From 96ad6f0b8d7ec1d35dc3df87947e840b6a738380 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Fri, 24 Feb 2017 12:54:55 +0000 Subject: [PATCH] drm/rockchip: dw-mipi-dsi: allow commands in panel_disable Panel drivers may want to sent commands during the disable function, for example MIPI_DCS_SET_DISPLAY_OFF before the video signal ends. In order to send commands we need to write to registers, so pclk must be enabled. While changing this, remove the unnecessary code after the panel unprepare call which seems to be a workaround for a specific panel and thus belongs in the panel driver. Signed-off-by: John Keeping Reviewed-by: Chris Zhong Reviewed-by: Sean Paul Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-13-john@metanate.com --- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index 53515404d0ca..4201a2143295 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -848,24 +848,16 @@ static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder) { struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); - drm_panel_disable(dsi->panel); - if (clk_prepare_enable(dsi->pclk)) { dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__); return; } + drm_panel_disable(dsi->panel); + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); drm_panel_unprepare(dsi->panel); - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE); - /* - * This is necessary to make sure the peripheral will be driven - * normally when the display is enabled again later. - */ - msleep(120); - - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); dw_mipi_dsi_disable(dsi); clk_disable_unprepare(dsi->pclk); } -- 2.45.2