + no-1-8-v; }; &dcan1 { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 704947cbef48..0894593860d6 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -377,6 +377,7 @@ &mmc2 { vmmc-supply = <&evm_1v8_sw>; vqmmc-supply = <&evm_1v8_sw>; bus-width = <8>; + non-removable; pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index f4ddd86f2c77..ae2f8dd46328 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1079,14 +1079,10 @@ i2c5: i2c@4807c000 { }; mmc1: mmc@4809c000 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,dra7-sdhci"; reg = <0x4809c000 0x400>; interrupts = ; ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&sdma_xbar 61>, <&sdma_xbar 62>; - dma-names = "tx", "rx"; status = "disabled"; pbias-supply = <&pbias_mmc_reg>; max-frequency = <192000000>; @@ -1100,40 +1096,37 @@ hdqw1w: 1w@480b2000 { }; mmc2: mmc@480b4000 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,dra7-sdhci"; reg = <0x480b4000 0x400>; interrupts = ; ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; - dma-names = "tx", "rx"; status = "disabled"; max-frequency = <192000000>; + /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */ + sdhci-caps-mask = <0x7 0x0>; }; mmc3: mmc@480ad000 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,dra7-sdhci"; reg = <0x480ad000 0x400>; interrupts = ; ti,hwmods = "mmc3"; - ti,needs-special-reset; - dmas = <&sdma_xbar 77>, <&sdma_xbar 78>; - dma-names = "tx", "rx"; status = "disabled"; /* Errata i887 limits max-frequency of MMC3 to 64 MHz */ max-frequency = <64000000>; + /* SDMA is not supported */ + sdhci-caps-mask = <0x0 0x400000>; }; mmc4: mmc@480d1000 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,dra7-sdhci"; reg = <0x480d1000 0x400>; interrupts = ; ti,hwmods = "mmc4"; - ti,needs-special-reset; - dmas = <&sdma_xbar 57>, <&sdma_xbar 58>; - dma-names = "tx", "rx"; status = "disabled"; max-frequency = <192000000>; + /* SDMA is not supported */ + sdhci-caps-mask = <0x0 0x400000>; }; mmu0_dsp1: mmu@40d01000 { diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index b81214051a89..df174f5c15d1 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -413,7 +413,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; bus-width = <8>; - ti,non-removable; + non-removable; max-frequency = <192000000>; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index ad154c7b0632..c07f0051844d 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -327,7 +327,7 @@ &cpu0 { &mmc1 { status = "okay"; vmmc-supply = <&vio_3v3_sd>; - vmmc_aux-supply = <&ldo4_reg>; + vqmmc-supply = <&ldo4_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode @@ -344,6 +344,7 @@ &mmc2 { vmmc-supply = <&vio_1v8>; vqmmc-supply = <&vio_1v8>; bus-width = <8>; + non-removable; pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_default>; -- 2.45.2